<strong>FC01</strong> - Monitoring head CSF-03Flange-mounted calorimetric monitoring headDescriptionFlange-mounted calorimetric monitoring head for <strong>Flow</strong> <strong>Meter</strong> <strong>FC01</strong>.Recommended for food-processing (Tri-Clamp®).1Features● Medium temperature range: -40 °C...+130 °C● Material: stainless steel 1.4571/AISI 316 TiCSF-03Tri-Clamp ®Technical dataType of headflange-mounted monitoring headProcess connection DIN 32676 Tri-Clamp ® DN 1Shank dia.18 mmLength of shank15 mmLength of sensor14 mmSuitable forall media, depending on materialresistanceTemperature range *) -40 °C...+130 °C(of medium)Temperature drift± < 0.05 %/°K/measuring rangeof monitoring head(in the range between +20 °C and +80 °C)Measuring rangewater: 0...3 m/sPressure resistance (1) 40 bar/588 PSIDegree of protection connector (2) IP67Materialstainless steel 1.4571/AISI 316 TiCable to LifYCY 4x2x0.2 mm 2 (AWG 24)electronic control unit(1) Admissible operating pressure DIN 2401, measured at max. temperature(= max. medium temperature)(2) with mating connector*) max. +85 °C in the connector areaOrdering informationTypeCSFflange-mounted monitoring head with calorimetric sensorsMonitoring head design03 monitoring head with flange DIN 32676MediumW waterMaterial of areas exposed to mediumM1 stainless steel 1.4571/AISI 316 TiProzcess connection91 flange DIN 32676-Tri-Clamp® DN1Length of shank/threadL90 15 mm (standard)Electrical connectionE10 round connector with tinned contacts(plug and cable to separate order)CertificationT0 without certificate (standard) *)Specification of mediumxxxCSF - 03 W M1 91 L90 E10 T0 - ... ordering example*) for detailed information please see section 0.Dimensionsø18.70915.59114.551round connectorThis is a metric design and millimeter dimensions take precedence ( mm )inch1 - 60www.e-t-a.comIssue A(010108)
.709<strong>FC01</strong> - Cable types and accessories (CSF-03)DescriptionCable types 15/18 with connectorsCable between <strong>Flow</strong> <strong>Meter</strong> <strong>FC01</strong>-xxx and calorimetric monitoringhead type CSF-03.● Connection to monitoring head by means of 8-pole roundconnector● Connection to <strong>FC01</strong>-xxx by means of 10-pole clampingconnector (XSK1Do + Ka type 15Do + Ka type 18Do + Ka type 15-STDo + Ka type 18-STAccessories8-pole round connector(without cable, for individual wiring by customer)0Z112Z003124ø18501.9710-pole clamping connector for cable types 15 and 18(without cable, for individual wiring by customer)0Z112Z000167Technical dataCable type 15 and 15-STFeatures: highly flexible, paired, fully shielded,electrical and thermal properties at +20 °CConductor resistance:Insulation resistance:Operating voltage:Withstand voltage:< 92 Ω/km> 200 MΩ/kmmax. 100 V ACAC 800 VMax. load:0.5 ATemperature range: -10 °C...+80 °C (processing and operation)-30 °C...+80 °C (transport and storage)Cable type 18 and 18-STFeatures: non-halogenous, highly flexible, cold- and heat resistant,paired, fully shielded, electrical and thermal propertiesat +20 °CConductor resistance: < 80 Ω/kmInsulation resistance: > 200 MΩ/kmOperating voltage: < 300 V ACWithstand voltage: 1500 V / 50 Hz / 1 minMax. load:3 ATemperature range: -60 °C...+200 °COrdering information10-pole clamping connector for cable types 15-ST and 18-ST(without cable, for individual wiring by customer)0Z112Z000205Typ between calorimetric monitoring heads CSF and <strong>FC01</strong>, <strong>FC01</strong>-FHDo + Ka type 15 PVC insulated cable, type LifYCY 4x2x0.2 mm 2 (AWG 24)8-pole round connector + 10-pole clamping connectorDo + Ka type 18 silicone insulated cable, type 4x2x0.2 mm 2 (AWG 24)8-pole round connector + 10-pole clamping connectorAvailable cable lengths...m 2 m, 3 m, 5 m, 8 m, 10 m, 15 m, 20 m, 25 m,30 m, 40 m, 50 m, 60 m, 70 m, 80 m, 90 m,100 m, 110 m, 120 m, 130 m, 140 m, 150 m,160 m, 170 m, 180 m, 190 m, 200 mDo + Ka type 15 - 2 m ordering exampleThis is a metric design and millimeter dimensions take precedence ( mm )inchCaution: Standard warranty cover will be invalidated if the correctE-T-A monitoring head/control unit connecting cable isnot used.Typebetween calorimetric monitoring heads CSF and <strong>FC01</strong>-STDo + Ka type 15-ST PVC insulated cable, type LifYCY 4x2x0.2 mm 2 (AWG 24)8-pole round connector + 10-pole clamping connectorDo + Ka type 18-ST silicone insulated cable, type 4x2x0.2 mm 2 (AWG 24)8-pole round connector + 10-pole clamping connectorAvailable cable lengths...m 2 m, 3 m, 5 m, 8 m, 10 m, 15 m, 20 m, 25 m,30 m, 40 m, 50 m, 60 m, 70 m, 80 m, 90 m,100 m, 110 m, 120 m, 130 m, 140 m, 150 m,160 m, 170 m, 180 m, 190 m, 200 mDo + Ka type 15-ST - 2 mordering exampleIssue A(010108)www.e-t-a.com 1 - 61