Marine Application Brochure - Hawkeye Industries

HawkeyeIndustries Inc.Marine Construction & Repair System

Duratec Marine Construction & Repair SystemAqua Buff: for Cleaning & Buffing GelcoatGELCOAT REPAIRDuratec Vinyl Ester PrimerOutstanding osmosis resistance: prevents blistering – withstands 1000 hours of boilingwater at 20 mils. Sprays like paint, easy to sand. Save time, reduce labor when fairingor preparing for topcoats.Grey 1799-006 • White 1794-006Duratec Hi-Gloss Additives 904-001Blend with gelcoat to assure a hard cure. The blend sprays easily, without orange peel.Start with fine (600) grit sandpaper to save time and prevent burn-through. Sand &buff to a perfectly blended repair. No wax, no styrene, no PVA required. Buff to aconsistent high gloss.Buff and sand to a perfectly blended repair. Provides abetter repair, faster.Aqua BuffBuff out sanding scratches with AB 1000F or AB1000W. Polish to a clean bright shinewith AB 2000. No solvents, no oils or polymers to mask the true surface. Environmentallyfriendly. Great low cost solution.Aqua Buff 1000F • Aqua Buff 1000W • Aqua Buff 2000Marine ConstructionDuratec products save money in reduced labor due to faster sanding. Vinyl ester resinsprovide the ultimate water barrier.Duratec will stick to most prepared epoxy surfaces. Great for one-off hulls, or toeliminate uneven surfaces on polyester, vinyl ester, or epoxy laminate. For patterncoatings and mold repair, please see our website.Duratec Vinyl Ester Fairing PuttyApply by trowel to fill low spots, or damaged areas. Cures hard and fast. Easy to sand.Duratec Vinyl Ester Fairing Putty 1810-013Duratec Vinyl Ester PrimerTremendous, versatile primer. Great for repair or to cover Fairing Primer and Fairing Putty.Thousands of hulls protected with the Duratec Vinyl Ester Primer.White 1794-006 • Grey 1799-006Duratec Vinyl Ester Fairing PrimerFor fast fairing. Easy to long board. Apply by spray, pile on up to 1/8’’ per application.Low density. Pastel blue makes it easy to see where the fairing primer is sanded.Duratec Primers can be top-coated with epoxyprimers. The Vinyl Ester Primer can be directlytop coated with urethanes.Distributor listing atwww.duratec1.comDuratec Quick-Leveling TopcoatOff-the-gun glossy coating. Resistant to oil, water, brake fluid. Provides a smooth,shiny finish for the B side of laminate. Great for bilge spaces, exhaust ducting or enginerooms. Low VOC, Low HAPS.Aqua BuffAqua Buff 1000 is ideal for buffing out sanding scratches. Aqua Buff 2000 polishesgelcoat to a perfect shine. Both product idea for cleaning and restoring gelcoat to alike-new shine.Hawkeye Industries, Inc.Contact us: 909.546.1160email: hawkeyesales@hawkeyeind.com