HASTELLOY C-22HS ALLOY - Haynes International, Inc.

More documents

Recommendations

Info

$P:\P25065\H-# Literature\H-2082 - Haynes International, Inc.$

HASTELLOY ® C-22HS ®22010 Haynes International, Inc.
HASTELLOY ® C-22HS ® - OIL & GAS APPLICATIONSThe data in this document is believed to be useful for applications in the oil & gas industry, or other industries whichmay require an alloy with excellent corrosion resistance and strength levels higher than “standard” HASTELLOY ® C-22HS ®alloy. Additional information on C-22HS alloy may be found in the alloy brochure H-2122 on the Haynes Internationalwebsite.NOMINAL CHEMICAL WEIGHT %Ni Cr Mo Fe W Mn Al Si C B57 a 21 17 2* 1* 0.8* 0.5* 0.08* 0.01* 0.006*aAs Balance* MaximumAVAILABLE IN THREE VERY HIGH-STRENGTH CONDITIONSEarly testing of C-22HS alloy was focused on material in the annealed + age-hardened condition where the material wasannealed at 1975°F (1079°C) and age-hardened at 1300°F (704°C)/16h/Furnace cool (FC) to 1125°F (607°C)/32h/Air-cool (AC.)In this “standard condition” C-22HS alloy will typically have strengths around 100 ksi (690 MPa). While this strength levelis almost double of “C-type” alloys in the annealed condition, many oil and gas applications require even greater strength.For this reason, a considerable development effort has been generated on C-22HS alloy in three other “very high strength”conditions:.1) Cold Worked2) Cold Worked + Age-Hardened A3) Low Temperature (LT) Annealed B + Age-Hardened CA1125°F (607°C)/10h/AC B1850°F (1010°C) C1300°F (704°C)/16h/FC to 1125°F (607°C)/32h/ACA comparison of yield strengths for the three very high strength conditions is shown below along with that of the annealedand “standard” conditions.2252001400Yield Strength (ksi)175150125100755012001000800600400Yield Strength (MPa)252000Annealed"Standard"Annealed+ Age-HardenedLow-TempAnnealed+ Age-HardenedColdWorkedColdWorked+ Age-Hardened03 HASTELLOY ® C-22HS ® ALLOY
Page 1: CORROSION-RESISTANT ALLOYSHASTELLOY
Page 5 and 6: AVERAGE ROOM TEMPERATURE TENSILE PR
Page 7 and 8: SOUR GAS TESTING - STANDARD NACE TE
Page 9 and 10: TRANSVERSE TENSILE PROPERTIES-COLD-
Page 12: 071610Corporate Headquarters1020 We

HASTELLOY C-22HS ALLOY - Haynes International, Inc.

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?