Datasheet Micropack System (DS - 241120.90X.DS3 - 1 - C)

MicropackPower SystemGREAT SMALL POWERThe Micropack power system isdesigned for smaller loads, yet with aheavy functionality. With few standardbuilding blocks easily mounted on a DINrail, the system is fully on-siteconfigurable.Product DescriptionThe Micropack Power System extends your network onestep further. With load ranges typically between 120W and1000W, the system is perfect for broadband extension andother high speed data and telecom applications. It is suitablefor both indoor and outdoor applications.With a few DIN rail mountable building blocks, the Micropackpower system is design for on-site configuration andassembly. This allows fast and efficient logistics andenhanced flexibility.Broad functionality including ethernet based remotemonitoring is provided by the Compack controller.The Micropack Power System comes in 12, 24 and 48Voptions making it suitable for industrial applications ascontrol cabinets, safety systems and building automationapplicationSystem Building BlocksPower CoresThe power core options are 2 or 4 plug-in positions forMicropack rectifiers and one position for Compack controller,or a simple bulk AC in - DC out stand alone unit with onerectifier plug-in position. The multi rectifier cores also includecommon AC mains connection, internal signaling andredundant DC current output.Battery DistributionThe battery distribution is configurable with plug in stylebreakers. Battery connection terminals and low voltagebattery disconnect (LVBD) are rated for optimal batterybackup. The battery distribution is available for negativedistribution systems.Bulk feed optionAs an option to the battery distribution, the bulk feed optionis available for a non-load distribution power solution or withself made wired standard DIN rail breaker distribution. Thisoption is available for systems with floating, positive ornegative ground.Load DistributionDistribution is on-site configurable with plug in style breakersand can be used in series with more distribution blocks ifneeded. The load distribution has positive ground.Marine Filter UnitThe MicroPack System complies to DnV Rules forClassification of Ships, High Speed & Light Craft and DnVOffshore Standards when the AC mains input is connectedthrough the Marine Filter Unit. The filter can be used forpower cores with up to 4 rectifiers installed.Micropack RectifiersThe rectifiers are convection cooled for system installationin harsh and noise sensitive environments. Wide ranges ofboth input voltage and operating temperature give thesystem superior system availability. High current ability forselective fuse tripping and support for DC input extends theapplication range. Refer to rectifier modules datasheets forfurther information.www.eltekvalere.comSee last page for specifications

Available power cores: 1, 2 and 4 rectifier positionsA few quick steps……Start with a DIN rail Clip on and lock the desired power core; 2or 4 rectifier positions or stand aloneClip on and fasten either the bulk feed unitor battery distribution (for 2 or 4 pospower cores)Clip on and fasten the load distribution (ifapplicable)Do the wiringIn marine applications, clip on the MarineFilter Unit and connect the AC feedthrough it.Plug in the battery and load breakersPlug in the rectifier modules and controllerBulk feed output with CANOptional load distributionLoad andbatterybreakerInstall covers for the distributions, bulkfeed and blind panel for any unusedrectifier positions if applicable…and you’ll have a complete DC system.Compackcontroller slotBattery distribution with LVBD and CANLoad distributionMarineFilter Unitwww.eltekvalere.com 2(4) 241120.90X.DS3 – vC

Micropack Power System – Configurable order optionsBasic systemsOptional blocksStand alone power core Controller-less dc systemsOutput voltage set by pot meter in frontOptional filter for Marine applications2 and 4 rectifier positions power core Compack controllerBulk feed orBattery and load distributionOptional extra load distribution and filter forMarine applicationsOptional breakers and rectifier slot blindpanelsConfigured and ordered by CTOCompack controller – remote monitoring and controlThe Compack controller provides several functions for controllingthe power system, and it provides an interface to the outsideworld through its LAN connection: Local and remote configuration through WebPower, SNMPand PowersuiteEasy integration with NMS software using the SNMPprotocol with TRAP, SET and GET on Ethernet. Email of TRAPalarmsAutomatic battery test, lifetime indication and capacityEnergy, Event, Data, Battery temperature and temp logsUser defined alarm groups using Boolean logic on events3 programmable relay outputs for alarm and control3 programmable multipurpose inputs (temp/dig/analog)SpecificationsInput VoltageTemperature RangePower ConsumptionMTBFDimensions (HxWxD)WeightEthernet portRelay Outputs(1.5 mm 2 )Contactor OutputsConfigurable Inputs(1.5 mm 2 )* HW version 1.0 - 1.2Tolerances: 9-75 VDC (17-75VDC*)Nominal: -20 to +60˚C (-4 to 140˚F)Reduced accuracy: -40 to +70˚C3W> 550, 000 hours Telcordia SR-332Issue I, method III (a) (Tambient : 25°C)75 x 30 x 115mm / 2.95 x 1.2 x 4.52”240g / 0.53 lbs10/100 BASE-THP Auto MDI/MDI-XForm-C (dry contact NO-C-NC)60V / 1A breaking capacity2 x LVD control outputs“Digital”: open/closedAnalog: 0-75VTemperature: External NTCwww.eltekvalere.com 3(4) 241120.90X.DS3 – vC

Micropack Power SystemAdditional Technical SpecificationsBulk Feed (40A)Max. CurrentOutput ConnectorSignals for externaldistributionDC Output EarthDimension (W)Weightwww.eltekvalere.com40AScrew terminals, max 10.0 mm 2 [6AWG]oooLoad fuse senseBattery fuse sense2x LVDConfigurable, default: floating166 mm [6.3”] w/2-pos Power Core254 mm [10.0”] w/4-pos Power Core110 g [0.24 lbs]Battery Distribution (2 x MCB + LVBD)Breakers o Plug-in style (IPA series fromAirpax)o Up to 30AMax no of breakersBattery ConnectorLVBDDimension (W)Weight2 per blockScrew terminals, max 10.0 mm 2 [6AWG]50ALoad Distribution (4 x MCB)82 mm [3.2”]270 g [0.6 lbs] (excl. MCBs)Breakers o Plug-in style (IPA series fromAirpax)o 2A to 15AMax no of breakers4 per blockLoad Connector Screw terminals, max 4.0 mm 2 [10AWG]LVLDDimension (W)WeightMarine Filter UnitAC connectorNo72 mm [2.8”]165 g [0.4 lbs] (excl. MCBs)Screw terminals, 2.5 mm 2 [12 AWG]Dimensions35 x 99 x 114.5 mm [1.4 x 4.1 x 4.7”](WxHxD)Weight328 g [0.72 lbs]Common SpecificationsDimensions (H x D)MountingRemote MonitoringLocal MonitoringCover materialOperating tempStorage temp89 mm (2U) x max. 150mm (incl. DINrail) mm [3.5 x 5.9 ”]35mm DIN railEthernet 10/100 BASE-T (refer toCompack datasheet for details)3 x LEDs (major alarm, minor alarm,power on)3 x Form C dry contactsPlastic V0 rated and aluminum-40 to +65°C (-40 to +149°F)-40 to +85°C (-40 to +185°F)Rectifier/Controller Part NumbersPart no. Description241120.100 Micropack 48/250 CC241120.200 Micropack 24/240 WOR241120.100 Micropack 12/120 WOR242100.400 CompackPower Core (Stand alone / 2-pos / 4-pos)AC Input o 1x Single Phaseo 85VAC – 300VAC (185 –275VDC, no powerderating)AC ConnectorMax Output PowerStandalone2-pos4-posDimension (W)WeightCodingApplicable StandardsElectrical safety IEC 60950-1/UL 60950-1/CSA 22.2EMCMains Harmonics EN 61000-3-2ETSI EN 300 386 V.1.3.2EN 61000-6-1 (immunity, lightindustry)EN 61000-6-2 (immunity, industry)EN 61000-6-3 (emission, light industry)EN 61000-6-4 (emission, industry)EN 61000-6-5 (immunity, powerstation and substation)Environment ETSI EN 300 019-2-1 Class 1.2ETSI EN 300 019-2-2 Class 2.3ETSI EN 300 019-2-3 Class 3.2ETSI EN 300 132-22002/95/EC (RoHS)2002/96/EC (WEEE)Marine compliant(w/ additional filtermodule)o Screw terminals, 2.5 mm 2 [12AWG]o Top entry48VDC250W500W1000WStnd.aln.44mm[1.8”]70 g[0.2 lbs]24VDC240W480W960W2 pos.166 mm[6.8“]160g[0.4 lbs]DnV Rules for Classification of Ships,High Speed & Light Craft and DnVOffshore StandardsPart NumbersPart no. DescriptionCTOU0402.xxxx CTO configuration for 4 rectifier Power CoreCTOU0202.xxxx CTO configuration for 2 rectifier Power Core241120.900 Micropack Power Core standalone241120.901 Micropack Power Core 2 position241120.902 Micropack Power Core 4 position241120.910 Battery Distribution (2 x MCB + LVBD)241120.911 Bulk Feed (40A)241120.920 Load Distribution (4 x MCB)241120.930 Marine Filter UnitSpecifications are subject to change without notice12VDC120W240W480W4 pos254mm[10.4”]250 g[0.6 lbs]YES, to prevent use of incompatiblerectifier models241120-90X.DS3– vCEltek ValereGråterudv. 8, PB 2340 Strømsø, 3003 Drammen, NorwayPhone: +47 32 20 32 00 Fax: +47 32 20 32 10