Gasifier Experimenters Kit

Gasifier Experimenters KitGasifier System ComponentsTechnical ResourcesGasification Worshop (June, 08)Sizing info for downdrafts and otherconfiguration info is on the resources pageAll the below material is open source and activelysupported by ALL Power Labs. You are welcometo use it for any personal or non-commercialfabrication. We request you acknowledge thesource and similarly post documentation forupdates and/or new additions you come up withfor the GEK.Using these materials for commericalmanufacturing requires a licensing agreementwith ALL Power Labs. The licensing fee is asimple 10% on retail sales. If you are going in thisdirection, please contact Jim Mason at"gek_(at)_allpowerlabs_(dot)_org for moredetails.(Note: The formal building instructions are still inprogress. In the interim, look at the pictures in thegallery to understand how the pieces in thedrawings below fit together. It is really verysimple- just flange rings and end plates welded onvessel tubes. All vessels are made with the samemethod.)V1.0 CAD FilesAll Flange Rings and End Plates:http://www.allpowerlabs.org/gasification/gek/downloads.html (2 of 5) [10/9/2008 08:00:27]