Download Complete Catalog - Rutherford Equipment, Inc.

Online OrderingNow Availablewww.rutherfordequipment.comEQUIPMENT CATALOG 1200

Your Partner In Growth Since 1960!CONYERS, GEORGIA1981 Gees Mill RoadConyers, GA 30013770-929-1601 • 800-241-5652FAX: 770-929-1730GOLDSBORO, NORTH CAROLINA303 W. Veterans DriveGoldsboro, NC 27530919-739-5883 • 800-426-9293FAX: 919-739-5894Inside Sales Staff:(L to R) CeCe Thornton,Kenny Kelly, Leigh HowellInside Sales Staff:(L-R) Ray Coile, Nicole Godbee, HarryTaylor, Stephen Buckley, Scott CosperAPOPKA, FLORIDA2577 Clark StreetApopka, FL 32703407-291-1005 • 800-432-1869FAX: 407-291-7237Inside Sales Staff:(L-R) Marty Garcia, Mike Steward,Ricci Terrell, Dawn Redmonsales@rutherfordequipment.com • www.rutherfordequipment.com

OUR COMPANYSINCE 1960, Rutherford Equipment has been supplying high quality partsOUR COMPANYand equipment to the propane industry in the southeast. We are a family ownedbusiness, SINCE staffed 1960, by highly Rutherford motivated Equipment individuals has been who supplying are dedicated high to quality providing partsthe and propane equipment industry to the with propane a complete industry selection in the southeast. of high quality We are equipment a family at ownedcompetitive business, staffed prices by in highly a prompt motivated and efficient individuals manner. who are dedicated to providingthe propane WE ARE industry COMMITTED with a complete to earning selection our customers’ of high quality confidence equipment by delivering atcompetitive courteous and prices competent in a prompt service, and supplying efficient manner. product updates and information, andproviding WE training ARE COMMITTED and technical to support. earning We our are customers’ sensitive confidence to our customers’ by deliveringneeds courteous and and dedicated competent to their service, satisfaction! supplying product updates and information, andproviding training and technical support. We are sensitive to our customers’OUR EQUIPMENT CATALOGneeds and dedicated to their satisfaction!We have done our best to offer you a compact catalog that includes all ofthe OUR propane EQUIPMENT parts and equipment CATALOG we stock. Consumer products, i.e. grills, gaslogs, etc. We are have not done included our best in this to offer catalog. you Call a compact us for a catalog consumer that product includes catalog. all ofthe In some propane cases parts we include and equipment our part number we stock. and Consumer only a brief products, description i.e. grills, of the gas item.For logs, technical etc. are not information, included in warnings, this catalog. installation Call us for instructions, a consumer etc., product please catalog. referto In some the instructions cases we include that come our part with number the item and (if only applicable). a brief description If you need of the item.additional For technical information, please warnings, contact installation us. We can instructions, provide manufacturer’setc., please refercatalogs to the instructions upon request. that come You can with also the access item (if the applicable). manufacturer’s If you website need foradditional information. please contact us. We can provide manufacturer’scatalogs upon request. You can also access the manufacturer’s website forOUR WEB SITEadditional information.On-line ordering and account status are now available via our web site atwww.rutherfordequipment.com. OUR WEB SITEYou can now check pricing and our current stock.Links to On-line our manufacturers’ ordering and account web sites status are available. are now available Check frequently via our web for new site atwww.rutherfordequipment.com. products and specials!You can now check pricing and our current stock.Links We appreciate to our manufacturers’ your business! web sites are available. Check frequently for newproducts and specials!RandyWe appreciateRutherfordyour business!PresidentRandy RutherfordPresident

Our headquartersRutherford Equipment, Inc.is based in Conyers, GA: 1981 Gees Mill Road, NE, Conyers, GA 30013(P) 800-241-5652 • (F) 800-441-6589Our Florida Location:Rutherford Equipment, Inc.2577 Clark St., Apopka, FL 32703(P) 800-432-1869 • (F) 407-291-7237Mike Steward, Florida Operations Managermike.steward@rutherfordequipment.comWeb: www.rutherfordequipment.come-mail: sales@rutherfordequipment.comRandy Rutherford, PresidentMike Rutherford, VP, Sales & Marketing Ray Coile, Operations Managerrandy.rutherford@rutherfordequipment.com mike.rutherford@rutherfordequipment.com ray.coile@rutherfordequipment.comInside Sales:Scott Cosperscott@rutherfordequipment.comStephen Buckleystephen.buckley@rutherfordequipment.comConsumer Products:Nicole Godbeenicole.godbee@rutherfordequipment.comHarry Taylorharry.taylor@rutherfordequipment.comInside Sales:Ricci Terrellricci.terrell@rutherfordequipment.comDawn Redmondawn.redmon@rutherfordequipment.comWarehouse:Marty Garciamarty.garcia@rutherfordequipment.comOutside Sales:Johnny Patrick - GAjohnny.patrick@rutherfordequipment.comcell # 404-312-6035voicemail # 800-435-2343 ext. 83Stephen Nichols - GA(Consumer Products)stephen.nichols@rutherfordequipment.comcell # 706-201-7180voicemail # 800-435-2343 ext. 88Phil Savage - AL, MS, FL Panhandle, TNphil.savage@rutherfordequipment.comcell # 334-467-6171voicemail # 800-435-2343 ext. 82Outside Sales:Dave Nott - FLdave.nott@rutherfordequipment.comcell # 407-383-6154voicemail # 800-435-2343 ext. 81Other Personnel:Cindy Rutherford - Human Resourcescindy.rutherford@rutherfordequipment.comKatie Lewis - Clericalkmc@rutherfordequipment.comDebbie Capell - Accounts Receivabledebbie.capell@rutherfordequipment.comLinda Lanier - Inventory Controllinda.lanier@rutherfordequipment.comWarehouse:Ricky Thomas - Warehouse Managerricky.thomas@rutherfordequipment.comJustin DormineyRobbie SmithOutside Sales:Tate Greely - FL(Consumer Products)tate.greely@rutherfordequipment.comcell # 813-442-4572Our North Carolina Location:Kenny Kelly, NC Operations Managerkk@rutherfordequipment.comInside Sales:Leigh Howellleigh.howell@rutherfordequipment.comCece Thorntoncece.thornton@rutherfordequipment.comWarehouse:Dwayne FieldsRutherford Equipment, Inc.303 W. Veterans Drive, Goldsboro, NC 27530(P) 800-426-9293 • (F) 919-739-5894Outside Sales:Woody Tew - E. NC, E. SCwoody.tew@rutherfordequipment.comcell # 910-990-7789voicemail # 800-435-2343 ext. 87Brandon Cox - W. SC, W. NC, VA, E. TNbrandon.cox@rutherfordequipment.comcell # 336-963-3939voicemail # 800-435-2343 ext. 84

TABLE OF CONTENTSPlease see pages 124-126 for a detailed product indexFisher Products ~ pages 2-47Regulators 2-22Internal & ESV Valves 23-38Relief / Globe / Back Check Valves, Etc 39-46Rotary Gauge, Adapters & Miscellaneous Accessories 47Marshall Excelsior Products ~ pages 48-118Turbo-Flo, Globe/Angle , Bypass & Hose End Valves 48-54Truck Equipment, Quick Acting Valves, Excess Flow/Back Check Valves 55-60Float Gauges, Liquid Transfer Valves, Actuators, ESV's, Swing Check Valves, Multiport & Relief Valves 61-72Regulators, Vent Valves, Strainers, Couplings/Adapters 75-85Chock Blocks, Thermometers, Gaskets, Switch Covers, Needle Valves, Outlet Box & Service Valves/Adapters 86-96RegulatorsQCC Adapters,1-20Toggle Valves, POL Adapters, Locks, Camping & High Pressure Adapters 97-109InternalPigtails,&Hoses,ESV ValvesTest Kits,21-39Vent Kits & LED Light 110-118Relief / Globe / Back Check Valves, Etc 40-46Rotary Gauge, Adapters & Miscellaneous Accessories 47Fisher Products ~ pages 1-47Miscellaneous Regulators, Mounting Brackets, Adapters & Regulator Cover ~ page 119MarshallOPD / TankExcelsiorValves,ProductsRelief Valves~ pages& Ball48-118Valves ~ pages 120-124Appliance connectors, Gaskets & O-rings ~ page 125Turbo-Flo, Globe/Angle , Bypass & Hose End Valves 48-54Truck Equipment, Quick Acting Valves, Excess Flow/Back Check Valves 55-60Liquid Transfer Valves, Actuators, ESV's, Swing Check Valves, Multiport & Relief Valves 61-72Regulators, Vent Valves, Strainers, Couplings/Adapters 75-85Chock Blocks, Thermometers, Gaskets, Switch Covers, Needle ValvesOutler Box & Service Valves / Adapters 86-96QCC Adapters, Quick Acting Valves, POL Adapters, Locks, Camping & High Pressure Adapters 97-109Pigtails, Hoses, Test Kits, Vent Kits & LED Light 110-118Brass Fittings & Pipe Fittings~ pages 126-133Hoses ~ pages 133-135Perfection, Poly Pipe & TracPipe ~ pages 136-149Gauges & Pressure Test Equipment ~ pages 150-154Remote Gauges, Gas/CO Detectors, Thermocouples, Service Equipment ~ pages 154-159Miscellaneous Regulators, Mounting Brackets, Adapters & Regulator Cover ~ page 119Decals, Cylinders, Tanks & Tank Accessories ~ pages 160-167OPDDispensing/ Tank Valves,ReliefEquipment, Pumps,ValvesPump& BallPartsValvesSheets,~ pagesMotors120-124& Electrical 168-193Ball Electrical Valves, / Appliance Motors, Starters connectors, & Switches Gaskets ~ pages & O-rings 194-197 ~ pages 124-125Brass Meters, Fittings Hose & Reels Pipe & Fittings~ Reel Parts pages ~ pages 126-133 198-203Hoses Miscellaneous ~ pages 133-135 Service Equipment & Truck Components ~ pages 204-206Perfection, Vaporizers Poly & Heaters Pipe & ~ TracPipe pages 207-210 ~ pages 136-149Gauges Carburetion & Pressure Equipment Test Equipment ~ pages 211-219 ~ pages 150-154Service Common Equipment Repair Kits ~ pages ~ pages 155-159 220-223Decals, Appendix Cylinders, ~ pages Tanks 220-230 & Tank Accessories ~ pages 160-167Dispensing Equipment, Pumps, Pump Parts Sheets, Motors & Electrical 168-197Electrical ~ pages 168-197Meters, Hose Reels & Reel Parts ~ pages 198-203Miscellaneous Service Equipment & Truck Components ~ pages 204-206Vaporizers & Heaters ~ pages 207-210Carburetion Equipment ~ pages 211-219Common Repair Kits ~ pages 220-223Appendix ~ pages 224-231

Training MenuWe are available to conduct training on any of the products wedistribute. The list of topics below are some of the popularclasses we offer. Call today to schedule a training session.Regulators; An overview of the components, features of the regulator. Pressure limitaons, relief valvesoperaon, lockup, problems and troubleshoong systems. Discuss proper installaon of the regulatorand its relaonship with tank size and the piping system. 6 hours classroom.Pipe Sizing; How to size typical piping systems and the use of the slide charts from the manufacturersand the different pipe sizing charts that are found in NFPA Pamphlet 54. Discuss how this relates toregulators as a system. 2 hours classroom.Leak and Pressure Tesng; An overview of the tesng of piping systems as it relates to the requirementsof NFPA Pamphlet 54, checking lockup, ow and the required tesng for leaks in the piping system. 4hours classroom.Pumps and Pump Systems; an overview of the pumping system. Included are the components and thefeatures of the pump and liquid meters. Pressure limitaons, relief valves operaon, problems andthe proper way to troubleshoot systems. Proper installaon and maintenance of the pump and itspiping system. 7 hours classroom.CETP; The CETP training and the proctoring of tests can be done with either paper versions or the electronicversions. For electronic versions, a computer and internet service would be required for eachcandidate. Classroom hours vary by course.Counterstrike—CSST; An overview of Counterstrike CSST piping systems, pressure limitaons and bonding.2 hours classroom.Perfecon and PE Piping Systems and Components; an overview of the history of PE piping, from fusionto the Perfecon mechanical ng. Included are pressure limitaons and proper installaon. 2 hoursclassroom.CSR Basics; A “Cliff note” version of CETP Basic Principles and Pracces designed to give the CSR a basicunderstanding of propane and its characteriscs, pressure and leak tesng and what the servicemanencounters in the eld. 4 hours classroom.Gas Log and Gas Heater Basics; an overview of Gas logs and gas heaters. Included is some informaon onvalves and controls. Installaons do’s and don’ts are also covered. 3 hours classroom.Alternave Fuels; (Mike Steward) An overview of the past to the present as to where we came from andwhat’s going on today in the alternave fuels market. This includes informaon on over the road vehiclesas well as off road equipment such as mowers, oor buffers and li truck equipment. 4 hoursclassroom.Georgia • 800-241-5652Florida • 800-432-1869North Carolina • 800-426-9293

RegO ® ~Fisher Cross ReferenceThe following guide is for your convenience and is general in nature. Part numbers listed are the mostcommonly requested. Please contact your local Rutherford Equipment office for specific detailsregarding the products we offer.Rego Fisher DescriptionRego Fisher3176 G101 Back Prs Chk Vlv, 1¼"A3213R series C477-24 series6016 N550-16 2" ESVA3217AR series C484 series7177 N201 Automatic control valveA3217DAR series C483 series7574 F131 Excess Flow Vlv, 1½"A3219FA series C404 series(A)7605B N550-16 2" ESVA3219RT P3411212KIT 50P-2 manometer kitA3292B F1321519A2 F130 Excess Flow Vlv, 1"A3400L6 G1041519A3 F131 Excess Flow Vlv, 1½"A7500 series N300 series1519A4 F132 Excess Flow Vlv, 2"A7505AP N301-061519C2 F134 1 1/2" MNPT x 1" FNPT excess flow valvesA7506AP N401-061519C4 F133 2" FNPT X 2"FNPT excess flow valveA7507AP N301-081584 series 64 series 1/2" x 1/2" adjustable high pressure regulators A7508AP N401-082302-31 P100A regulator bracketA7509BP N310-10302V 912-101 1/4" x 3/8" compact appliance regulatorA7510BP N410-103127G H110-250 1/2" external relief valves for ASME & DOTA7511AP N310-123127U H124 1/4" hydrostatic relief valves, 450 psigA7512BP N410-123131G H185-250 3/4" external relief valves for ASME & DOTA7513AP N310-163179A/B M570 1 3/4ACME filler hose adapterA7514BP N410-163200C P163A remote cable kitA7517AP N310-243272E F100 Excess Flow Vlv, 3/4"A7794 G201-163272F F101 Excess Flow Vlv, 3/4"A7797A N4803272G F101 3/4"MNPT x 3/4"FNPT excess flow valveA8020D J4153272G F101 Excess Flow Vlv, 3/4"A8434 series H722 series3282A F102 Excess Flow Vlv, 1¼"A8436 series H732 series3282B F102 Excess Flow Vlv, 1¼"LV3403B4 R222-BAF3282C F105 1 1/4"MNPT x 1 1/4"FNPT excess flow valve LV3403TR R122H-AAJ3292A F106 Excess Flow Vlv, 2"LV404B4 R232A-BBF3292B F191 2" MNPT x 2" FNPT excess flow valveLV404B46 R632A-CFF597F series 67CH series 1/4" x 1/4" adjustable high pressure regulators LV404B9 R632A-HBF6016-60C P327D ESV pneumatic actuatorLV404B96 R632A-JFF1/4" Inv Flare x 1/2"FNPT automaticLV404Y9 R232E-HBH7525B34 R962-31changeover regulatorLV4403B4 R622-BCF7534G H282-250 2" internal relief valves for stationary tanks LV4403B66 R622-DFFA1519A2 F134 1" FNPT X 1" FNPT excess flow valveLV4403B66R R652-DFFA1519A3 F135 1 1/2"FNPT x 1 1/2" FNPT excess flow valve LV4403B66RA R622-DFFA1519B4 F133 2" FNPT x 2" FNPT excess flow valveLV4403SR4 R622H-BGKA3146 G100 3/4" back check valveLV4403SR9 R622H-HGKA3186 G112 2" steel back check valveLV4403SR96 R622H-JGKA3186 G112 Back Prs Chk Vlv, 2 StlLV4403TR4 R622H-BGJA3187 G105 2" soft seat back check valveLV4403TR9 R622H-HGJA3187S G105 Back Prs Chk Vlv, 2" Soft SeatLV4403TR96 R622H-JGJA3196 G104 3" back check valveLV4403Y4 R622E-BCHA3196 G104 Back Prs Chk Vlv, 3"LV5503B6 HSRL-BFCA3209D050 C407-10-05 1 1/4" internal valveLV5503G4 R622-CFGXAA3209D50 C407-10-50 1 1/4", 50 GPM internal valveLV5503Y6 R622E-DCHA3209D80 C407-10-80 1 1/4", 80 GPM internal valveLV6503B14 CS400IR-8EC7A3209PA P389 pnematic actuator for 1 1/4" internal valve LV6503B16 CS400IR-8EC8A3212R250 C477-16252" 250 GPM internal valveDescription3" internal valvesingle flanged 3" internal valvesdouble flanged 3" internal valvessingle flanged 4" internal valveremote thermal releaseExcess Flow Vlv, 2"Back Prs Chk Vlv, 3"globe & angle valves3/4" globe valve3/4" angle valve1" globe valve1" angle valve1 1/4" globe valve1 1/4" angle valve1 1/2" globe valve1 1/2" angle valve2" globe valve2" angle valve3" globe valve2" sight flow indicator1" FPT X 1 3/4" FACME hose end valveangle valve2" internal relief valves for delivery trucks3" internal relief valves for delivery trucks1/2" x 1/2" 2 nd stage compact regulator1/4" x 1/2", compact 1 st stage regulator1/4" x 1/2" compact integral 2 stage regulator1/4" x 3/4" integral 2 stage regulatorFPOL x 1/2" compact integral 2 stage regulatorFPOL x 3/4" integral 2 stage regulatorFPOL x 1/2"FPT 2 psi compact integral regulator1/2" x 1/2" 2 nd stage regulator1/2" x 3/4" 2 nd stage regulator1/2" x 3/4" 2 nd stage back mount regulator3/4" x 3/4" 2 nd stage angle mount regulator1/2" x 1/2", 5 psig 1 st stage regulatorFPOL x 1/2", 5 psig 1 st stage regulatorFPOL x 3/4", 5 psig 1 st stage regulator1/2" x 1/2", 10 psig 1 st stage regulatorFPOL x 1/2", 10 psig 1 st stage regulatorFPOL x 3/4", 10 psig 1 st stage regulator1/2" x 1/2" 2 psig regulator3/4" x 3/4" 2 nd stage regulator1/2" x 3/4" tobacco barn regulator3/4" x 3/4" 2 psig regulator1 1/2" large capacity 2 nd stage regulator2" large capacity 2 nd stage regulatorCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 1 -

First-Stage RegulatorsFIRST-STAGE REGULATORSTYPE R122HTYPE R622HTypes R122H and R622H First-Stage Regulators are UnderwritersLaboratories (UL) listed regulators designed for Two-Stage LP-GasRegulator systems. These First-Stage regulators reduce tankpressure to a lower pressure (usually 10 psig / 0,69 bar) for aSecond-Stage regulator. Fisher ® brand First-Stage regulators arepainted red for easy identifi cation. Vents are screened with standardorientation over the outlet.Type R122H – Designed for use as a First-Stage regulator fordomestic applications, the Type R122H’s size makes it perfect for tightinstallations. Stainless steel internal parts and corrosion resistantcoatings provide a recommended replacement life of 20 years. Itsnon-adjustable setpoint makes the unit virtually tamper proof. Inletand outlet gauge taps allow easy system testing. Large inlet andoutlet wrench flats provide for easy installation, even in undergroundtanks. The outlet pressure setpoint remains at a nominal factorysetting of 10 psig / 0,69 bar. The designs superior relief performanceexceeds UL requirements and provides double failure overpressureprotection when used with R600 Series Second-Stage regulator.The unit’s Fluorocarbon (FKM) valve disc provides better lockupperformance and durability in contaminated gas. The vent is with3/8-inch NPT for easy installation of vent piping. A large fabricreinforceddiaphragm provides accurate regulation. The large orificeassists in minimizing freeze problems.Type R622H – Time proven design constructed of corrosionresistantand wear-resistant materials, the Type R622H is designedto provide a recommended replacement life of 20 years. Built-in1/8-inch FNPT gauge taps on both the inlet and outlet pressuresides allow for easy system checks. A large 3/4-inch FNPT drip-lipvent reduces the chance of blockage by freezing rain or sleet whenproperly installed with the vent pointing down. Each Type R622His equipped for overpressure protection with a corrosion-resistantinternal relief valve that provides high capacity relief and a travelstop on the closing cap. Its size and confi guration make it ideal forunder-the-dome installations.First-Stage RegulatorsTYPE NUMBERCAPACITIES INBTU per hour / SCMHPROPANE (1)(3)INLET CONNECTION,INCHESOUTLET CONNECTION,INCHESOUTLETADJUSTMENT RANGE,psig / barOUTLETPRESSURE SETTING,psig / barR122H-AAJ1 100 000 / 12,4 1/4 FNPTR122H-AAJXB (2)1/2 FNPTR622H-BGK1/2 FNPT2 000 000 / 22,5R622H-HGKFPOLR622H-JGK 2 250 000 / 25,3 3/4 FNPTNon-Adjustable4 to 6/ 0,28 to 0,4110/ 0,695/ 0,34R622H-BGJ 2 100 000 / 23,6 1/2 FNPT 1/2 FNPTR622H-DGJ 2 400 000 / 27,0 3/4 FNPT 3/4 FNPTR622H-HGJ 2 100 000 / 23,61/2 FNPTFPOLR622H-JGJ 2 250 000 / 25,3 3/4 FNPT8 to 12/ 0,55 to 0,8310/ 0,691. Based on 30 psig / 2,1 bar inlet pressure and 20% droop.2. Vent over gauge taps.3. Metric conversion is based on 2516 BTU/ft 3 of gas at 60°F / 16°C.- 2 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

SECOND-STAGE REGULATORSSecond-Stage RegulatorsTYPE R222TYPE R642TYPE HSRLTYPE R622TYPE R652Types R222, R622, R642, R652, and HSRL Second-Stageregulators are Underwriters Laboratories (UL) listed regulatorsdesigned to reduce the outlet pressure from a First-Stage regulator,usually 10 psig / 0,69 bar to 11-inches w.c. / 27 mbar, in domesticinstallations. Vents are screened with standard orientation over theinlet, but other orientations are available. Fisher ® brandSecond-Stage regulators are painted palm green for easyidentifi cation. Types R222, R622, R642, and R652 are equippedwith a stainless steel inlet screen to reduce the amount of debrisentering the regulator.Type R222 is designed for small domestic applications up to650 000 BTU per hour / 7,3 SCMH. The unit provides the samefeatures as the Type R622 in a smaller package and its designprovides a recommended replacement life of 20 years.Type R622 is designed for Two-Stage domestic applications upto 1 400 000 BTU per hour / 15,8 SCMH. The Type R622’stime proven design and corrosion resistant materials, provide arecommended replacement life of 20 years.Type R622 contains a high performance relief valve and a large3/4-inch screened vent to limit downstream pressure to less than2 psig / 0,14 bar in an overpressure situation as required byNFPA 58. The relief valve design exceeds the industry standard bylimiting the downstream pressure to 2 psig / 0,14 bar even in a doublefailure situation when used with a Type R622H or R122H First-Stageregulator. The Type R622 is adjustable from 9 to 20-inches w.c./ 22 to 50 mbar.For easy system checks, the Type R622 has 1/8-inch NPT built-ingauge taps, orifi ced to a No. 54 drill size, on both the upstream anddownstream sides. This regulator also features a large 3/4-inchdrip-lip vent design.Types R642 and R652 are designed for domestic applicationsup to 920 000 / 10,4 and 1 000 000 BTU per hour / 11,3 SCMH,respectively. These units provide all the same features as theType R622, including the 20 year recommended replacement life anddouble failure protection, in an angle body for the Type R642 andbackmounted design for the Type R652.Type HSRL is an Underwriters Laboratories / UL listed regulatordesigned for light commercial applications up to2 600 000 BTU per hour / 29,3 SCMH. It utilizes a high strengthcast iron body and a 3/4-inch NPT drip lip vent design. The designalso includes a high capacity internal relief valve and a 20 yearrecommended replacement life.Second-Stage RegulatorsTYPE NUMBERCAPACITIES INBTU per hour / SCMHPROPANE (1)INLET CONNECTION,INCHESOUTLETCONNECTION,INCHESOUTLETPRESSURE RANGE,INCHES W.C. / mbarOUTLETPRESSURE SETTING,INCHES W.C. / mbarR222-BAF 650 000 / 7,3R622-BCF 875 000 / 9,81/2 FNPT1/2 FNPT9.5 to 13 / 24 to 32R622-CFF1 400 000 / 15,8R622-DFFR642-DFF 920 000 / 10,43/4 FNPT3/4 FNPT9 to 13 / 22 to 3211 / 27R652-CFFR652-DFF1 000 000 / 11,31/2 FNPT3/4 FNPTR622-CFGXA 1 125 000 / 12,7 1/2 FNPT 3/4 FNPT 13 to 20 / 32 to 50 18 / 45HSRL-BFC 2 300 000 / 25,9 3/4 FNPT 3/4 FNPTHSRL-CFC 2 600 000 / 29,3 1 FNPT 1 FNPT9 to 13 / 22 to 32 11 / 271. Based on 10 psig / 0,69 bar inlet pressure and 2-inches w.c. / 5 mbar droop.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 3 -

2-psi Regulators2-PSI REGULATORSTYPE R652ETYPE R622ETypes R622E and R652E, 2-PSI Service Regulators, aredesigned for Two-PSI LP-Gas Regulator Systems and listedby Underwriters Laboratories (UL). These units are installeddownstream from a First-Stage regulator and reduce an inletpressure of 10 psig / 0,69 bar to a nominal 2 psig / 0,14 bar outletpressure. 2-PSI Service Regulators are designed for domesticapplications that supply 2 psig / 0,14 bar LP-Gas to a line regulatorlocated inside the building. In most cases a manifold is used withcorrugated stainless steel tubing (CSST) as well as other acceptablepiping materials for routing to the line pressure regulator supplyingapproximately 11-inches w.c. / 27 mbar to appliance regulators.Types R622E and R652E 2-PSI Service Regulators feature acombination relief valve and large vent that provide overpressureprotection and exceed UL requirements. Both units have a stainlesssteel inlet screen to reduce the amount of debris from entering them.Fisher ® brand Types R622E and R652E are painted green with awhite closing cap for easy identifi cation.Type R622E – Time proven design constructed of corrosionresistant materials, the Type R622E is designed to provide arecommended replacement life of 20 years. Fisher brand’s fabricreinforceddiaphragm and large diaphragm area provide accurateregulation at increased capacities. All components provide superiorresistance to fi eld conditions that may cause wear and corrosion.Built-in 1/8-inch taps (orifi ced to a number 54-drill size) on theupstream and downstream sides allow for easy gas system checks.Type R652E – Provides the same features as the Type R622E,includes a 20 year recommended replacement life with a backmount design.Typical 2-PSI InstallationTYPE R122H OR R622H10 PSIG / 0,69 barTYPE R622E OR R652E2 PSIG / 0,14 barTYPE NUMBER2-PSI Service RegulatorsCAPACITIES IN BTU per hour/ SCMH PROPANE (1) CONNECTIONSINLET X OUTLET, INCHESR622E-BCH 1 460 000 / 16,4 1/2 x 1/2 FNPTR622E-DCH 1 680 000 / 18,9R652E-DFH 1 500 000 / 16,91. Based on 10 psig / 0,69 bar inlet pressure and 20% droop.*See page 5 for intregral 2PSI Regulators3/4 x 3/4 FNPTOUTLETPRESSURE RANGE,PSIG / barOUTLETPRESSURE SETTING,PSIG / bar1 to 2.2 / 69 mbar to 0,15 2 / 0,14- 4 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Integral INTEGRAL Two-Stage TWO-STAGE Regulators REGULATORSTYPE R632TYPE R232Integral Two-Stage regulators combine a First-Stage regulator anda Second-Stage regulator into one compact unit. Recommendedfor installations where piping distance is short, integral Two-Stageregulators provide all of the advantages of Two-Stage regulation(refer to page 23). Fisher ® brand integral Two-Stage regulatorsare color coded gray for easy identifi cation. Vents are screenedwith standard Second-Stage vent orientation over the outlet.The Types R632 and R232 fi rst-stage screened vent is threadedto accept a 1/4-inch OD copper tube inverted fl are with a7/16-24 UN thread.Type R632 – is an Underwriters Laboratories (UL) listed regulatorwith a capacity of up to 850 000 BTU per hour / 9,6 SCMH,recommended for on-site cylinder installations, mobile homes anddomestic installations, where separation of the First and Second-Stage is not cost effective. This unit offers a POL inlet connectionfor the easy drop-in replacement of Single-Stage regulators.Type R632’s high capacity relief valve and large 3/4-inch screenedvent limit downstream pressure to less than 2 psig / 0,14 bar inan overpressure situation as required by NFPA 58. Type R632 isadjustable from 9 to 13-inches w.c. / 22 to 32 mbar, with a factorysetpoint of 11-inches w.c. / 27 mbar. The Type R632 featuresinclude the 20 year recommended replacement life.Type R632 has 1/8-inch NPT built-in gauge taps, orifi ced to aNo. 54 drill size, on the upstream and downstream sides. Thesetaps provide easy access for testing the proper operation of theFirst and Second-Stage while the system is pressurized. Thisregulator also features a large 3/4-inch drip-lip vent to reduce thechance of blockage by freezing rain or sleet when properly installedwith the vent pointing down.Type R232 – Designed for installations with small capacity loadsup to 450 000 BTU per hour / 5,1 SCMH. With an overall lengthof 6.5 or 7-inches / 165 or 178 mm for NPT or FPOL connectionsrespectively, this compact unit fi ts easily into confi ned spacesand is ideal for ASME tanks used on small domestic loads.Intermediate and outlet gauge taps facilitate easy system testing.A 3/8-inch NPT vent allows easy installation of vent piping. Useof a valve stem and lever provide stable regulation and excellentdurability. A large fabric-reinforced diaphragm provides accurateregulation. The large orifi ce assists in minimizing freeze problems.Stainless steel internal and corrosion resistant coatings provideexcellent corrosion resistance. The Type R232 also has the designthat provides a recommended replacement life of 20 years.Twin Cylinder Installations – The Type R232 can also be usedon twin cylinder hook-ups found on travel trailers and stationaryapplications. These units offer a drip-lip vent style for installationswithout a vent protector. Proper installation requires the vent to bepointed down in a vertical position. Additional protection may berequired if road splatter is a problem.A Type P414 manifold can be installed in the regulator’s inlet. TheType P414 is a tee check style with a check disc that blocks thefl ow to the reserve cylinder. The disc moves to either one sideof the manifold or the other depending upon which cylinder is tosupply gas.TYPE NUMBERCAPACITIES INBTU per hour / SCMHPROPANE (1)Integral Two-Stage RegulatorsINLET CONNECTION,INCHESOUTLET CONNECTION,INCHESR232A-BBF1/4 FNPTR232A-BBFXA (2)550,000 / 5,1R232A-HBFFPOL1/2 FNPTR232A-HBFXA (2)R632A-BCF850,000 / 8,41/2 FNPTR632A-BCFXA (2)1/4 FNPTR632A-CFF950,000 / 9,6 3/4 FNPTR632A-CFFXA (2)R632A-HCF850,000 / 8,41/2 FNPTR632A-HCFXA (2)FPOLR632A-JFF850,000 / 9,6 3/4 FNPTR632A-JFFXA (2)1. Based on 30 psig / 2,1 bar inlet pressure and 2-inches w.c. / 5 mbar droop.2. First and Second-Stage spring case vents opposite gauge taps.*See page 5 for intregral 2PSI RegulatorsOUTLETADJUSTMENT RANGE,INCHES W.C. / mbar9.5 to 13/ 24 to 329 to 13/ 22 to 32OUTLETPRESSURE SETTING,INCHES W.C. / mbar11 / 27CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 5 -

2psi Integral Two Stage RegulatorsType NumberR232E-BBHR232E-HBHR632E-BCHR632E-HCHR632E-CFHR632E-JFH2 PSI INTEGRAL TWO-STAGE REGULATORSInlet Connection Outlet Connection Capacity (1) Outlet Pressure1/4-inch FNPTF.POL1/2-inch FNPT 500,000 2 psig / 0.14 bar1/4-inch FNPT850,0001/2-inch FNPTF.POL 900,0001/4-inch FNPT3/4-inch FNPT 850,000F.POL2 psig / 0.14 bar(1): Capacities based on 30 psig / 2.07 bar inlet pressure and 2 inches w.c. / 5 mbar droop(2): Capacities based on 30 psig / 2.07 bar inlet pressure and 20% droop- 6 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Second-Stage regulator which reduces the pressure to 11-inches w.c./ 27 mbar for appliances.Type R962 eliminates gas outage problems by switching from thenearly empty cylinder to the reserve cylinder automatically. Gas iswithdrawn from the supply cylinder until pressure reaches about7 psig / 0,48 bar. The changeover manifold then switches to the fullcylinder. A red warning fl ag appears in the built-in indicator to showthe changeover has taken place. Additional protection for the ventmay be required for Type R962 to prevent wheel spray from blockingthe vent with mud on mobile installations. Type R962 does notcomply with NFPA 58 or UL 144.Automatic Changeover RegulatorsTYPE R962-31TYPE NUMBER (1)HIGH CAPACITY RELIEFR962-31(Types R110 and R622)CAPACITIES IN BTU per hour /SCMH PROPANE (1)Automatic Changeover RegulatorsINLETCONNECTION, INCHESOUTLETCONNECTION, INCHESVENTSIZE, INCHES600 000 / 6,7 1/4 Inverted Flare 1/2 FNPT 3/4 FNPT1. Capacity based on 30 psig / 2,1 bar inlet pressure, 11-inches w.c. / 27 mbar outlet pressure setting, and 2-inches w.c. / 5 mbar droop.TYPE 64SR-122Commercial Automatic Changeover RegulatorsDesigned for large capacity multi-cylinder or tank installations,these regulators are used on applications such as bakeries,motels, restaurants, and grain dryers. The manifold portion ofthe assembly consists of two 64 Series regulators and a directmounted 803 Series indicator.Type 64SR-122 – For high pressure (pounds to pounds) servicewith the outlet pressure supplied by a Type 64SR that has internalrelief protection.TYPE NUMBERCAPACITIES INBTU per hour / SCMHPROPANE (1)Commercial Automatic Changeover RegulatorsINLET CONNECTION,INCHESOUTLET CONNECTION,INCHESOUTLET PRESSURESETTING, PSIG / barOUTLET ADJUSTMENTRANGE, PSIG / bar64SR-122 1 210 000 / 13,6 1/2 FNPT 1/2 FNPT 10 / 0,69 5 to 20 / 0,34 to 1,4CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 7 -

AUTOMATIC Automatic CHANGEOVER Changeover REGULATORS RegulatorsTYPE R130-21TYPE 749B-21Changeover Manifold AssembliesType R130-21 – Composed of two Type 67C regulators and aspecial 0 to 60 psig / 0 to 4,1 bar pressure gauge, the Type R130delivers a 45 psig / 3,1 bar outlet pressure on supply and 30 psig/ 2,1 bar on reserve. The gauge, which serves as the changeoverindicator, is painted red from 0 to 35 psig / 0 to 2,4 bar. When thedial reads in the 0 to 35 psig / 0 to 2,4 bar range, it indicates that themanifold has switched from the supply to the reserve cylinder.Type 749B-21 – Large capacity changeover manifold for commercialand industrial applications. It consists of two 64 Series regulatorsand a 803 Series direct indicator. The assembly is used primarilyin conjunction with either an Type HSRL or a Type 64SR regulator.The standard outlet setting is 15 psig / 1,0 bar from the supply and5 psig / 0,34 bar from the reserve.Note: These units are intended for use with Second-Stageregulators and/or separate relief devices which provideoverpressure protection required by NFPA 58. Capacity ofall these changeover manifolds is dependent on the size ofthe Second-Stage regulator with which they are used. If themanifolds are used as a Final-Stage (pounds to pounds), arelief valve is required in the downstream system.TYPE NUMBERCAPACITIES INBTU per hour / SCMHPROPANE (1)Changeover Manifold RegulatorsINLETCONNECTION, INCHESOUTLETCONNECTION, INCHESOUTLET PRESSURE SETTINGSupply Setting,psig / barReserve Setting,psig / barR110-21 500 000 / 5,6 1/4 Inverted Flare 1/4 FNPT 15 / 1,0 7 / 0,48R130-21 1 475 000 / 16,6 1/4 FNPT 1/4 FNPT 45 / 3,1 30 / 2,1749B-21 1 500 000 / 16,9 1/2 FNPT 1/2 FNPT 15 / 1,0 5 / 0,341. Based on 100 psig / 6,9 bar inlet, reserve setting.Remote Indicator803 Series – give remote visual indication that the supply cylinderis empty and that the regulator is withdrawing gas from the reservecylinder. The indicator has 360° visibility and is weatherproof.Type 803-21 – Indicator onlyTYPE 803-21- 8 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

COMMERCIAL/INDUSTRIAL HIGH PRESSURE REGULATORSCommercial/Industrial High Pressure RegulatorsTYPE 67CW TYPE 67CH TYPE 67CD TYPE 67CN67C SeriesSuitable for liquid or vapor service, the 67C Series high pressure(pounds to pounds) regulators are used on a variety of applications.All types within the series have a 1/4-inch FNPT side outlet in whicha pressure gauge (J500 Series) can be installed. The compactsize of the 67C Series regulators make them particularly useful oninstallations where space is limited.The regulator design utilizes precise guiding of the valve plug toprovide close regulation and high performance.Type 67CW – Standard regulator with wrench adjustment.Type 67CH – Standard regulator with handwheel adjustment.Type 67CD – With dial calibration accuracy nearly equivalent to that ofa commercial pressure gauge, the Type 67CD eliminates the need for apressure gauge on portable applications.Outlet pressure is calibrated on the spring case allowing visualadjustment of the outlet pressure without having to use a pressuregauge. The unit is ideal for service where gauge breakage isa problem.Type 67CN – Extremely compact unit with a fixed (non-adjustable)outlet setting and a tamper resistant spring case. Three differentsetpoints are available: 10, 15, and 20 psig / 0,69; 1,0; and 1,4 bar.Note: 67C Series regulators do not have an internal reliefand should be installed with additional/external overpressureprotection. These units should not be installed in fixed pipingserving 14-inches w.c. / 35 mbar appliance systems.Please consult with your LP-Gas Equipment Distributor formore information.TYPE NUMBER67CW-683DESCRIPTIONHigh Pressure RegulatorsCAPACITIES IN BTU per hour/ SCMH PROPANE (1)OUTLET PRESSURESETTING, psig / barOUTLET ADJUSTMENTRANGE, psig / bar675 000 / 7,6 15 / 1,0 3 to 20 / 0,21 to 1,467CW-684 Basic Regulator750 000 / 8,4 20 / 1,4 3 to 35 / 0,21 to 2,467CW-685 (Wrench Adjustment) 1 200 000 / 13,5 40 / 2,8 30 to 60 / 2,1 to 4,167CW-701 1 000 000 / 11,3 50 / 3,4 50 to 120 / 3,4 to 8,367CH-751675 000 / 7,6 15 / 1,0 3 to 20 / 0,21 to 1,467CH-743 Basic Regulator750 000 / 8,4 20 / 1,4 3 to 35 / 0,21 to 2,467CH-742 (Handwheel Adjustment) 1 200 000 / 13,5 40 / 2,8 30 to 60 / 2,1 to 4,167CH-741 1 000 000 / 11,3 50 / 3,4 50 to 120 / 3,4 to 8,367CH-745Basic Regulator(Handwheel Adjustment)with Type M318 installed750 000 / 8,4 20 / 1,4 3 to 35 / 0,21 to 2,4INLET AND OUTLETCONNECTIONS, INCHES1/4 FNPT67CD-100675 000 / 7,6 15 / 1,0 5 to 20 / 0,34 to 1,467CD-102 Dial Cap Adjustment 1 200 000 / 13,5 40 / 2,8 20 to 50 / 1,4 to 3,467CD-103 1 000 000 / 11,3 50 / 3,4 40 to 100 / 2,8 to 6,967CN-106400 000 / 4,5 10 / 0,69 Non-Adjustable67CN-104 Non-Adjustable600 000 / 6,7 15 / 1,0 Non-Adjustable67CN-105 750 000 / 8,4 20 / 1,4 Non-Adjustable1. Based on inlet pressure 20 psig / 1,4 bar greater than outlet with 20% droop; Liquid capacity = 3 to 5 GPH / 11,4 to 18,9 l/hr .CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 9 -

COMMERCIAL/INDUSTRIAL HIGH PRESSURE REGULATORSCommercial/Industrial High Pressure Regulators64 SERIES64 SeriesHigh pressure (pounds to pounds) regulators usually reduce tankpressure to an intermediate pressure for use by another regulator.They may be used as high pressure regulators on distributionsystems when used in conjunction with a First-Stage downstreamregulator. The Type 64SR may be used for First-Stage when set at10 psig / 0,69 bar. They are also used for Final-Stage service onhigh pressure burners in crop dryers and tobacco curers, as well asother medium sized commercial/industrial applications.The 1/4-inch FNPT side outlet, which is normally plugged, providesan opening for an outlet pressure gauge. Standard 64’s Series arecapable of handling liquid or vapor at temperatures under 150°F/ 66°C. A cover or auxiliary vent assembly should be used to protectthe 1/4-inch FNPT regulator vent opening on outdoor installations.64 Series – is an adjustable high pressure regulator with a widerange of available outlet pressure ranges. It does not contain a reliefvalve. It should always be used in conjunction with a downstreamregulator and/or separate relief devices in compliance with NFPA 58overpressure protection requirements.Type 64SR – is a high pressure regulator, which has an internalrelief valve. As such it may be used as a Final-Stage regulatoron high pressure systems. It may also be used as a First-Stageregulator when set at 10 psig / 0,69 bar or less.Note: 64 Series regulators do not have an internal reliefand should be installed with additional/external overpressureprotection. These units should not be installed in fixed pipingserving 14-inches w.c. / 35 mbar appliance systems.Please consult with your LP-Gas Equipment Distributor formore information.Note: If the installation location makes the ignition of ventedgas a possibility, then a vent line should be installed from theType 64SR vent to a safe location.High Pressure RegulatorsTYPE NUMBERDESCRIPTIONCAPACITIES IN BTU per hour/ SCMH PROPANE (1)OUTLET PRESSURESETTING, psig / barOUTLET ADJUSTMENTRANGE, psig / barINLET AND OUTLETCONNECTIONS, INCHES64-332 625 000 / 29,6 10 / 0,69 3 to 15 / 0,21 to 1,064-35 3 600 000 / 40,5 20 / 1,4 5 to 35 / 0,34 to 2,4Basic Regulator64-36 4 150 000 / 46,7 40 / 2,8 30 to 60 / 2,1 to 4,164-222 5 250 000 / 59,1 50 / 3,4 35 to 100 / 2,4 to 6,91/2 FNPT64SR-212 625 000 / 29,6 10 / 0,69 3 to 15 / 0,21 to 1,064SR-22With InternalRelief Valve3 000 000 / 33,8 15 / 1,0 5 to 20 / 0,34 to 1,464SR-23 3 600 000 / 40,5 20 / 1,4 5 to 35 / 0,34 to 2,41. Based on inlet pressure 20 psig / 1,4 bar greater than outlet with 20% droop; Liquid capacity = 160 GPH / 606 l/hr.- 10 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

COMMERCIAL/INDUSTRIAL DIRECT-OPERATED HIGH PRESSURE REGULATORSCommercial/Industrial Direct-Operated High Pressure RegulatorsTYPE 627TYPE 630For Commercial and Industrial high-pressure applications likefactories, office building, restaurants, etc., Regulator Technologieshas a wide variety of products. For ease of reference, only the mostpopular commercial and industrial regulators are shown in thesepages. Other orifice sizes, body sizes, and outlet pressure rangesare available. The higher capacities on commercial and industrialinstallations usually require a Two-Stage regulator system.Note: Because of various spring ranges and orifice sizes, allcommercial and industrial regulators should be individuallysized for the particular installation. Consult specific productbulletins for maximum pressure ratings. Contact your localLP-Gas Equipment Distributor for assistance.Types 627 and 630 – Large capacity direct-operated highpressure regulators designed for loads up to 10 700 000 and14 000 000 BTU per hour / 120 and 157 SCMH, respectively. TheTypes 627 and 630 are normally used in conjunction withType CS400 units, however, they can also be used on Final-Stage(pounds to pounds) service. Additional overpressure protection isrecommended to prevent excessive build-up in the downstreamline. The diaphragm case and body of the Type 627 can berotated in four positions to allow easy installation. Additionalconfi gurations of the Type 627 with internal relief and control lineconnections for monitor systems are available. For both theTypes 630 and 627, additional pressure ranges and orifi ce sizesare available.Note: Types 627 and 630 regulators do not have an internalrelief and should be installed with additional/externaloverpressure protection. These units should not be installedas part of a 2-stage system in fixed piping serving14-inches w.c. / 35 mbar appliance systems unless additionaloverpressure protection is installed that will make the systemcompliant with NFPA 58 requirements for a 2-stage system.Please consult with your LP-Gas Equipment Distributor formore information.Flanged Bodies – The Type 630 and Type 627 are available withfl anged bodies. Flanges are available for 2-inch CL300 FF.Overpressure Protection – The Type 627 is also available inmonitor confi gurations. Note that the Type 627 monitor regulatorshave unique type numbers. For more information on monitoroverpressure protection, see Page 42.Fluorocarbon Trim – The Type 627 is available with Fluorocarbon(FKM) Trim for high temperature applications such as vaporizors.Part numbers are listed below with a ‘V’ suffix.Type 1301F – The proven reliability and accurate regulation of theType 1301F regulator makes it ideal for numerous high-pressuredrop applications. This multi-purpose regulator can be used as pilotsupply or pressure-loading regulators where high-pressure operatingmedium must be reduced for use by gas regulator pilots or pressureloadedregulators.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 11 -

COMMERCIAL/INDUSTRIAL DIRECT-OPERATED HIGH PRESSURE REGULATORSCommercial/Industrial Direct-Operated High Pressure RegulatorsHigh Pressure Commercial/Industrial RegulatorsTYPENUMBERCAPACITIES INBTU per hour / SCMHPROPANEORIFICE SIZE,INCHES / mmINLET AND OUTLETCONNECTIONSOUTLET PRESSURERANGE, psig / barOUTLET PRESSURESETTING, psig / barMAXIMUM OPERATING INLETPRESSURE, psig / bar627R-113 (5) 6 080 000 / 68,4200 / 13,8627-5810 (3) 6 080 000 / 68,4 3/8 / 9,5250 / 17,2627-5810V 6 080 000 / 68,4 250 / 17,2627M-421 (4) 10 755 000 / 1213/4-inch FNPT 5 to 20 / 0,34 to 1,4 10 / 0,69250 / 17,2627R-117 (5) 10 755 000 / 121 200 / 13,81/2 / 13627-6210 (3) 10 755 000 / 121 250 / 17,2627-6210V 10 755 000 / 121 250 / 17,2627R-193 (5) 7 434 000 / 83,55 to 20 / 0,34 to 1,4 10 / 0,69 200 / 13,8627-117 14 632 000 / 164250 / 17,23/8 / 9,5627-493 14 632 000 / 164 15 to 40 / 1,0 to 2,8 40 / 2,8250 / 17,2627R-194 (5) 14 632 000 / 164 200 / 13,8627-496 10 773 000 / 121250 / 17,2627-576 10 773 000 / 121 250 / 17,21-inch FNPT627M-471 (4) 10 773 000 / 121 250 / 17,25 to 20 / 0,34 to 1,4 10 / 0,69627R-197 (5) 10 773 000 / 121 200 / 13,81/2 / 13627-7710 (3) 10 773 000 / 121 250 / 17,2627-7710V 10 773 000 / 121 250 / 17,2627-497 14 837 000 / 167250 / 17,215 to 40 / 1,0 to 2,8 40 / 2,8627R-198 (5) 14 837 000 / 167 200 / 13,8627-577 20 948 000 / 235250 / 17,21/2 / 13 2-inch FNPT 15 to 40 / 1,0 to 2,8 40 / 2,8627M-268 (4) 20 948 000 / 235 250 / 17,2630-104/78 14 000 000 / 158 1/2 / 13 2-inch FNPT 8 to 20 / 0,55 to 1,4 10 / 0,69 250 / 17,2630-104/78F 14 000 000 / 158 1/2 / 132-inch / DN 50CL300 FF8 to 20 / 0,55 to 1,4 10 / 0,69 250 / 17,21301F-1 3 863 000 / 43,5 (2) 5/64 / 2,0 1/4-inch FNPT 10 to 75 / 0,69 to 5,2 75 / 5,2 6000 / 4141. For Types 627 and 630, capacity based on inlet pressure 20 psig / 1,4 bar greater than outlet pressure, Internal registration, and 20% droop.2. Capacity based on 2000 psig / 138 bar inlet pressure and 10% droop.3. UL listed construction.4. For Monitor Applications. Standard with blocked throat and external sensing.5. “R” denotes token relief. Check with your LP-Gas Equipment Distributor on relief capacities.NOTE: Additional spring ranges and body styles are available. Ask your LP-Gas Equipment Distributor for additional configurations and for more information.- 12 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

CommerCial/industrial pilot-operated HigH pressure regulatorsCommercial/Industrial Pilot-Operated High Pressure RegulatorsTYPE 99For Commercial and Industrial high-pressure applications, such asdistributed community systems, factories, office buildings, restaurants,Regulator Technologies has a wide variety of products and solutions.For ease of reference, only the most popular commercial and industrialregulators are shown on these pages. Other orifice sizes, body sizes,and outlet pressure ranges are available. The higher capacities oncommercial and industrial installations usually require a Two-stageregulator system.Note: Because of various spring ranges and orifice sizes, allcommercial and industrial regulators should be individually sizedfor the particular installation. Consult specific product bulletinsfor maximum pressure ratings. Contact your local LP-GasEquipment Distributor for assistance.Type 99 – Pilot-operated unit keeps outlet pressure constant despitevarying flow rates and inlet pressures. Designed to handle loadsup to 74 318 000 BTU per hour / 837 SCMH, the Type 99 is idealfor multiple customer installations. The unique pilot design, with fastopening and closing operation, makes the Type 99 ideal for largeindustrial boiler applications. The Type 99 can be used for low or highpressure applications. A downstream control line is required. Additionaloverpressure protection is recommended to prevent excessive buildupin the downstream line.Note: Type 99 regulators do not have an internal relief andshould be installed with additional/external overpressureprotection. These units should not be installed as part of a2-stage system in fixed piping serving 14-inches w.c. / 35 mbarappliance systems unless additional overpressure protectionis installed that will make the system compliant with NFPA 58requirements for a 2-stage system. Please consult with yourLP-Gas Equipment Distributor for more information.Flanged Bodies - 99F Series is equipped with 2-inch CL300flanged bodies.Overpressure Protection - The Type 99 is also available in monitorconfigurations. Note that the Type 99 monitor regulators haveunique type numbers. For more information on monitor overpressureprotection, see page 41.TYPENUMBERCAPACITIES INBTU per hour / SCMHPROPANE (1)Pilot-Operated High Pressure Commercial/Industrial RegulatorsORIFICE SIZE,INCHES / mmINLET AND OUTLETCONNECTIONSOUTLET PRESSURERANGE, psig / barOUTLET PRESSURESETTING, psig / bar99-510P2-inch FNPT 7-inches w.c. to 229 400 000 / 33199F-510P2-inch / DN 50 CL300 FF / 17 mbar to 0,141 / 69 mbar99-511P2-inch FNPT33 206 000 / 37499F-511P2-inch / DN 50 CL300 FF1 to 5 / 69 mbar to 0,34 5 / 0,3499-513P2-inch FNPT36 368 000 / 4092 to 10 / 0,14 to 0,69 10 / 0,6999F-513P2-inch / DN 50 CL300 FF7/8 / 2299-512P2-inch FNPT37 950 000 / 4275 to 15 / 0,34 to 1,0 15 / 1,099F-512P2-inch / DN 50 CL300 FF99-515P2-inch FNPT41 112 000 / 46399F-515P2-inch / DN 50 CL300 FF10 to 20 / 0,69 to 1,4 20 / 1,499-903P2-inch FNPT44 275 000 / 49899F-903P2-inch / DN 50 CL300 FF10 to 65 / 0,69 to 4,5 30 / 2,199-502PH2-inch FNPT50 600 000 / 57099F-502PH2-inch / DN 50 CL300 FF1 to 5 / 69 mbar to 0,34 5 / 0,3499-503PH 61 668 000 / 694 2-inch FNPT99F-503PH 61 668 000 / 694 2-inch / DN 50 CL300 FF2 to 10 / 0,14 to 0,69 10 / 0,6999-504PH 63 250 000 / 712 2-inch FNPT1-1/8 / 2999F-504PH 63 250 000 / 712 2-inch / DN 50 CL300 FF5 to 15 / 0,34 to 1,0 15 / 1,099-505PH 67 993 000 / 765 2-inch FNPT99F-505PH 67 993 000 / 765 2-inch / DN 50 CL300 FF10 to 20 / 0,69 to 1,4 20 / 1,499-901PH 74 318 000 / 837 2-inch FNPT99F-901PH 74 318 000 / 837 2-inch / DN 50 CL300 FF10 to 65 / 0,69 to 4,5 30 / 2,11. Capacity based on inlet pressure 20 psig / 1,4 bar greater than outlet pressure, external registration, and 20% droop.NOTE: Additional spring ranges and body styles are available. Ask your LP-Gas Equipment distributor for more information.MAXIMUM OPERATINGINLET PRESSURE,psig / bar250 / 17,2300 / 20,7CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 13 -

CommerCial/industrial Commercial/Industrial Pilot-Operated pilot-operated High HigH Pressure pressure Regulators regulatorsTYPE 1098-EGRTYPE 1098-EGRType 1098 - The Type 1098-EGR regulator provides large capacitiesfor use in large commercial applications and large distributedcommunity systems. Designed to handle loads from 170 000 000 BTU/ 1910 SCM (2-inch size) to in excess of 1 000 000 000 BTU /11 234 SCM (4-inch size) and rated to 75 psig / 5,2 bar for MaximumOutlet Pressure, the Type 1098H is a regulator unmatched inperformance in the LP-Gas Industry. The Type 1098’s pilot-operatedtwo-path system is designed to quickly respond to sudden changesin the downstream demand, making this regulator ideal for fuel gassupply to industrial boilers, furnaces, ovens, and mixers.Type 1098H - The Type 1098H-EGR regulator also provides largecapacities used in systems similar to Type 1098. The Type 1098Huses a special cast iron actuator assembly that increases the MaximumDownstream Pressure rating of the standard Type 1098 up to300 psig / 20,7 bar, offering an even greater level of protection withoutlet pressure settings up to 125 psig / 8,6 bar.Flanged Bodies - The Types 1098 and 1098H are available withflanged bodies. Flanges are available in 2, 3, and 4-inch body sizesand CL300 FF end connection.Note: Type 1098 regulators do not have an internal relief andshould be installed with additional/external overpressureprotection. These units should not be installed as part of a2-stage system in fixed piping serving 14-inches w.c. / 35 mbarappliance systems unless additional overpressure protectionis installed that will make the system compliant with NFPA 58requirements for a 2-stage system. Please consult with yourLP-Gas Equipment Distributor for more information.Overpressure Protection - The Type 1098H is also available inmonitor configurations. Note that the Type 1098H regulators may beused either as the worker or monitor regulator. For more information onmonitor overpressure protection, see page 41.The Type 1098 regulator is a highly advanced regulator with manyconfigurations for various applications. Always consultRegulator Technologies to discuss your application prior toplacing your order.TYPENUMBERCAPACITIES INBTU per hour / SCMHPROPANEPilot-Operated High Pressure Commercial/Industrial RegulatorsORIFICE SIZE,INCHES / mmINLET AND OUTLETCONNECTIONSOUTLET PRESSURERANGE, psig / barOUTLET PRESSURESETTING, psig / bar1098-L211098-L22170 500 000 / 1915 (1)215 300 000 / 2419 (2) 2-inch FNPT2 to 10 / 0,14 to 6,93 to 40 / 0,21 to 2,710 / 6,920 / 1,41098-L23 322 300 000 / 3621 (3) 35 to 75 / 2,4 to 5,2 50 / 3,42-3/8 / 601098-F21 170 500 000 / 1915 (1) 2 to 10 / 0,14 to 6,9 10 / 6,91098-F22 215 300 000 / 2419 (2) 2-inch / DN 50 CL300 FF 3 to 40 / 0,21 to 2,7 20 / 1,41098-F23 322 300 000 / 3621 (3) 35 to 75 / 2,4 to 5,2 50 / 3,41098-F31 356 300 000 / 4003 (1) 2 to 10 / 0,14 to 6,9 10 / 6,91098-F32 447 400 000 / 5026 (2) 3-3/8 / 86 3-inch / DN 80 CL300 FF 3 to 40 / 0,21 to 2,7 20 / 1,41098-F33 669 500 000 / 7521 (3) 35 to 75 / 2,4 to 5,2 50 / 3,41098-F41 551 300 000 / 6193 (4) 2 to 10 / 0,14 to 6,9 10 / 6,91098-F42 693 500 000 / 7791 (4) 4-3/8 / 111 4-inch / DN 100 CL300 FF 3 to 40 / 0,21 to 2,7 20 / 1,41098-F43 1 035 500 000 / 11 633 (3) 35 to 75 / 2,4 to 5,2 50 / 3,4NOTE: Additional spring ranges and body styles are available. Ask your LP-Gas Equipment Distributor for more information.1. Capacity based on 30 psig / 2,1 bar inlet pressure and 15 psig / 1,0 bar setpoint.2. Capacity based on 40 psig / 2,8 bar inlet pressure and 20 psig / 1,4 bar setpoint.3. Capacity based on 75 psig / 5,2 bar inlet pressure and 50 psig / 3,4 bar setpoint.4. Capacity based on 25 psig / 1,7 bar inlet pressure greater than outlet pressure setting.MAXIMUM OPERATINGINLET PRESSURE,psig / bar400 / 27,6- 14 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

CommerCial low pressure Commercial regulators Low Pressure RegulatorsTYPE CS200TYPE CS400 TYPE CS800 NEWRegulator Technologies has a wide range of low-pressure regulatorsto meet almost any commercial or industrial application. For easeof reference, only the most popular commercial and industrialregulators are shown on this page. Other orifi ce sizes, body sizes,and outlet pressure ranges are available. See the product guides onpages 37 and 39.Note: Because of various spring ranges and orifice sizes, allcommercial and industrial regulators should be individuallysized for the particular installation. Consult specific productbulletins for maximum pressures ratings. Contact your localLP-Gas Equipment Distributor for assistance.Type CS400 – The Type CS400 is a medium capacity low pressure,direct-operated regulator designed for loads up to 7 800 000 BTUper hour / 88 SCMH, ideal for installations at schools, bakeries, andmany other commercial/industrial applications. Available in 1-1/4,1-1/2, and 2-inch body sizes with spring ranges from 4.5-inches w.c.to 5.5 psig / 11 mbar to 0,38 bar.Type CS200 – The Type CS200 is a medium capacity lowpressure, direct-operated regulator designed for loads up to3 800 000 BTU per hour / 44 SCMH, ideal for installations on smallercommercial/industrial applications. Available in 3/4, 1, and 1-1/4-inchbody sizes with spring ranges from 3.5-inches w.c. to 2 psig / 9 mbarto 0,14 bar.Flanged Bodies – The Types CS400 and CS800 are available with afl anged body. Flanges are available in 2-inch / DN 50 body size andCL125 FF end connection.Type CS800 – The Type CS800 is a direct-operated, spring-loadedregulator which has been engineered for low pressure commercialservice applications. This regulator can accommodate up to21 600 000 BTU per hour / 243 SCMH of fl ow capacity and isavailable in 1-1/2 and 2-inch body sizes with 8-inches w.c. to5.5 psig / 20 mbar to 0,38 bar pressure ranges.Note: Types CS200, CS400, and CS800 regulators should beinstalled with additional/external overpressure protection.These units when installed as part of a 2-stage system in fixedpiping serving 14-inches w.c. / 35 mbar appliance systemsrequire additional overpressure protection to make the systemcompliant with NFPA 58 requirements for a 2-stage system.Please consult with your LP-Gas Equipment Distributor formore information.CAPACITIES INTYPE NUMBER BTU per hour / SCMHPROPANE (1)CS200IR-6EC1 2 500 000 / 28ORIFICE SIZE,INCHES / mmLow Pressure Commercial RegulatorsINLET AND OUTLETCONNECTIONS,INCHES3/4 FNPTCS200IR-6EC3 3 800 000 / 43 1/2 / 12,71 FNPTCS200IR-6EC6 3 900 000 / 44 1-1/4 FNPTCS400IR-8EC6 6 800 000 / 761-1/4 FNPTCS400IR-8EC7 7 600 000 / 85 3/4 / 19,1 1-1/2 FNPTCS400IR-8EC8 7 600 000 / 85 2 FNPTCS800IR-8CC7 10 460 000 / 1181-1/2 FNPT1 / 25,4CS800IR-8CC8 21 809 000 / 245 2 FNPTCS200IR-6HC1 3 760 000 / 423/4 FNPTCS200IR-6HC3 4 780 000 / 54 1/2 / 12,71 FNPTCS200IR-6HC6 5 327 000 / 60 1-1/4 FNPTCS400IR-8HC6 9 715 000 / 1091-1/4 FNPTCS400IR-8HC7 10 500 000 / 118 3/4 / 19,1 1-1/4 FNPTCS400IR-8HC8 8 775 000 / 99 2 FNPTCS820IR-8FC7 15 011 000 / 1691-1/2 FNPT1 / 25,4CS820IR-8FC8 21 436 000 / 241 2 FNPTCS400IR-8IC6 7 365 000 / 831-1/4 FNPTCS400IR-8IC7 6 895 000 / 77 3/4 / 19,1 1-1/2 FNPTCS400IR-8IC8 7 365 000 / 83 (2) 2 FNPTCS820IR-8HC7 15 262 000 / 1711-1/2 FNPT1 / 25,4CS820IR-8HC8 16 532 000 / 186 2 FNPTOUTLETPRESSURE RANGE10 to 14-inches w.c. / 25 to 35 mbarOUTLETPRESSURESETTING11-inches w.c./ 27 mbarMAXIMUM OPERATINGINLET PRESSURE,psig / bar40 / 2,820 / 1,48 to 12-inches w.c. / 20 to 30 mbar 30 / 2,11 to 2 psig / 0,06 to 0,14 bar2 psig / 0,14 bar40 / 2,820 / 1,41 to 2.5 psig / 0,06 to 0,17 bar 30 / 2,12 to 5.5 psig / 0,14 to 0,38 bar5 psig / 0,35 bar20 / 1,42.5 to 5.5 psig / 0,17 to 0,38 bar 30 / 2,11. Capacities are based on 10 psig / 0,69 bar and 2-inches w.c. / 5 mbar droop.2. Capacities are based on 10 psig / 0,69 bar and 20% droop.NOTE: Additional combinations of body sizes, spring ranges, and orifi ce sizes are available. See guides on Page 37. Consult your LP-Gas Equipment distributor formore information.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 15 -

CommerCial serviCe low pressure regulatorsCommercial Service Overpressure ProtectionType CS200 Selection GuideBASE SENSING RELIEF ORIFICE REGULATOR SETPOINTS BODY OPTIONCODE DESCRIPTION CODE DESCRIPTION CODE DESCRIPTION CODESIZEInch / mmCODE Inches w.c. / mbar CODE DESCRIPTIONCS200 Basic I Internal N None 1 1/8 / 3,2 A 3.5 to 5 / 9 to 12 C1R Internal 2 3/16 / 4,8 B 4.5 to 6.5 / 11 to 16 C33 1/4 / 6,4 C 6 to 8 / 15 to 20 C65 3/8 / 9,5 D 7.5 to 11 / 19 to 276 1/2 / 12,7 E 10 to 14 / 25 to 35F 12 to 19 / 30 to 473/4-inch FNPT,Cast Iron1-inch FNPT,Cast Iron1-1/4-inch FNPT,Cast IronGH18 to 1 psig / 45 mbar to 0,06 bar1 to 2 psig / 0,06 to 0,13 barType CS400 Selection GuideBASE SENSING RELIEF ORIFICE REGULATOR SETPOINTS BODY OPTIONCODE DESCRIPTION CODE DESCRIPTION CODE DESCRIPTION CODESIZEInch / mmCODE Inches w.c. / mbar CODE DESCRIPTIONCS400 Basic I Internal N None 2 3/16 / 4,8 A 3.5 to 5 / 9 to 12 C6E External R Internal 3 1/4 / 6,4 B 4.5 to 6.5 / 11 to 16 C7T Token 5 3/8 / 9,5 C 6 to 8 / 15 to 20 C86 1/2 / 12,7 D 7.5 to 11 / 19 to 27 C98 3/4 / 19,1 E 10 to 14 / 25 to 35F 12 to 19 / 30 to 47GH18 to 1 psig / 45 mbar to 0,06 bar1 to 2 psig / 0,06 to 0,13 barI 2 to 5.5 psig / 0,14 to 0,381-1/4-inch FNPT,Cast Iron1-1/2-inch FNPT,Cast Iron2-inch FNPT,Cast Iron2 inch / DN 50CL150 FF,Ductile IronType CS800 Selection GuideBASE SENSING RELIEF ORIFICE REGULATOR SETPOINTS BODY OPTIONCODE DESCRIPTION CODE DESCRIPTION CODE DESCRIPTION CODESIZEInch / mmCODE Inches w.c. / mbar CODE DESCRIPTIONCS800 Basic I Internal N None 2 1/4 / 6,4 A 3.5 to 6 / 9 to 15 C6CS820 High Outlet E External R Internal 3 3/8 / 9,5 B 5.5 to 8.5 / 11 to 16 C7T Token 4 1/2 / 12,7 C 8 to 12 / 15 to 20 C8Q High Capacity 6 3/4 / 19,1 D 10 to 16 / 25 to 40 C98 1 / 25,4 E 14 to 30 / 25 to 75 D119 1-3/8 / 34,9 F 1 to 2.5 psig / 0,06 to 0,17 barGH1.5 to 3.5 / 0,10 to 0,24 bar2.5 to 5.5 / 0,17 to 0,38 bar1-1/4-inch FNPT,Gray Iron1-1/2-inch FNPT,Gray Iron2-inch FNPT,Gray Iron2-inch / DN 50CL125 FFGray Iron2-inch / DN 50CL150 FF,Ductile Iron- 16 -37CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

COMMERCIAL SERVICE Commercial OVERPRESSURE Service Overpressure PROTECTION ProtectionTypes CS205 and CS206Secondary Seat Protection3/4-inch FNPT to 1-1/4-inch Body Sizes1.83 to 2.24 MBTU per hour / 20,6 to 25,2 SCMHPRIMARY DISCSECONDARY ORIFICESEATING SURFACEType CS205: CS200 platform with a modifi ed orifice that containsa second sealing surface. Should damage occur to the primaryseating surface, outlet pressure will continue to rise and preventlockup. The additional pressure will cause the disc to push themodified orifi ce into the secondary sealing surface to provide abubble tight lockup.Type CS206: CS205 Secondary Seat with a limited bleed todownstream system as an indication that the secondary seat isproviding lockup. The minimal amount of gas will cause theInternal Relief to begin to discharge, allowing the odorant in the gasto be detected.SECONDARY SEATLOCKUPSETPOINT TYPE CS205 TYPE CS206Inches w.c./ mbarShutoff above SetpointSECONDARY SEATLOCKUP WITH BLEEDDownstream PressureBuildup7 / 17 5-inches w.c. / 12 mbar 25.1-inches w.c. / 62 mbar11 / 27 5.5-inches w.c. / 14 mbar 29.6-inches w.c. / 74 mbar14 / 35 5.8-inches w.c. / 14 mbar 1.26 psig / 0,08 bar1 psig / 0,07 bar 7.8 inches w.c. / 19 mbar 1.90 psig / 0,13 bar2 psig / 0,14 bar 13-inches w.c. / 32 mbar 3.42 psig / 0,24 barType CS403 with IntegralTrue-Monitor Protection1-1/4-inch FNPT to 2-inch FNPT Body Sizes(2-inch / DN 50 CL150 Flange Available)7.65 to 8.44 MBTU per hour / 85,9 to 94,8 SCMHInternal RegistrationType CS403: Combines operation of a conventional two-regulatorwide-open monitor set into one body. During normal operation, themonitor is in a wide open state at a setpoint higher than the primaryregulator. If the downstream pressure should rise due to loss ofcontrol by the primary regulator, the integral monitor will assumecontrol and regulate the fl ow to the downstream system.PRIMARYSETPOINTMONITORSETPOINTTYPE CS403MONITOR SPRING RANGEInches w.c. mbar Inches w.c. / mbar Spring Range7 / 17 14 / 35 11 to 16-inches w.c. / 27 to 40 mbar11 / 27 21 / 52 16 to 23-inches w.c. / 40 to 57 mbar14 / 35 21 / 52 16 to 23-inches w.c. / 40 to 57 mbar1 psig / 0,07 bar 1.5 psig / 0,10 bar 1 to 2 psig / 0,07 to 0,14 bar2 psig / 0,14 bar 2.5 psig / 0,17 bar 1.5 to 2.5 psig / 0,10 to 0,17 bar5 psig / 0,35 bar 6 psig / 0,41 bar 4 to 7.5 psig / 0,28 to 0,52 barType CS404 with Integral Slam shut1-1/4-inch FNPT to 2-inch FNPT Body Sizes(2-inch / DN 50 CL150 Flange Available)7.65 to 8.44 MBTU per hour / 85,9 to 94,8 SCMHInternal RegistrationType CS404: Integrates a fast acting shutoff device that providesoverpressure shutoff (OPSO) or over/underpressure shutoff (UPSO/OPSO) protection by completely shutting off the fl ow of gas to thedownstream system. The Slam Shut operates independently ofthe main regulator, and does not affect normal operation unless thedownstream pressure fl uctuates outside of the desired ranges.TYPE CS404PRIMARYSLAM-SHUT SETPOINTSETPOINTOPSOUPSO - OPSOInches w.c. / mbar Inches w.c. / mbar Inches w.c. / mbar7 / 17 17 / 42 - - - -11 / 27 19 / 47 6.3 / 16 - 25 / 6214 / 35 30 / 75 8.8 / 22 - 28 / 701 psig / 0,07 bar 1.9 psig / 0,13 bar 16 / 40 - 1.9 psig / 0,13 bar2 psig / 0,14 bar 3.3 psig / 0,23 bar 1 psig / 0,07 bar - 3.2 psig / 0,22 bar5 psig / 0,35 bar 6.7 psig / 0,46 bar 2.9 psig / 0,20 bar - 7.5 psig / 0,52 barCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 17 -

industrial Industrial Service serviCe Low low Pressure pressure Regulators regulatorsTYPE 133HOR 133LTYPE 299HTYPE 99LRegulator Technologies has a wide range of low-pressure regulatorsto meet almost any commercial or industrial application. For easeof reference, only the most popular commercial and industrialregulators are shown on this page. Other orifi ce sizes, body sizes,and outlet pressure ranges are available.Note: Because of various spring ranges and orifice sizes, allcommercial and industrial regulators should be individuallysized for the particular installation. Consult specific productbulletins for maximum pressures ratings. Contact your localLP-Gas Equipment Distributor for assistance.Type 299H – A high capacity pilot-operated regulator. Incorporatesa lightweight design (21 pounds / 10 kg) with dependable operation.With a capacity up to 38 000 000 BTU per hour / 428 SCMH, theType 299H is ideal for applications from large commercial sites tosmaller multi-dwelling establishments. The unit comes with a 1-1/2or 2-inch cast iron body with internal or external registration. Internalregistration allows easy installation while external registration provideshigher accuracy. 2-inch / DN 50 flanged body, or steel body materialalso available. Alternate outlet settings from 3.5-inches w.c. to 60 psig/ 9 mbar to 4,1 bar are available. The Type 299H has maximuminlet pressure rating of 150 psig / 10 bar so it can not be used asa First-Stage regulator.Type 99L – Pilot-operated unit keeps outlet pressure constant despitevarying flow rates and inlet pressures. Designed to handle loads upto 63 250 000 BTU per hour / 712 SCMH, the Type 99L is ideal formultiple customer installations. The unique pilot design, with fastopening and closing operation, makes the Type 99L ideal for largeindustrial boiler applications. The Type 99L can be used for lowpressure. A downstream control line is required.133 Series – Self-operated Second-Stage regulator ideal for largeindustrial applications with loads up to 70 875 000 BTU per hour/ 798 SCMH. The unit can be used for either low pressure orpounds service. Maximum inlet pressure is 60 psig / 4,1 bar, and adownstream control line is required.Low Pressure Commercial/Industrial RegulatorsTYPE NUMBERCAPACITIES INBTU per hour / SCMHPROPANEORIFICE SIZE,INCHES / mmINLET AND OUTLETCONNECTIONS,INCHESOUTLETPRESSURE RANGEOUTLETPRESSURESETTINGMAXIMUM OPERATINGINLET PRESSURE,psig / barS201-CNC 21 600 000 / 243 1 / 25 2 FNPT9 to 18-inches w.c./ 22 to 44 mbar11-inches w.c./ 27 mbar25 / 1,7133L-4 70 875 000 / 798 (3)299H-101 13 100 000 / 148 (1) 1-1/2 FNPT 9 to 20-inches w.c.11-inches w.c.299H-102 19 700 000 / 222 (1) 2 FNPT/ 22 to 50 mbar/ 27 mbar299H-103 23 300 000 / 262 (2) 1-1/2 FNPT 6 to 16 psig10 psig / 0,69 bar299H-104 38 000 000 / 428 (2) 2 FNPT/ 0,41 to 1,1 bar3/4 / 19299H-1051-1/2 FNPT 9 to 20-inches w.c.11-inches w.c.20 400 000 / 230 (3)299H-106 2 FNPT/ 22 to 50 mbar/ 27 mbar299H-1071-1/2 FNPT 6 to 16 psig38 000 000 / 428 (4)299H-108 2 FNPT/ 0,41 to 1,1 bar10 psig / 0,69 bar7-inches w.c. to 2 psig99-501P 49 000 000 / 552 (6) / 17 mbar to 0,14 bar1 psig / 69 mbar99-502P 50 600 000 / 570 (6) 1-1/8 / 291 to 5 psig / 69 mbar to 0,34 bar 5 psig / 0,34 bar99-503P 61 650 000 / 694 (6) 2 to 10 psig / 0,14 to 0,69 bar 10 psig / 0,69 bar99-504P 63 250 000 / 712 (6) 2 FNPT5 to 15 psig / 0,34 to 1,0 bar 15 psig / 1,0 bar8.5 to 18-inches w.c.14-inches w.c./ 21 to 45 bar/ 35 mbar2 / 51133H-1 66 150 000 / 745 (5) 1.5 to 3 psig / 0,10 to 0,21 bar 3 psig / 0,21 bar150 / 10,3150 / 10,360 / 4,11. Capacity based on inlet pressure of 10 psig / 0,69 bar, Internal Registration and 2-inches w.c. / 5 mbar droop.2. Capacity based on inlet pressure of 20 psig / 1,4 bar higher than outlet pressure, Internal Registration and 20% droop.3. Capacity based on inlet pressure of 10 psig / 0,69 bar, External Registration and 2-inches w.c. / 5 mbar droop.4. Capacity based on inlet pressure 20 psig / 1,4 bar higher than outlet pressure, External Registration and 2-inches w.c. / 5 mbar droop.5. Capacity based on inlet pressure of 10 psig / 0,69 bar, External Registration, and 20% droop.6. Capacity based on inlet pressure of 20 psig / 1,4 bar higher than outlet pressure, External Registration and 20% droop.NOTE: Additional spring ranges and body styles are available. Ask your LP-Gas Equipment Distributor for more information.- 18 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

MONITOR Monitor OVERPRESSURE Overpressure PROTECTION ProtectionMonitoring is overpressure control by containment. When theworking pressure reducing valve ceases to control the pressure,a second regulator installed in series, which has been sensingthe downstream pressure, goes into operation to maintain thedownstream pressure at a slightly higher than normal pressure.The monitoring concept is gaining in popularity, especially inlow-pressure systems, because very accurate relay points permitreasonably close settings of the working and monitoring regulators.When selecting regulators for use in a monitor system, the upstreamregulator must have a control line. When determining the capacityof a monitor system you will get approximately 70% to 73% of thecapacity of a single regulator when using the same regulator for bothregulators in the system.September 2006Type 1098-EGRType 1098-EGR Upstream or Downstream “Wide-Open” MonitorC477Jet BleedInternalValveH2821098SecondR622Stageat Each House11” WCSet PointR222September 2006Type 1098-EGRType 1098-EGR TYPE Upstream 627M (DIRECT-OPERATED) or Downstream “Wide-Open” MONITOR MonitorLiquidVaporEPREPRFirst StageRegulators10 PSISet PointR622H99PILOT SUPPLY REGULATOREmergencyShutoff Valve (ESV)R632299HORIntegral Two-Stageat Each HouseCS404R232INLET PRESSUREOUTLET PRESSURELOADING PRESSUREATMOSPHERIC PRESSUREINTERMEDIATE PRESSURE6350 SERIES PILOTTYPE 1098H (PILOT-OPERATED) MONITORA6789COMMUNITY SYSTEM MAPINLET PRESSUREOUTLET PRESSURELOADING PRESSUREATMOSPHERIC PRESSUREINTERMEDIATE PRESSUREThe major advantage is that there is no venting to atmosphere.During an overpressure situation, monitoring keeps the customeron line and keeps the downstream pressure relatively close to thesetpoint of the working regulator. Testing is relatively easy andsafe. To perform a periodic test on a monitor, increase the outlet setpressure of the working device and watch the pressure to determineif the monitor takes over.Fisher ® offers a wide variety of products for monitor applications.Provided for your reference below is a list of commonly usedregulators for various capacity requirements. Note that Pilotoperated regulators may be used in conjuntion with self operatedregulators in monitor applications, depending on the applicationrequirement. Please call your local LP-Gas Equipment Distributor toreview your monitor requirementsA6789Typical Wide-Open Monitor SystemOPERATINGREGULATORORIFICE SIZE,INCHES / mmBODY SIZE,INCHESMONITORREGULATORORIFICE SIZE,INCHES / mmBODY SIZE,INCHESREGULATING CAPACITY,BTU per hour / SCMH (1)Type 627-5810 3/8 / 9,53 3/4 NPT Type 627M-421 1/2 / 12,7 3/4 NPT 5 750 000 / 64,6Type 627-6210 1/2 / 12,7 3/4 NPT Type 627M-421 1/2 / 12,7 3/4 NPT 7 050 000 / 79,2Type 627-7710 1/2 / 12,7 1 NPT Type 627M-421 1/2 / 12,7 1 NPT 7 050 000 / 79,2Type 630-104/78 1/2 / 12,7 2 NPT Type 627M-267 1/2 / 12,7 2 NPT 8 400 000 / 94,4Type 630-104/78 1/2 / 12,7 2 NPT Type 99M-504PH 1-1/8 / 28,6 2 NPT 13 500 000 / 152Type 99-504PH 1-1/8 / 28,6 2 NPT Type 99M-504PH 1-1/8 / 28,6 2 NPT 42 650 000 / 479Type 99-504PH 1-1/8 / 28,6 2 NPT Type 1098 2-3/8 / 60,3 2 NPT 54 500 000 / 612Type 1098 2-3/8 / 60,3 2 NPT Type 1098 2-3/8 / 60,3 2 NPT 136 900 000 / 1538Type 1098 2-3/8 / 60,3 3 NPT Type 1098 3-3/8 / 85,7 3 NPT 283 700 000 / 3187Type 1098 2-3/8 / 60,3 4 NPT Type 1098 4-3/8 / 111 4 NPT 437 800 000 / 49181. Capacities are based on 30 psig / 2,1 bar in and 8 psig / 0,55 bar out.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 19 -

Backpressure BACKPRESSURE Regulators/Relief REGULATORS/RELIEF Valves VALVESRelief Valve for Liquid ServiceType 98H – is a self-operated relief valve for use on relief andbackpressure applications involving large LP-Gas pumping systemsand vaporizers. Internal pressure registration eliminates the need fora control line.TYPE 98HTYPENUMBER98H-1398H-14BODYSIZE, INCHES1/2 FNPT98H-22 3/4 FNPT98H-30 1 FNPTRELIEF PRESSURERANGE, psig / bar25 to 75/ 1,7 to 5,270 to 140/ 4,8 to 9,770 to 140/ 4,8 to 9,770 to 140/ 4,8 to 9,7Liquid Service Relief ValvesRELIEF PRESSURESETTING, psig / bar50/ 3,4100/ 6,9100/ 6,9100/ 6,95 psig/ 0,34 bar10.5/ 39,78.4/ 31,830.8/ 11730.8/ 117PROPANE RELIEF CAPACITY GPM / l/min AT FOLLOWINGPRESSURE BUILD-UP OVER RELIEF SETTING10 psig/ 0,69 bar15.4/ 58,315.4/ 58,349.0/ 18549.0/ 18520 psig/ 1,4 bar21.7/ 82,127.3/ 10367.9/ 25767.9/ 25730 psig/ 2,1 bar25.9/ 98,032,9/ 12579.8/ 30279.8/ 30250 psig/ 3,4 bar30.8/ 11739.2/ 14893.1/ 35293.1/ 352Diaphragm Relief ValvesType 1805 – relief valve are designed for installation between theFirst and Second-Stage regulators or in the downstream line from ahigh pressure regulator used for a Final-Stage service. Available in1 or 2-inch valve bodies.Type 289H – relief valve is designed for installation downstreamof a large Second-Stage regulators like the Type CS400.The larger diaphragm in this relief valve provides extremelysensitive operation.TYPE 1805-19P TYPE 289H-2TYPENUMBERBODY SIZE,INCHESRELIEF PRESSURESETTING, psig / barDiaphragm Relief ValvesRELIEF ADJUSTMENTRANGE, psig / barPROPANE RELIEF CAPACITY AT FOLLOWINGPRESSURE BUILD-UP OVER RELIEF SETTINGBuild-up overset pressure,psig / barCapacity,SCFH / SCMH1805-19P 1 FNPT 30 / 2,1 10 to 60 / 0,69 to 4,1 15 / 1,0 2840 / 80,41805-52P 2 FNPT 30 / 2,1 10 to 50 / 0,69 to 3,4 15 / 1,0 12 000 / 340289H-2 2 FNPT 1.0 / 0,0714-inches w.c. to 2.25/ 35 mbar to 0,161 / 69 mbar 11 000 / 311289H-43 1 FNPT 15 / 1,0 10 to 20 / 0,69 to 1,4 5 / 0,34 20 000 / 566289H-42 1 FNPT 10 / 0,69 4 to 15 / 0,28 to 1,0 5 / 0,34 17 600 / 498- 20 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Y602-3 - - - - 3/8-inch O.D. TubingNoY602-4 - - - - (Flare Connection)Yes- - - - Y602-5No3/8-inch FNPT- - - - Y602-6 Yes- - - - Y602-7No1/2-inch FNPT- - - - Y602-8 Yes- - - - Y602-9 3/4-inch FNPT No- - - - Y602-23 3/4-inch MNPT No- - - - Y602-25 1-inch MNPT NoAppliance RegulatorsTYPE 912-101Small Portable Appliance RegulatorsType 912 – Designed for use on small portable outdoor appliances.Underwriters Laboratory (UL) requires horizontally mountedregulators to be installed with vent opening protection toprevent blockage by freezing rain. Vent protector Type P331 canbe used on a horizontally mounted Type 912.TYPENUMBERPRESSURE RANGEInches w.c. / mbarOUTLETPRESSUREInches w.c. / mbarAppliance RegulatorsCapacities in BTU per hour Propane10 psig, Inlet 25 psig, Inlet 100 psig, InletINLETCONNECTION,Inches / mmOUTLETCONNECTION,Inches / mmORIFICESIZE,Inches / mm912-194 (1) 3 to 7 / 7 to 17 5 / 12 101 000 151 000 - - - - 1/4 / 6,4 1/4 / 6,4 0.073 / 1,85912-104 9.25 to 13 / 23 to 32 11 / 27 101 000 270 000 349 000 1/4 / 6,4 1/4 / 6,4 0.073 / 1,85912N-109 (1) 5 to 10 / 12 to 25 7 / 17 123 000 232 000 556 000 1/4 / 6,4 3/8 / 9,5 0.073 / 1,85912-101 9.25 to 13 / 23 to 32 11 / 27 110 000 201 000 494 000 1/4 / 6,4 3/8 / 9,5 0.073 / 1,85912-122 9.25 to 13 / 23 to 32 11 / 27 110 000 201 000 494 000 1/4 / 6,4 3/8 / 9,5 0.073 / 1,85912H-1081. Not UL listed.0.5 to 2.7 psig/ 0,03 to 0,19 bar1.5 psig / 103 131 000 202 000 470 000 1/4 / 6,4 3/8 / 9,5 0.094 / 2,39CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 21 -

Underwriters Laboratory (UL) requires horizontally mountedRegulator AccessoriesTYPE 50-2TYPE 50P-2TYPE P100ATYPE P100CMounting BracketsMounting brackets are used to mount regulators securely to thecontainer or to the side of the building.REGULATORTYPEMounting BracketsBRACKET STYLETriangular Bowtie StrapR622, R632, R642,and R622HP100A P100C - - - -R122H, R222,and R232P100A - - - - - - - -912 P100A - - - - P102ATYPE 50P-5Test Gauge AssembliesThe 50 Series test gauges are used to check appliance line pressureafter the regulator has been installed.TYPENUMBERTest Gauge AssembliesINLETCONNECTIONHOSEPLASTICRANGE,INCHES W.C. /mbar1/4-inch50-2NoNoMNPTREGULATOR ACCESSORIES 0 to 3550P-2YesYes / 0 to 87Female Hose50P-5 Yes NoTYPE Y602-1 (UMBRELLA TYPE)TYPE Y602-13 (ANGLE TYPE)Vent AssembliesAttached directly to the regulator vent connection to a regulatorvent line, vent assemblies should be pointed downward on outdoorinstallations to avoid moisture build-up in the regulator spring case.Units with stabilizer assembly are intended for regulators with stabilityproblems. The stabilizer gives a restricted breathing rate undernormal conditions, opening for rapid discharge when necessary.Vent AssembliesTYPE NUMBERSIZESTABILIZERUmbrella TypeAngle Type- - - - Y602-13No1/4-inch FNPT- - - - Y602-14 YesY602-1 - - - -No1/4-inch MNPTY602-2 - - - - YesY602-3 - - - - 3/8-inch O.D. TubingNoY602-4 - - - - (Flare Connection)Yes- - - - Y602-5No3/8-inch FNPT- - - - Y602-6 Yes- - - - Y602-7No1/2-inch FNPT- - - - Y602-8 Yes- - - - Y602-9 3/4-inch FNPT No- - - - Y602-23 3/4-inch MNPT No- - - - Y602-25 1-inch MNPT NoCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869- 22 -Small Portable Appliance RegulatorsGOLDSBORO, NC (800) 426-9293Type 912 – Designed for use on small portable outdoor appliances.

Internal Valves ValVesjeTBLEEDjeTBLEEDFLOWFLOWlIMITedBLEEDlIMITedBLEED1 VALVE CLOSE 2 JET BLEED 3 VALVE OPEN 4 LIMITED BLEEDEQUALIZATIONJET BLEED EQUALIZATIONVALVE OPEN FLOWLIMITED BLEED1. Because of the integral back check function of these valves, selective filling of manifold storage tanks requires the use of additional shutoff valves.Fisher ® brand internal valves have gained wide field acceptance for use as primary shutoff valves, excess flow valves and back checkvalves (1) . Internal valves are installed in the inlets and outlets (liquid or vapor) of pressure vessels and in piping systems to control the flow ofLP-Gas and NH 3(anhydrous ammonia). The most frequent application is on bobtail and transport truck tanks, but they may also be used onlarge stationary storage tanks and on in-line installations. The valves can be used in conjunction with or without pumps and compressors.Features and Benefits• Patented rapid equalization bleed area* —provides fast valve response for quick opening.• Unique Serviceability Features* —Removable gland packing, stainless trim parts, and poppet designed with integral wrench flat for easymaintenance.• Durable Design—Stainless poppet and stem* interface smoothly for a long wear life.• Excess Flow Closure—Functions when flow exceeds the valves rated capacity or piping is sheared off at the valve.• Back Check Feature—Allows reverse flow, fill with or without actuator device in valve open position.• Spring loaded PTFE stub shaft packingTM• PTFE wear pads and Rulon Bushings at critical wear points• Manual, Cable or Air Open/Close Control• Thermal Fusible links or plugs melt at 212° to 220°F / 100° to 104°C and allow valve closure in the event of a fire at the valve.Principle of OperationThe operational schematic below depicts threaded valves,however flanged styles operate in the same manner. For detailedinformation, refer to the Instruction Manual provided with the valve.View #1The valve is held closed by both tank pressure and the valve’sclosing spring. There is no leakage past the resilient seats in thepoppet to the valve outlet.View #2The valve is opened by moving the operating lever to approximatelymidpoint in its 70° travel. This allows the cam to place the rapidequalization portion of the valve stem in the pilot opening, permittinga larger amount of product to bleed downstream than if the operatinglever were moved to the full open position.View #3When tank and downstream pressure are nearly equal after a fewseconds, the excess flow spring pushes open the main poppet andthe operating lever can be moved to the full open position.If tank pressure is greater than the valve’s outlet pressure, themain poppet will remain in the closed position. If valve outletpiping is closed off by other valves, however, product bleedingthrough the pilot will increase until it nearly equals tank pressureand the main poppet opens. The main poppet will not open ifvalve outlet piping is not closed off so that the outlet pressure canapproach tank pressure.View #4Once the main poppet opens, a flow greater than the valve’s excessflow spring rating or a sufficient surge in flow forces the main poppetclosed against the excess flow spring. The pilot valve allows a smallamount of product to bleed, but much less than view # 2 where therapid equalization portion of the stem is placed in the pilot opening.When the operating lever is moved to the closed position, the valvecloses completely and seals tightly (view #1).* Unique to the jet Bleed design only.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 23 -

threaded Threaded Internal ValVes ValvesC407 SERIESC477 SERIESC471 SERIESThreaded Internal ValvesRegulator Technologies offers the widest variety of threaded internalvalves in the industry. While their most frequent use is in the liquidand vapor openings of bobtail and transport trucks, the valves canalso be used in stationary storage tanks, complying with NFPA 58requirements. designed as primary shutoff valves, the units aredesigned with several features that help control product discharge.Steel and stainless steel constructions are standard throughout withtotal stainless steel construction available. The valves have springloadedPTFe packing for an effective seal against leakage. Standarddisc material is Nitrile (NBR), but PTFe, Perfl uoroelastomer (FFKM),Fluorocarbon (FKM), ethylenepropylene (ePdM), and Neoprene areavailable. (Note: PTFe seats are not bubble tight.)All Fisher ® brand internal valves are suitable for lP-Gas or anhydrousammonia (NH 3) service. Special construction is available for othercompressed gases. All threaded internal valves have a compact,one-piece body design. They can be actuated manually, by cablecontrol, or with an air cylinder.C407-10 Series (1-1/4-inch / DN 32 Body Size) – An excellent valvefor vapor return lines on bobtail trucks. Other applications includeuse as a main valve on small capacity pumping systems, anhydrousammonia (NH 3) nurse tanks and in-line installations.C400 Series (2 and 3-inch Body Sizes)Regulator Technologies offers three different body styles in 2 and3-inch NPT sizes so that the best body style can be selected for theparticular application.C477 Series (Straight-Through Body) – The most compact andeconomical unit in the Series, the C477 Series has one bottom outlet.The C477 Series can be used on bobtail, transport, stationary tankand in-line installations.C471 Series (Tee Body) – This unit is designed with two outlets,bottom and side. The side outlet permits installing horizontal pipingimmediately adjacent to the tank without the need for extra pipefi ttings. either connection can be used for truck fi lling or withdrawal.The C471 Series is used primarily on bobtails and transport trucks.CONNECTIONSINLET X OUTLETThreaded Internal ValvesTYPE NUMBER CLOSING FLOW GPM / l/min PROPANE (2) VAPOR CAPACITY SCFH / SCMH PROPANE (2)100 psigStraight Body Tee Body Half Coupling Full Coupling 25 psig / 1,7 bar Inlet/ 6,9 bar InletC407-10-03C407M-10-03 (1)- - - - 30 / 114 - - - - 5600 / 159 9300 / 2631-1/4-inch MNPT x1-1/4-inch FNPTC407-10-05C407M-10-05 (1)C407-10-08C407M-10-08 (1)- - - - 50 / 189 35 / 133 7800 / 221 13 200 / 374- - - - 80 / 303 65 / 246 11 200 / 317 19 200 / 5442-inch MNPT x2-inch FNPTC477-16-10 C471-16-10 100 / 379 60 / 227 26 100 / 739 45 000 / 1274C477-16-15 C471-16-15 150 / 568 90 / 341 39 400 / 1116 69 000 / 1954C477-16-25 C471-16-25 250 / 946 130 / 492 - - - - - - - -C477-24-16 C471-24-16 160 / 606 120 / 454 41 100 / 1164 71 000 / 20113-inch MNPT x3-inch FNPTC477-24-26 C471-24-26 265 / 1003 230 / 871 71 800 / 2033 127 000 / 3596C477-24-37 C471-24-37 375 / 1419 320 / 1211 99 000 / 2803 178 000 / 5040C477-24-46 C471-24-46 460 / 1741 380 / 1438 - - - - - - - -1. Includes a factory installed Type P340 / P341 latch.2. Closing Flows and Vapor Capacities listed are with valve in “bottom of tank” position. See product bulletins for additional data.- 24 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

f ff f“BOTTOM OF TANK” POSITIONthreaded Internal ValVesThreaded“BOTTOM OF TANK”InternalPOSITIONValves“TOP OF TANK” POSITION“TOP OF TANK” POSITION“HORIZONTAL” POSITION“BOTTOM OF TANK” POSITIONthreaded Internal ValVesthreaded Internal ValVesVALVE DIFFERENTIAL PRESSURE, psig / barVVVVa Valve VaaalavlvlvvveveeeDDDDi DiffDfifif fffffffffefefefeeeerrrerrrre rential reeeennnt nttititaiaiaaalPPPPr PrePrrre rrrrereeerreessss s ssuressssusuuururrre rrrrereeerree,, pppps psigpsssisgigigggVALVE DIFFERENTIAL PRESSURE, psig / barINTERNAL VALVE TANK POSITIONSThreaded Valve Specifications threaded Internal ValVesVVVVa Valve VaaalavlvlvvveveeeDDDDi DiffDfifif fffffffffefefefeeeerrrerrrre rential reeeennnt nttititaiaiaaalPPPPr PrePrrre rrrrereeerreessss s ssuressssusuuururrre rrrrereeerree,, pppps psigpsssisgigiggg“HORIZONTAL” POSITION“TOP OF TANK” POSITION“HORIZONTAL” POSITIONThreaded Valve SpecificationsDO NOT USE the excess flow DO function NOT USE the excess flow functionincorporated into FisherINTERNAL C Series incorporated internal into FisherVALVE TANK POSITIONSC Series internalPressure Rating: 400 psig / 27,6 bar WOGvalves or F Series excess flowPressure Rating: 400 psig / 27,6 bar WOGvalves to or F Series excess flow valves toTemperature: Up to 150°F / 66°Csatisfy the passive shutdown requirement INTERNAL in VALVE TANK POSITIONSTemperature: Up to 150°F / 66°C Threaded Valve Specificationssatisfy DO passive NOT USE the shutdown excess flow requirement functionBody: ductile iron (C471 and C477 Series)49CFR§173.315(n)(2). DO NOT include theinincorporated into FisherBody: ductile iron (C471 and C477 Series)49CFR§173.315(n)(2). DO NOT C Series internalCast steel (C407-10 Series)excess flow incorporated into Fisher C Seriesinclude thePressure Rating: 400 psig / 27,6 bar WOGvalves or F Series excess flow valves toPacking: PTFeinternal valves or F Series excessCast steel (C407-10 Series)excess flow valvesTemperature: Up to 150°F / 66°Cflow satisfy incorporated the passive shutdown into Fisher requirement C Series inSeat Discs: Synthetic rubberin a DCE certification under 49CFR§173.315(n)Packing: PTFeBody: ductile iron (C471 and C477 Series)internal valves 49CFR§173.315(n)(2). or F Series DO excess NOT include flow the valvesStub Shaft and Stem: Stainless steel(2). The cargo tank manufacturer must installCast steel (C407-10 Series)excess flow incorporated into Fisher C SeriesSeat Discs: Synthetic rubbersome other equipment that satisfies in a DCE the certification under 49CFR§173.315(n)Packing: PTFeinternal valves or F Series excess flow valvesrequirement for passive shutdownStub Shaft and Stem: Stainless steel(2). capability The cargo underSeat Discs: Synthetic rubberin a DCE tank certification manufacturer under 49CFR§173.315(n) must install! WARNING49CFR§173.315(n)(2).Stub Shaft and Stem: Stainless steelsome other (2). equipment The cargo tank that manufacturer satisfies must the installFailure to follow this warning requirement could result some in other equipment that satisfies thefor passive shutdown capability underA line break downstream of a pump may notserious personal injury or property damage requirement from for passive shutdown capability underactuate the excess flow valve. ! If any WARNINGbreak occurs! WARNING fire or explosion in the event of an unintentional 49CFR§173.315(n)(2).in the system or if the excess flow valve closes,release of product during an unload operation.the system should be shutdown immediately.A line break downstream of a pump may not Failure to Failure follow to follow this this warning could result in inserious personal injury or property damage fromA line break downstream actuate of a pump the excess may flow not valve. If any break occurs serious personal fire or explosion injury the or event property of an unintentional damage from“TOP OF TANK” POSITIONactuate the excess flow valve. in the system If any or break if the excess occurs flow valve closes, fire or explosion release of product in the during event an of unload an unintentionaloperation.in the system or if the excess the system flow should valve be closes, shutdown immediately.C477-24-36the system should C477/471-24 be shutdown “Bottom of immediately.Tank” Vertical Position Up Position Flow Curve, Half Couplingrelease of product during an unload operation.20 20/ 1,4C477-24-3618 18C477/471-24 “Bottom of Tank” Vertical Position Up Position Flow Curve, Half Coupling/ 1,220 2016 16“HORIZONTAL” / 1,4 POSITIONC477-24-36/ 1,118 18C477/471-24 “Bottom of Tank” Vertical Position Up Position Flow Curve, Half Coupling14 14/ 1,2/ 0,97 20 2016 1612 12 / 1,4INTERNAL VALVE / 1,1 TANK POSITIONSUnit 1/ 0,8318 1814 141010/ 0,97/ 1,2/ 0,6912 12Unit 188 16 16/ 0,83Unit 3/ 0,55 / 1,110106 6/ 0,69/ 0,41 14 148/ 0,978Unit 344/ 0,55/ 0,2812 126 62.514Unit 12/ 0,411.883/ 0,83/ 0,142544010/ 0,2810501502002.5140100250300350400450/ 0,6921.883/ 189/ 379/ 568/ 0,14Flow, GPM / 757Propane/ 946/ 1136 25/ 1325/ 1514/ 170388Unit 30 FLOW RATE, GPM / l/min PROPANE/ 0,555010015020025030035004004506 6/ 189/ 379/ 568 Flow, GPM / 757Propane/ 946/ 1136/ 1325/ 1514/ 1703/ 0,41160 GPM / 605 l/min RatingFLOW RATE, GPM / l/min PROPANE44 265 GPM / 1003 l/min Rating/ 0,28 375 GPM / 1419 l/min Rating460 GPM / 1741 l/min Rating160 GPM / 605 l/min Rating2.51421.883265 GPM / 1003 l/min Rating/ 0,1425375 GPM / 1419 l/min Rating0460 GPM / 1741 l/min Rating400450/ 1514/ 1703VALVE DIFFERENTIAL PRESSURE, psig / barVVVVa Valve VaaalavlvlvvveveeeDDDDi DiffDfifif fffffffffefefefeeeerrrerrrre rential reeeennnt nttititaiaiaaalPPPPr PrePrrre rrrrereeerreessss s ssuressssusuuururrre rrrrereeerree,, pppps psigpsssisgigiggg501502004000100250300350CONYERS, GA (800) 241-5652 / 189/ 379/ 568 Flow, GPM / 757Propane/ 946/ 1136/ 1325APOPKA, FL (800) 432-1869- 25 -GOLDSBORO, NC (800) 426-9293FLOW RATE, GPM / l/min PROPANE

Threaded threaded Internal Valves ValVes20/ 1,4C477-16-25 Vertical Up PositionVertrtical Up PositionC477/C471-16 “Bottom of Tank” Position Flow Curve, Half CouplingVALVE DIFFERENTIAL PRESSURE, psig / barVVVVa Valve Vaaallllvlvvveveee DDDDiiiif Diffiffff fffffffffefeeefferrrrereeerrennnnt ntial ntttitiiiaiaaallll PPPPrrrre Prereeerreessss s ssuressssuuuurrrrereeerree,,, ,pppps psigpsssiiiigiggg18/ 1,216/ 1,114/ 0,9712/ 0,8310/ 0,698/ 0,556/ 0,414/ 0,282/ 0,142.4941.058 1.32521.8832.51412.3670050100150200250300/ 189/ 379/ 568Flow GPM Propane/ 757/ 946/ 1136FLOW RATE, GPM / l/min PROPANE105 GPM / 397 l/min Rating150 GPM / 567 l/min Rating250 GPM / 946 l/min RatingUnit 1Unit 3VALVE DIFFERENTIAL PRESSURE, psig / bar40 / 2,835 / 2,430 / 2,125 / 1,720 / 1,415 / 1,010 / 0,695 / 0,350050/ 189100/ 379150/ 568VALVE CLOSED POSITION200/ 757250/ 946300/ 1136350/ 1325VALVE OPEN POSITION400/ 1514450/ 1703500/ 1893550/ 2082600/ 2271650/ 2460700/ 2650FLOW RATE, GPM / l/min PROPANEC477-24 Typical Reverse Flow CurveVALVE DIFFERENTIAL PRESSURE, psig / bar55 / 3,850 / 3,445 / 3,140 / 2,835 / 2,430 / 2,125 / 1,720 / 1,415 / 1,010 / 0,695 / 0,350050/ 189100/ 379VALVE CLOSED POSITION150/ 568200/ 757VALVE OPEN POSITION250/ 946300/ 1136350/ 1325FLOW RATE, GPM / l/min PROPANEC477-16 Typical Reverse Flow Curve- 26 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

threaded Threaded Internal ValVes ValvesB - MNPTB-MNPTCCLOSEDDAPPROXIMATE TOPOF BOSSOR COUPLINGCDE1/4-INCHAPPROXIMATE TOPOF BOSS ORCOUPLINGEA - FNPTA - FNPT70°70°SWINGSWINGC407-10 SERIES C477 SERIESCCLOSEDDABAPPROXIMATE TOP OFBOSS OR COUPLINGEHC471 SERIESFA70° SWING1/4-INCH FNPTThreaded ValvesTYPENUMBERA, INCH(FNPT)B, INCH(MNPT)DIMENSIONS, INCHES / mmC D E F HINSTALLATION CLEARANCEDIAMETER, INCHES / mmC407-10 1.25 1.25 5.90 / 150 1.86 / 47 2.88 / 73 - - - - - - - - 5.00 / 127C471-16 2 2 8.07 / 205 2.40 / 61 4.05 / 103 2.76 / 70 2.66 / 68 10.00 / 254C471-24 3 3 9.00 / 229 2.60 / 66 4.57 / 116 3.25 / 83 3.26 / 83 13.38 / 340C477-16 2 2 8.07 / 205 2.40 / 61 4.05 / 103 - - - - - - - - 10.00 / 254C477-24 3 3 9.00 / 229 2.60 / 66 4.57 / 116 - - - - - - - - 13.38 / 340XIn-Line AdaptorsYDZDIMENSIONS, INCHES / mmZX Y D1-1/4-inch FNPT 4.70 / 119 2.75 / 70 2.05 / 522-inch FNPT 6.77 / 172 3.5 / 89 2.80 / 713-inch FNPT 7.53 / 191 4.5 / 114 3.80 / 97IN-LINE ADAPTORCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 27 -

Flanged Internal Valves ValVesTYPE C483-24 TYPE C484-24Flanged Internal ValvesFlanged valves provide a sturdy and compact means of directlymounting a pump or piping connection. Special stud bolts,weakened with a groove on the outside diameter, are furnished withthe valves to permit the pump or piping to shear off in the event ofan accident, leaving the valve intact. A built-in excess fl ow valvereduces the chance of uncontrolled product discharge when fl owexceeds the rated fl ow capacity.All fl anged valves have an internal screen for pump protection thatcan be easily removed if the valve is used primarily for fi lling thetank. They also contain PTFe packing to resist stub shaft leakage.These valves can be activated manually, by cable control or by aircylinder (refer to pages 58 and 59).3-inch / DN 80 Flanged SizesType C484-24 – A single-fl ange unit widely used on bobtail andtransport trucks for a compact means of direct pump connectionto the valve outlet. Another application for the Type C484-24 is onin-line installations.Type C483-24 – A double-flange unit designed for special bobtailtruck applications where the pump must be lowered to clear the truckframe or other obstacles. A special shear section in the body permitsthe lower section of the valve to shear off in the event of an accident,leaving the critical shutoff parts within the tank.3-inch / DN 80 Flanged Internal ValvesSingle FlangeTYPE NUMBER CLOSING FLOW, GPM / l/min PROPANE CLOSING FLOW, GPM / l/min NH 3Double FlangeSingle Flanged,Bottom of Tank PositionDouble Flanged,Bottom of Tank PositionTop of Tank Position,Single - Double FlangedSingle - Double Flanged,Bottom of Tank PositionC484-24-16 C483-24-16 160 / 606 160 / 606 180 / 681 - 180 / 681 144 / 545 - 144/ 545C484-24-25 C483-24-26 250 / 946 265 / 1003 250 / 946 - 290 / 1098 239 / 905 - 226 / 855C484-24-40 C483-24-40 400 / 1514 400 / 1514 400 / 1514 - 400 / 1514 361 / 1366 - 361 / 1366100 psig / 6,9 bar Inlet,Single - Double Flanged, Standard PositionVAPOR CAPACITY SCFH / SCMH PROPANE100 psig / 6,9 bar Inlet,Single - Double Flanged, Inverted PositionC484-24-16 C483-24-16 71 000 / 0,8 - 71 000 / 0,8 96 000 / 1,1 - 96 000 / 1,1C484-24-25 C483-24-26 NOT lISTed - 127 000 / 1,4 NOT lISTed - 148 000 / 1,6C484-24-40 C483-24-40 181 000 / 2,0 - 181 000 / 2,0 190 000 / 2,1 - 190 000 / 2,1- 28 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Flanged Internal ValVes ValvesFlanged Valve SpecificationsPressure Rating: 400 psig / 27,6 bar WOGTemperature: Up to 150°F / 66°CBody: Cast steel, WCC (Types C483 and C484-24)Stainless steel (Type C484-32)Packing: PTFeSeat Discs: Synthetic rubberStub Shaft and Stem: Stainless steelGaskets: Non-asbestos spiral wound graphite! WARNINGA line break downstream of a pump may notactuate the excess flow valve. If any break occursin the system or if the excess flow valve closes,the system should be shutdown immediately.DO NOT USE the excess flow functionincorporated into Fisher ® C Series internalvalves or F Series excess flow valves tosatisfy the passive shutdown requirement in49CFR§173.315(n)(2). DO NOT include theexcess flow incorporated into Fisher C Seriesinternal valves or F Series excess flow valvesin a DCE certification under 49CFR§173.315(n)(2). The cargo tank manufacturer must installsome other equipment that satisfies therequirement for passive shutdown capability under49CFR§173.315(n)(2).Failure to follow this warning could result inserious personal injury or property damage fromfire or explosion in the event of an unintentionalrelease of product during an unload operation.Types C483-24 and C484-24 Typical Closing Flow Curve, Standard Position20/ 1,4VALVE DIFFERENTIAL PRESSURE, psig / bar18/ 1,216/ 1,114/ 0,9712/ 0,8310/ 0,698/ 0,556/ 0,414/ 0,282/ 0,140050/ 189100/ 379150/ 568200/ 757250/ 946300/ 1136350/ 1325400/ 1514450/ 1703FLOW RATE, GPM / l/min PROPANE160 GPM / 606 l/min RATING250 GPM / 946 l/min RATING (TYPE C484 ONLY)265 GPM / 1003 l/min RATING (TYPE C483 ONLY)400 GPM / 1514 l/min RATINGCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 29 -

Flanged Internal Valves ValVesTYPE C404-32TYPE C404A32TYPE C404M324-inch / DN 100 Flanged Size(Stainless Steel Construction)Type C404-32 – Used widely on transport trucks and large storagetanks, the 4-inch / dN 100 flanged unit comes standard with allstainless steel construction for maximum protection against rust andcorrosion. For easy field maintenance, the seat ring is field replaceable.The Type C404-32 is the only internal valve that cannot be openedand closed by the Type P650 cable control (refer to page 59).Factory installation of an air cylinder or manual operating handle(with remote release mechanism) is available on the 4-inch / dN 100flanged valves. Refer to ordering information below.TYPE NUMBER (1)Cable Air Manual4-inch / DN 100 Flanged Internal ValvesINLET,INCHES / DNOUTLET,INCHES / DNVAPOR CAPACITY ,CLOSING FLOW, SCFH / SCMH PROPANEGPM / l/minPROPANE (2) 25 psig / 1,7 bar 100 psig / 6,9 barInletInletC404-32-34 C404A-32-34 C404M-32-34340 / 1287 61 600 / 1745 104 800 / 2968C404-32-40 C404A-32-40 C404M-32-404 / 100 Cl300400 / 1514 63 900 / 1810 108 600 / 3076C404-32-60 C404A-32-60 C404M-32-60ASMe RF4 / 100Modifi edCl300 ASMe RF5-7/8 / 149 mm600 / 2271 83 200 / 2356 141 500 / 4007C404-32-80 C404A-32-80 C404M-32-80diameter bore800 / 3028 259 600 / 7352 356 200 / 10 088C404-32-100 C404A-32-100 C404M-32-100 1000 / 3785 - - - - - - - -1. 4-inch / dN 100 size available in single fl ange only.2. Closing fl ow vertical down.9/ 0,62VALVE DIFFERENTIAL PRESSURE, psig / bar8/ 0,557/ 0,486/ 0,415/ 0,354/ 0,283/ 0,212/ 0,141/ 0,0700100/ 379200/ 757300/ 1136400/ 1514500/ 1893600/ 2271700/ 2650800/ 3028900/ 34071000/ 3785FLOW, GPM / l/min PROPANETYPE C404-32 CAPACITY CURVE- 30 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Flanged Internal ValVesCBDAE6” STUD(8 REQUIRED)In-Line PipingDIMENSIONS, INCHES / mmOUTLETAB C D EASME CL300 RF Flange Pipe Size Reducer Minimum ASME CL300 RF Flange3-inch / dN 80 6 / 152 6 x 3 / 152 x 76 7.9 / 201 3-inch / dN 804-inch / dN 100 8 / 203 8 x 4 / 203 x 102 11.5 / 292 4-inch / dN 100Studding OutletO.D. AND THICKNESS TO SUITCONTAINER SPECIFICATIONS45°CD MAX.1 / 25 MIN.BAE3/4 / 19 -10 UNCINCHES/ mmMODIFIEDCL300 ASME RFFLANGETank ConnectionsDIMENSIONS, INCHES / mmMATINGFlANgE O.D.,INCHES / mmABCDBC No. SizeRFRFDE3-inch / dN 80 6.62 8 0.75 5.75 / 146 0.06 / 1,5 1.50 / 38 4.62 / 117 8.25 / 2104-inch / dN 100 7.88 8 0.75 7.00 / 178 0.06 / 1,5 1.56 / 40 5.88 / 149 10.00 / 254CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 31 -

Flanged Internal ValVesA3-INCH / DN 80CL300 ASME RF FLANGEMODIFIED [4.62 / 117DIAMETER BORE AND 5.75 /148 mm RF]A3-INCH / DN 80 CL300ASME RF FLANGEMODIFIED [4.62 / 117 DIAMETERBORE AND 5.75 / 148 mm RF]BB70°SWING70°SWINGTYPE C484-24 TYPE C483-244-INCH / DN 100CL300 ASME RF FLANGEMODIFIED [5.88 / 149DIAMETER BOREAND 7.00 RF]A1.56/ 39,6B4-INCH / DN 100CL300 ASME RF FLANGETYPE C404-32Flanged ValvesTYPE NUMBERTANK CONNECTIONS,INCHES / DNADIMENSIONS,INCHES / mmBC484-243 / 80Cl300 RF Flange6.75/ 1712.56/ 65C483-243 / 80Cl300 RF Flange5.33/ 1355.62/ 143C404-324 / 100Cl300 RF Flange7.55/ 1923.48/ 88- 32 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Internal ValVe ControlsAir Interlock SystemsAn air interlock system can be configured for transport and bobtailtrucks with air brakes by using air cylinder actuated internal valves.This system simultaneously interlocks the internal operation withthe truck air brakes without affecting normal air brake operation. Itcomplies with dOT MC331 and NFPA 58 requirements regardingthermal and remote release feasibility.The air interlock system permits the air brakes to set before theinternal valve opens – even if the truck operator forgets to set thebrakes. The brakes cannot be released until the internal valveis closed.In addition, a 4–way actuating valve can be used with Type C404A32to pressure both sides of the air cylinder depending upon the positionof the operating handle. This allows air pressure to close as well as toopen the internal valve.Emergency valve(hand valve)Fuse plugBrakeactuators(part ofbrake system)RelayvalveBackpressurevalveTwo-waycheck valveFuseplugService lineCylinderactuatorInternalvalveFuseplugFour-wayactuating valveAIR INTERLOCK HOOK-UP ON TRANSPORT TRUCKReservoir(part of truck air brake system)To Port 1 connectionon actuating valveRelayvalveEmergencyplug valve(hand valve)Line fromcompressor(supply)Brake actuators(part of truckair brakesystem)Two-waycheck valveCylinderactuatorFuse plugInternalvalveBrake line(service)BackpressurevalveFuseFour-way Fuse plugactuating valveAIR INTERLOCK HOOK-UP ON BOBTAIL TRUCKCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 33 -

Internal ValVe aCCessorIesTYPE P650TYPE P341TYPE P313TYPE P340Cable ControlsFisher ® brand cable controls and accessories can be furnished toremotely open and close all internal valves except the 4-inch / dN 100flanged size. This equipment can be used to comply with NFPA 58and dOT requirements for MC331 cargo tanks.Cable systems can also be used on stationary storage tanks at bulkplants and on in-line applications to increase safety during transferoperations. All fusible elements and links used in the cable controlsystems comply with NFPA 58 and MC331 requirements.Type P650 or P651 Primary Cable Control – Capable ofactuating all Fisher brand internal valves except the 4-inch/ dN 100 Type C404-32, the Type P650 or P651 opens and closesthe valve from a remote point, usually the rear of the bobtail ortransport. Pulling the handle of the primary control opens theinternal valve; pushing the handle closes the valve. There arethree notches on the primary control that give a travel of 4, 5, or6-inch / 102, 127, or 152 mm depending upon the travel requiredby the valve’s operating lever.Included with each Type P650 primary control is a 20-foot / 6,1 m cable,Type P134 fusible links, a return spring and mounting hardware. Ifjust the primary cable control is needed, order Type P651, which isavailable without any of the other accessories.Type P163A or P164A Auxiliary Remote Release – These unitsallow the internal valve to be closed from a location other than theprimary control point (Type P650 or P651). Pulling the auxiliaryrelease handle trips the release mechanism on the primary controlto close the internal valve.The two assemblies are identical except for the length. Type P163Ahas an untrimmed length of 25 feet / 7,6 m and Type P164A has anuntrimmed length of 50 feet / 15,2 m. Both cables can be trimmedto any length. Both releases can be installed through mountingbrackets up to 3/8-inch / 9,5 mm thick.Type P164B – a release assembly that uses 50 feet / 15 m of cablehousing which does not require elaborate guiding like uncoveredcables.Type P164C – an Auxiliary Remote Release without cable isalso available.Latch/Remote Release MechanismsWith the exception of the 3-inch / dN 80 fl anged sizes, all Fisherbrand internal valves can be fi tted with a manual latch/remoterelease mechanism. When the internal valve’s operating lever ismanually moved to the open position, the lever can be latched in theopen position. The lever can be released from a remote location bypulling on the cable attached to a pull ring, thus closing the internalvalve. A built-in fusible element in the latch/release melts if exposedto fire allowing the operating lever to return to the closed position.Type P340 – Fits all 2 and 3-inch NPT internal valves (Types C471and C477). Type P340 is easily installed in the fi eld by removingtwo of the three gland cap screws.Type P341 – Fits 1-1/4-inch NPT C407 Series internal valves. Alsoavailable factory installed, Type C407M10.Type P342 – Bi-directional latch/remote release for the 1-1/4-inch NPTC407-10 Series allows operation from two directions.Type P313 – Fits 4-inch / dN 100 Type C404-32 internal valves.Also available factory installed, Type C404M32. The Type P315remote release should be used with this release.INTERNAL VALVE SIZE,INCHES / DN1-1/4, 2, and 3/ 32, 50, and 80(NPT or Flanged)4 / 100 FlangedPRIMARY CABLECONTROLType P650 or P651 (1)Use Allegheny orWheaton ControlInternal Valve AccessoriesAUXILIARY REMOTERELEASEType P163A or P164ACABLEASSEMBLYIncludedwith Type P650LATCH/RELEASEMECHANISMType P341, P342(C407-10 Series)Type P340 (C400 Series)Type P315 Type P314 Type P313 (2)1. Type P651 is a primary control only, no accessories.2. Use with Type P315 remote release mechanism.- 34 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Internal ValVe aCCessorIesTYPE P613 TYPE P623 TYPE P639TYPE P614TYPE P315TYPE P631TYPE P389NOTE: INTERNAl VAlVES SHOWN ARE NOT INClUDED.4-inch / DN 100 Valve AccessoriesType P314 – This cable assembly is used as an attachment fromthe Type C404-32 operating lever to the primary cable control. Theassembly includes a 40-foot / 12,2 m cable, a special bushing with afusible element and clamp. The bushing fits in the valve-operatinglever and has a built-in fusible element that will melt if exposed to fire,allowing the Type C404-32 to close. The cable connects to the bushingand the clamp permits the other end of the cable to be attached to thefusible link (not furnished) at the primary cable control.Type P315 – On manually actuated 4-inch / dN 100 valves(Type C404M32), Type P315 remote handle release can be usedto close the internal valve from a remote location. Cable linkage(30 feet / 9,1 m) and mounting hardware are included.Pneumatic Actuator AccessoriesAll Fisher ® brand internal valves can be ordered with a pneumaticactuators that permits the valve to be opened and closed from aremote location. When air pressure is applied to the actuator, itmoves the actuator’s rod and internal valve operating lever to theopen position. Upon loss of air pressure, the valve’s operating leverreturns to the closed position. Besides air pressure, nitrogen orcarbon dioxide can also be used to pressure the actuators.Use of a pneumatic actuator permits the opening and closing of theinternal valve to be tied into the air brake of the transport or bobtail.Pneumatic Actuators can also provide a convenient way to remotelyoperate a number of internal valves on stationary storage tanks atbulk plants.Type P389 (1-1/4-inch / DN 32 Size) – This actuator can only beused with the C407-10 Series valve. All necessary hardware forinstalling the actuator is included. Minimum pressure is 60 psig/ 4,1 bar; maximum pressure is 250 psig / 17,2 bar.Types P613, P623, P639, and P614 Actuators – Also availablefactory installed (Type C404A32), the actuator attaches directly tothe valve after removal of the cable-operating lever. Included ineach assembly is an operating lever and mounting hardware.These actuators can only be used with the internal valves as specifiedon the table below. Minimum pressure is 20 psig / 1,4 bar; maximumpressure is 125 psig / 8,6 bar.Type P631 (1-1/4 inch / DN 32 Size) – This actuator features astainless steel enclosure for durability in harsh environments. Allnecesary hardware for installing the actuator is included. Thisactuator can only be used with C407-10 Series valve. Minimumpressure is 20 psig / 1,4 bar; maximum pressure is 40 psig / 2,8 bar.Fuse Plugs – When installed in the actuator piping at the valve, willallow the pneumatic pressure to vent closing the valve if the plug isexposed to temperature above 208° to 220°F / 98° to 104°C. Fuseplugs are available in two sizes, 1/8-inch NPT (T1140399982) and1/4-inch NPT (T1033699982).INTERNAL VALVETYPE NUMBERPNEUMATICACTUATOR TYPE NUMBERPneumatic Actuators Ordering InformationMAXIMUM INLET PRESSURE TOACTUATOR, psig / barMINIMUM OPERATING PRESSURE TOACTIVATE INTERNAL VALVE, psig / barC407-10 P389 250 / 17,2 60 / 4,1C407-10 P631 40 / 2,8 20 / 1,4C484-24 P613 125 / 8,6 20 / 1,4C483-24 P623 125 / 8,6 20 / 1,4C471 and C477(2 and 3-inch NPT Sizes)P639 125 / 8,6 20 / 1,4C404-32 P614 125 / 8,6 20 / 1,4CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 35 -

emergenCy shutoFF ValVesemergenCy shutoFF ValVesTYPE N550 (VALVE CLOSED) TYPE N550 WITH TYPE P327D TYPE N550 WITH TYPE P539ATYPE N550 (VALVE CLOSED) TYPE N550 WITH TYPE P327D TYPE N550 WITH TYPE P539ASnappy Joe TM Emergency Shutoff Valves forBulk PlantsSnappy Joe TM Emergency Shutoff Valves forBulk Snappy Plants joe TM Type N550 emergency Shutoff Valves (eSVs) aredesigned for in-line installations, usually near a bulkhead. Thevalves Snappy provide joe TM Type a means N550 of emergency shutting off Shutoff gas in the Valves event (eSVs) of a hose aredesigned rupture or for piping in-line break installations, at the transfer usually area near to a avoid bulkhead. a large The scalevalves loss of provide lP-Gas a or means anhydrous of shutting ammonia off gas (NH 3 in ). the event of a hoseruptureThe valvesor pipingcan bebreakmanuallyat theopenedtransferandareaclosedto avoidat thea largeinstalledscalelosslocationof lP-Gasor closedor anhydrousremotely byammoniaeither cable(NH 3 or).air. A remote operatingThe actuator valves is also can be available. manually opened and closed at the installedlocationHigh Flowor closedCapacityremotely– Thebymaineitherpoppetcablemovesor air.completelyA remote operatingout oftheactuatorfl ow streamis also available.for extremely low restriction-to-fl ow.OperationalHigh Flow CapacityEase – Moving– The mainthe operatingpoppet moveslever tocompletelythe verticaloutpositionofopensthe fl owthestreamvalve,formakingextremelyit simplelowtorestriction-to-fltell if the unitow.is open or closed.A Operational pilot valve in Ease the poppet – Moving opens the operating as the lever lever is moved to the vertical upward position toopens pressurize the valve, the hose. making Once it simple equalized, to tell the if the poppet unit is moves open quickly or closed. toA the pilot open valve position. in the poppet opens as the lever is moved upward topressurizeThe valve istheclosedhose.byOncesimplyequalized,pushing thetheleverpoppetdownmoveswithoutquicklyfirsttothehavingopentoposition.trip a latch. The operating lever is easily reached from acrossThe a bulkhead. valve is closed All sizes by look simply similar pushing and operate the lever exactly down without the same, first anhaving important to trip point a latch. in an emergency The operating situation. lever is easily reached from acrossaFusiblebulkhead.ElementAll sizes– Thelookfusiblesimilarelementand operateis locatedexactlyatthethesame,hub ofantheimportantoperatingpointleverinandanstubemergencyshaft. Whensituation.exposed to fire, the elementFusible melts allowing Element the – stub The shaft fusible to turn. element The is poppet located then at the moves hub of to theoperating closed position, lever and even stub if the shaft. operating When lever exposed has been to fire, wired the element open.meltsRuggedallowingConstructionthe stub shaft– Heavyto turn.dutyTheconstructionpoppet thenmakesmovesSnappyto thejoeclosed TM eSVsposition,suitableevenforif theuseoperatingas a “working”lever hasshutoffbeenvalvewiredforopen.theRugged transfer area, Construction even under – Heavy frequent duty use. construction The internal makes closing Snappy springjoe is protected TM eSVs from suitable the for elements use as and a “working” tampering. shutoff All seats valve and for the sealstransfer use metal area, back-up even seals under for frequent extended use. fire The resistance. internal closing The valves spring areis rated protected 400 psig from / 27,6 the elements bar WOG. and tampering. All seats and sealsuseEasemetalof Serviceback-up–sealsServiceablefor extendedwithoutfireremovalresistance.from theThepipeline.valves arePartsrated 400thatpsigwear/are27,6externalbar WOG.and can be changed out in a matter ofminutes. Ease of Service The packing – Serviceable can be changed without with removal the valve from the in-line. pipeline.Parts that wear are external and can be changed out in a matter ofminutes. The packing can be changed with the valve in-line.N550 SERIES ACCESSORIESCable Release – Standard valves are fi tted with a releasemechanism for cable attachment. A cable connected to the wireCable loop allows Release closure – Standard from a safe valves remote are fi location, tted with such a releasethe bulkmechanism plant entrance. for cable attachment. A cable connected to the wireloopWhileallowsthe ordinaryclosurecablefrom acansafeberemoteused, thelocation,Type P164Bsuch asreleasethe bulkplantassemblyentrance.is available. This assembly uses 50 feet / 15 m ofWhile cable housing the ordinary which cable does can not be require used, elaborate the Type P164B guiding release likeassembly uncovered is cables. available. This assembly uses 50 feet / 15 m ofcablePneumatichousingOperationwhich does– Remotenot requirepneumaticelaborateclosureguidingis availablelikeuncoveredwith Type P327Dcables.release. depending upon valve inlet pressure,Pneumatic a minimum supply Operation pressure – Remote of 30 pneumatic to 70 psig / closure 2,1 to 4,8 is available bar on thewith Type Type P327d P327D allows release. the valve depending to be latched upon in valve the open inlet position pressure, witha manual minimum closure supply possible pressure at the of 30 valve. to 70 loss psig of / 2,1 supply to 4,8 pressure bar on the toType the cylinder P327d permits allows the valve eSV to close. be latched Air, nitrogen, in the open or CO position 2can with bemanual used for closure the cylinder possible supply at the source. valve. Maximum loss of supply inlet pressure to to thethe cylinder cylinder is 125 permits psig / the 8,6 eSV bar. to Operating close. Air, Temperature nitrogen, or Range CO 2can = -40° beused to 212°F for the / -40° cylinder to 100°C. supply source. Maximum inlet pressure to thecylinderType P539Ais 125pneumaticpsig / 8,6actuatorbar. OperatingpermitsTemperatureopening andRangeclosing= -40°toFisher212°F ® brand/ -40°N550to 100°C.Series Snappy joe TM emergency shutoff valves(eSVs) Type P539A both pneumatic the valve actuator with the permits use of a opening pneumatic and 4-way closing valveand Fisher from ® brand a remote N550 location. Series Snappy The actuator joe TM emergency opens the valve shutoff when valves(eSVs) pressure both is applied. at the valve Minimum with the pressure use of is a pneumatic 20 psig / 1,4 4-way bar and valveand maximum from a pressure remote location. is 30 psig The / 2,1 actuator bar. opens the valve whenpressureUpon lossisofapplied.pressure,Minimumthe N550pressureSeries closes,is 20 psigassisted/ 1,4 barby theandmaximumspring in thepressurepneumaticis 30actuator.psig / 2,1 bar.UponFisherlossbrandofmakespressure,availablethe N550a smallSeries3-waycloses,controlassistedvalveby thespring(T1139599012)in the pneumaticfor pneumaticactuator.eSV installation. This control valve canFisher be used brand as primary makes control available (open a small or close 3-way the control eSV) or valve an auxiliary(T1139599012) remote release (close for pneumatic only). eSV installation. This control valve canbePlacingusedtheas primaryvalve’s buttoncontrolin(openthe upwardor closepositionthe eSV)permitsor anpressureauxiliarytoremotethe cylinder.releasePushing(closetheonly).button down exhausts pressure to close allPlacing valves connected the valve’s to button the system. in the upward position permits pressure tothe cylinder. Pushing the button down exhausts pressure to close allvalves connected to the system.P134 FUSIBLE LINKP551 AND P551AExternal Closing Spring. Can be installedon an N550 to increase closing force.P327DFor pneumatic remote shutoff of N550valves. Air supply of 20 to 70 psig keepsvalves open. The valve will close byair shutoff, by bleed, or by line rupture.Numerous valves may be in one line.Replaces standard T12979 Latch BlockAssembly that is manually operated.AIR TUBING IS NOT INCLUDED IN KIT.- 36 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

emergenCy shutoFF ValVesEmergency Shutoff ValvesFLOW IN GPM / l/min PROPANETYPE NUMBERBODY SIZE, INCHESACCESSORIES1 psid / 69 mbar d 2 psid / 0,14 bar dN550-10 1-1/4 FNPT 50 / 189 75 / 284N550-16 2 FNPT 75 / 284 115 / 435N550-24 3 FNPT 195 / 738 275 / 1041Type P164B Cable ReleaseType P327d Pneumatic ReleaseType P539A Pneumatic ActuatorT1139599012 Control ValveTYPE N550 CAPACITY CURVE25/ 1,72VALVE DIFFERENTIAL PRESSURE, psid / bar d20/ 1,3815/ 1,0310/ 0,695/ 0,350100/ 379200/ 757300/ 1136400/ 1514500/ 1893600/ 2271700/ 2650800/ 3028900/ 34071000/ 3785FLOW, GPM / l/min PROPANETYPE N550-10 WITH P539A ACTUATORTYPE N550-10 WITH MANUAL LEVERTYPE N550-16 WITH P539A ACTUATORTYPE N550-16 WITH MANUAL LEVERTYPE N550-24 WITH P539A ACTUATORTYPE N550-24 WITH MANUAL LEVERCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 37 -

emergenCy shutoFF ValVesMAINPOPPETEXCESS FLOWSPRINGQUICKDISCONNECTNIPPLEINTERNALTHREADNIPPLEHARDENED STAINLESSSTEEL PIPE THREADSWRENCHINGHEXFUSE PLUGPILOTVALVESEATDISCPISTONTYPE N562Snappy Joe TM Emergency Shutoff Valves forRailroad Tank CarsSnappy Joe TM Type N562 emergency Shutoff Valves (eSVs) aredesigned for railcar protection and attached to the shutoff valves onrailroad tank cars (refer to installation drawing). Typically threeType N562s are used – two on the liquid lines and one on the vaporline. NFPA 58 regulations call for eSV protection on both sides ofthe transfer hose or piping.Pneumatically operated, the valve is opened and closed by meansof a standard quick-disconnect coupling (furnished). Approximately20 to 60 psig / 1,4 to 4,1 bar is needed to open the valve, dependingupon tank car pressure.Remote closure from one or more points, such as the unloadingriser, is accomplished by exhausting pressure from the valve’s pistonchamber with a pneumatic control valve.Application Flexibility/Field Serviceability – The Type N562 has a2-inch NPT female coupling. Nipple lengths attached to the 2-inch NPTcoupling are field selectable based on specific application requirements(i.e. the size of the tank dome opening). These field-installed nipplescan be easily secured and replaced.Wrenching Hex – A wrenching hex is built into the body and nipplepreventing wear or damage when connecting or disconnecting. A1/4-inch FNPT opening in the hex portion can be used to install ableed valve.G200 SERIESBACK CHECKVALVESPNEUMATICCONTROLVALVETYPE N550 ESVPNEUMATICCLOSUREPNEUMATICTUBING TOPRESSURESOURCEAT REMOTELOCATIONUNLOADINGRISERTYPE N562 ESVVAPORHOSETANK CARDOMELIQUID HOSETANK CARSHUTOFF VALVESHardened Threads – The 2-inch FNPT threads on the nipple portionare of hardened stainless steel to reduce wear from repeated use.Excess Flow Valve – With a poppet design similar to internal valveseries, an excess fl ow spring is available. The spring has a closingfl ow of 200 GPM / 757 l/min propane at 13 psid / 0,90 bar d.Dual Service – With all internal parts either stainless steel or platedsteel, the valve can be used on anhydrous ammonia (NH 3) service aswell as LP-Gas.TYPENUMBERType N562 Emergency Shutoff ValvesSHUTOFF VALVECONNECTION, INCHESHOSE CONNECTION,INCHESN562-16 2 FNPT 2 FNPTN562-18 2 FNPT 2-1/4 Male AcmeN562-26 2 FNPT 3-1/4 Male Acme- 38 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

exCess FloW ValVesTYPE F138 F100 SERIES TYPE F130 TYPE F134 TYPE F190excess fl ow check valves are intended to close upon excessivedischarge of vapor or liquid resulting from a break in the hoseor piping system. They are used to protect cylinder, tank andpiping systems, and are available in a large variety of sizes andbody confi gurations.When fl ow exceeds the valve’s setting, the valve closes and remainsclosed until the system equalizes. A built-in equalizing passageautomatically opens the valve once pressure on both sides of thepoppet is equal. Valves larger than 1/2-inch NPT have a drill sizeNo. 60. Valves with a 1/2-inch NPT and smaller have a limitedbypass to comply with NFPA 58.! WARNINGA break or leak downstream of an excess flow valve, that doesnot allow a flow equal to the valve flow rating, will not actuatethe valve and could cause a hazardous condition. For thisreason, system operators should be familiar with the shutoffvalves in the system so that necessary precautions can be takenin an emergency.Care must be taken to be sure the valve’s closing rate is less thanthe capacity of the LP-Gas or anhydrous ammonia (NH 3) systemin which the valve is installed. Brass valves are not suitable foranhydrous ammonia (NH 3) applications.See the WARNINg on page 53, if these excess flow valves are tobe used on DOT Cargo Tanks.INLETTYPENUMBER MATERIAL APPLICATION CONNECTION,INCHESExcess Flow Check ValvesOUTLETCONNECTION,INCHESUL RATED CLOSING FLOW, PROPANE(HORIZONTAL POSITION)LiquidGPM / l/minVapor SCFH / SCMH25 psig/ 1,7 bar Inlet100 psig/ 6,9 bar InletDIFFERENTIALPRESSURE,psid / bar dF138 Brass1/4 MNPT 1/4 FNPT 1.8 / 6,8 377 / 10,7 641 / 18,2 1.4 / 0,097In-LineF202 Brass Male POl 1/2 SAe Flare 1.9 / 7,2 634 / 17,9 1100 / 31,1 2.6 / 0,18F170 Brass6.6 / 25,0 1184 / 33,5 2012 / 57,0 1.2 / 0,08F100 Brass 3/4 MNPT 3/4 FNPT 8.4 / 31,8 2010 / 56,9 3417 / 96,8 2.4 / 0,17F101 Brass Tanks20 / 76,0 3459 / 97,9 5880 / 167 8.5 / 0,59F102 Brass (Full or33 / 125 6300 / 178 10 630 / 301 10.7 / 0,74Half Coupling)1-1/4 MNPT 1-1/4 FNPTF105 Brass 55 / 208 9982 / 283 16 967 / 480 10.7 / 0,74F106 Brass85 / 322 18 513 / 524 31 467 / 891 2.6 / 0,182 MNPT 2 FNPTF107 Brass 100 / 379 20 796 / 589 35 349 / 1001 3.6 / 0,25F130 Brass1 FNPT 1 FNPT 25 / 94,6 5287 / 150 8986 / 254 3.3 / 0,23F131 Brass 1-1/2 FNPT 1-1/2 FNPT 60 / 227 11 694 / 331 19 877 / 563 4.7 / 0,32In-LineF132 Brass96 / 363 19 874 / 563 33 877 / 959 2.1 / 0,142 FNPT 2 FNPTF133 Brass 155 / 587 29 202 / 827 49 718 / 1408 4.2 / 0,29F134 Brass Tanks(Full orF135 Brass Half Coupling)1-1/2 MNPT x1 FNPT2-1/2 MNPT x1-1/2 FNPT1 FNPT 28 / 106 5181 / 147 8806 / 249 2.7 / 0,191-1/2 FNPT 60 / 227 12 000 / 340 20 290 / 575 5.2 / 0,35F190 Steel2 MNPT x 80 / 303 15 400 / 436 26 250 / 743 3.7 / 0,262 MNPTF191 Steel 1-1/4 FNPT 105 / 397 18 800 / 532 32 000 / 906 8.9 / 0,61F194 SteelTanks (1)165 / 625 32 800 / 929 55 950 / 1584 3.1 / 0,21(Full or 3 MNPT 2 MNPTF195 SteelHalf Coupling)260 / 984 50 650 / 1434 86 350 / 2445 6.9 / 0,48F198 Steel3 MNPT x 165 / 625 33 000 / 934 56 250 / 1593 3.1 / 0,213 MNPTF199 Steel 2 FNPT 260 / 984 49 500 / 1402 84 350 / 2389 7.1 / 0,491. lP-Gas or NH 3service.WORKINGPRESSURE,psig / bar250/ 17,2CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 39 -

INTERNAL RELIEF VALVESFlush Mounted Internal Relief ValvesPrimarily for trucks transporting LP-Gas, anhydrous ammonia (NH 3)or other compressed gases. Types H722 and H732 stainless steelrelief valves resist rust and corrosion. Stainless steel makes it easyto remove the valve from the tank for periodic testing (as prescribedby DOT), and permits standard tank couplings instead of the morecostly fl anged tank openings. Field-Repairable valve seats allow forseat replacement without affecting relief setpoint.Tight fitting protective caps (Types P297 and P298) are standard onthe valve to ensure no debris blocks the valve discharge. Standardsetpoints listed with UL and approved by ASME include 125, 156,TYPE H722 OR H732250, 265, 275, and 312 psig / 8,6; 10, 8; 17,2; 18,3; 19,0; and21,5 bar. Special setpoints are available from 100 to 400 psig / 6,9 to27,6 bar with ASME approvals. The flow area is 1.39 square inchesfor the Type H722 and 3.20 square inches for the Type H732.A 1-1/2 and 2-1/2-inch hex size (Type P304 or P305) wrench can beinserted into the valve socket when installing/removing the valve toprovide a means of attaching a standard wrench.TYPENUMBERCONTAINERCONNECTION,INCHESFlush Mounted Internal Relief ValvesSTART-TO-DISCHARGESETTING, psig / barFLOW CAPACITY,SCFM / SCMH AIRULASMEFOR TANK WITH AREAUP TO (3) :Ft 2 / m 2H722-250H722-265 2 MNPT (1) 250 / 17,2265 / 18,33660 / 62183555 / 60423024 / 51363387 / 5753171 / 15,9166 / 15,4H722-275 275 / 19,0 3714 / 6310 3509 / 5960 175 / 16,3H732-250250 / 17,2 10 508 / 17 853 8827 / 14 997 624 / 58,0H832N-3 3 MNPT (2) 265 / 18,3 11 220 / 19 063 9332 / 15 855 676 / 62,8H732-275 275 / 19,0 11 736 / 19 940 9669 / 16 428 714 / 66,31. Order Type P304 (1-1/2-inch hex bar) installation wrench.2. Order Type P305 (2-1/2-inch hex bar) installation wrench.3. Based on UL fl ow capacities.PROTECTIVE CAP(INCLUDED)Type P297Type P298Large Relief ValvesTypes H282 and H5112 internal spring relief valves can be used in theCombo Joe TM relief valve manifold or as separate units on stationarytanks. The valves are identical except for valve body materials –Type H282 of brass (LP-Gas service) and Type H5112 of 430 stainlesssteel (anhydrous ammonia (NH 3) or LP-Gas service). Flow area is3.20 square inches.When used in ASME tanks, internal spring relief valves have only thepoppet and part of the body outside the tank. The adjusting screwand all other parts are inside the tank, safe from tampering. Field-Repairable valve seats allow for seat replacement without affectingrelief setpoint. Standard setpoints listed with UL and approved byTYPE H282 OR H5112ASME includes 125, 156, 225, 250, 265, 275, and 312 psig / 8,6;10,8; 15,5; 17,2; 18,3; 19,0; and 21,5 bar. Special setpoints areavailable 100 to 400 psig / 6,9 to 27,6 bar with ASME approvals.The drain defl ector is furnished as standard on both the Types H282and H5112. Type P104-24 pipeaway adaptor (3-inch FNPT) isavailable for use with either valve. A 3-1/2 inch wrench can be usedwhen installing or removing the valve.TYPENUMBER (2)CONTAINERCONNECTION,INCHESSERVICECONSTRUCTIONMATERIALLarge Relief ValvesSTART-TO-DISCHARGESETTING, psig / barFLOW CAPACITY,SCFM / SCMH AIRULASMEFOR TANK WITHAREA UP TO (1) :Ft 2 / m 2H282-250250 / 17,2 11 050 / 18 774 9724 / 16 521 664 / 61,7LP-GasBrassH282-275 275 / 19,0 12 220 / 20 763 10 651 / 18 096 750 / 69,7H5112-250 2 MNPT250 / 17,2 11 050 / 18 774 9724 / 16 521 664 / 61,7H5112-265 NH 3or LP-GasStainlessSteel265 / 18,3 11 814 / 20 072 10 280 / 17 466 719 / 66,8H5112-275 275 / 19,0 12 220 / 20 763 10 651 / 18 096 750 / 69,71. Based on UL fl ow capacities.2. Use with a 3.5-inch hex size installation tool.- 40 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

external relIeF ValVesTYPE H100 TYPE P206TYPE P174 TYPE H185External Relief ValvesUsed on ASMe and dOT containers, all working parts of thesevalves are outside the container connection so they must beprotected against mechanical damage.The external relief valves use Brass as material of construction.Protective caps are shipped with Fisher TM brand external reliefvalves. Replacement caps may be ordered separately (refer below).TYPE NUMBER (2)CONTAINERTYPESTART-TO-DISCHARGESETTINGS, psig / barSmall External Relief ValvesCONTAINERCONNECTION,INCHESFLOW CAPACITY,ACCESSORY TYPE NUMBERSSCFM / SCMH AIRUL Pipeaway Adaptor Protective CapH110-2501/4 MNPT 310 / 527 - - - - P206250 / 17,2H185-250 3/4 MNPT 2223 / 3777 - - - - P145ASMeH185-275 275 / 19,0 3/4 MNPT 2456 / 4173 - - - - P143H110-312 312 / 21,5 1/4 MNPT 390 / 663 - - - - P206H148H173dOT orHydrostatic Relief375 / 25,91/2 MNPT3/4 MNPT903 / 1534 (1) P174(1/2-inch FNPT)P206H1231/4 MNPTH120-120 120 / 8,3 1/4 MNPTH124Hydrostatic Relief1/4 MNPT- - - - - - - - P206H144H174450 / 31,01/2 MNPT3/4 MNPT1. dOT cylinder water capacity 500 pounds / 227 kg, approved by Bureau of explosives and CGA.2. Replacement valves for the Types H135 and H160 will be available in Spring 2011, if we do not provide you with detailed information for Ul approved Types H125 and H150 reliefvalves. Please contact your Fisher lP-Gas equipment distributor.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 41 -

gloBe and angle ValVesTYPE N310GLOBE VALVETYPE N310-24GLOBE VALVETYPE N410-24ANGLE VALVETYPE N450ANGLE VALVEGlobe and angle valves are widely used at bulk plants to control gasfl ow in the piping system, at storage tanks, on trucks, and at pumpsor compressors. Their body confi guration permits installation in astraight section of pipe (globe body) or where it is desired to make achange in piping direction (angle body).All units have a 1/4-inch FNPT plugged boss in the downstream sideof the body. A hydrostatic relief valve (Type H124) or a vent valve(Type j402S) can be installed in this outlet.Heavy-duty ductile iron (dI A395) valves for either lP-Gas or NH 3service. Ranging in size from 1/2 to 3-inch / dN 15 to 80, eachvalve has spring loaded PTFe chevron packing for an effective sealagainst leakage. The valves are rated for 400 psig / 27,6 bar WOGand a maximum temperature of 150°F / 66°C.Valve disc rotation stops as soon as the disc contacts the bodyseat to help minimize disc wear. Oversize ports in all units givehigh fl ow capacity.Types N310 and N410 – Heavy-duty ductile iron valves for eitherlP-Gas or Anhydrous Ammonia (NH 3) service. Ranging in sizefrom 1/2 to 3-inch / dN 15 to 80 each valve has spring loaded PTFechevron packing for sealing against leakage. Ball bearing valve discconstruction on 1-1/4-inch / dN 32 and larger sizes, gives a strongconnection to the stem to protect the disc under back-flow conditions.Types N350 and N450 – economy globe and angle valves forlP-Gas service. With many of the construction features of theTypes N310 and N410, these valves can be supplied in 1/2 and3/4-inch / dN 15 to 80 sizes. PTFe spring-loaded packing providesan effective seal against leakage within the valve’s pressure range.SERVICEINLET AND OUTLETCONNECTIONS,INCHES / DNGlobe and Angle ValvesHeavy-Duty VersionTYPE NUMBEREconomy VersionGlobe Angle Globe GlobeLP-Gas and NH 31-1/2 FNPT N310-12 N410-12 - - - - - - - -1/2 FNPT N301-04 N401-04 - - - - - - - -3/4 FNPT N301-06 N401-06 - - - - - - - -1 FNPT N301-08 N401-08 - - - - - - - -1-1/4 FNPT N310-10 N410-10 - - - - - - - -LP-Gas2 FNPT N310-16 N410-16 - - - - - - - -3 FNPT N310-24 N410-24 - - - - - - - -3 / 80 ASMe Flange N310F-24 N410F-24 - - - - - - - -1/2 FNPT - - - - - - - - N350-04 N450-043/4 FNPT - - - - - - - - N350-06 N450-06- 42 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

BaCK CheCK ValVesG100 SERIES TYPE G105 TYPE G201Back check valves allow fl ow in only one direction and are normallyclosed. They are installed in liquid fi lling connections on stationarystorage tanks, bobtail delivery trucks and liquid transfer lines.G100 SeriesG100 Series – used mainly in tank inlet connections, are offered intwo styles of seat construction: metal-to-metal or soft seat. The softseated construction is for the filling connection on bobtail deliverytrucks. Because the valve gives tight shutoff, piping on the bobtailcan be depressurized for maintenance or repair without leakage.The G100 Series has a 250 psi / 17,2 bar rating and bubbles at0.25 psid / 17 mbar d.Type G109 – was designed for in-line service at bulk plants withFNPT connections for easy installations.G200 SeriesG200 Series – back check valves are specifi cally intended forheavy-duty in-line service at the bulk plant’s transfer area. Thevalves are suitable for lP-Gas or Anhydrous Ammonia (NH 3) service.Flow moves the spring loaded poppet to the open position as soonas pressure differential is created. When fl ow stops, the poppetcloses. A soft seat construction gives tight shutoff so that piping canbe blown down for maintenance.With a body designed to reduce fl ow resistance, flow capacity ishigh. The 2-inch / dN 50 body size gives 350 GPM / 1325 l/minlP-Gas at 10 psig / 0,69 bar differential pressure.The G200 Series is built to stay on the job with all internal parts ofplated steel or stainless steel.Type G201 – has a built-in fl ow indicator mechanism, (seeillustration), which can be used to replace sight fl ow indicators.SpecificationsTypes G200 and G201Pressure Rating: 400 psig / 28 bar WOGBody: ductile ironInternal Parts: Plated steel or stainless steelSeat Disc: Synthetic rubber with metal-to-metal backupSEATCONSTRUCTIONMetal-to-MetalSoft SeatCONTAINER ORINLET CONNECTION,INCHESOUTLETCONNECTION,INCHESBack Check ValvesPROPANE FLOWCAPACITY AT 10 psig / 0,69 barDIFFERENTIAL PRESSURE,GPM / l/minBrassTYPE NUMBERDuctile IronSteel No Flow FlowIndicator Indicator3/4 MNPT 3/4 FNPT 21 / 79,5 G100 - - - - - - - - - - - -1-1/4 MNPT 1-1/4 FNPT 55 / 208 G101 - - - - - - - - - - - -2 MNPT 2 FNPT 150 / 568 G102 G112 - - - - - - - -2 FNPT 2 FNPT 150 / 568 G109 - - - - - - - - - - - -3 MNPT 3 FNPT 250 / 946 - - - - G104 - - - - - - - -1-1/4 FNPT 1-1/4 FNPT 190 / 719 - - - - - - - - G200-10 G201-102 FNPT 2 FNPT 350 / 1325 - - - - - - - - G200-16 G201-162 MNPT2 MNPT and1-1/4 FNPT137.5 / 520 - - - - G105 - - - - - - - -3 FNPT 3 FNPT 800 / 3028 - - - - - - - - G200-24 G201-243 FNPT 2 MNPT 254 / 961 - - - - G106 - - - - - - - -3 MNPT 3 MNPT and 2 MNPT 254 / 961 - - - - G107 - - - - - - - -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 43 -

hose end, FIller, and lIQuId transFer ValVesHose End ValvesType N480 – hose end valves are intended for quick opening andclosing during bobtail truck deliveries of lP-Gas or AnhydrousAmmonia (NH 3). The unique design prevents opening unlessattached to a 1-3/4-inch ACMe filler valve at the tank. The 45° anglebody confi guration with 1-inch NPT inlet gives maximum handlingease during the transfer operation.TYPE N480For increased safety, the Type N480 is designed to stay closedunless connected even with the operating lever in the open position.This prevents accidental opening during hose reel-up or at othertimes. The fl uted coupler permits quick attachment to the fi ller valveand the operating lever is easy to reach for opening or closing.Type M570 – filler hose adaptor, included with the Type N480, permitsthe hose end valve to be removed from filler valves that fail to close.Type N481 – hose end valves without the Type M570 filler hoseadaptor can be supplied for Anhydrous Ammonia (NH 3) applications.Caution: Other brands of filler hose adaptors should not beused with the Type N480 because they could allow accidentalopening of the valve while it is being handled.Large Filler ValvesTYPE D140 OR D141TYPE D138 OR D139Regulator Technologies offers large filler valves with heavy-dutyconstruction throughout for rapid fi lling of ASMe tanks or trucks.Thick-walled bodies, formed seat retainers and generous wrenchingfl ats minimize damage to internal parts. The flow channel designoffers low resistance-to-fl ow for increased pump and hose service.Types D138 and D139 – offer single back check valves for usewith either a supplementary G Series back check valve or a manualshutoff valve.Types D140 and D141 – provide a two-piece design with both anupper and lower back check. The bubble tight upper back checkhas a resilient seat for maximum service life. A metal-to-metal lowerback check protects against loss of product in case of an accidentand permits removal of the upper body with the tank under pressure.TYPENUMBERCONNECTIONSCONTAINER MNPTx LINE ACMELarge Filler ValvesBACKCHECKSTYLEFILLING CAPACITYGPM / l/min PROPANEAT 10 PSI / 0,69 barDIFFERENTIALd138Single 105 / 3972 x 2-1/4-inchd140 double 100 / 379d139Single 275 / 10413 x 3-1/4-inchD141 double 225 / 852Liquid Transfer ValvesThe Type N456 attaches to a liquid withdrawal valve or similarconstructions. The withdrawal valve is activated by means of aspecial adaptor on the Type N456 that opens the valve the correctdistance to permit liquid transfer from the customer tank to thestorage tank.Type N456 – Special 3/4-inch MNPT inlet x 1-3/4-inch male ACMeoutlet. Consists of a Type N450-06 angle valve, a Type M455 inletadaptor, a Type M215 outlet adaptor, and a cap and chain to keepdirt from entering the valve when it is not in use.Type M455 – Special 3/4-inch MNPT inlet x 3/4-inch MNPT outlet.Opens the tank’s liquid withdrawal valve the correct distance topermit transfer operations. A nylon gasket is supplied for a tight sealwith the withdrawal valve.Types N456 and M455 should be used with Types F171* and F210*liquid Withdrawal Valves.TYPE M455TYPE N456*Types F171 and F210 valves are obsolete Fisher ® products. Kindly contact your lP-Gas equipment distributor.- 44 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

ByPass and BaCKPressure ValVesBypass Valves for Large Pumpsdesigned for bypass on 2 to 4-inch size pumps, the N100 Seriesis widely used on both lP-Gas and Anhydrous Ammonia (NH 3)applications. The throttling action of the N100 Series allows onlysurplus pump discharge to be returned to the tank.A venturi flow passage gives a boost effect, permitting a greater valveopening for increased flow at the lower pressure build-ups whenbypassing full pump output. These features help to give rapid, stableliquid transfer and reduce dangerous pressure pulsations. The valvescontain only one moving part - the piston style inner valve.An external sensing line is not required because tank pressure registersthrough a hole in the inner valve. Complete field servicing can be madewithout removing the valve from the piping.All N100 Series bodies have a 1/4-inch FNPT tapped and pluggedboss on the side inlet for either a pressure gauge or a hydrostaticrelief valve.N100 SERIESLarge Pump Bypass ValvesTYPE NUMBER PUMP SIZE, INCHES BODY SIZE, INCHES PSID SETTING, psig / bar PSID RANGE, psig / barN100A-08-1 (1) 2 1 FNPT50 / 3,4 25 to 75 / 1,7 to 5,2N100A-08-2 (1) 115 / 7,9 50 to 150 / 3,4 to 10,3N100A-10-1 (1) 50 / 3,4 25 to 75 / 1,7 to 5,21-1/4 FNPTN100A-10-2 (1) 2 or 3115 / 7,9 50 to 150 / 3,4 to 10,3N100A-12-1 (1)50 / 3,4 25 to 75 / 1,7 to 5,21-1/2 FNPTN100A-12-2 (1) 115 / 7,9 50 to 150 / 3,4 to 10,3N100-16-12 FNPT 50 / 3,4 25 to 75 / 1,7 to 5,2N100-16-2 2 FNPT 115 / 7,9 50 to 150 / 3,4 to 10,34N100-20-150 / 3,4 25 to 75 / 1,7 to 5,22-1/2 FNPTN100-20-2 115 / 7,9 50 to 150 / 3,4 to 10,31. Only the N100A’s are Ul listed.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 45 -

ByPass and BaCKPressure ValVesBypass Valves for Small PumpsN110 Series – is intended for bypass service on the smaller pumps(5 to 40 GPM / 18,9 to 151 l/min) used on stationary tanks ordelivery trucks. Suitable for lP-Gas or Anhydrous Ammonia (NH 3)installations, the valve has an internal sensing orifi ce and does notrequire an external sensing line. A vent opening of the sensingorifi ce channel allows trapped vapor to escape, eliminating anyvapor in the system when the pump is started. The compact sizeof the N110 Series (less than 6.5-inches / 165 mm overall) permitsinstallation in limited space. A 1/4-inch FNPT tapped and pluggedboss on the inlet side of the body can be used to install a hydrostaticrelief valve or a pressure gauge. The valve does not have to beremoved from the line for servicing; all internal parts can be reachedby unscrewing the union nut.N110 SERIESTYPE NUMBERPUMPING CAPACITY,GPM / l/minSmall Pump Bypass ValvesBODY SIZE, INCHES PSID SETTING, psig / bar PSID RANGE, psig / barN110-06-1 5 to 20 / 18,9 to 75,7 3/4 FNPTN110-08-1 20 to 40 / 75,7 to 151 1 FNPTN110-06-2 5 to 20 / 18,9 to 75,7 3/4 FNPTN110-08-2 20 to 40 / 75,7 to 151 1 FNPT50 / 3,4 25 to 75 / 1,7 to 5,2100 / 6,9 75 to 150 / 5,2 to 10,3Backpressure ValvesThese valves are soft seated, holding a differential backpressure onliquid meters. A N120 Series backpressure valve is installed after themeter, and it holds backpressure on the meter until vapor is forcedback to the tank through the vapor eliminator. In this way vaporcannot form within the meter during liquid delivery.Intended for smaller pumps, N120 Series are ideal on suchapplications as cylinder fi lling installations. All units have a 1/4-inchFNPT tapped and plugged boss on the inlet side of body and can beused for both lP-Gas and Anhydrous Ammonia (NH 3) service. TheN120 Series has a 1/4-inch FNPT connection in the closing cap forattachment of an external sensing line from the tank vapor space orvapor eliminator.N120 SERIESTYPE NUMBERLIQUID METER SIZE,INCHESBackpressure ValvesBODY SIZE, INCHES PSID SETTING, psig / bar PSID RANGE, psig / barN120-06-3N120-08-33/4 or 13/4 FNPT1 FNPT12 / 0,83 10 to 20 / 0,69 to 1,4- 46 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Rotary GaugesLENGTH,INCHES / mmLPG DIAL>1200GALLONLPG DIAL≤1200GALLONNH 3DIAL>1200GALLONNO DIAL>1200GALLON68/ 1727Type J31L-1 Type J31S-1 Type J31A-1 Type J31X-1Rotary GaugesJ31 SERIES69 to 92/ 1753 to 233793 to 108/ 2362 to 2743109 to 140/ 2769 to 3556Type J31L-2 Type J31S-2 Type J31A-2 Type J31X-2Type J31L-3 Type J31S-3 Type J31A-3 Type J31X-3Type J31L-3L Type J31S-3L Type J31A-3L Type J31X-3LDial Only Type P323 Type P322 Type P324 - - - -Fisher ® brand rotary gauges can be used on stationary or mobiletanks to visually indicate the amount of LP-Gas or AnhydrousAmmonia (NH 3) in the container. They are also used in fi lling thetank to the proper liquid level. On mobile applications and somelarge stationary storage tanks, hangers are recommended to supportthe horizontal length of the dip tube.The gauge is operated by opening the small bleed orifi ce when thetube is in the vapor space of the tank. Moving the pointer on thedial causes the end of the tube to move until it contacts liquid inthe container. At that point, discharge from the bleed orifi ce turnsfrom vapor to liquid and the rotary gauge dial gives the volumepercentage of liquid in the tank.J31 Series – consists of heavy duty gauges that minimize vibrationeffects (swaying, bouncing) by a long (68-inches / 1,73 meters)stem tube extension. Gauges fit 1-inch / 25,4 mm couplingcontainer connections.All gauges have stem and dip tubes with an extra large inside diameter.This assures that the correct liquid level can be obtained quickly.A nylon packing sleeve and a friction ring for the pointer indicatorgives smooth rotation and long service life. Steel and stainless steelmaterials resist rust or corrosion.TYPE M570Filler Hose AdaptorIntended for the outlet of a bobtail truck filling hose, theType M570 enables the filling hose to be removed if thefiller valve fails to close. An integral back check in theadaptor prevents gas from escaping in the event of afailure of the filler valve. The filler valve should berepaired as soon as possible and the Type M570removed from the filler valve.TYPE NUMBERFiller Hose AdaptorFILLER VALVECONNECTION,INCHESHOSE END VALVECONNECTION,INCHESBODYMATERIALM570 1-3/4 Female ACME 1-3/4 Male ACME BrassTYPE P520LAdjustable Orifice ReamerUse Type P520L to enlarge orifi ces on LP-Gasappliances ranging from drill size no. 80 to 50.Cylinder Filling ValveType N201 – fi lls DOT cylinders by weight andstops the gas supply when specifi ed fi ll weight isreached. Operated by air pressure, it is designedfor beam type scales and requires no electrical ormechanical power.The assembly comes completely piped up andincludes special parts that allow the slide weight onthe scale to move to zero. A red button appears inthe indicator on top of the Type N201 each time acylinder is filled to the desired weight.TYPE N201CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 47 -

Turbo-Flo LE Transfer SystemME825-16with KnobUp to 55% increasedflow when entire systemis installed compared toa standard globe valvesystemME806-16ME868-16The Turbo-Flo LE (Low Emission) Transfer System is the industries most efficient and cost-effective way to transfer LP-Gasin bobtail, transport, railcar, and bulk plant applications. This product will pay for itself through gas savings during disconnect andits increased flow rate. While any part of this system is interchangeable with other standard systems, to receive maximum savings,all three products (LE Transfer Valve, LE Acme Adapter, and MEC Globe Valve) must be used simultaneously.Heavy duty spring loaded safetylatch prevents accidental openingof valveHardened steel bearing race withstainless steel ball bearings formaximum product lifeTransfer System Features• Minimum $350 $avings per 1,000 fills• Reduces product emissions by 99.6%over standard valves• 100% compatible with existing Acmetransfer connections• All stainless steel internal components• Convenient carrying handles and customfit dust plug with lanyard (not shown)Cam operated equalization featurePilot orifice allows the valve to equalizefor smooth valve operation.and open only when the valve is attached* Rated for LP-Gas & NH 3Protected hydrostaticrelief valveto the mating part. When the valve is notattached to the mating part, the valvecannot equalize and will not open.Turbo-Flo LE Transfer ValvePart No.Inlet Outlet Discharge at(FNPT) (F. Acme) DisconnectMaterialME806-16 2” 3-1/4” .09 CCDuctile/BrassME806S-16* 2” 3-1/4” .09 CCDuctile/ME806-16SteelPatent Pending- 48 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Turbo-Flo LE Transfer SystemTurbo-Flo LE Acme AdaptersPart No.Inlet(M. Acme)Outlet(MNPT)FactoryInstalledScreenDischargeatDisconnectMaterialMechanicalBrakeInterlockRetro-FitAccessoriesElectronicProximityInterlockKitBackCheckTestAdapterME866-8 1-3/4” 1” No .16 CC Brass — — —ME866A-8 1-3/4” 1” Yes .16 CC Brass — — —ME866-10 1-3/4” 1-1/4” No .16 CC Brass — — —ME866A-10 1-3/4” 1-1/4” Yes .16 CC Brass — — —ME867-10 2-1/4” 1-1/4” No 1.96 CC Brass — — —ME867A-10 2-1/4” 1-1/4” Yes 1.96 CC Brass — — —ME868-16* 3-1/4” 2” No 3.11 CC Brass ME868MIB ME868PIB MEP105ME868A-16* 3-1/4” 2” Yes 3.11 CC Brass ME868MIB ME868PIB MEP105ME868-24* 3-1/4” 3” No 3.11 CC Brass ME868MIB ME868PIB MEP105ME868A-24* 3-1/4” 3” Yes 3.11 CC Brass ME868MIB ME868PIB MEP105* Not for use in conjunction with soft seat back checkME868-16Patent PendingTo determine paybackand cost savings visitwww.marshallexcelsior.comTurbo - Flo LE Transfer System AccessoriesME868MIBME868-16 & ME441F8not includedME868BLKMEP105ME868PIBPatent PendingME868-16& ME441F8 notincludedME868BLK – “Bypass Line Kit” is used to create a one-way closed loop between the upstream and downstream sides of aMarshall Excelsior 2” globe valve when used in conjunction with a ME868 Series low emission Acme adapter. The kit features abrass one-way check valve and preformed heavy wall copper tubing with brazed end fittings for durability. This product is intendedto prevent over pressurization of the ME868 Series low emission Acme adapters making them truly low emission. This product willalso greatly reduce pressures within the ME868 Series adapters thereby decreasing any wear that may occur to the shutoff valvesor the low emission Acme adapter.ME868MIB – “Mechanical Interlock Bracket” allows for a standard Parker style pneumatic air roller valve normally used inconjunction with standard bobtail brake interlock systems to be retro-fit to the ME868 Series low emission Acme adapters.This bracket system allows the standard brake interlock system and connections to be moved forward to the end of the lowemission adapter where normal contact with the ME441F8 flange Acme cap can occur. The kit includes all bracketing and mountinghardware. (Kit does not include Parker style pneumatic roller valve)ME868PIB – “Proximity Interlock Bracket” uses the new MEC smart interlock technology designed to connect with the Allisonautomatic transmission “auxiliary function range inhibit” preventing operation of the bobtail while this connection is in use. MECsmart interlock technology incorporates a high grade Turck proximity switch that senses the presence of the stainless steel flangeon the ME441F8 Acme cap when secured tightly to the ME868 Series low emission Acme adapter. This kit comes complete withall mounting hardware, MEC smart interlock technology and wiring harness to reach 5’ below the deck of the bobtail.MEP105 – This adapter allows for the periodic evacuation and testing of a bobtail’s internal back check valve during five yearinspection requirements. The adapter fits snuggly into the female Acme side of a ME130 which then can be threaded onto theME868 Series low emission Acme adapter pushing the valve poppet to the open position thereby depressurizing the system fortesting purposes. (Note: Be sure to consult instruction manual supplied with MEP105 test adapter before attempting use.)CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 49 -

High Flow Globe & Angle ValvesME828-16Patent PendingME829E-ZKnobAcme thread toeliminate needfor adapterFor LP-Gas& NH 3Port for upstreamand downstreamME825-16Patent PendingHigh Flow Globe and Angle Valve Features• All stainless steel internal components with rotatingseat disc design & V-cup Teflon ® packing stem seals• Double stem seal design ensures leak free operation• Double lead stem thread ensures quick and efficient operation• Durable ductile iron valve body with automotive grade powder coat finish• 1-1/4” & larger globe valves have 35° seat angle for maximum product flow• 1-1/4” & larger globe valve designed ergonomically correct for bobtailtransport and bulk plant applications• 1-3/4”, 2-1/4” & 3-1/4” Acme threads available on globe valves• Rated for 400 WOG• Operating temperature –40° to +212° FahrenheitME815-16AnglePart No.GlobeInlet(FNPT)OutletSidePort(FNPT)No. ofSidePortsFlangeStyleBonnetE-Z TurnKnobME815-4 ME825-4 1/2” 1/2” FNPT 1/4” 1 No —ME815-6 ME825-6 3/4” 3/4” FNPT 1/4” 1 No —ME815-8 ME825-8 1” 1” FNPT 1/4” 1 No —ME815-10 ME825-10 1-1/4” 1-1/4” FNPT 1/4” 2 Yes ME829—— ME826-10 1-1/4” 1-3/4” M. Acme 1/4” 2 Yes ME829—— ME827-10 1-1/4” 2-1/4” M. Acme 1/4” 2 Yes ME829AccessoriesHydrostaticRelief Valves Vent ValvesMEH225MEH225SSMEH25/450MEJ400MEJ400SCMEJ402SME815-12 ME825-12 1-1/2” 1-1/2” FNPT 1/4” 2 Yes ME829ME815-16 ME825-16 2” 2” FNPT 1/4” 2 Yes ME829—— ME824-16 2” 2” FNPT 1/2” 2 Yes ME829 MEH50/460 ———ME815-24ME828-16ME825-242”3”3-1/4” M. Acme3” FNPT1/4”1/4”22YesYesME829includedMEH225MEH225SSMEH25/450MEJ400MEJ400SCMEJ402STo order Teflon ® or Viton ® Seal add “T” for Teflon ® and “V” for Viton ® after the prefix part numberi.e. ME815T-10 or ME815V-10ME815-6Vent Valve NotIncludedME825-6Vent Valve NotIncludedTeflon ® is a trademark of DuPont Company and Viton ® is a trademark of DuPont Performance Elastomers.- 50 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Next Generation Globe & Angle ValvesThese Next Generation High Flow globe and angle valves have the same great features of the original High Flow MarshallExcelsior globe and angle valves with additional product performance enhancements. These globe and angle valves provide apositive shutoff that is highly reliable with High Flow performance with bidirectional flow or reduced product emissions.Integrated Back Check Feature (IBC) - Designed for use in sections of piping where the trapped liquid pressure may exceed 100psig between two valves. When trapped liquid pressure exceeds 100 psig, the integrated back check feature automatically bypassestrapped downstream system pressure through the valve seat to the upstream side of the valve into the product container or piping.A closed looped system is created because the 100 psig is far below the 400—500 psig set pressure of a hydrostatic relief valvekeeping the product in the system and reducing product emissions.Warning: NFPA 58 requires that a hydrostatic relief valve be installed into any section of piping that could allow liquid to becometrapped between two shutoff valves.Integrated Pilot Feature (P) - Designed for sections of piping that have bidirectional flow. Standard globe and angle valvesinstalled in bidirectional systems can have a potential for back pressure to build-up on the upstream side of a closed valve. Thispressure adds to the force required to open the valve causing additional wear to the valve stem and seat material. The integratedpilot feature allows the first portion of stem travel to unseat the pilot orifice, automatically equalizing the system pressure prior tounseating the valve holder seal. This greatly reduces the opening torque required in bidirectional systems and prevents prematurewear of the primary valve seat material and valve components.IntegratedBack CheckFeature(IBC)IntegratedPilotFeature(P)For LP-Gas& NH 3Up to 70%More FlowUp to 70%More FlowME825IBC-16Patent PendingME825P-16Patent PendingIntegratedBack CheckAnglePilotFeaturePart No.IntegratedBack CheckGlobePilotFeatureInlet(FNPT)OutletSidePort(FNPT)No. ofSidePortsFlangeStyleBonnetE-ZTurnKnobAccessoriesHydrostaticReliefValvesVent ValvesME815IBC-16 ME815P-16 ME825IBC-16 ME825P-16 2” 2” FNPT 1/4” 2 Yes ME829 MEH225— — ME828IBC-16 ME828P-16 2”3-1/4” MaleAcme1/4” 2 Yes ME829MEH225SSMEH25/450MEJ400MEJ400SCMEJ402S— — ME824IBC-16 ME824P-16 2” 2” FNPT 1/2” 2 Yes ME829 MEH50/460 —CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 51 -

High Flow Bypass Valves For Bobtail Truck/ Plant ApplicationsThese bypass valves are specifically designed to protect truck and plant pumps from damage due to excessive pressure whileproviding the industry’s best bypass flow rates across a full range of set pressures. They feature wide open flow channels with anorifice weep hole chamber to prevent the valve from slamming open / closed. The weep hole chamber also helps prevent valve seatchatter by allowing constant pressure communication between both the upstream and downstream side of the seat.ME840-16/125Part No.DescriptionStandardSpring Range*ME840-10-125 1-1/4” FNPT High Flow Bypass Valve 90-125 PSIPart No.ME841-10-125 1-1/4” Socket Weld High Flow Bypass Valve 90-125 PSIME840-12-125 1-1/2” FNPT High Flow Bypass Valve 90-125 PSIME840-10-95ME841-10-95ME840-12-95ME841-12-95ME841-12-125 1-1/2” Socket Weld High Flow Bypass Valve 90-125 PSIME840-16-125 2” FNPT High Flow Bypass Valve 90-125 PSIME840C-16-125 2” FNPT Classic Flow Bypass Valve 90-125 PSIME841-16-125 2” Socket Weld High Flow Bypass Valve 90-125 PSIME840-125 1-1/4” -2” Universal High Flow Bypass w/o Flanges 90-125 PSIME840-16-302" FNPT High Flow Bypass Valve20-40 PSI*Alternate spring ranges available. Please see replacement parts section in back of catalog.ME840-16-55ME840-16-95ME841-16-30ME841-16-55ME841-16-95ME840-24-30ME840-24-95ME840-95Part No.ME840-10FME841-10FME840-12FME841-12FME840-16FME841-16FMEP840-10MEP841-10MEP840-12Description1 1/4" FNPT High Flow Bypass Valve1 1/4" Socket Weld High Flow Bypass Valve1 1/2" FNPT High Flow Bypass Valve1 1/2" Socket Weld High Flow Bypass Valve2" FNPT High Flow Bypass Valve2" FNPT Universal High Flow Flange Bypass Kits Valve2" Socket Weld High Flow Bypass Description Valve2" Socket Weld High Flow Bypass Valve2" Socket Weld High Flow Bypass Valve3" FNPT High Flow Bypass Valve3" FNPT High Flow Bypass Valve1 1/4" - 2" Universal High Flow Bypass Valve w/o Flanges*Alternate spring ranges available.High Flow Bypass Valve FeaturesMEP841-12• All ductile iron body and bonnetMEP840-16• All stainless steel wettedcomponentsMEP841-16• Heavy duty protective stem cap• Wide open flow channels for industry best flow rates• Orifice weep hole to maintain constant pressure above and below valve seat• Large range of set pressure springs• Weldable steel NPT and socket weld flanges• Zinc dichromate finish for maximum corrosion resistance• Available with or without flanges factory assembled• Flanges available 1-1/4” through 2” NPT and socket weld construction• Universal 4 bolt, flanged body configuration• Two 1/4” FNPT plugged auxiliary pressure ports• Factory set at 125 PSI1-1/4” FNPT 4 Bolt Flange Adapter Plate w/ Bolts & O-Ring1-1/4” Socket Weld 4 Bolt Flange Adapter Plate w/ Bolts & O-Ring1-1/2” FNPT 4 Bolt Flange Adapter Plate w/ Bolts & O-Ring1-1/2” Socket Weld 4 Bolt Flange Adapter Plate w/ Bolts & O-Ring2” FNPT 4 Bolt Flange Adapter Plate w/ Bolts & O-Ring2” Socket Weld 4 Bolt Flange Adapter Plate w/ Bolts & O-Ring1-1/4” FNPT 4 Bolt 90° Flange Adapter Elbow w/ Bolts & O-Ring1-1/4” Socket Weld 4 Bolt 90° Flange Adapter Elbow w/ Bolts & O-Ring1-1/2” FNPT 4 Bolt 90° Flange Adapter Elbow w/ Bolts & O-Ring1-1/2” Socket Weld 4 Bolt 90° Flange Adapter Elbow w/ Bolts & O-Ring2” FNPT 4 Bolt 90° Flange Adapter Elbow w/ Bolts & O-Ring2” Socket Weld 4 Bolt 90° Flange Adapter Elbow w/ Bolts & O-RingME840-16-104Standard PoppetStandardSpring Range *90-125 PSI90-125 PSI90-125 PSI90-125 PSI41-70 PSI90-125 PSI20-40 PSI41-70 PSI90-125 PSI20-40 PSI90-125 PSI90-125 PSIME840C-16-104Classic Poppet- 52 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

High Flow Low Emission Hose End ValvesThese hose end valves are leading the industry in minimal product loss duringdisconnect without sacrificing flow. They have instant full-on flow with theadded protection of a quick closing, self-locking handle to prevent accidentalopening of the valve during transport. They are designed to be used at the endof a filling hose on a bobtail, dispensing system or nurse tank.NewHigh FlowModelME800Hose End Valve Features• All stainless steel component construction• Molded on valve main seal• Vents less than .50cc for minimal loss of product at disconnect• Self-locking toggle handle prevents accidental valve opening• Toggle handle and stem assembly rotate 360°• Durable ductile iron valve body with automotive grade powdercoat finish• Stainless steel 1-3/4” female Acme insert cast into the handle• No additional adapters or connectors needed for operation• Optional extended version offers 6 inches of additional reachfor filling underground containers or other hard to reachapplications• Optional composite style offers a durable lightweight handlethat is resistant to frosting and cold transfer during the fillingoperation• Optional factory installed stainless steel swivelME800GME800GWSPart No.Inlet(FNPT)Outlet(F. Acme)HandleStyleHandleMaterialFactoryInstalledE-Z TurnSwivelExtendedVersionAccessoriesHolsterME800 1” 1-3/4” Standard Aluminum No No MEP801ME800WS 1” 1-3/4” Standard Aluminum Yes No MEP801ME800C 1” 1-3/4” Standard Composite No No MEP801ME800CWS 1” 1-3/4” Standard Composite Yes No MEP801ME800G 1” 1-3/4” Fluted Aluminum No No MEP801ME800GWS 1” 1-3/4” Fluted Aluminum Yes No MEP801ME800GC 1” 1-3/4” Fluted Composite No No MEP801ME800EXTME800GCWS 1” 1-3/4” Fluted Composite Yes No MEP801ME800EXT 1” 1-3/4” Standard Aluminum No Yes NoME800EXTWS 1” 1-3/4” Standard Aluminum Yes Yes NoME635-8-03 Replacement retaining ring for ME800XTFor LP-Gas& NH 3CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 53 -

Hose End Valve LockDesigned to prevent valve operation while in place, eliminating the possibility ofaccidental discharge and/or theft of product. Simply slide the lock over the handle/bonnet of the hose end or quick acting dispensing valve. For maximum security acommon padlock can be installed.ME540Hose End Valve Lock Features• All stainless steel construction• 3/8” diameter through holes for standard 2-1/2” shackle style padlockPadlockSoldSeparatelyPartNo.FitsAccessories2-1/2” Deep Shackle PadlockKeyed Alike Keyed DifferentME800GNot IncludedME540 ME800, ME810, ME820 Series ME540P-KA ME540P-KDHose End Valve HolsterDesigned to provide a durable and convenient receptacle to store bobtail hose end delivery valves during over-the-road transit.This holster can be mounted fully above deck or partially below deck in left or right hand hose reel applications with an ergonomicangle providing optimum conditions for delivery personnel.Hose End Valve Holster Features• All aluminum and stainless steel construction• Urethane anti-vibration valve sleeve to preventincidental damage to delivery valve• Machined adjustment ribs for easy, secureheight adjustment• Deck backing plate and all mounting hardwaresuppliedMEP801Part No.FitsAccessoriesUrethane WeatherHoodMEP801 ME800 Series MEP801HMEP801H- 54 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Hose End Swivel ConnectorsThe hose end swivel connector allows the hose end valve to rotate 360°creating an easier connection to the tank filler valve while under pressure. It also promoteshose life by preventing twisting and kinking during reeling and unreeling from hose reel.Hose End Swivel Connector Features• All stainless steel construction for maximum durability and corrosion resistance• Large bearing surface for increased strength and durability• 360° rotation under maximum working pressure of 400 psigInlet OutletPart No. (FNPT) (MNPT)• Our LISTED seal pack design allows for extremely long life with nomaintenance requiredME850SS-6 3/4” 3/4”• Straight through bore for unobstructed flow characteristicsME850SS-6/8 3/4” 1”• See low emission hose end valves for factory installedME850SS-8 1” 1”ME850SS-8/6 1” 3/4”For LP-Gas& NH 3Grounding StudDesigned to help prevent static electricity from being generated due to friction from the pump. In somecases static electricity can build-up enough to create an ignition source and cause an explosion.Part No.ThreadME4H 3/8”-16Smart Interlock TechnologyDesigned to prevent a vehicle from being operated while the hose end delivery valve, loading line or wheel chocks are in use. Thesmart interlock technology connects directly to the Allison Automatic Transmission through the “Auxiliary Function RangeInhibit” or braking system for manual transmission vehicles. This revolutionarysystem incorporates the industry’s best and most durable sensor, TurckME825-16not includedSmart Interlock Technology Features• “Potted” Turck proximity switch for maximum weatherresistance and security against vibration• Supplied with water tight conduit and necessarywiring hardware to reach 5’ below deck with watertight receptacle plugSensor Bracket Assembly Features• Smart interlock technology• Molded urethane sensor body housing for durability andmaximum sensor protection• Stainless steel all weather mounting band andhardwareME441F8not includedME868-16not includedME868PIBCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 55 -

Smart Interlock TechnologyME200PIBKME890PIBSmart InterlockTechnologyME217PIBPart No.DescriptionTemperatureRangeAccessoriesME200PIBME200PIBKME217PIBSensor Bracket Assembly for ME200Wheel ChocksSensor Bracket Assembly with ME200Wheel ChocksSensor Bracket Assembly forME217 Series-20° to +160° F.-20° to +160° F.-20° to +160° F.ME200EXT(Standoff Extension Kit)ME503PIBME868PIBSensor Bracket Assembly forME503-16 & ME252-16Sensor Bracket Assembly forME868 Valve Series-20° to +160° F.-20° to +160° F.MEP801PC/20(20’ Proximity Cable)MEP801PIHME800Not IncludedMEP801PIHMEP801PIKMEP801PIKLSensor Assembly with MEP801Hose End Valve HolsterInterlock Retro Fit Kit for MEP801Hose End Valve HolsterLow Temperature Interlock RetroFit Kit for MEP801 Hose End ValveHolster-20° to +160° F.-20° to +160° F.-50° to +160° F.MEP801PC/30(30’ Proximity Cable)Includes Water TightReceptacle PlugME890PIBUniversal Sensor BracketAssembly for Enclosures-20° to +160° F.MEP801PIKSmart Interlock Technology Wiring Harness KitsPart No.DescriptionNo. ofRelaysLED PowerIndicatorInlineFuseCableLengthAccessoriesMEP801PCK/20MEP801PCK/30Wiring Harness KitWiring Harness Kit11YesYesYesYes20’30’MEP801PC/20(20’ Proximity Cable)MEP802PCK/20 Wiring Harness Kit 2 Yes Yes 20’MEP801PC/30(30’ Proximity Cable)MEP802PCK/30 Wiring Harness Kit 2 Yes Yes 30’MEP803PCK/30 Wiring Harness Kit 3 Yes Yes 30’Includes Water TightReceptacle PlugMEP802PCK/20- 56 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Quick Acting Dispensing ValvesDispensing valves are designed to be used at the end of a filling hose for bobtail, dispensing system or nurse tank fillingoperations. These valves have instant full-on flow with the added protection of a quick closing, self-locking handle to preventaccidental opening of the valve during transport.ME810SeriesME820SeriesFor LP-Gas& NH 3Quick Acting Dispensing Valve Features• All stainless steel internal components• Self-locking toggle handle prevents accidentaloperation• Durable ductile iron valve body with automotivegrade powder coat finish• Toggle handle and stem assembly rotate 360°• Stainless steel factory installed vent valveAnglePart No.GlobeInlet& Outlet(FNPT)No.ofSidePortsME810-4 ME820-4 1/2” 1ME810-6 ME820-6 3/4” 1ME810-8 ME820-8 1” 1* Rated for LP-Gas & NH 3AccessoriesMNPT x 1-3/4 F. Acme AdapterShortBrassME110ME110CME111ME111CME112ME112CShortSteel*—ME111SME111SCME112SME112SCExtendedSteel*ME635-4ME635G-4ME635-6ME635G-6ME635-8ME635G-8ME821SeriesEconomy Quick Acting Dispensing Valve Features• All stainless steel internal components• Reduced size and weight for easier handling• Self-locking toggle handle preventsaccidental operation• Durable ductile iron valve body withautomotive grade powder coat finish• Toggle handle and stem assemblyrotate 360°• Factory installed 1/4” FNPT plugged portsPart No.BodyStyleInlet& Outlet(FNPT)No. ofSidePortsME821-4 Globe 1/2” 2ME821-6 Globe 3/4” 2ME821B-4** Globe 1/2” 2ME821B-6** Globe 3/4” 2AccessoriesFor LP-Gas& NH 3MNPT x 1-3/4 F. Acme AdapterShortBrassME110ME110CME111ME111CME110ME110CME111ME111CShortSteel*—ME111SME111SC—ME111SME111SCExtendedSteel*ME635-4ME635G-4ME635-6ME635G-6ME635-4ME635G-4ME635-6ME635G-6* Rated for LP-Gas & NH 3** Includes MEJ400 Brass Vent ValveCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 57 -

Hose End Fill Check AdaptersToallyproduct discharge.Hose End Fill Adapter Features• Integral breakaway feature in the event of truck rollaway leaving check intact on tank• ME570, ME572, ME574, ME578 shortest overall heightME570ME572•swivel freely when installed on hose end valve• ME578 has a full-port design allows up to 30% More Flow• Removable shutoff key and key ring supplied• Extended versions provide an additional 7” for use onunderground tanks• Prevents pinching or cutting of the delivery hose on theprotective tank collar• Eliminates dangerous extensions that do not incorporate•ME578ME571ME574EXT•• Optional heavy duty aluminum handle with a stainless steel1-3/4” female Acme insert cast into the handleME574Part No.Filler ValveF. AcmeConnectionHose EndM. AcmeConnectionHandleStyleHandleMaterialSwivelsFactory InstalledVentValveExtendedVersionAdditionalKeysME570 1-3/4” 1-3/4” Standard Brass No No No —ME571**1-3/4” 1-3/4” Standard Brass Yes* No No —ME572 1-3/4” 1-3/4” Standard Brass Yes No No —ME572EXT 1-3/4” 1-3/4” Standard Brass Yes No Yes —ME572EXTHD 1-3/4” 1-3/4” Heavy Duty Cast Aluminum Yes No Yes —ME574 1-3/4” 1-3/4” Standard Brass Yes Yes No —ME574EXT 1-3/4” 1-3/4” Standard Brass Yes Yes Yes —ME574EXTHD 1-3/4” 1-3/4” Heavy Duty Cast Aluminum Yes Yes Yes —ME578 1-3/4” 1-3/4” Standard Brass Yes No No ME578-02ME578C 1-3/4” 1-3/4” Heavy Duty Brass Yes No No ME578-02** Order ME571H for high flow adapter with fluted gripME572EXTHD- 58 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Excess Flow Valvesliquid or vapor LP-Gas or NH 3sult ofequalizes on both sides of the shutoff poppet.WarningExcess Flow Valve Features• Integral breakaway feature leaves valve assembly intact withinternal hex broach for easy removal• All stainless steel internal componentsME882SSeriesBrassPart No.Steel*StainlessSteel*InletMNPTOutletFNPTClosingFlowGPMPropaneME880-4/1.8 — — 1/4” 1/4” 1.8ME880-6/4.6 ME880S64.6 ME880SS64.6 3/4” 3/4” 4.6ME880-6/14 ME880S614 ME880SS614 3/4” 3/4” 14ME880-6/17 ME880S617 ME880SS617 3/4” 3/4” 17ME880-6/22 ME880S622 ME880SS622 3/4” 3/4” 22ME880-6/28 ME880S628 ME880SS628 3/4” 3/4” 28ME880-10/32 ME880S1032 ME880SS1032 1-1/4” 1-1/4” 32ME880SeriesME880-10/42 ME880S1042 ME880SS1042 1-1/4” 1-1/4” 42ME880-16/80 ME880S1680 ME880SS1680 2” 2” 80ME880-16/105 ME880S16105 ME880SS16105 2” 2” 105ME880-16/114 ME880S16114 ME880SS16114 2” 2” 114— ME882S1680 — 2” 2” MNPT 80— ME882S16105 — 2” 2” MNPT 105— ME882S16114 — 2” 2” MNPT 114— ME880S24265 — 3” 3” 265— ME880S24350 — 3” 3” 350— ME882S24265 — 3” 3” MNPT/2” FNPT 265— ME882S24350 — 3” 3” MNPT/2” FNPT 350Liquid Butane Capacity = Flow Rate x .94Liquid Anhydrous Ammonia Capacity = Flow Rate x .90ME880SSeriesCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 59 -

High Flow Back Check ValvesThese back check flow valves lead the industry with up to 20% More Flow than the nearest competitor. Back check valves provideflow protection to container openings or liquid lines where flow is intended for one direction. The valve is normally closed untilpressure activates the valve when flow is directed into piping or containers causing the back check to open. When flow stops orreverses, the check returns to the closed position.These valves come with dual seating capabilities or an optional bonded soft seat on the three inch model. With the dual seatingcapabilities, the factory installed O-ring provides a leak-free, soft seat seal which enables repair and maintenance to be done ondepressurized plumbing. Remove the O-ring to allow metal-to-metal seating with a minimal leak seal to restrict flow in case of abreak in the line. Note: Leaving the O-ring soft seat installed on the valve will require a minimum of 15 psig pressure differentialbetween the transfer line and container to unseat the valve and allow it to fully open.The optional bonded soft seat on the three inch model cannot be removed for metal-to-metal seating.High Flow Back Check Valve Features• Up to 20% More Flow than nearest competitor• Maximum flow achieved by full port and increasedstem travel design• Integral breakaway feature leaves valve assemblyintact with internal hex broach for easy removal• All stainless steel internal components• Dual purpose seat reduces inventory from 2 to 1ME872S-16BrassPart No.Steel*StainlessSteel*InletFNPTOutletMNPTPropane Flowat 10 PSIGPressureDifferentialME870-6 ME870S-6 ME870SS-6 3/4” 3/4” 24 NoME870-10 ME870S-10 ME870SS-10 1-1/4” 1-1/4” 61 NoME870-16 ME870S-16 ME870SS-16 2” 2” 187 NoBondedSoftSeat— ME872S-16 — 2” MNPT 2” 187 No— ME870S-24 — 3” 3” 449 No— ME870SBN-24** — 3” 3” 449 YesME870S SeriesShown with O-RingRemoved forMetal-to-Metal Seat— ME872S-24 — 2” FNPT/ 3” MNPT 3” 449 No— ME872SBN-24 — 2” FNPT/ 3” MNPT 3” 449 Yes* Rated for LP-Gas & NH 3** Use for high flow transport applicationsLiquid Butane Capacity = Flow Rate x .94Liquid Anhydrous Ammonia Capacity = Flow Rate x .90ME870SBN-24Shown with BondedSoft SeatME870 SeriesShown with O-RingSoft Seat- 60 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Accu-Max Float GaugesDesigned to measure liquid levels within horizontal DOT and Stationary ASME Tanks with fluidcapacities above 2,300 gallons. For maximum gauge life, the float arm features an integral springloaded shock absorber for harsh over-the-road applications. The standard dial face features a blackbackground for reduced glare with glow technology providing an easy to read “glow in the dark” dialface, perfect for low light situations. An optional classical style dial face is available. These gaugesare suitable for use in bobtail, transport, railcar and bulk storage applications.ME930-72Note: These gauges must be installed on the centerline of the tank’s side or end for accurate readings.Accu-Max Float Gauge Features• All stainless steel construction• Welded tube to coupling design for maximumstrength and durability• Dial face 100% sealed and argon filled toprevent moisture build-up & fogging• Factory set and precision tuned for superbaccuracy• Dial face and mounting hardware universalwith other industry standard gauges• Mounts to all standard 8 bolt tank flangeadapters• Custom length tank configurations availableupon request for 30” to 300” I.D. tankPart No. Type Style Dial FaceDialSizeTankDiameterME930-72 DOT Standard Glow/Black 4” 72”ME930-79 DOT Standard Glow/Black 4” 79”ME930-84 DOT Standard Glow/Black 4” 84”ME930C-72 DOT Classic Silver/Black 4” 72”ME930C-79 DOT Classic Silver/Black 4” 79”ME930C-84 DOT Classic Silver/Black 4” 84”ME940-108 ASME Standard Glow/Black 8” 108ME940-130 ASME Standard Glow/Black 8” 130ME940C-108 ASME Classic Silver/Black 8” 108ME940C-130 ASME Classic Silver/Black 8” 130Accu-Max Limited Warranty: Marshall Excelsior warrants Accu-Max float gauges and repair kits tothe original buyer to be free of defects in material and workmanship under normal service and usefor two years from manufactured date.For LP-Gas& NH 3“Glow” TechnologyStandard DialME940 ASME SeriesStandard “Glow” DialME930 DOT SeriesClassic DialFloat Gauge AccessoriesDesigned for mounting float gauges in DOT or ASME tanks.These zinc plated steel 8 bolt mounting flanges feature 1/2”-13threads for easy installation.Part No. Connection ConnectionME931 2-1/2” MNPT 1/2”-13 FemaleME932 Weld 1/2”-13 Female ME931ME932CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 61 -

Liquid Transfer Valves & AdaptersDesigned to provide a safe means by which to transfer liquid from a tank during an emergency or container relocation. These valvescan be equipped with an integral excess flow device for direct product transfer or without when used in conjunction with liquidwithdrawal adapter (ME458 Series) and tank valve (ME460 & ME462 Series).Warning: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceedthe closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. See the Excess FlowWarning page for more information regarding the use of excess flow devices.Liquid Transfer Valve Features• Double O-ring stem seal design ensures leak free operation• Double lead stem thread ensures quick and efficient operation• 3/4” MNPT inlet x 3/4” FNPT outlet• Additional features for steel transfer valves• All stainless steel internal components• Durable ductile iron valve body with automotive gradepowder coat finish• Equipped with convenient upstream and downstream 1/4”FNPT plugged ports for optional accessoriesME450ME449EXS-22Tank Valve Features• Provides excess flow protection in the event of a downstream connection or line failure• Safety breakaway feature leaves valve seals intact in the event of truck roll-away• 6-14 psig closing flow pressure differential for maximum product transferME462S• Fully interchangeable with all existing valve models and adapters• Additional features for steel and stainless steel tank valves• Meets requirements for installation into DOT storage containers like bobtails and transports• Steel model features a rust inhibitor compound between the cap and body threads to prevent corrosionPart No.MaterialExcessFlowClosingFlow/GPMLiquidWithdrawalAdapter 3/4”FNPT x1-5/8” UNF3/4”MNPTAccessoriesLiquid Withdrawal Tank Valve1-5/8” UNF Male1-1/4” MNPTBrass Steel* Brass Brass Steel*ME449 Brass No — ME458 ME458S ME460*** ME462*** — —ME449H Brass No — ME458 ME458S — — — —StainlessSteel*ME449S Ductile Iron* No — — ME458S — — ME462S*** ME462SS***ME449EXS/22 Ductile Iron* Yes 22 — — — — — —ME449EXS/28 Ductile Iron* Yes 28 — — — — — —ME450** Brass No — — — ME601-6 ME601-10 — —HydrostaticRelief ValveMEH225MEH25/450Factory InstalledMEH225MEH225SS/350MEH225SS/400MEH225SS/440Vent ValveMEJ400MEJ400SCMEJ400/72MEJ402S* Rated for LP-Gas & NH 3** MEJ400 Vent Valve Factory Installed *** Includes an excess flow feature- 62 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Liquid Transfer AdaptersDesigned for use between the liquid transfer shutoff valve and the liquid withdrawal tank valve.These adapters enable the tank valve to open properly and allows a tight seal when transferringliquid. Special threads on the tank valve and the adapter help eliminate tampering.ME458The ME458 Series fits all new underwriters laboratories listed valves. The ME453 and ME455 fitolder style liquid withdrawal tank valves that are still in service and have not been replaced. Theywill not provide a positive seal during actuation of liquid withdrawal tank valve until fully seated.Part No.MaterialInletConnectionOutletConnectionME458 Brass 1-5/8” UNF 3/4” FNPTME458S* Steel 1-5/8” UNF 3/4” FNPTME453 Brass 3/4” NGT 3/4” FNPTME455 Brass 3/4” NGT 3/4” MNPT* Rated for LP-Gas & NH 3ME453ME455Combination ValvesDeveloped to mount a pressure gauge and fixed tube liquid level gauge all in one valve. Theshutoff portion of the valve increases the pressure gauge’s life and accuracy by eliminatingconstant gauge pressure and allows for easy gauge replacement. To replace a gauge simplyclose the valve and open the vent valve to relieve pressure before disassembling pressuregauge.For LP-Gas& NH 3The valve can be installed at the maximum fill level or an 1/8” MNPT dip tube can beinstalled on the container connection side to set any liquid level desired. For use in ASMEbulk storage containers and DOT transport tank installations.ME830Combination Valve Features• All steel and stainless steel component construction• Integral #54 orifice provides gauge dampening protection• Durable ductile iron body with automotive grade powdercoat finish or plated steel bodyMEJ415GMEJ415Part No.MaterialContainerConnectionMNPTTwo ServiceConnectionsFNPTDip TubeConnectionFNPTStainlessSteel VentValveME830 Ductile Iron 3/4” MNPT 1/4” FNPT 1/8” IncludedAccessoriesStainless Steel0-400 PSIGPressure GaugeMEJ526MEJ542MEJ415 Steel 3/4” MNPT 1/4” FNPT 1/8” MEJ402S MEJ542MEJ415G Steel 3/4” MNPT 1/4” FNPT 1/8” Included IncludedCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 63 -

Actuator AccessoriesME707—The quick release valve is used in conjunction with Marshall Excelsior’s air actuators to decrease the response time whenclosing actuators. They are particularly effective when long distances (75 feet or more) exist between the actuator and the actuatorcontrol valve.ME708—The 0-150 psig air pressure regulator prolongs the life of the air actuator and air system by allowing the air pressure to beset and regulated at the minimum required operating pressure for each individual system.ME709—The gas/air filter is used to filter foreign materials and/or particles from LP-Gas systems such as motor fuel/carburetionsystems. Also designed to be used to filter air supply lines for internal and emergency shutoff valve actuator systems.ME707ME708UniversalMountingBracketIncludedME709PartNo.InletOutletME707 3/8” FNPT 3/8” FNPT (2 Ports)ME708 1/4” FNPT 1/4” FNPTME709 1/4” FNPT 1/4” MNPTInternal Valve ActuatorsPowerTorq Rotary ActuatorsThese direct drive actuators are designed to maximize the life of the internal valve by eliminating side pressure on the valve’spacking stem. These actuators are intended to be used at remote locations or operated directly off the air brake system in bobtailor transport applications.The low temperature factory installed seals allow these actuators to be used with air, nitrogen, carbon dioxide or LP-Gas vapor.In case of a fire the factory provided thermal plug melts at 212° Fahrenheit releasing pressure allowing the internal valve to close.The factory set rotation of these actuators require no modification, can be oriented in any direction and all hardware needed forinstallation is provided.PowerTorq Rotary Actuator Features• Stainless steel all weather mounting hardware• Field repairable under full tank pressure• Anodized aluminum actuator body with easy to seeopen/close indicator• No pinch points for operator safety• Includes mounting bracket for ME707 Quick Release ValveNote: ME707 is not required for operationPart No.ActuatorTypeFits MEC* Fits Fisher* Internal ValveME707 & Internalvalves not includedME225Actuator Operating Pressure Limits:Minimum = 25 PSIGMaximum = 125 PSIGRecommended = 40-60 PSIGPowerTorqActuatorsME225 Direct Drive ME990-10 Fisher ® C407 1-1/4” ThreadedME226Direct DriveME990-16, ME990-24,ME990S-3F-24Fisher ® C402, C421,C427, C471, C4772” & 3” ThreadedME227Direct DriveME990S-3DF &ME990S-3DFMFisher ® C403-24 &C483-24 Series3” Double FlangeME227ME228 Direct Drive ME990-4FFisher ® C404-32 &C484-32 Series4” Single Flange* Also fits Cavagna 6902900 Series internal valvesFisher® and Fisher® Internal Valves are the trademarks of Emerson Process Management;Cavagna is the trademark of Cavagna Group- 64 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Internal Valve ActuatorsPowerStroke and FaStroke ActuatorsDesigned with a heavy duty stainless steel frame to withstand the toughest conditions. These actuators are intended to be used atremote locations or operated directly off the air brake system in bobtail or transport applications.The actuator’s smooth acting cam opens the internal valve lever when air, nitrogen, or carbon dioxide is applied to the line. Whenpressure to the line is released, the internal valve automatically closes. In case of a fire the factory provided thermal plug melts at212° Fahrenheit releasing pressure allowing the internal valve to close. These actuators require no modification and all hardwareneeded for installation is provided.Part No.ME205ActuatorTypeAirstroke TMby FirestoneFits MEC* Fits* Internal ValveME990-10 Fisher ® C407 1-1/4” ThreadedME205RME206ME207Airstroke TMby Firestone#9 Chamber#9 Chamber— RegO ® A3209R 1-1/4” ThreadedME990-16, ME990-24,ME990S-3F-24ME990S-3DF &ME990S-3DFMFisher ® C402, C421, C471,C427, C477Fisher ® C403-24 &C483-24 Series2” & 3” Threaded3” Double FlangeME207SF #9 Chamber — Fisher ® C404-24 Series 3” Single FlangeME208SF #24 Chamber ME990-4FFisher ® C404-32 &C484-32 Series4” Single FlangeME205FaStrokeActuatorsME710Airstroke TMby Firestone— RegO ® Flowmatic ® Three-Way Valve* Also fits Cavagna 6902900 Series internal valvesME205RFaStroke & PowerStroke Actuator Features• Stainless steel all weather bracket• Field repairable without complete disconnect from internal valve ME710• Repairable with common automotive brake chamber• High gloss automotive grade black epoxy coatingPowerStroke ActuatorsActuator Operating Pressure Limits:Minimum = 20 PSIGMaximum = 125 PSIGRecommended = 20-25 PSIGME207ME206ME208SF*Internal valves notincludedAirstroke TM is a trademark of Firestone Industrial Products Company, Fisher® and Fisher® Internal Valves are the trademarks of Emerson Process Management; RegO® and Flomatic® Internal Valves are thetrademarks of Engineered Controls International, Inc. and Cavagna is the trademark of Cavagna GroupCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 65 -

Emergency Shutoff Valve ActuatorsDesigned to be used with emergency shutoff valves in remote locations. Pressure to the line enables a smooth acting cam tocompletely open the emergency shutoff valve for full flow operation. When pressure to the line is released, the emergency shutoffvalve automatically closes. In case of a fire a thermal plug melts at 212° Fahrenheit releasing pressure allowing the ESV to close.These actuators require no modification and all hardware needed for installation is provided.The PowerTorq direct drive actuator maximizes the life of the emergency shutoff valve be eliminating side pressure on the valve’spacking stem.PowerTorq Rotary Actuator Features• Stainless steel all weather mounting hardware• Field repairable under full tank pressure• Low temperature factory installed seals allow use withair, nitrogen, carbon dioxide or LP-Gas vapor• Anodized aluminum actuator body with easy to seeopen/close indicator• No pinch points for operator safety• Factory installed thermal plug• Includes mounting bracket for ME707 Quick ReleaseValve. Note: ME707 is not required for operationPowerTorqME552Actuator Operating Pressure Limits:Minimum = 25 PSIGMaximum = 125 PSIGRecommended = 40-60 PSIGME980 SeriesEmergency ShutoffValves not includedSafetyStroke Actuator Features• Heavy duty stainless steel all weather bracket• Use with air, nitrogen or carbon dioxide• Uses existing Fisher ® thermal plugME551PartNo.ME551ME552ActuatorTypeAirstroke TM byFirestoneDirect DriveFits MEC Fits ESVME980-10, ME980-16,ME980-16-2F, ME980-24,ME980-24-3F, ME980-24-4FME980-10, ME980-16,ME980-16-2F, ME980-24,ME980-24-3F, ME980-24-4FAirstroke TM is a trademark of Firestone Industrial Products Company, Fisher® andFisher® Internal Valves are the trademarks of Emerson Process ManagementFisher ® N550 Series 1-1/4”, 2” & 3”Fisher ® N550 Series 1-1/4”, 2” & 3”Actuator Operating Pressure Limits:Minimum = 20 PSIGMaximum = 125 PSIGRecommended = 20-25 PSIG- 66 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

3/4” & 1” Emergency Shutoff ValvesEmergency Shutoff Valves (ESV’s) are designed to provide rapid andpositive shutdown of gas lines should a down stream rupture or pipingbreak occur. Due to the presence of a built-in fusible element at the valveoperating hub the ESV will automatically close when exposed to heat between212° F. - 250° F. These valves are ideally suited for installation at direct firedvaporizer inlets for automatic emergency shutdown as a result of fire or atdispensing pump inlets to provide immediate and positive remote shutdown.ME980C-6Emergency Shutoff Valve Features• Powder coated ductile iron body with cast hexagonal ends for maximum durability and ease of installation• Integral swing away check valve with soft seat to promote maximum product flow and minimize product loss inthe event of a line failure• All stainless steel internal component construction provides maximum corrosion resistance• Provides clear visual indication if valve is open / closed• UL LISTED for use with LP Gas and Anhydrous Ammonia - 400 PSI WOG• Integral fusible element for automatic closure when exposed to fire• Durable Teflon® packing gland and resilient seals provide long lasting service life• Available with pneumatic or cable style latch mechanismPart No. Description Latch Type OALME980-6 3/4” FNPT Emergency Shutoff Valve (ESV) Pneumatic 4-3/4”ME980-8 1” FNPT Emergency Shutoff Valve (ESV) Pneumatic 4-3/4”ME980C-6 3/4” FNPT Emergency Shutoff Valve (ESV) Cable 4-3/4”ME980C-8 1” FNPT Emergency Shutoff Valve (ESV) Cable 4-3/4”3/4” & 1” Flow Indicating Swing Check ValvesPromotes maximum pump efficiency by providing system operators with a visual inspection point for monitoringliquid flow conditions as well as providing a soft seat back check valve should product flow reverse for anyreason. Installation of a flow indicating swing check valve upstream of the pump, allows the operator toobserve product flow and make pump adjustments for maximum flow without cavitation. Suitable forstationary and mobile applications.ME981-6Flow Indicating Swing Check Valve Features• Powder coated ductile iron body with cast hexagonal ends for maximumdurability and ease of installation• Integral swing away check valve with soft seat to promote maximumproduct flow and minimize product loss in the event of a line failure• All stainless steel internal component construction provides maximumcorrosion resistance• Clear / Easy to read flow indicator allows the operator to easily see if thevalve is open or closed• UL LISTED for use with LP Gas and Anhydrous Ammonia - 400 PSIPart No. Description Material OALME981-6 3/4” FNPT Flow Indicating Check Valve Ductile Iron 4-3/4”ME981-8 1” FNPT Flow Indicating Check Valve Ductile Iron 4-3/4”CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 67 -

1-1/4” - 3” Flow Indicating Swing Check ValvesPromotes maximum pump efficiency by providing system operators with a visual inspection point for monitoring liquid flowconditions as well as providing a soft seat back check valve to prevent reverse product flow. Installation of a flow indicating swingcheck valve upstream of the pump allows the operator to observe product flow and make pump adjustments for maximum flowwithout cavitation. Suitable for stationary and mobile applications.ME981-10ME982-10Flow Indicating Swing Check Valve Features• Powder coated ductile iron body for maximum durability• Removable flanged ends for ease of field service• Integral swing away check valve with soft seat to promote maximum product flow and preventreverse product flow• All stainless steel internal component construction provides maximum corrosion resistance• Magnetically coupled flow indicator for maximum protection against leaks and minimal resistance toproduct flow• Clear/Easy to read flow indicator with “Glow” arrow allows the operator to easily see if the valve isopen or closed• UL LISTED for use with LP Gas and Anhydrous Ammonia - 400 PSI WOGPart No. Description Material Flange Material OALME981-10 1-1/4” FNPT Flow Indicating Check Valve Ductile Iron Ductile Iron 5-3/8”ME981-16 2” FNPT Flow Indicating Check Valve Ductile Iron Cast Steel 6-7/8”ME981-24 3” FNPT Flow Indicating Check Valve Ductile Iron Ductile Iron 9-5/8”ME982-10 1-1/4” FNPT Non-Indicating Check Valve Ductile Iron Ductile Iron 5-3/8”ME982-16 2” FNPT Non-Indicating Check Valve Ductile Iron Cast Steel 6-7/8”ME982-24 3” FNPT Non-Indicating Check Valve Ductile Iron Ductile Iron 9-5/8”ME981-16-2F 2” - 300 lb. Flange Flow Indicating Check Valve Ductile Iron Ductile Iron 11-7/8”ME981-24-3F 3” - 300 lb. Flange Flow Indicating Check Valve Ductile Iron Ductile Iron 14-1/8”ME981-24-4F 4” - 300 lb. Flange Flow Indicating Check Valve Ductile Iron Ductile Iron 14-1/4”ME982-16-2F 2” - 300 lb. Flange Flow Non-Indicating Check Valve Ductile Iron Ductile Iron 11-7/8”ME982-24-3F 3” - 300 lb. Flange Flow Indicating Check Valve Ductile Iron Ductile Iron 14-1/8”ME982-24-4F 4” - 300 lb. Flange Flow Indicating Check Valve Ductile Iron Ductile Iron 14-1/4”- 68 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Quad-Port Relief Valve ManifoldDesigned for use with large LP-Gas and NH 3be removed while the remaining valves remain under pressure protecting the tank and contents. Each manifold model is rated basedExternal Pressure Relief Valve Features• Heavy duty ductile iron body®• packing stem seals• Molded rubber weather guard for manifold rotary gearwith port plug• Integral breakaway feature leaves seat and seal intact•• Integrated pilot equalizing feature•• Convenient lifting chain included• 3-1/2”-8 outlet thread accepts 3” MNPT pipeawayLarge port handle& easy to read portindicatorsPart No.Flange SizeNo. ofReliefValvesApplicationFlow CapacitySCFM/Air**UL @ 120% SetPressureSealMaterial*Factory Installed Relief ValveStart-to-DischargeSettingPSIGPart No.Accessory8 Stud / NutUniversalMountingKitME903S3F250V 3” - 300# ** 3 LPG 20,400 (2) Viton ® 250 MEV250VM/250 ME904SKME903S3F250C 3” - 300# ** 3 LPG & NH 320,400 (2) Nitrile 250 MEV250CN/250 ME904SKME903S4F250V 4” - 300# 3 LPG 20,400 (2) Viton ® 250 MEV250VM/250 ME904SKME903S4F250C 4” - 300# 3 LPG & NH 320,400 (2) Nitrile 250 MEV250CN/250 ME904SKME904S3F250V 3” - 300# ** 4 LPG 27,740 (3) Viton ® 250 MEV250VM/250 ME904SKME904S3F250C 3” - 300# ** 4 LPG & NH 327,740 (3) Nitrile 250 MEV250CN/250 ME904SKME904S4F250V 4” - 300# 4 LPG 27,740 (3) Viton ® 250 MEV250VM/250 ME904SKME904S4F250C 4” - 300# 4 LPG & NH 327,740 (3) Nitrile 250 MEV250CN/250 ME904SKME903S3F265V 3” - 300# ** 3 LPG 20,555 (2) Viton ® 265 MEV250VM/265 ME904SKME903S3F265C 3” - 300# ** 3 LPG & NH 320,555 (2) Nitrile 265 MEV250CN/265 ME904SKME903S4F265V 4” - 300# 3 LPG 20,555 (2) Viton ® 265 MEV250VM/265 ME904SKME903S4F265C 4” - 300# 3 LPG & NH 320,555 (2) Nitrile 265 MEV250CN/265 ME904SKME904S3F265V 3” - 300# ** 4 LPG 28,550 (3) Viton ® 265 MEV250VM/265 ME904SKME904S3F265C 3” - 300# ** 4 LPG & NH 328,550 (3) Nitrile 265 MEV250CN/265 ME904SKME904S4F265V 4” - 300# 4 LPG 28,550 (3) Viton ® 265 MEV250VM/265 ME904SKME904S4F265C 4” - 300# 4 LPG & NH 328,550 (3) Nitrile 265 MEV250CN/265 ME904SK* Nitrile not UL Listed *** Flow rating based on number of valves indicated in parenthesis ()®is a trademark of DuPont Company and Viton ® is a trademark of DuPont Performance Elastomers.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 69 -

External Pressure Relief ValvesDesigned for installation in stationary ASME applications such as bulkplant, skid tanks, underground and above ground containers, as the primarypressure relief valve.Note: This valve and all working parts are to be installed outside the container.Therefore, to ensure proper operation of the valve, the valve must be protectedfrom damage and inspections performed as prescribed by Marshall Excelsior.Steel External Pressure Relief Valve Features• All stainless steel internal components• Integral breakaway feature leaves seat and seal intact• Durable ductile iron hex base• Weep hole deflector and hex socket plugs supplied• Corrosion resistant finish• 3-1/2”-8 outlet thread accepts 3” MNPT pipeaway• Compatible with ALL 2-1/2” FNPT multiple head unitsMEV250VM/250MEP250MEP170Brass External Pressure Relief Valve Features• Compact design to fit any application• Stainless steel spring• Non-adjustable, tamper resistant design• Specially designed internal components to increase flow at dischargeMEV50/250Part No.ContainerConnectionSealMaterial*Start-to-DischargeSettingPSIGOALWrenchHexFlowCapacitySCFM/Air**UL @ 120%Set PressureSuitablefor Tanksw/SurfaceArea UpTo:***ApplicationMEV25/60 1/4” MNPT Nitrile 60 1-59/64” 7/8” — — LPGMEV25/250 1/4” MNPT Nitrile 250 1-59/64” 7/8” — — LPGMEV25/312 1/4” MNPT Nitrile 312 1-59/64” 7/8” — — LPGMEV25/375 1/4” MNPT Nitrile 375 1-59/64” 7/8” — — LPGMEV50/250 1/2” MNPT Nitrile 250 2-1/2” 1-1/8” 200 — LPGMEV50/375 1/2” MNPT Nitrile 375 2-1/2” 1-1/8” — — LPGMEV75/250 3/4” MNTP Nitrile 250 2-21/32” 1-1/8” — — LPGAccessoriesMEP173Pipeaway AdapterMEP174Pipeaway AdapterMEV75/312 3/4” MNTP Nitrile 312 2-21/32” 1-1/8” — — LPGMEV75/375 3/4” MNTP Nitrile 375 2-21/32” 1-1/8” — — LPGMEV250VM/250 2-1/2” MNPT Viton ® 250 10-1/2” 4-1/8” 10,333 610 Sq Ft. LPG MEP170MEV250CN/250 2-1/2” MNPT Nitrile 250 10-1/2” 4-1/8” 10,333 610 Sq Ft. LPG & NH 3Relief Valve AdapterMEV250VM/265 2-1/2” MNPT Viton ® 265 10-1/2” 4-1/8” 10,948 655 Sq Ft. LPGMEP250Installation &MEV250CN/265 2-1/2” MNPT Nitrile 265 10-1/2” 4-1/8” 10,948 655 Sq Ft. LPG & NH 3Removal ToolNote: Kalrez option available* Nitrile and Kalrez ® not UL Listed** Flow rates are shown for bare relief valves, pipeaways will reduce flow*** Per NFPA 58, table 5.7.2.5 area shown is for UL or ASME flow rating, which ever is greaterViton ® and Kalrez ® are trademarks of DuPont Performance Elastomers.- 70 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Full Internal Pressure Relief ValveDesigned for use on forklift cylinders and other DOT removable cylinders up to 122 pounds of LP-Gas capacity. The workingcomponents of this valve are located inside the tank reducing possible malfunction caused by outside debris or other foreignmaterials.Note: NFPA #58 states, “All containers used in industrial trucks (including fork lift truck cylinders) service shall have thecontainer pressure relief valve replaced by a new or unused valve within 12 years of the date of manufacture of the container andevery 10 years thereafter.”Full Internal Pressure Relief Valve Features• Stainless steel spring• Non-adjustable, tamper resistance design• 45 and 90 degree discharge vents availableMEP175-90MEP175CMEV75FIRMEP175-45Part No.ContainerTypeContainerConnectionSealMaterial*Start-to-DischargeSettingPSIGUL FlowCapacitySCFM/ Air**Per CGA S1.1@ 480 PSIGApplicationProtectiveCapReliefValve PlugAccessoriesDischarge Vents45° Angle 90° AngleMEV75FIR* DOT 3/4” MNPT Viton ® 375 368 LPG MEP175C MEP175P MEP175-45 MEP175-90* UL Listed in accordance with Compressed Gas Association Pamphlet S-1.1, Pressure Device Standard for Cylinders;Meets requirements for use on DOT containers with 242 lbs. or less weight of water or 122 lbs or less of LP-Gas** Flow rates are shown for bare relief valves, pipeaways will reduce flowViton ® is a trademark of DuPont Performance Elastomers.Underground Tank Cluster Valve Removal ToolUniversal design for convenient removal of underground tank cluster valves using a standard 3/4” drive socket wrench.Underground Tank Cluster Removal Tool Features• Durable cast steel construction• Powder coat finish for maximum corrosion protection• 3/4” drivePart No.MEP126DescriptionUnderground Tank Cluster Valve Removal ToolMEP126CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 71 -

Hydrostatic Pressure Relief ValvesDesigned to protect piping and shutoff valves from over pressure situations where liquid LP-Gas or NH 3has the potential to betrapped. These relief valves provide pressure relief at or in excess of the stated pressure setting, protecting against line or plumbingsystem failures.Note: NFPA #58 states, “Hydrostatic relief valves designed to relieve the hydrostatic pressure that can develop in sections of liquidpiping between closed shutoff valves shall have pressure settings not less than 400 psig or more than 500 psig unless installed insystems designed to operate above 350 psig. Hydrostatic relief valves for use in systems designed to operate above 350 psig shallhave settings not less than 110 percent or more than 125 percent of the system design pressure.”Hydrostatic Relief Valve Features• Compact design to fit any application• Stainless steel spring• Non-adjustable, tamper resistant design• Stainless steel models rated for LP-Gas & NH 3• Specially designed internal components toincrease flow at dischargeMEH225SSMEH25MEH50MEH75Part No.BodyMaterialSealMaterialStart-to-DischargeSettingPSIGInletMNPTA B C DAccessoryPipeawayAdapterMEH225 Brass Nitrile 440 1/4” 1-1/16” 13/16” 1/4” 9/16” Hex —MEH225SS/350 Stainless Steel Nitrile 350**** 1/4” 1-1/16” 13/16” 1/4” 9/16” Hex —MEH225SS/400 Stainless Steel Nitrile 400 1/4” 1-1/16” 13/16” 1/4” 9/16” Hex —MEH225SS/440 Stainless Steel Nitrile 440 1/4” 1-1/16” 13/16” 1/4” 9/16” Hex —MEH25/450 Brass Nitrile 450 1/4” 1-59/64” 1-43/64” 1/4” 7/8” Hex MEP173*DBCAMEH25K/450 Brass Kalrez ® 450 1/4” 1-59/64” 1-43/64” 1/4” 7/8” Hex MEP173*MEH25V/450 Brass Viton ® 450 1/4” 1-59/64” 1-43/64” 1/4” 7/8” Hex MEP173*MEH50/460 Brass Nitrile 460 1/2” 2-1/2” 2-1/8” 3/8” 1-1/8” Hex MEP174**MEH75/460 Brass Nitrile 460 3/4” 2-21/32” 2-5/32” 1/2” 1-1/8” Hex MEP174**MEJ602H*** Brass Nitrile 440 1/4” — — — — —* 1/4” FNPT Outlet; ** 1/2” FNPT Outlet; *** Factory Installed Vent Valve, **** Special ApplicationsViton ® and Kalrez ® are trademarks of DuPont Performance Elastomers.Protective Relief Valve CapsMEP173These protective caps aremade of durable, faderesistant vinyl. All relief valvesmust have a protective cap tokeep debris and water out ofthe valve.MEH501Part No.CapIDCapHeightMEH501-.437 .437” 3/8”ReplacementProtective Capfor Part No.MEH225MEH225SS SeriesPart No.Cap IDCapHeightReplacementProtective Capfor Part No.MEH501-1.75 1.75” 1” —MEH501-.812 .812” 1” MEH25/450 MEH501-2.25 2.25” 1” —MEH501-1.062 1.062” 3/4”MEH50/460MEH75/460MEH501-2.625 2.625” 1” —MEH501-1.5 1.50” 1” — MEV250-013* 3.974 1/2” MEV250 Series* With Lanyard- 72 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Low Pressure Single Stage RegulatorsThe MEGR-230 single-stage regulators are approved for use in small portable applications and outdoor cooking appliancesulitizing low pressure.Note: Single-stage regulators are not approved for RV use.Regulator Specifications• Type: Single Stage• Orifice Diameter: 0.059 Diameter• BTU Capacity: 140,000 BTU (based on 25 PSI inlet @ 9 W.C. delivery pressure)• Max. Inlet Pressure: 250 PSI• Inlet Connection: 1/4” FNPT• Outlet Connection: 3/8” FNPT• Exterior Finish: Green Wet Coat• Diaphragm Type: Molded with O-Ring Bonnet / Body Seal• Bonnet/Body Material: Die Cast Aluminum• Listings: UL LISTED / UL 144• Mounting Holes: 3-1/2” On CenterMEGR-230MEGR-230-9Part No. Description Vent OrientationMEGR-218 Single Stage Regulator - SN FF POL w/ Plastic Handwheel x 3/8” FNPT - 90° Vent 90°MEGR-230 Single Stage Regulator - 1/4” FNPT Inlet X 3/8” FNPT Outlet Over OutletMEGR-230-9 Single Stage Regulator - SN .9 GPM Excess Flow POL Inlet x 3/8” FNPT Outlet Over OutletMEGR-230-90 Single Stage Regulator - 1/4” FNPT Inlet X 3/8” FNPT Outlet - 90° Vent 90°MEGR230-1618 Single Stage Regulator - Black F. QCC Inlet x 3/8” FNPT Outlet - 90° Vent 90°MEGR230-1326 Single Stage Regulator - Black F. QCC Inlet (100,000 BTU/ H) x 3/8” FNPT Outlet Over OutletMEGR-231 Single Stage Regulator - Hardnose FF POL Inlet x 3/8” FNPT Outlet - 90° Vent 90°CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 73 -

Pressure Reducing RegulatorsThe MEGR-1912 Series UL Listed regulators are direct-operated, spring-loaded models designed for use in a variety ofservice and industrial applications. These regulators have limited-capacity internal relief across the diaphragm to helpminimize over pressurization.The MEGR-1912 Series with capacity ratings of less than 320,000 BTU/hr (129 scfh), are often used on small portableoutdoor appliances.Underwriters Laboratories requires horizontally mounted regulators to be installed with vent opening protection to preventblockage by freezing rain.• Type: Single Stage• Max. Inlet Pressure: 250 PSI• Vent Screen: Monel• Gasket: CGR 2750• Relief Valve: Brass and Zinc• Control and Relief Valve Spring: Plated Steel• Diaphragm Assembly: Nitrile (NBR) with Zinc disk• Spring Case: Die Cast - Zinc• Spring Seat: Plated Steel• Diaphragm Plate: Plated Steel• Body Material / Lower Casting: Die Cast - Zinc• Listings: UL LISTED / UL 144MEGR-1912Part No.Inlet x OutletConnection StyleInches (mm)Outlet Pressure SettingOutlet Pressure Ranges,Inches W.C. (mbar)VentOrientationBTU/H LPG @100 PSI InletMEGR1912/101 1/4” x 3/8” FNPT 0.073 (1,8) 11-inches w.c. (27 mbar) 9.25 to 13 (23 to 32) Over Outlet 242,953MEGR1912/104 1/4” x 1/4” FNPT 0.073 (1,8) 11-inches w.c. (27 mbar) 9.25 to 13 (23 to 32) Over Outlet 242,953MEGR1912/109 1/4” x 3/8” FNPT 0.073 (1,8) 7-inches w.c. (17 mbar) 5 to 10 (12 to 25) Over Outlet 242,953MEGR1912/197 1/4” x 3/8” FNPT 0.094 (2,4) 20-inches w.c. (50 mbar) 12 to 24 (30 to 60) Over Outlet 313,488MEGR1912H108 1/4” x 3/8” FNPT 0.094 (2,4) 1.5 PSI (103 mbar) 0.5 to 2.7 psi (34 to 186 mbar) Over Outlet 297,814MEGR1912H520 1/4” x 1/4” FNPT 0.094 (2,4) 3.5 PSI (241 mbar) 2.7 to 5 psi (186 to 345 mbar) Over Outlet - - - -MEGR1912H534 1/4” x 1/4” FNPT 0.073 (1,8) 1.5 PSI (103 mbar) 0.5 to 2.7 psi (34 to 186 mbar) Over Outlet - - - -MEGR1912N113 1/4” x 3/8” FNPT 0.073 (1,8) 5-inches w.c. (27 mbar) 3 to 7 (7 to 17) Over Outlet - - - -- 74 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

High Pressure LP Gas RegulatorsThe MEGR-130 series fixed high pressure single stage regulators are designed to provide an economical solution for pounds topounds service applications. The MEGR-130 can be used to regulate air as well as LP gas. Regulators must be installed in compliancewith federal, state or local codes or laws in accordance with NFPA 58.The MEGR-350 is a single stage, adjustable high pressure regulator. The body and bonnet of both the fixed and adjustable regulatorsare precisely machined and feature a crimped design and fabric reinforced rubber diaphragm creating a positive seal for leak-freeperformance.The MEGR-360 with the Type I (QCC) is designed specifically for appliances such as turkey fryers, fish fryers, camp stoves andtorch applications that require pounds to pounds pressure instead of inches water column. These regulators will meet or exceedmost requirements on a specific outlet setting (0-10 PSI) depending on the application.Regulator Specifications• Type: Adjustable or Fixed / PSI• Max. Inlet Pressure: 250 PSIG (17,2 bar)• Inlet Connection: 1/4” FNPT• Outlet Connection: 1/4” FNPT• Orifice Diameter: 0.0625”• Exterior Finish: Red Anodized• Diaphragm: Fabric Reinforced Buna N• Bonnet/Body Material: Die Cast Zinc• BTU / H Capacity: 1,200,000 BTU/H @ 40 PSI• Listings: UL LISTED / UL 144MEGR-130-20Pre-Set at 20 PSIGMEGR-350Adjustable 0-10 PSIGPart No.DescriptionMEGR-130-05 Compact High Pressure Fixed Reg 5 PSI - 1/4” FNPT Inlet/OutletMEGR-130-10 Compact High Pressure Fixed Reg 10 PSI - 1/4” FNPT Inlet/OutletMEGR-130-20 Compact High Pressure Fixed Reg 20 PSI - 1/4” FNPT Inlet/OutletMEGR-130-30 Compact High Pressure Fixed Reg 30 PSI - 1/4” FNPT Inlet/OutletMEGR-350 Compact High Press. Adjustable Reg 0-10 PSI - 1/4” FNPT Inlet/OutletMEGR-350-20 Compact High Press. Adjustable Reg 0-20 PSI - 1/4” FNPT Inlet/OutletMEGR-350-30 Compact High Press. Adjustable Reg 0-30 PSI - 1/4” FNPT Inlet/OutletMEGR-351 Compact High Pressure Adjustable Reg 0-10 PSI - Full Flow POL x 1/4” FNPTMEGR-360 Compact High Pressure Adjustable Reg 0-10 PSI - Black F. QCC x 1/4” FNPTCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 75 -

Vent ValvesMarshall Excelsior is the only manufacturer in the industry that offers three types of vent valves—Low Emission, Self-CleaningLow Emission, and Standard Vent Valves. All the vent valves below are designed to minimize loss of product while allowingthe operator to effectively bleed down connections and detect liquid levels while filling containers. Vent valves provide aneffective means to verify valves have closed in the transfer system when installed into the downstream auxiliary port on the MarshallExcelsior globe and angle valves. Opening the vent valve until liquid or vapor stops venting indicates it is safe to disconnect.All brass versions have knurled stems that completely unscrew from the valve making the stems replaceable. The stainless steelversion has a t-handle stem that is non-removable.The Low Emission Vent Valve and the Self-Cleaning Low Emission Vent Valve reduce emissions by 70 Percent during normalcontainer filling operations. The Self-Cleaning Low Emission Vent Valve cleans out the orifice hole each time it is operated. Thehole is cleaned out with a #54 orifice drill that reams the valve’s orifice hole each time the adjusting screw is loosened or tightened,eliminating nuisance orifice clogging. The reduced venting emissions is achieved by forcing product to pass between the #54orifice hole and the flutes of the captured self-cleaning apparatus. The self-cleaning replacement screw (MEJ401SC) is compatiblewith all existing standard vent valve bodies allowing a standard vent valve to be converted into a self-cleaning low emission ventvalve without reinstalling the valve body.Part No.The Standard Vent Valve has a #54 orifice with no self-cleaning apparatus.The Low Emission Vent Valve has a #72 orifice.Vent Valve Features• 70% emission reduction with our Self-Cleaningand Low Emission vent valves• 1/4” MNPT Connection• Available with dip tubes. See fixed maximumliquid level gaugesSelf-CleaningTypeLow Emission#72 OrificeSelf-CleaningLow Emission#54 OrificeStandard#54 OrificeCaptured StemStandard#54 Orifice90° Elbow w/HydrostaticRelief90° Elbow1/4” MPT x 1/4”M. FlareBrassBrassReplacementStemsStainlessSteel*MEJ400/72 MEJ401 —MEJ400SC MEJ401SC —MEJ400MEJ401MEJ401SCMEJ402SMEJ400C — —MEJ602H***MEJ606* Rated for LP-Gas & NH 3** With Bleeder Valve*** Factory Installed Vent ValveMEJ400MEJ401MEJ401SCMEJ400MEJ401MEJ401SC——MEJ602HMEJ400SCPatent PendingMEJ400/72MEJ402SMEJ606MEJ401MEJ401SCPatent PendingSelf-CleaningMEJ400- 76 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Fixed Maximum Liquid Level GaugesDesigned to provide a way to visually determine that a tank has reached maximum allowable fill capacity. The dip tube end of afixed liquid level gauge should be set equal to 80% of the liquid level tank capacity and installed in the vapor space of the tank.The vent valve should be opened before filling begins during which time vapor will be discharged. Once the tank reaches maximumliquid fill capacity (80% of tank capacity), liquid will begin to discharge from the vent valve telling the operator the tank hasreached maximum allowable fill capacity and the filling operation should cease immediately.Marshall Excelsior is the leader in low emission products. For information on the low emission vent valves offered on the fixedliquid level gauges, please visit our vent valve section.TypeLow Emission#72 OrificeSelf-CleaningLow Emission#54 Orifice5.4”Tube LengthBrass5.7”Tube LengthBrass6.6”Tube LengthBrassPart No.6.9”Tube LengthBrass12”Tube LengthBrass12”Tube LengthStainless Steel*MEJ410/72-5.4 MEJ410/72-5.7 MEJ410/72-6.6 MEJ410/72-6.9 MEJ410/72-120 —MEJ410SC-5.4 MEJ410SC-5.7 MEJ410SC-6.6 MEJ410SC-6.9 MEJ410SC-120 —#54 Orifice MEJ410-5.4 MEJ410-5.7 MEJ410-6.6 MEJ410-6.9 MEJ410-120 MEJ402S-120Captured Stem#54 OrificeMEJ410C-5.4 MEJ410C-5.7 MEJ410C-6.6 MEJ410C-6.9 MEJ410C-120 —* Rated for LP-Gas & NH 3Y-StrainersDesigned for flow in one direction to guard against debris in pipelines that couldcause damage to pumps, valves or other equipment. Can be installedhorizontally or vertically. They are available in three stainless steel mesh sizes.The mesh size equals the number of holes per square inch i.e. the smaller thenumber the larger the holes.ME653SA shutoff valve installed on the filter basket outlet allows for convenientblow-off cleaning of Y-Strainer while under pressure.Y-Strainer Features• Durable ductile iron body with automotive gradepowder coat finish• Rated 600 PSI / WOG• Optional factory installed plug• Designed for LP-Gas or NH 3Part No.Inlet &Blow-Off20 Mesh 40 Mesh 80 MeshOutletPlug SizeScreen Screen ScreenFNPTME650S/20 ME650S ME650S/80 1/2” 1/2”ME651S/20 ME651S ME651S/80 1/2” 3/4”ME652S/20 ME652S ME652S/80 3/4” 1”ME653S/20 ME653S ME653S/80 3/4” 1-1/4”— ME654S — 1” 1-1/2”ME655S/20 ME655S ME655S/80 1” 2”— ME656S ME656S/80 1-1/4” 3”To add a factory installed plug use a “P” after the prefixnumber i.e. ME650SP/20CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 77 -

Pipeaway AdapterDesigned to be installed between semi-internal pressure relief valves and vent stacks orat any point in plant plumbing where breakaway protection is needed. This plated steeladapter has a weak section to help protect the relief valve if vent stack is damaged or tohelp protect plant plumbing from catastrophic failure.Part No. Inlet & OutletMEP104-243” FNPTFor LP-Gas& NH 3Clamp Style Hose CouplingsThese hose couplings are user friendly and can be easily installed in the field. A steel or ductile hose barb is inserted into the hoseand two outer clamps, positioned on the outside of the hose, have a boss to keep the bolts from rotating while the clamps compressthe hose for a leak free seal.Note: Clamps must be installed with clamp lip fully engaged into flange groove on hose barb body.ME3162-32BME3162-32SME3162-20Part No. Hose Barb Outlet MNPTClamp Style Hose Coupling Features• Hose barbs constructed of zinc plated steel or ductile iron withautomotive grade powder coat finish• All hose clamps are ductile iron with automotive grade powdercoat finish• Optional integrated female Acme swivel eliminates weight ofadditional couplings• Includes hose barb and two clamps, nuts and boltsME3162-08 1/2” 1/2”ME3162-12 3/4” 3/4”ME3162-12S 3/4” 1-3/4” F. Acme SteelME3162-1216 3/4” 1”ME3162-16 1” 1”ME3162-16S 1” 1-3/4” F. Acme SteelME3162-1612 1” 1-1/4”ME3162-2016 1-1/4” 1”ME3162-20 1-1/4” 1-1/4”ME3162-2018S 1-1/4” 1-3/4” F. Acme SteelME3162-2020S 1-1/4” 2/1/4” F. Acme SteelME3162-24 1-1/2” 1-1/2”ME3162-32 2” 2”ME3162-32B* 2” 3-1/4” F. Acme BrassME3162-32S 2” 3-1/4” F. Acme Steel* Rated for LP-Gas- 78 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Sight Flow Swing Check ValvesDesigned with the most durable, impact resistant glass in the industry. This sight flow valve allows bulk plant operators aninspection point to visually monitor liquid flow conditions which allows the operator to achievemaximum pump efficiency. Also features a soft seat swing away check valve which limits flow to onedirection. This check valve is usually closed until pressure activates the valve when flow isdirected into piping or containers causing the valve to open. When flow stops or reverses,the check returns to the closed position minimizing product loss in the event of a line failure.Installing a sight flow valve upstream of a plant pump, allows the operator to observeproduct flow and make pump adjustments for maximum flow without the liquidforming vapor bubbles causing uneven flow patterns and significantly reducingefficiency. Additionally, installing a sight flow valve at the loading arm of a plantallows the operator to maintain consistent observation of pump conditions. This valveis suitable for stationary and mobile applications.Installing this valve on a compressor operation will provide a visual indication of when the tankcar or transport is emptied of liquid and ready for vapor recovery.Sight Flow Features• Specially formulated, large diameter impact resistant sight glasswith O-ring packing seals for maximum safety and visibility• Durable ductile iron body with cadmium plated finish• All steel and stainless steel construction• Rated up to 400 PSI / WOG• Hexagon cast ends for ease of installationFor LP-Gas& NH 3Part No.ASME Tank Filler ValvesDesigned to allow maximum product transfer with its manually operated open throat design. Thesevalves have an integral high flow primary soft-seat back check and a manually operated secondaryshutoff valve for maximum protection against leaks. Because these valves provide a manuallyoperated shutoff device, the need for a flow restricting fill check adapter has been eliminated.Inlet&OutletFNPTSealMaterialOALME875S-16 2” Nitrile 5-3/4”ME875SN-16 2” Neoprene 5-3/4”ME875SV-16 2” Viton ® 5-3/4”ME875S-24 3” Nitrile 7-3/8”ME875SN-24 3” Neoprene 7-3/8”ME875SV-24 3” Viton ® 7-3/8”Viton ® is a trademark of DuPont Performance Elastomers.ME600-10ASME Tank Filler Valve Features• Allows 25-50% more product flow during filling operations• Manual valve portion assures operator when valve is open or closed• Removable key provided to help prevent tampering• Constructed with a durable Nitrile O-ringprimary back check seal and reliable Teflon ®packing for secondary manual valve seal• Durable all brass construction for maximumweather and spark resistanceTeflon ® is a trademark of DuPont CompanyPart No.Filler ValveMNPTHose End M. AcmeConnectionProtective CapIncludedAdditionalKeysME600-6* 3/4” 1-3/4” Yes ME578-02ME600-10* 1-1/4” 1-3/4” Yes ME578-02ME601-6 3/4” 1-3/4” Yes —ME601-10 1-1/4” 1-3/4” Yes —*Manual ShutoffPatent PendingCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 79 -

Breakaway CouplingsDesigned to provide a safe way to transfer LP-Gas and NH 3without sacrificing flow. The FloKill TMBreakaway Coupling flowsboth directions and protects against expensive loss of product or equipment damage if a pull-away occurs during a transferoperation. One end of the breakaway coupling should be attached to a fixed or sturdy point. In the event of an excessive amountof pull force, the breakaway coupling will separate and immediately shutoff product flow in both directions.To reconnect the valve, pressure needs to be relieved from both ends of the line, therefore it is recommended that a safe way tobleed down the line is provided upstream and downstream. After the lines have been depressurized use Marshall Excelsior’sre-installation tool (MEP128-6) for 3/4” or slide the male end into the female side and pull the collar back until they lock. Afterreconnection the line must be tested using Marshall Excelsior Leak Detector to check for leaks before any product is transferred.The breakaway coupling may be used on vapor or liquid lines on transports, delivery trucks, motor fuel containers, fill cabinets andother miscellaneous filling operations.Note: It is recommended that breakaway couplings be safety tested monthly to confirm that proper separation occurs in the eventof a pull-away. Dry air is suggested for a source of pressure during testing.FloKill TMBreakaway Coupling Features• Nitrile soft seat provides positive shutoff bothupstream and downstream of source• 100—300 lbs of force required for disconnect• Approximately 100 lbs of force to reconnect• Large internal bore for increased flow• Durable plated steel constructionME860S-6• Rated for LP-Gas & NH 3ME861S-6MEP128-6Coupling Not IncludedBracketStylePart No.LanyardStyleConnectionFNPTOALLengthAccessoryReassemblyToolME860S-6 ME861S-6 3/4” 6” MEP128-6ME860S-8 ME861S-8 1” 6-3/4” —ME860S-10 ME861S-10 1-1/4” 7-3/4” —- 80 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Filler & Vapor CouplingsThese couplings are used as connections between the hose and transfer valve. The filler coupling is designed to provide differentconnections for the end of a hose (inlet) or an angle, globe or quick acting valve (outlet) when transferring liquid. The vaporcoupling is designed to be used with valves having an upper check mechanism. The nose piece on the vapor coupling opens thecheck valve allowing vapor equalization.The extended style has a stainless steel female Acme nut insert cast into the heavy duty aluminum handle. All filler and vaporcouplings come with a factory installed retaining ring unless noted. The retaining ring limits the travel of the handle or nut duringdisconnect reducing spin-offs and promoting proper venting of the captured product.KnurledNutME130SME110ME130AFillerCouplingVaporCouplingME150Wing NutHeavy DutyAluminum StandardHandleExtended StylesServiceTypeLiquidVaporKnurledNutBrassWing NutBrass WingNut/SteelNipplePart No.KnurledNutWingNutSteel*Extended HandleStandardFlutedF.AcmeMNPTME100 — — — — — — 1-1/4” 3/8”ME101 — — — — — — 1-1/4” 1/2”ME110 ME110C — — — ME635-4 ME635G-4 1-3/4” 1/2”ME111 ME111C — ME111S ME111SC ME635-6 ME635G-6 1-3/4” 3/4”— — — — ME113SC — — 1-3/4”ME112 ME112C — ME112S ME112SC ME635-8 ME635G-8 1-3/4” 1”3/4”FNPT— — — — — ME635-10 ME635G-10 1-3/4” 1-1/4”——ME120**ME120WRME130B**ME130BWRME120S**ME120SWRME130**ME130A***ME130WR——ME121S**ME121SWRME130S**ME130SWR— — 2-1/4” 1-1/4”— — 3-1/4” 2”ME140 — — — — — — 1-1/4” 3/8”ME141 — — ME141S — — — 1-1/4” 1/2”— — — — — ME646-4 ME646G-4 1-3/4” 1/2”ME150 ME150C — ME150S ME150SC ME646-6 ME646G-6 1-3/4” 3/4”ME151 ME151C — ME151S ME151SC ME646-8 ME646G-8 1-3/4” 1”— — — — — ME646-10 ME646G-10 1-3/4” 1-1/4”— — ME160 — ME160S — — 2-1/4” 1-1/4”ME635SeriesHeavy DutyAluminumFluted HandleME635GSeries* Rated for LP-Gas & NH 3** Does not include a factory installed retaining ring*** Includes factory installed filter screenME635-8-03 Replacement retaining ring for ME635-8CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 81 -

Acme AdaptersPart No.No ScreenBrassFactoryInstalledScreenSteel*M. Acme FNPT MNPTME498-4/2 — — 1-1/4” 1/4” 1/2” **ME498-6/3 — — 1-1/4” 3/8” 3/4” **ME192 — — 1-1/4” 1/2” —ME193 — — 1-1/4” 3/4” —ME210 — — 1-3/4” 1/4” —ME211 — — 1-3/4” 3/8” —ME212 — — 1-3/4” 1/2” —ME213 — ME213S 1-3/4” 3/4” —ME214 — ME214S 1-3/4” 1” —ME502-12/8 — — 2-1/4” 1” 1-1/2” **ME502-16/10 — ME502S16/10 2-1/4” 1-1/4” 2” **ME502-16/12 — — 2-1/4” 1-1/2” 2” **ME250 ME250A — 3-1/4” 1-1/4” —ME251 ME251A — 3-1/4” 1-1/2” —ME252-16 ME252A-16 ME252S-16 3-1/4” 2” —ME508-24 ME508A-24 ME508S-24 3-1/4” 3” —* Rated for LP-Gas & NH 3** Male Thread Outside & Female Thread InsideME192ME212ME252S-161/4” FNPT with VentValve & #54 OrificeME503J-16Brass Vent ValveME503JB-16Stainless SteelVent ValveME503JS-16Part No.BrassSteel*FNPT/Factory Factory Factory FactoryFactory M. AcmeFactoryMNPTMachined Installed Installed StainlessSteel Vent 1/4” FNPTStainless SteelMachinedInstalledInstalled Brass1/4” FNPT Brass VentVent Valvewith Vent Hole Valve Valve with Vent HoleVent ValveME252J-16 ME252JB-16 ME252JS-16 ME252SJ-16 ME252SJB-16 ME252SJS-16 3-1/4” 2” FNPTME503J-16 ME503JB-16 ME503JS-16 ME503SJ-16 ME503SJB-16 ME503SJS-16 3-1/4” 2” MNPTTo add a factory installed screen use an “A” after the prefix number i.e. ME252AJB-16* Rated for LP-Gas & NH 3- 82 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Acme AdaptersPart No. M.Part No.BrassM.MNPT FNPTFactory Steel * AcmeNo Screen InstalledME215SScreenME498-4/2 — — 1-1/4” 1/2” 1/4” **ME498-6/3 — — 1-1/4” 3/4” 3/8” **— — ME520S-8 1-1/4” 1” —— — ME521S-4 1-3/4” 1/2” —ME215 — ME215S 1-3/4” 3/4” —ME216 — ME216S 1-3/4” 1” —ME503-16ME217 ME217A ME217S 1-3/4” 1-1/4” —ME233 — ME233S 2-1/4” 1-1/4” —ME502-12/8 — — 2-1/4” 1-1/2” 1” **Acme AdapterME502-16/10 — ME502S16/10 2-1/4” 2” 1-1/4” **with ScreenME277 ME277S 3-1/4” 3-1/4”* Rated for LP-Gas & NH 3ME502-16/12 — — 2-1/4” 2” 1-1/2” **ME503-16 ME503A-16 ME503S-16 3-1/4” 2” —ME503-20 ME503A-20 — 3-1/4” 2-1/2” —ME262 ME262A ME262S 3-1/4” 3” —* Rated for LP-Gas & NH 3** Male Thread Outside & Female Thread InsidePart No. M. M.Brass Steel *Acme AcmeFemale* Rated for LP-Gas & NH 3ME270 — 1-1/4” 1-1/4”Brass Steel*Acme UNC ThreadME273 ME273S 1-3/4” 1-3/4”ME209 ME209S 1-3/4” 3/8”-16ME275 ME275S 2-1/4” 2-1/4”To hold hose end valve secure when not in useAcme Reducer CouplingsME442Part No.F. Acme M. AcmeBrass Steel *ME611 ME611S 2-1/4” 1-3/4”ME612 ME612S 3-1/4” 1-3/4”ME614 — 3-1/4” 2-1/4”ME442 — 3-1/4” 1-1/4” FNPTME612S* Rated for LP-Gas & NH 3CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 83 -

Acme CapsPin HoleKnobME229-EL1-3/4” F. Acmex 1/2” MaleFlare 90°ME229ME441RSTapped HoleME441FS-1CCable IncludedME441F-1Chain IncludedPart No.AccessoryCapOnlyBrass Steel *Cap withChainCap withCableCap OnlyCap withChainCap withCableF.AcmeStyleChainOnly**ME229 ME229-1 — ME229S ME229S-1 — 1-3/4” Pin Hole MEP148 —ME229F ME229F-1 ME229F-1C ME229FS ME229FS-1 ME229FS-1C 1-3/4” Knob MEP167 MEP168ME431F ME431F-1 — ME431FS ME431FS-1 — 2-1/4” Knob MEP167 MEP168ME431R ME431R-1 — — — — 2-1/4” Tapped Hole MEP167 MEP168ME441F ME441F-1 ME441F-1C ME441FS ME441FS-1 ME441FS-1C 3-1/4” Knob MEP167 MEP168ME441R ME441R-1 — ME441RS ME441RS-1 — 3-1/4” Tapped Hole MEP167 MEP168CableOnly* Rated for LP-Gas & NH 3Part No.AccessoryCap OnlyPlasticCap with ChainF. Acme StyleChainOnly**ME106ME108 ME108-1 1-1/4” Pin Hole MEP147ME109 orME109-NH3*ME109-1 orME109-NH3-1*1-3/4” Pin Hole MEP148ME106 ME106-1 3-1/4” Pin Hole MEP183* Rated for NH 3ME109-NH3Universal Relief Valve CoversThese covers are intended to protect both internal & external relief valves ranging in size from 1/2” to 1-1/4” NPT from moistureand/or other possible contaminants. Using the universal “shower cap” style relief valve covers will allow technicians to carrytwo sizes that will protect the majority of domestic tank relief valves.Universal Relief Valve Cover• Made with durable UV stable yellow vinyl material• Fits 1/2” to 1-1/4” NPT internal and external relief valvesPart No. Description MaterialMEH502 Adjustable Relief Valve Cover 1/2” to 3/4” Yellow VinylMEH503 Adjustable Relief Valve Cover 3/4” to 1-1/4” Yellow VinylMEH502MEH503- 84 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Acme Caps with FlangeThe flange allows for easy operation of pneumatic or proximityinterlock switches which control the safety systems of transport vehicles.The stainless steel flange is flush mounted to the Acme cap.FlangeME441F8Part No.AccessoryBrass Steel *F.FlangeStyleCap with Cap withCap with Cap with AcmeDiameter Chain CableCap withCap withFlange & Flange &Flange & Flange &Only OnlyFlangeFlangeChain CableChain CableME229F5 ME229F5-1 ME229F5-1C ME229FS5 ME229FS5-1 ME229FS5-1C 1-3/4” Knob 5” MEP167 MEP168ME441F8 ME441F8-1 ME441F8-1C ME441FS8 ME441FS8-1 ME441FS8-1C 3-1/4” Knob 8” MEP167 MEP168ME441R8 ME441R8-1 — — — — 3-1/4” Tapped Hole 8” MEP167 MEP168Heavy Duty Acme Spanner WrenchAluminum Acme spanner wrench for 1-3/4”,2-1/4”, 3-1/4” and 4-1/4” female Acme caps.Acme cap soldseparatelyMEP120BPart No. LengthMEP120B 17-1/2”Acme Dust PlugsPart No.PlugOnlyAluminum Brass PlasticChainOnly*Plug withChainPlug OnlyChainOnly*Plug withChainPlugOnlyChainOnly*Plug withChainM.Acme— — — ME178B MEP148 ME178B-1 ME178 MEP147 ME178-1 1-1/4”ME239 MEP148 ME239-1 ME179B MEP148 ME179B-1 ME179 MEP148 ME179-1 1-3/4”— — — ME180B MEP167 ME180B-1 ME180 MEP148 ME180-1 2-1/4”— — — ME181B MEP167 ME181B-1 ME181 MEP183 ME181-1 3-1/4”ME181B* MEP147 ring fits over 3/4” MNPT—MEP148 ring fits over 1-1/4” MNPTME179CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 85 -

Wheel ChockDesigned with a “Double Grip” handle for easy carrying and dual traction grips for the roadand tire. The aluminum material makes the wheel chock lightweight and able to withstandthe toughest environments. Turn the wheel chock upside down and the points on top of thewheel chock will dig into the snow, ice and mud to prevent sliding. Durable safety yellowPart No. Height Length WidthME200 7” 10” 7”Wheel Chock BracketDesigned to provide a durable and convenient receptacle to storewheel chocks during over-the-road transit. Durable aluminumconstruction and molded inserts prevent damage to wheel chocks.For installations that require additional mounting clearance astandoff extension kit is available.Part No. Height Length DepthWheel ChocksIncludedME200B 7-3/4” 20” 7” NoME200BK 9-3/4” 20” 8” YesAccessoryStandoffExtension KitME200EXTME200BKUniversal Spring Loaded Utility BracketProvides a safe and secure method to mount and retain hand tools such as shovels, picks, broomsor other equipment for bobtail or utility vehicles during over the road transit.Universal Spring Loaded Utility Bracket Features• Cast aluminum body for maximum durability• Vinyl coated for maximum security• All stainless steel spring and mounting hardwarePart No.MEP082DescriptionUniversal Spring Loaded Utility BracketMEP082- 86 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Part No.MEJ502DialDiameterProbeLengthMEJ700 2” 4”MEJ701 2” 6”MEJ702 3” 4”MEJ703 Bottom Mount 3” 6”MEJ501 MEJ511 0-30 2” DryME50ECO-2 — 0-30” WC 2-1/2” DryMEJ502 MEJ512 0-60 2” DryMEJ503 MEJ513 0-100 2” DryMEJ504 — 0-160 2” DryMEJ505 — 0-200 2” DryMEJ513MEJ600-02 MEJ516 0-300 2” DryDesigned for use in LP-Gas or NH 3storage tanks, nurse tanks,bobtails MEJ603HP-01* and transports. These — stainless 0-300 steel, 2-1/2” dust and Glycerin waterproof thermometers MEJ580*** feature — a 1/2” MNPT 0-300 connection 4” with Dry atemperature MEJ542** range from –40°— to +120° 0-400 Fahrenheit. 2-1/2” Accuracy Glycerin+/- 1 percent full — range. MEJ524* 0-400 2-1/2” GlycerinMEJ552* MEJ526** 0-400 2-1/2” Glycerin* Brass Pipe Thread; Stainless Steel Dial** Stainless Steel Gauge *** Plated Steel GaugeContainer ThermometersMEJ542Pressure GaugesPressure Gauge Protective BootDesigned to measure the pressure of gas or liquid. Marshall Excelsior offers two types of gauges, dry and glycerin filled. Thedry gauge is the most commonly used and least expensive gauge. With a glycerin filled gauge, the life of the gauge is extended,vibration Designed of to the fit pointer over the is minimized pressure gauge and condensation, dial to extend caused the by humid air inside the gauge, is eliminated.To life determine and accuracy the of correct dry and gauge, liquid environment pressure gauges. along This with normalProtectiveoperating boot helps system protect pressure the dry must pressure be considered. gauge’s fragile The pressure internal range of thePart No.Boot Dialgauge components should and be twice helps the prevent normal dents system on liquid pressure pressure to maximize gauges gauge life 1/4” MNPT 1/4” MNPTPSIGFill TypeSizeand which accuracy. cause the gauge to leak.Bottom Mount Back MountMEJ520 — 0-5 2-1/2” DryPart No.FitsMEJ500 MEJ510 0-15 2” DryMEJ2.5GB 2-1/2” Dial, Bottom Mount Pressure GaugeMEJ603LP-01* — 0-15 2-1/2” GlycerinBack MountGauge soldMEJ501 separately MEJ511 0-30 2” DryME50ECO-2 — 0-30” WC 2-1/2” DryMEJ502 MEJ512 0-60 2” DryMEJ503 MEJ513 0-100 2” DryMEJ504 — 0-160 2” DryMEJ502MEJ513MEJ505 — 0-200 2” DryMEJ600-02 MEJ516 0-300 2” DryMEJ603HP-01* — 0-300 2-1/2” GlycerinMEJ580*** — 0-300 4” DryMEJ542** — 0-400 2-1/2” Glycerin— MEJ524* 0-400 2-1/2” GlycerinMEJ552* MEJ526** 0-400 2-1/2” GlycerinBottom Mount* Brass Pipe Thread; Stainless Steel DialMEJ542** Stainless Steel Gauge *** Plated Steel GaugePressure Gauge Protective BootDesigned to fit over the pressure gauge dial to extend thelife and accuracy of dry and liquid pressure gauges. Thisboot helps protect the dry pressure gauge’s fragile internalcomponents and helps prevent dents on liquid pressure gaugeswhich cause the gauge to leak.ProtectiveBootPart No.MEJ2.5GBFits2-1/2” Dial, Bottom Mount Pressure GaugeGauge soldseparatelyCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 87 -

Pressure Gauge Snubbersover pressurize or damage the gauge while maintaining a quick response time and a steady reading.Part No. Material StyleInlet(MNPT)Outlet(FNPT)ME202 Brass 1/4” 1/4”ME202SS Stainless Steel 1/4” 1/4”ME204BrassSintered MetalFilter Disc1/4” 1/4”ME202SSME204Serviceman’s Replacement Seal KitDesigned to provide a convenient storage system for all common LP-Gas and NH 3gaskets and O-rings. Perfect for dispensercabinets or bobtail and transport drivers.Serviceman’s Replacement Seal Kit Features• Durable ABS plastic container with storage latch• Preformed insert with individual spaces for each gasket/O-ring size• Labeled with each gasket/O-ring size and part number for easy• All gaskets/O-rings manufactured fromfor LP-Gas and NH 3servicesapproved compoundsMEW1MEW1—Serviceman’sReplacement Seal Kit Includes:QtyReplacementPart No.1-1/4” Acme Motor Fuel Flat Gasket 9 R7141M-31-1/4” Acme Flat Gasket 10 1E81221-3/4” Acme Flat Gasket 10 1E81242-1/4” Acme Flat Gasket 10 1E81263-1/4” Acme Flat Gasket 10 1E8128Male Motor Fuel Connector O-ring 12 T11673POL O-ring 12 T12945MEW1Layout- 88 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Hose Reel Control Switch CoversThese covers are intended to protect Hannay® Hose Reel Control Switches from moisture and/or other contaminants during overthe-roadtransit. The MEP-GMC1 is specifically designed to fit Hannay® Guidemaster® control switches while the MEP-RDC1 isspecifically designed to fit Hannay® red DOT EPS style control switches. Both of these covers fit snuggly over the control to helpprevent damage due to moisture or other contaminants thereby increasing the longevity of the control switch.MEP-GMC1Switch Cover Features:• Made with durable UV stable black low temperature EPDM material• Includes security lanyard to help prevent loss of the cap• Fits Hannay® Guidemaster® and red DOT EPS switches• Control switch can be operated through cover without removingPart No. Description MaterialMEP-GMC1 Hose Reel Control Switch Cover for Guidemaster® Control Arm Black EPDMMEP-RDC1 Hose Reel Control Switch Cover for Red DOT EPS Black EPDM* “Hannay®” and “Guidemaster®” are trademarks of Hannay ReelsMEP-RDC1Needle ValvesIntended for application where precise control of gas output is required. These precision machined valves offer a wide range ofadjustment without stem galling. Perfect for isolating pressure gauges from bulk storage containers or upstream shutoff valves fortorches and/ or outdoor burner applications.Needle Valve Features:• Available in brass, plated steel & stainless steel construction• Tapered valve body seat & stem for precision accuracy• Various inlet / outlet configurations available• ME831 & ME834 series valves approved for bi-directional flowME831SPart No. Description MaterialME831 Needle Valve 1/4” MNPT x 1/4” FNPT BrassME832 Needle Valve 1/4” MNPT Outlet x #80 Orifice 1”- 20 F. Inlet BrassME833 Needle Valve 1/4” MNPT Outlet x 1”- 20 F. Inlet BrassME834 Needle Valve 1/4” MNPT x 9/16” -18 LH Male BrassME831S Needle Valve 1/4” MNPT x 9/16” -18 LH Male Plated SteelME831SS Needle Valve 1/4” MNPT x 1/4” FNPT Stainless SteelME832CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 89 -

ASME/ DOT Container Service ValvesIntended for use in vapor withdrawal service for ASME and DOT containers or as fuel line shutoff valves.Note: These valves do not incorporate an integral pressure relief valve and are intended for use in containers that have a separatestand alone pressure relief valve sized to properly handle the container’s capacity.ASME/ DOT Container Service Valves Features• One piece forged brass body construction• Dual O-ring packing design• Easy to repair / replace bonnet assembly• Universal bonnet assembly• Industry best fill flow rate• Factory applied thread sealant• Heavy duty replaceable zinc hand wheelME9101C1ME9101D-11.7Part No. Description Dip Tube LengthME9101C1 3/4” MNPT X F. POL ASME/ DOT Service Valve (No Dip Tube) N/AME9101D-11.1 3/4” MNPT X F. POL ASME/ DOT Service Valve (with Dip Tube) 11.1”ME9101D-11.7 3/4” MNPT X F. POL ASME/ DOT Service Valve (with Dip Tube) 11.7”Double Check Fill ValvesDesigned for DOT forklift, engine fuel and ASME residential tanks, these double check filler valves automatically open with pumppressure providing maximum product flow rates. Once flow ceases, both upper and lower check mechanisms close to preventproduct loss from the container. The lower check serves as a secondary seat to limit product loss in the event that the primary upperseat fails to operate properly due to damage.Double Check Fill Valve Features• Industry best flow rate• Resilient bonded main valve seal• Integral break away feature leaves primary checkintact in the event of delivery truck roll away• Field repairable upper check seat• Factory applied thread sealantME601-6ME601-10Part No.DescriptionFlow Rate LPG10 PSI 20 PSIAccessoriesCap & LanyardME601-6 1-3/4” M. Acme x 3/4” MNPT Double Fill Valve w/ Cap & Lanyard 11 24 ME601-902ME601-10 1-3/4” M. Acme x 1-1/4” MNPT Double Fill Valve w/ Cap & Lanyard 22 36 ME601-902- 90 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Forklift Cylinder & Engine Fuel ValvesIntended for vapor or liquid withdrawal service on DOT forklift or engine fuel containers. Two closing flow rates are offered -1.5 GPM for medium to light duty vehicles and 2.6 GPM for those with greater fuel demands.Note: These valves do not incorporate an integral pressure relief valve and are intended for use in containers that have a separatepressure relief valve to adequately handle the container’s capacity. Each of these valves incorporate an excess flow valve at thetanks inlet end to prevent excessive product loss in the event of a downstream fuel line failure. For the excess flow device toperform properly the service valve must be in the full open and back seated position.Forklift Cylinder & Engine Fuel Valve Features• One piece forged brass body construction• Dual O-ring packing design• Easy to repair / replace bonnet assembly• Universal bonnet assembly• Industry best fill flow rate• Factory applied thread sealant• Replaceable, heavy duty zinc hand wheel featuring a universal designPart No.DescriptionExcess FlowGPMME9101P5 3/4” MNPT X 3/8” MNPT Forklift Service Valve 1.6 GPMME9101P5H 3/4” MNPT X 3/8” MNPT Forklift Service Valve 2.6 GPMME9101H4 3/4” MNPT X 3/8” M. Flare Motor Fuel Service Valve 1.6 GPMME9101H6 3/4” MNPT X 3/8” M. Flare Motor Fuel Service Valve 2.6 GPMME9101P5HME9101C5 3/4” MNPT X F. POL ASME/ DOT Container Service Valve 2.6 GPMEngine Fuel Remote Fill ValveSpecifically designed for remote filling applications where a standard tank type filler valve is not practical. Perfectly suitedfor motor fuel applications or other hard to reach remote tank applications. This single check fill valve is designed to providemaximum product fill rates along with an automatic shutoff once product flow ceases.Engine Fuel Remote Fill Valve Features• Single check design allows maximum product flow rate• Integral break away feature leaves check valve intact in the event of avehicle roll away during filling• Resilient bonded main valve seal• Rear bulkhead mounting with quarter panel jam nut and lock washer• Single piece main valve body for maximum strength and durabilityME602-8Part No.DescriptionAccessoriesCap & LanyardME602-8 1-3/4” M. Acme x 1/2” M. Flare Remote Fill Valve w/ Cap & Lanyard ME601-902CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 91 -

Engine Fuel Filler Valves & ConnectorsThe CGA 790 quick closing couplings (ME220 Series) are designed to join the carburetion fuel line to the service valve on motorfuel type applications. The Acme threads allow for quick and repeated removal and connection with minimal product loss. TheME220M connects directly to the service valve outlet, while the ME220F Series connects to the motor fuel line. Both couplingshave an internal safety check assembly that opens when the two are connected together. Spring force and pressure close bothchecks when disconnected to provide a leak free seal. The ME220M will fit any refill adapter on the market.The ME790 Series is designed to provide a fast and reliable connection for filling motor fuel cylinders through the 1-1/4” maleAcme service valve connector.The Moto-Seal Low Emission Connector (ME220FSN) and Filler Valve (ME790SN) are the industry’s leader in reducingproduct emissions without sacrificing flow emitting less than .3 CC during disconnect. The replaceable sealing tip allows thevalve to make a bottom face seal when coupled with any mating motor fuel cylinder valve connector.ME790SNME220FSNMoto-SealReplaceable Tip(ME795-3-02)Patent PendingEngine Fuel Valves & Connectors• Knurled body on the fuel line connector and filler valve allows for an easyhand tight connection even under tank pressure• Works in conjunction with all mating forklift connectors and filler valves• ME220F series has a durable riveted valve stem, chrome plated body andwrench flats for easy installation• ME220M has two seals—an O-ring to minimize product loss during connectionand a gasket to seal the two connectors during filling operations• Moto-Seal connector and filler offers• Replaceable tip for maximum service life• Positive seal every time with less than .3 CC product loss at disconnect• 3 layers of security against possible leaks or connection failures whenthe O-ring and flat gasket are intact on the male connectorME220FPart No.Moto-SealPart No.Inlet Outlet ApplicationProtectiveBrass CapME220F ME220FSN 1-1/4” Female Acme 1/4” FNPT Fuel Line —ME220M — 3/8” FNPT 1-1/4” Female Acme Service Valve ME220FPME220MME790 ME790SN 1-1/4” Female Acme 1/4” MNPT Filler Valve —- 92 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Vapor Service Engine Fuel Valves & ConnectorsThese CGA 789 quick closing couplings are designed for use with vapor service motor fuel applications.Incorporates all the same features as the standard and Moto-Seal motor fuel filler valves andconnectors. The left hand Acme thread allows service on outdoor motor fuel propaneequipment including lawn mowers, etc.ME220MLMoto-SealReplaceable Tip(ME795-3-02)ME790LSNPart No.Moto-SealPart No.Inlet Outlet ApplicationProtectiveBrass CapME220FL ME220FLSN 1-1/4” Female Left Hand Acme 1/4” FNPT Fuel Line —ME220ML — 3/8” FNPT 1-1/4” Female Left Hand Acme Service Valve ME220FLPME790L ME790LSN 1-1/4” Female Left Hand Acme 1/4” MNPT Filler Valve —ME220FLSNEngine Fuel Bulkheads & WrenchThese bulkheads provide astationary point for motor fuellines to pass thru sections ofsheet metal.MET444This heavy duty designed wrenchfeatures a 1/2” drive socket extensionfor removing and installing motorfuel cylinder valvesPart No. Connection ConnectionMET443 3/8” Male Flare 1/4” FNPT (2 Ports)MET444 3/4”-16 Male / 1/4” FNPT 1/4” FNPT (2 Ports)MET445 3/4”-16 Male / 1/4” FNPT 1/4” FNPT (3 Ports)MET443MEP125Carburetion Filter & FittingsThe gas/air filter is used to filter foreign materials and/orparticles from LP-Gas systems such as motor fuel/carburetionsystems. Also designed to be used to filter air supply lines forinternal and emergency shutoff valve actuator systems.ME709Allows connection of a motorfuel service line from 1-3/4”female Acme vapor outlet.ME229-EL90° AngleEnables the installation of a 1/4” MNPT hydrostatic relief valvein a safe, protected area. This two piece carburetion hose fittingfits all stainless steel braided LP-Gas hose with a 5/16” ID. Thetank valve side has a 3/8” female flare swivel and zinc plated formaximum corrosion resistance.ME8346Part No. Inlet Outlet Side PortME709 1/4” FNPT 1/4” MNPT —ME229-EL 1-3/4” F. Acme 1/2” Male Flare —ME8346 5/16” ID 3/8” Female Flare 1/4” FNPTCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 93 -

Type I (QCC) Quick Filler CouplingDesigned to provide a fast, reliable connection for filling cylinders with Type I (QCC) style valves.The snap on/snap off design is intended to reduce labor and repetitive motion associated with threadedtype filler couplings. This easy to operate filler coupling is durable, lightweight and will withstandthe harshest working conditions while reducing cylinder valve thread wear. Note: A quick closingshutoff valve must be used with this coupling.Type I (QCC) Quick Filler Coupling Features• Durable glass filled nylon handle• Easy to use snap on/snap off action for quick fill operation• All stainless steel internal components• Large bore stainless steel stem for increased flow• Right or left hand operation• Universal filler connection for all Type I (QCC) service valvesPart No. Inlet OutletME7961/4” MNPTPatent PendingME791CJNot Included1-5/16” FemaleAcme QuickConnectType I (QCC) Filler Couplings & AdaptersThese full size Type I (QCC) filler couplings make filling DOT propane cylinders with a QCC connection quick and easy. Just afew turns allows the filler to attach and remove the coupling with minimal effort and loss of product. A longer body allows the fillercoupling handle to remain outside the fixed collar of a cylinder. Can be used on a manual, electric or hydraulic system. In a manualsystem a shutoff valve (ME791C, ME791CJ, ME792C or ME792CJ) should be used with the filler coupling.Warning: It is illegal to fill a 40 pound or less DOT propane cylinder that has a standard POL connection.Part No. Inlet Outlet Handle StyleBody/NippleMaterialME515 1/4” MNPT 1-5/16” Female Acme Knurled Brass/Brass 7”ME516 1/4” MNPT 1-5/16” Female Acme Heavy Duty Forged Brass/Brass 6”ME516S 1/4” MNPT 1-5/16” Female Acme Heavy Duty Forged Brass/Stainless Steel 6”OALME516SME515The Type I (QCC) thread replaces the POL connection on 40 pound or less DOT propane cylinders. Marshall Excelsior hasdeveloped numerous adapters to allow quick conversion from Type I (QCC) to different fill applications for retailers who fill both40 pound or less and larger propane cylinders through the same line. Simply hand tighten the adapter to the Type I (QCC) fillercoupling (ME515 or ME516 Series).ME393ME393HDME394Part No. Inlet Outlet Handle StyleConverts Type 1 (QCC)Filler Coupling toME393 1-5/16” Male Acme/Female POL Male Soft Nose POL Knurled POL Filler CouplingME393HD 1-5/16” Male Acme/Female POL Male Soft Nose POL Heavy Duty Forged POL Filler CouplingME394 1-5/16” Male Acme/Female POL 1-1/4” Female Acme Knurled Motor Fuel Filler CouplingME569ME569 1-5/16” Male Acme/Female POL 1-3/4” Female Acme Knurled Tank Filler Coupling- 94 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Type I (QCC) / OPD Valve CapDesigned to protect the 1-5/16” male Acme threads on Type I (QCC) or OPD typecylinder valves. Using a cap will reduce the likelihood of inadvertent damage tothe valve’s threads, shutoff mechanisms and sealing surfaces during storage orrefurbishment.ME392P installedon 20 LB cylinderPart No.FitsBrass Black VinylME392P B88C 1-5/16” Female AcmeB88CME392PType I (QCC) ConnectorThe Type I (QCC) connectors (ME517, ME518 and ME519 Series) are designed with a built-in excess flow feature and apositive shutoff that will not allow gas to flow until the connector is fully engaged. In case of a fire the built-in thermal protectionon the QCC connector melts allowing the nipple to disengage from the tank connection and stop the flow of propane. These QCCconnectors also provide a positive back check seal at disconnect to eliminate the propane in the hose from being released into theatmosphere.To connect a Type I (QCC) connector to a cylinder, close the cylinder valve and the control valves to all connected appliances.Hand tighten the QCC onto the cylinder and slowly open the cylinder valve. If the valve is opened too quickly, the excess flowdevice will be activated closing the flow of propane to the appliance. If the excess flow device is activated, close appliance controlvalves and wait 60 seconds to allow pressure in the line to equalize. Additional equalization time may be needed depending on thelength of the hose. Turn on appliances by following the manufacturer’s suggested lighting procedures.Note: The Type I (QCC) thread replaces the POL connection on 40 pound or less DOT propane cylinders.ME517ME518-25HME519ME517EVPart No.OutletHandwheel ThermalInletFlow CapacityColor Protection1/4” 1/4” Hose 3/8” HoseMNPT Barb BarbME517 ME517-25H ME517-38H 1-5/16” Female Acme 50 SCFH Air/100,000 BTUH Black YesME518 ME518-25H ME518-38H 1-5/16” Female Acme 100 SCFH Air/200,000 BTUH Green YesME519 ME519-25H ME519-38H 1-5/16” Female Acme 200 SCFH Air/400,000 BTUH Red YesPart No. Inlet Flow CapacityHandwheelColorThermalProtectionDescriptionME517EV 1-5/16” Female Acme Full Flow Black Yes Evacuation CouplingWarning: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceedthe closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. See the Excess FlowWarning page for more information regarding the use of excess flow devices.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 95 -

Gas BoxDesigned to eliminate the need for a 20 LB cylinder or modifications generally needed to plumb an outdoor appliance to a DOT orASME stationary tank. The Gas Box utilizes the standard LP-Gas outdoor appliance regulator and connector. Simply hard plumba gas line from the first stage regulator into the Gas Box. Then thread the standard Type I (QCC) or POL connector onto the GasBox, turn on the shutoff valve and enjoy continuous LP-Gas flow. Both models provide full capacity operation at 10 psig or higherinlet pressures for all outdoor appliances without modifications.The Gas Box is an easy way to guarantee increased propane sales. It eliminates the need for 20 pound cylinders, allowing thecustomer to purchase any appliance without modifications.Gas Box Features• Universal Type I (QCC)/female POL outlet connection• Primary shutoff valve for each outlet connection• Secondary safety shutoff poppet at each outlet for zerodischarge at disconnect• For use with 10-250 psig inlet pressure• Universal mounting hardware• Hinged cover with latching mechanism• Weather resistant high density polyethylene casePart No.ColorBlack Gray IvoryInletOutletNo. ofOutletsAccessoriesME951BLK ME951GRY ME951IVY 1/2” FNPT 1-5/16” Male Acme/Female POL Single MER428-60 = 60” Extension HoseMER428-120 = 120” Extension HoseME952BLK ME952GRY ME952IVY 1/2” FNPT 1-5/16” Male Acme/Female POL Dual (Male QCC/Female POL x Female QCC)Flow rate / Capacity specificationsModel ME951 – Single outlet *• 750,000 BTU/HR – 100 psig inlet pressure / Outlet regulated@ 9.5 – 13 in. W.C. (11” nom.)• 450,000 BTU/HR – 10 psig inlet pressure / Outlet regulated@ 9.5 – 13 in. W.C. (11” nom.)Model ME952 – Dual outlet *One outlet closed• 750,000 BTU/HR – 100 psig inlet pressure / Outlet regulated@ 9.5 – 13 in. W.C. (11” nom.)• 450,000 BTU/HR – 10 psig inlet pressure / Outlet regulated@ 9.5 – 13 in. W.C. (11” nom.)Both outlets open (at each outlet)• 750,000 BTU/HR – 100 psig inlet pressure / Outlet regulated@ 9.5 – 13 in. W.C. (11” nom.)• 325,000 BTU/HR – 10 psig inlet pressure / Outlet regulated@ 9.5 – 13 in. W.C. (11” nom.)*These are average capacities and may change slightly due to pressure drop dependingon individual installation conditions and length of gas supply runs for the service line.The BTU capacities shown will be further reduced by the flow limiting device in thefemale type I connection provided with the appliance being attached to the gas box.ME951BLKME952IVYME952GRYMER428- 96 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Type I (QCC) Installation AdaptersDesigned to provide a safe permanent outlet when installed into the household LP-Gas system. This permanent outlet eliminatesthe need for smaller containers when operating outdoor LP-Gas equipment. It is recommended that a shutoff valve be installedupstream from the adapter inlet to facilitate future servicing.Note: To use the female POL on the ME393 series, simply remove the internal gasket. The gasket must be in place to use theType I (QCC) connection.Type I (QCC) Installation Adapter Features• Can be used with both Type I (QCC) and male POL connections• ME398 and ME399 include an internal shutoff valve which provides a leak freemeans for outdoor equipment to be safely connected and disconnected withoutshutting down the entire systemME399Part No.PackagedPart No.ME393-1 — 1/4” FNPTME393EX — 1/4” FNPTME393EX1.8 — 1/4” FNPTME398 ME398P** Male Soft Nose POLME399 — 1/4” MNPTInlet Outlet Shutoff Device1-5/16” Male Acme/FemalePOL1-5/16” Male Acme/FemalePOL1-5/16” Male Acme/FemalePOL1-5/16” Male Acme/FemalePOL1-5/16” Male Acme/FemalePOL—.9 GPM Excess Flow*1.8 GPM Excess Flow*Quick ClosingQuick Closing* An excess flow device does not provide a 100% shutoff, a small amount of propane may leak if disconnected** Packaged option consists of a plastic clamshellME398PWarning: An excess flow valve will not activate if there is a break or leak downstream ofthe valve that does not equal or exceed the closing flow of the valve or if the excess flowvalve installed exceeds the flow capacity of the system. See the Excess Flow Warning pagefor more information regarding the use of excess flow devices.ME393-1Cylinder CollarsThese steel propane cylinder collars are designed to protect the valve installed on a cylinder. An automotive grade powder coatfinish provides maximum corrosion resistance.Warning: It is illegal to fill a tankwithout a protective collar. Without aprotective collar serious damage canoccur to the cylinder valve which canlead to catastrophic events such as thetank becoming a dangerous projectile,an explosion and/or fire causing propertydamage, or personal injury or death.Part No. Size *Multi-ValveME312-5MV 3-1/8” YesME350 3-1/2” NoME350MV 3-1/2” Yes* Multi-Valve style features cut-out in thread toprovide clearence for assembly over container valveME350ME350MVCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 97 -

Quick Acting Toggle ValvesDesigned for use primarily on cylinder filling operations and industrial applications where quick and precise on/off operation isnecessary. Note: This valve flows in one direction. Installing the valve in the opposite direction of the arrow may cause the valveto not close properly and/or pump pressure may open the valve.Quick Acting Toggle Valve Features• Positive shutoff• Corrosion resistant brass construction• One hand operation• Optional factory installed vent valve for saferelease of captured productME791CME792CNon-LockingPart No.LockingInletOutletFactoryInstalledVent ValveME791C ME792C 1/2” FNPT 1/4” FNPT NoME791CJME791CJ ME792CJ 1/2” FNPT 1/4” FNPT YesME791D ME792D 1/2” FNPT 1/2” FNPT NoMD791DJ ME792DJ 1/2” FNPT 1/2” FNPT YesMethanol InjectorThis gravity fed methanol injector provides a fast and efficient method to inject methanol into stationary ASME containers to helpprevent condensation from freezing in the propane system.Warning: Never attempt to refill injector with methanol while connected to a propane container. In order for the tank andmethanol injector vapor equalization to occur, no more than 42 ounces of methanol can be contained within the methanol injector.Methanol Injector Features• Spark resistant brass connectors and valve• Durable steel construction body• Automotive grade powder coat finish for maximumcorrosion resistance• For use with all multi-valve applications or wherevapor recovery systems are in placeMaximum Capacity = 42 OuncesMaximum Pressure = 250 PSIGMEP700Part No. Vapor Connection DescriptionMEP700 1-1/4” Female Acme AssemblyMEP700-01 —— Body Only- 98 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

POL Filler Couplings & AdaptersThese POL filler couplings make filling DOT propane cylinders with a POL connection quick and easy. A few turns allow the softnose POL to seal and unseal from the mating POL connection with minimal effort and loss of product. The long body models allowthe filler coupling handle to remain outside the fixed collar of the cylinder. Can be used on manual, electric or hydraulic system. Ina manual system a shutoff valve (ME791C, ME791CJ, ME792C or ME792CJ) should be used with the filler coupling.ME390ME388Part No. Inlet Outlet Handle StyleBody/NippleMaterialOALME388 1/4” MNPT Male Soft Nose POL Knurled - 2” Dia. Bass/Brass 2-11/16”ME390 1/4”MNPT Male Soft Nose POL Heavy Duty Forged Brass/Brass 6”ME390SME390S 1/4” MNPT Male Soft Nose POL Heavy Duty Forged Brass/Stainless Steel 6”These adapters allow for quick conversion from a POL connection to various filling applications for retailers who fill multiplecylinder types through the same Type I (QCC) connection. Simply hand tighten the adapter to the POL filler connection (ME388or ME390 Series).ME392ME394ME568Part No. Inlet OutletHandleStyleConverts POL FillerCoupling toME392 Female POL 1-5/16” Female Acme Knurled Type I (QCC) Filler CouplingME394 1-5/16” Male Acme/Female POL 1-1/4” Female Acme Knurled Motor Fuel Filler CouplingME568 Female POL 1-3/4” Female Acme Knurled Tank Filler CouplingCylinder Valve WrenchesDesigned to remove or install Type I (QCC)/OPD cylinder valves or POL service valves without damage to the valve base.Part No. Thread StyleMEP121 Male POL POLMEP121MEP122 1-5/16” Female Acme Type I (QCC)/ OPDMEP122CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 99 -

Male POL x 1/4” MNPTMale HardNose POLME318ME318P*Part No.Male HardNose POL90° AngleMale SoftNose POLConnectionMale POL DescriptionME345 ME1629 1/4” MNPT 7/8” NutME322 — — 1/4” MNPT 7/8” Nut, 3-1/2” OAL— — ME1654 1/4” MNPT Plastic Handwheel— — ME1654AH 1/4” MNPT Hex Handwheel— — ME1654AR 1/4” MNPT Round HandwheelME319 ME348 — 1/4” MNPT 1-1/8” NutME1690ME1690P*— ME1641 1/4” MNPT .9 GPM Excess Flow, 7/8” Nut— — ME1653 1/4” MNPT .9 GPM Excess Flow, Plastic Handwheel— — ME1653AH 1/4” MNPT .9 GPM Excess Flow, Hex Handwheel— — ME1653AR 1/4” MNPT .9 GPM Excess Flow, Round HandwheelME1692 — — 1/4” MNPT .9 GPM Excess Flow, 1-1/8” NutME1690-EX18 — ME1641EX18 1/4” MNPT 1.8 GPM Excess Flow, 7/8” Nut— — ME1638 1/4” MNPT #60 Orifice Hole, 7/8” NutMale HardNose POLMale SoftNose POLPlasticHandwheelME345* Packaged option consists of a plastic clamshellMale POL x Hose BarbsMale HardNose POLPart No.Male SoftNose POLHoseI.D.Male POL DescriptionHexHandwheelME5930 ME1656-78N 1/4” 7/8” NutME5931-78N ME5931-78SN 3/8” 7/8” NutME5930-118N ME1656-118N 1/4” 1-1/8” NutRoundHandwheelME5931 ME5931-SN 3/8” 1-1/8” Nut— ME1656 1/4” Plastic Handwheel— ME1656AH 1/4” Hex Handwheel— ME1656AR 1/4” Round HandwheelME1683 ME1655-78N 1/4” .9 GPM Excess Flow, 7/8” NutME5931EX-78N ME5931SNEX78N 3/8” .9 GPM Excess Flow, 7/8” NutME1684 — 1/4” .9 GPM Excess Flow, 1-1/8” Nut— ME1655 1/4” .9 GPM Excess Flow, Plastic Handwheel— ME1655AH 1/4” .9 GPM Excess Flow, Hex Handwheel— ME1655AR 1/4” .9 GPM Excess Flow, Round Handwheel— ME1655EX1878N 1/4” 1.8 GPM Excess Flow, 7/8” NutWarning: An excess flow valve willnot activate if there is a break or leakdownstream of the valve that does notequal or exceed the closing flow of thevalve or if the excess flow valve installedexceeds the flow capacity of the system.See the Excess Flow Warning page formore information regarding the use ofexcess flow devices.— ME1657 1/4” #60 Orifice Hole, 7/8” Nut- 100 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Single Piece POL AdaptersPOL x MNPTPOL x Male FlarePart No.POLConnectionExcessFlowMNPTPart No.POLConnectionExcessFlowMaleFlareME284 Female — 1/4”ME285 Female — 3/8”ME286 Female — 1/2”ME287 Female — 3/4”ME352 Male Hard Nose — 3/8”ME354 Male Hard Nose — 1/2”ME354EX9 Male Hard Nose .9 GPM 1/2”ME354EX18 Male Hard Nose 1.8 GPM 1/2”PartNo.POL x FNPTPOLConnectionFNPTME300 Female 1/8”ME301 Female 1/4”ME302 Female 3/8”ME303 Female 1/2”ME304 Female 3/4”ME351 Male Hard Nose 1/4”ME357 Male Hard Nose 1/2”ME285ME353EX18ME353ME303ME353 Male Hard Nose — 3/8”ME353-SN Male Soft Nose — 3/8”ME353EX9 Male Hard Nose .9 GPM 3/8”ME353EX18 Male Hard Nose 1.8 GPM 3/8”ME355 Male Hard Nose — 1/2”ME355-SN Male Soft Nose — 1/2”ME355EX9 Male Hard Nose .9 GPM 1/2”ME355EX18 Male Hard Nose 1.8 GPM 1/2”ME356 Male Hard Nose — 5/8”ME356-SN Male Soft Nose — 5/8”ME356EX9 Male Hard Nose .9 GPM 5/8”ME356EX18 Male Hard Nose 1.8 GPM 5/8”PartNo.POL x POLPOLConnectionPOLConnectionME305 Female FemaleWarning: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceedthe closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. See the Excess FlowWarning page for more information regarding the use of excess flow devices.POL Cap & PlugsPart No.BodyOnlyBrassBody WithChainPlasticBodyOnlyStyleME1691 ME1691-1 ME970PMale Hard NosePOL PlugME1699 — — Female POL CapME970PME1699ME1691CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 101 -

Safe-T-LocksDesigned to prevent tampering, product theft and/or accidental discharge of product. This product is perfect for any size tank valvewith a POL connection or 1-3/4” Acme connection or gas plumbing, such as a riser.To install, securely screw the plug or cap to the valving or plumbing using the appropriate wrench. Snap locking mechanism intoplace over plug or cap. Locking mechanism will cover the installation hex or knurl and swivel freely until key is inserted and thelock is removed.Safe-T-Lock Features• All brass body construction for maximum durability• Locking mechanism and key features durable chrome plating• Locking mechanism swivels 360° when installed to preventtampering or removal• Locking mechanism cannot be removed without key• Universal key for all sizes and stylesPart No. Thread PackagingAdditionalKeysME530 Male Soft Nose POL 12 Plugs & Locks, 1 Key ME530-03ME531-50 1/2” FNPT 6 Caps & Locks, 1 Key ME530-03ME531-75 3/4” FNPT 6 Caps & Locks, 1 Key ME530-03ME532-38 3/8” Male Flare 12 Plugs & Locks, 1 Key ME530-03ME532-50 1/2” Male Flare 12 Plugs & Locks, 1 Key ME530-03ME533 1-3/4” Female Acme 2 Caps & Locks, 1 Key ME530-03ME530PL Male Soft Nose POL 12 Caps & Locks, 1 Key ME530-03ME531SeriesME532SeriesME533ME530PLSeriesME530POL Thread Clean Out ToolDesigned for use with any female POL thread or valve inlet opening. Allows operator to safely remove debris and other foreignmaterial from female .880-14 NGO left hand threads (female POL) without damaging threads. Simply thread clean out tool intofemale POL threads using handwheel until the tool reaches the final thread. Reverse and remove tool carefully. Reverse tool anduse attached 7/8” diameter bottle brush to perform final clean out operation. Blow out any remaining debris by using a compressedair line.POL Thread Clean Out Tool• Constructed from hardened tool steel and plated for maximum product life• Four clearance flutes to allow debris to be channeled away from threads• Convenient 7/8” diameter wire brush for final clean outMEP100Warning: The POL thread clean out tool is strictly intended for use as a cleaning device and in no way should be used as a gauge todetermine the usability of the thread. (Always refer to NFPA 58 and follow the appropriate guidelines prior to installing LP-Gas lines)- 102 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Tee Check ManifoldsThese manifolds are designed to connect two cylinders. The check keeps the two tanks equalized and allows each tank to bechanged without disrupting the flow of propane to appliances or dispensing large amounts of LP-Gas into the atmosphere fromthe other tank. When changing out a tank, simply close the tank valve and disconnect. The check will automatically move to theclosed tank valve side to seal off the inlet of that tank allowing minimal LP-Gas discharge into the atmosphere. Primary uses arefor mobile homes, single appliances, recreational vehicles or summer cottages.The manual changeover works the same as the check except it requires the consumer to manually close the manifold valve on theside of the tank being changed over.Part No.Packaged PartNo.Inlet Inlet Outlet Nut SizeME1701A — Female POL Female POLMale HardNose POL7/8”ME1702A — Female POL Female POLMale HardNose POL1-1/8”ME1705A — Female POL Female POL 1/4” MNPT —ME1701AME1705AME1700AME1700A-P**1/4” FemaleInverted Flare1/4” FemaleInverted Flare1/4” MNPT —MEP456A* —1/4” FemaleInverted Flare1/4” FemaleInverted Flare1/4” MNPT —* Manual Change Over ** Packaged option consists of a plastic clam shellMEP456AME1700AMultiple Cylinder Tee Block ManifoldsThese manifolds are designed to connect multiple cylinders to automatic changeover regulators. These manifolds have no checkand are primarily for systems requiring more than one cylinder to be in operation at a time. The appropriate pigtail must be usedto connect the manifold inlet to the service cylinder valve.Part No. Inlet Inlet Outlet Nut SizeME1701 Female POL Female POL 1/4” FNPT —ME1701B Female POL Female POL Male Hard Nose POL 7/8”ME1702B Female POL Female POL Male Hard Nose POL 1-1/8”ME1701B-SN Female POL Female POL Male Soft Nose POL 7/8”ME1701X Female POL Female POLMale .9 GPM ExcessFlow Hard Nose POL7/8”ME1701BME1704BME1701BXSN Female POL Female POLMale .9 GPM ExcessFlow Soft Nose POL7/8”ME1704B Female POL Female POL Female POL 1-1/8”ME1700B1/4” FemaleInverted Flare1/4” FemaleInverted Flare1/4” MNPT —ME-T9-444 1/4” FNPT 1/4” FNPT 1/4” MNPT —ME-T9-444Warning: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceedthe closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. See the Excess FlowWarning page for more information regarding the use of excess flow devices.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 103 -

Camping TeesME412ME413ME414ME415ME416ME418ME424ME421ME422ME420PME425Part No.PackagedPart No.Inlet Auxiliary Inlet Outlet OutletME412 — 1-5/16” Female Acme — 1”-20 Male 1”-20 MaleME413ME413P*#60 Male Soft Nose POL with Round BrassHandwheel— 1”-20 Male 1”-20 MaleME414 ME414P* 1”-20 Female — 1”-20 Male 1”-20 MaleME415 ME415P* .9 GPM Excess Flow Male Hard Nose POL — Female POL 1”-20 MaleME416 —.9 GPM Excess Flow Male Hard Nose POLwith Plastic HandwheelME418 — 1-5/16” Female Acme —ME420 ME420P* .9 GPM Excess Flow Male Hard Nose POL— Female POL Female POL1/4” Female Inverted Flarewith CheckME421 — .9 GPM Excess Flow Male Hard Nose POL —ME422 — 1-5/16” Female Acme 1/4” Female Inverted FlareME424 — .9 GPM Excess Flow Male Hard Nose POLME425 — .9 GPM Excess Flow Male Soft Nose POL* Packaged option consists of a plastic clamshell1/4” Female Inverted Flarewith Check1/4” Female Inverted Flarewith Check1-5/16” Male Acme/Female POLwith Quick Closing PoppetFemale POL1-5/16” Male Acme/Female POLwith Quick Closing Poppet1-5/16” Male Acme/Female POLwith Quick Closing Poppet1-5/16” Male Acme/Female POLwith Quick Closing Poppet1-5/16” Male Acme/Female POLwith Quick Closing Poppet1”-20 Male1”-20 Male1”-20 Male1”-20 Male1”-20 Male1”-20 MaleWarning: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceedthe closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. See the Excess FlowWarning page for more information regarding the use of excess flow devices.- 104 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Camping Elbows & AssembliesME423ME474ME477ME481PME476Part No.ME423PackagedPart No.ME423P*Inlet Outlet Outlet.9 GPM Excess Flow Male HardNose POL1-5/16” Male Acme/Female POLwith Quick Closing Poppet1”-20 MaleME474 — 1-5/6” Female Acme 1”-20 Male —ME475ME475P*ME475AR —#60 Male Soft Nose POL withPlastic Handwheel#60 Male Soft Nose POL withRound Brass Handwheel1”-20 Male —1”-20 Male —ME475B — #60 Male Soft Nose POL 1”-20 Male —ME476 —ME477 —.9 GPM Excess Flow Male HardNose POL.9 GPM Excess Flow Male HardNose POL with Plastic HandwheelME481 ME481P* 1”-20 FemaleME497 —ME497AR —Male Soft Nose POL withPlastic HandwheelMale Soft Nose POL with RoundBrass HandwheelME4751”-20 Male —1”-20 Male —1-5/16” Male Acme/Female POLwith Quick Closing Poppet—1”-20 Male —1”-20 Male —ME497ME497AR* Packaged option consists of a plastic clamshellWarning: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceedthe closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. See the Excess FlowWarning page for more information regarding the use of excess flow devices.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 105 -

Camping FittingsME417ME483ME484ME485 ME487 ME488 ME491ME492 ME493ME494 ME496Part No.PackagedPart No.InletOutletME417 — 1/4” MNPT 1”-20 Male with O-ringME483 —1”-20 FemaleCap with Strap—ME484 — 1”-20 Female 1/4” Hose BarbME485 — 1”-20 Female 1/4” FNPTME487 ME487P* 1”-20 Female Female POLME488 ME488P* 1”-20 Female 1/4” MNPTME491 — 3/8” Male Flare 1”-20 MaleME492 ME492P* 1/4” FNPT 1”-20 MaleME493 —ME494 —9/16”-18 MaleLeft Hand9/16”-18 MaleLeft HandME496 — 1/4” Hose Barb1”-20 Male with Check& O-ring1”-20 Male1”-20 Male Swivel withValve Stem & O-ringME487P* Packaged option consists of a plastic clamshell- 106 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Flow-Longer & Stay-Longer KitsThe Flow-Longer Propane Kits are designed to connect small,portable appliances, normally fueled by disposable LP-Gas cylinders,to the existing LP-Gas fuel supply of a recreational vehicle, cottage,backyard patio, etc. without interrupting the supply of regulated fuelto the system. Flow-Longer eliminates the need to purchase an extraLP-Gas cylinder or several small, disposable type cylinders.MER470 Flow-Longer Propane Kit Includes• Brass tee connection (ME415) .9 GPM excess flowmale hard nose POL x female POL x 1”-20 male• 12 foot hose (MER421-144) 1”-20 male x 1”-20 femaleMER471 Flow-Longer Plus Propane Kit Includes• Brass elbow connection (ME423) .9 GPM excess flowmale hard nose POL x 1-5/16” male Acme/female POLwith quick closing poppet x 1”-20 female• 12 foot hose (MER421-144) 1”-20 male x 1”-20 femaleMER470MER471The Stay-Longer Propane Kits are designed to give you new flexibility on how you use your LP-Gas. You can stay longer byhooking up auxiliary LP-Gas cylinders, or you can tap into the RV’s LP-Gas system to fuel portable high-pressure appliances.MER472 Stay-Longer Propane Kit Includes• Brass tee connection (ME420) .9 GPM excess flowmale hard nose POL x female POL x 1”-20 male x 1/4”female inverted flare• 5 foot hose (MER401-60) .9 GPM excess flow malePOL x 1/4” male inverted flareMER473 Stay-Longer Plus Propane Kit Includes• Brass tee connection (ME420) .9 GPM excess flowmale hard nose POL x female POL x 1”-20 male x 1/4”female inverted flare• 5 foot hose (MER401-60) .9 GPM excess flow malehard nose POL x 1/4” male inverted flare• 12 foot hose (MER421-144) 1”-20 male x 1”-20 femaleMER472MER473All kits include installation instructions and a convenient reusable box for storage.Note: The tee fitting must be installed between the vapor withdrawal valve on your LP-Gas container and the pressure regulator.This properly places the tee fitting in the high pressure portion of the LP-Gas system. Gas connections to the tee fitting are notdesigned for movement or rotation after installation. Flexing, twisting, or vibration should be avoided.Warning: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceedthe closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. See the Excess FlowWarning page for more information regarding the use of excess flow devices.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 107 -

Last Chance AdaptersDesigned to provide a quick way to change from a 20 pound cylinder to a 1 pound disposable cylinder. Can be used to connect asmall 1 pound disposable cylinder to a gas grill or other appliance.Note: To use the male POL on the ME393 series, simply remove the internal gasket. The gasket must be in place to use the TypeI (QCC) connection.ME480EXME480Part No.PackagedPart No.Inlet Outlet DescriptionME480 — 1”-20 Female 1-5/16” Male Acme/Female POL Full FlowME480EX — 1”-20 Female 1-5/16” Male Acme/Female POL .9 GPM Excess FlowME480EX1.8 — 1”-20 Female 1-5/16” Male Acme/Female POL 1.8 GPM Excess FlowME481 ME481P** 1”-20 Female 1-5/16” Male Acme/Female POL Shutoff Poppet* An excess flow device does not provide a 100% shutoff, a small amount of propane mayleak if disconnected** Packaged option consists of a plastic clamshellME481PWarning: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceedthe closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. See the Excess FlowWarning page for more information regarding the use of excess flow devices.MEC Space Saver Dielectric UnionsThe ME690 series dielectric unions are intended to isolate metallic piping from sources of electrical current and to help preventgalvanic corrosion. The ME690 dielectric union would typically be installed at the ASME tank directly downstream of the firststage regulator but prior to underground piping and/or at the inlet of the second stage regulator above ground at the dwelling thereby protecting the underground metallic piping from corrosion and electrical current.Dielectric Union Features• Heavy duty brass construction• Convenient male NPT x male SAE flare connection to minimizepotential piping leak points and extra fittings• Compact size for tight spaces• Wide wrench flats for easy installation• Will not conduct an electrical charge from one side of the unionto the otherPart No. Description OALME690-4-6 Dielectric Union 1/2” MNPT x 3/8” Male Flare 3-3/8”ME690-6-6 Dielectric Union 3/4” MNPT x 3/8” Male Flare 3-1/2”ME690-4-8 Dielectric Union 1/2” MNPT x 1/2” Male Flare 3-1/2”ME690-6-8 Dielectric Union 3/4” MNPT x 1/2” Male Flare 3-5/8”ME690-4-10 Dielectric Union 1/2” MNPT x 5/8” Male Flare 3-5/8”ME690-6-10 Dielectric Union 3/4” MNPT x 5/8” Male Flare 3-3/4”ME690-4-8- 108 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

CGA 555 FittingsCGA 555 adapters are standard cylinder valve outlet connections for liquid butane or propane withdrawal. They are designed towithstand pressures up to 3,000 psig.Part No. Inlet OutletME306 Female CGA 555 1/4” MNPTME307 Female CGA 555 9/16”-18 Male Left HandME308 Female CGA 555 Female POLME306ME308Part No.Cap with ChainME309-1 CGA 555ME309-1High Pressure Gas ConnectionsPart No.HoseHose Barb Hose BarbThreadsNut OnlyI.D.Assembly OnlyME23C ME23C-1 ME23C-2 1/4” 9/16”-18 Female Left HandME23E ME23E-1 ME23C-2 3/8” 9/16”-18 Female Left HandMale HardNose POLPart No.Male SoftNose POLConnectionPOL DescriptionME1650 ME1650SN 9/16”-18 Male Left Hand 7/8” NutME1651 — 9/16”-18 Male Left Hand 1-1/8” NutME1689 ME1645-78N 9/16”-18 Male Left Hand .9 GPM Excess Flow, 7/8” Nut— ME1645 9/16”-18 Male Left Hand .9 GPM Excess Flow, Plastic HandwheelME1687 — 9/16”-18 Male Left Hand .9 GPM Excess Flow, 1-1/8” NutME23CSoft NosePOLHard NosePOLME1689-EX18 — 9/16”-18 Male Left Hand 1.8 GPM Excess Flow, 7/8” NutOutlet BushingsMalePartLeft Hand ThreadNo.ThreadME24C 9/16”-18 1/4” MNPTME24E 9/16”-18 3/8” MNPTME24F 9/16”-18 1/2” MNPTME26C 9/16”-18 9/16”-18 Male Left HandME24CWarning: An excess flow valve will not activateif there is a break or leak downstream of the valvethat does not equal or exceed the closing flowof the valve or if the excess flow valve installedexceeds the flow capacity of the system. See theExcess Flow Warning page for more informationregarding the use of excess flow devices.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 109 -

Copper Pigtails and HogtailsThese pigtail and hogtail assemblies come with two brass connectors brazed onto a heavy wall annealed copper tube with a 250psig pressure rating. The 1/4” and 3/8” tube have a pull test rating of 500 and 750 pounds respectively. LISTED and testedin accordance with UL 569.Different applications require specific pigtail and hogtail assemblies. Special attention is required when ordering to ensure theproper assembly is purchased for the intended application. Marshall Excelsior recommends every new installation or replacementregulator have a new pigtail installed.DescriptionMale Hard Nose POL xMale Hard Nose POL,7/8” NutMale Hard Nose POL xMale Hard Nose POL,1-1/8” Nut1/4” Male Inverted Flare x MaleHard Nose POL,7/8” Nut1/4” Male Inverted Flare x MaleHard Nose POL,1-1/8” Nut1/4” MNPT xMale Hard Nose POL,7/8” Nut1/4” MNPT xMale Hard Nose POL,1-1/8” Nut1/2” MNPT xMale Hard Nose POL,7/8” NutApprox.LengthPart No.1/4” Tube OD 3/8” Tube ODLong Nipple Short Nipple Long Nipple Short Nipple6 — ME1664-06 ME1680L-06 ME1680-0612 ME1662-12 ME1664-12 ME1680L-12 ME1680-1220 ME1662-20 ME1664-20 ME1680L-20 ME1680-2030 ME1662-30 ME1664-30 ME1680L-30 ME1680-3036 ME1662-36 ME1664-36 ME1680L-36 ME1680-3648 ME1662-48 ME1664-48 ME1680L-48 ME1680-4820 ME1660-20 — — ME1680HD-2030 ME1660-30 — — —36 ME1660-36 — — —48 ME1660-48 — — —15 — ME1665-15 — —20 ME1663-20 ME1665-20 — —30 ME1663-30 ME1665-30 — —36 ME1663-36 ME1665-36 — —48 ME1663-48 ME1665-48 — —20 ME1661-20 — — —30 ME1661-30 — — —36 ME1661-36 — — —40 ME1661-40 — — —6 ME1679-06 ME1669-06 — ME1689-0612 ME1679-12 ME1669-12 ME1689L-12 ME1689-1218 ME1679-18 ME1669-18 — —20 ME1679-20 ME1669-20 ME1689L-20 ME1689-2030 ME1679-30 ME1669-30 ME1689L-30 ME1689-3036 ME1679-36 ME1669-36 — ME1689-3648 ME1679-48 ME1669-48 ME1689L-48 ME1689-4820 ME1679HD-20 — — —48 ME1679HD-48 — — —12 — — ME1684L-12 ME1684-1220 — — ME1684L-20 ME1684-20Long NippleShort Nipple1/4” Inverted Flare1/4” MNPTMale Hard Nose POL,7/8” Nut- 110 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Dielectric Pigtails and HogtailsMEC Dielectric Pigtails & HogtailsME1680LD-12ME1600D SeriesME1679D-12Application:The ME1600D series dielectric pigtails/ hogtails are intended to isolate metallic piping from sources of electricalcurrent and to help prevent galvanic corrosion when used on underground containers. The ME1600D dielectric pigtail/hogtail would typically be installed at the ASME tank directly upstream of the first stage regulator prior to undergroundpiping there by isolating the underground metallic piping from electrical current.Features:• Heavy duty brass construction• Available in 1/4” & 3/8” copper tubing sizes in 12” or 20” length configurations• Will not conduct an electrical charge from one side of the pigtail/ hogtail to the otherPart No.DescriptionNippleLengthTubingSizeLengthME1662D-12 Dielectric Pigtail POL x POL LONG 1/4” 12”ME1662D-20 Dielectric Pigtail POL x POL LONG 1/4” 20”ME1664D-12 Dielectric Pigtail POL x POL SHORT 1/4” 12”ME1664D-20 Dielectric Pigtail POL x POL SHORT 1/4” 20”ME1669D-12 Dielectric Pigtail POL x 1/4” MNPT SHORT 1/4” 12”ME1669D-20 Dielectric Pigtail POL x 1/4” MNPT SHORT 1/4” 20”ME1679D-12 Dielectric Pigtail POL x 1/4” MNPT LONG 1/4” 12”ME1679D-12 Dielectric Pigtail POL x 1/4” MNPT LONG 1/4” 20”ME1680D-12 Dielectric Hogtail POL x POL SHORT 3/8” 12”ME1680D-20 Dielectric Hogtail POL x POL SHORT 3/8” 20”ME1680LD-12 Dielectric Hogtail POL x POL LONG 3/8” 12”ME1680LD-20 Dielectric Hogtail POL x POL LONG 3/8” 20”CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 111 -

Bent Copper Pigtails and Hogtails90° Bend270° Bend Right HandPart No.Male Hard Nose POL xMale Hard Nose POL,7/8” Nut1/4” MNPT xMale Hard Nose POL,7/8” NutApproximateLength1/4” Tube ODShort Nipple3/8” Tube OD Short Nipple90° 90° 270° Right 360°12 — ME1680-12B90 ME1680-12B270R ME1680-12B3605 ME1669-5B90 ME1689-5B90 — —6 ME1669-6B90 ME1689-6B90 — —Thermoplastic HosesFlexible thermoplastic UL and CGA approved hose. These hoses are rated up to 350 psig working pressure with a 400 pound pulltest rating. Each hose comes with two ends and fully crimped brass ferrules.Warning: An excess flow valve will not activate if there is a break or leak downstream of the valve that does not equal or exceedthe closing flow of the valve or if the excess flow valve installed exceeds the flow capacity of the system. See the Excess FlowWarning page (PG. 18) for more information regarding the use of excess flow devices.MNPT3/8” Female SwivelPart No.3/8” Hose IDMER610-”X”ApproximateLengths“X”*24, 30, 36, 48,60, 120, 144, 240ConnectionConnection3/8” MNPT 3/8” Female Flare SwivelMER611-”X” 24, 30, 36, 40 1/2” Female Flare Swivel 3/8” MNPTMER613-”X”18, 24, 30, 36, 48, 60, 72,120, 144, 180, 240, 3003/8” Female Flare Swivel 3/8” Female Flare Swivel* Replace “X” with the desired hose length i.e. MER610-48- 112 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Thermoplastic HosesPart No.1/4” Hose IDApproximateLength“X”*ConnectionMER409-”X” 20, 24, 36, 60 Male Hard Nose POL, 7/8” NutMER428-”X” 60, 120MER412-”X” 20MER425-”X”MER403-”X”MER401-”X”12, 15, 18,20, 24, 30,36, 48, 6012, 15, 18, 20,24, 30, 36, 48,60, 72, 120, 24012, 15, 18,20, 24, 30,36, 48, 60MER423-”X” 15, 20, 24, 36MER404-”X” 15, 18, 20, 24MER404AR-”X” 18, 24, 36MER406AR-”X”MER405-”X”12, 24, 36,48, 6012, 15, 18,20, 24, 30,36, 48, 60Female QCC, Type I Connection withFemale POL.9 GPM Excess Flow Male Hard NosePOL, 7/8” NutFemale QCC, Type I ConnectionMale Hard Nose POL, 7/8” Nut.9 GPM Excess Flow Male POL, 7/8”Nut.9 GPM Excess Flow Male Soft NosePOL, Plastic Handwheel#60 Orifice Hole Male Soft Nose POL,Plastic Handwheel#60 Orifice Hole Male Soft Nose POL,Brass Round HandwheelMale Soft Nose POL, Brass RoundHandwheel.9 GPM Excess Flow Male POL, 7/8”NutConnectionMale Hard Nose POL,7/8” NutMale QCC, Type IConnection.9 GPM Excess FlowMale Hard Nose POL,7/8” Nut1/4” Male Inverted Flare1/4” Male Inverted Flare1/4” Male Inverted Flare1/4” Male Inverted Flare1/4” Male Inverted Flare1/4” Male Inverted Flare1/4” MNPT1/4” MNPTMER414-”X” 10, 14, 120 1/4” MNPT 1/4” MNPTMER422-”X” 6 1/4” Female Flare Swivel 1/4” MNPTMER434-”X” 50 3/8” Female Flare Swivel 1/4” MNPTMER429-”X” 72 9/16”-18 Female Left Hand Swivel 1/4” MNPTMale Soft NosePOL, PlasticHandwheelMale Hard NoseMale Type I(QCC)Female Type I(QCC), GreenHandle1/4” Inverted FlareFNPTMER426-”X” 15, 20, 60 Female QCC, Type I Connection 1/4” MNPTMER410-”X”MER413-”X”10, 20, 24, 30,36, 48, 60, 72,120, 144, 18024, 36, 48,60, 72, 96,120, 144, 1803/8” MNPT3/8” Female Flare Swivel3/8” Female FlareSwivel3/8” Female FlareSwivel9/16”-18 Female LHMER408-”X”MER407-”X”12, 36, 60,144, 28824, 36, 48, 60,72, 120, 1449/16”-18 Female Left Hand SwivelMale Soft Nose POL, PlasticHandwheel9/16”-18 Female LeftHand Swivel1”-20 Male Swivel1”-20 Male SwivelMER421-”X” 48, 60, 72, 144 1”-20 Female Swivel 1”-20 Male Swivel* Replace “X” with the desired hose length i.e. MER409-241”-20 Female SwivelCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 113 -

Hose BarbsPart No.Four BarbLowPressureBrass Steel 1Seven BarbHighPressureFourBarbFour Barbwith 3/64”Orifice HoleHoseI.D.ThreadsME4631 — — — 1/4” 1/8” FNPTME4632 ME5632 — — 1/4” 1/4” FNPTME4633 ME5633 — — 1/4” 3/8” FNPTME4652 — — — 3/8” 1/4” FNPTME4653 ME5653 — — 3/8” 3/8” FNPTME4654 — — — 3/8” 1/2” FNPTME4231 ME5231 — — 1/4” 1/8” MNPTME4232 ME5232 — — 1/4” 1/4” MNPTME4233 ME5233 — — 1/4” 3/8” MNPT— — A6132 A6133 3/8” 1/8” MNPTME4252 — A1132 A1133 3/8” 1/4” MNPTME4253 ME5253 — — 3/8” 3/8” MNPTME4254 — — — 3/8” 1/2” MNPT— — A6138 A6139 1/2” 1/8” MNPT— — A1138 A1139 1/2” 1/4” MNPTME4273 — — — 1/2” 3/8” MNPTME4274 ME5274 — — 1/2” 1/2” MNPTME4293 — — — 5/8” 3/8” MNPTME4835 ME5835 — — 1/4” 3/8” Male FlareME4855 — — — 3/8” 3/8” Male FlareME4857 — — — 3/8” 1/2” Male Flare— ME5133 — — 1/4” 1/4” Male Inverted FlareME4333 — — — 1/4” 1/4” Female Flare SwivelME5334ME4335 5, 62 ME5335— — 1/4” 3/8” Female Flare SwivelME5336ME4355 63 ME5355— — 3/8” 3/8” Female Flare SwivelME4357 ME5357 — — 3/8” 1/2” Female Flare SwivelME4377 4 ME5377 — — 1/2” 1/2” Female Flare Swivel1—Rated for LP-Gas & NH 34—ME4377-1 (barb only); ME4377-2 (nut only)2—ME4335-1 (barb only); ME4335-2 (nut only) 5—ME5334-1 (barb only)3—ME4355-1 (barb only); ME4335-2 (nut only) 6—Forged NutME4652ME5632ME5233ME4252A1132ME4835ME5133ME5335- 114 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Hose Ferrules & Hose MendersME7327ME27CPart No. I.D. OAL Part No. I.D. OALME27EME7323 .525” 1” ME7329 .687” 1”ME7324 .531” 1” ME7330 .718” 1”ME7325 .562” 1” ME7331 .750” 1”ME7326 .593” 1” ME7332 .781” 1”ME7327 .625” 1” ME7333 .812” 1”Part No. Hose I.D.ME27C 1/4” x 1/4”ME27E 3/8” x 3/8”High Pressure Test BlocksDesigned to test high pressure lines downstream of the container valvefor system leaks. The optional bleeder valve enables the line pressure tobe adjusted to the desired test pressure.Part No. Inlet Outlet PSIGFactoryInstalledVent ValveMEJ600 Male Hard Nose POL Female POL 0-300 NoMEJ601 Male Hard Nose POL Female POL 0-300 YesMEJ601-WOG* Male Hard Nose POL Female POL — YesMEJ600* Without gaugeMEJ601CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 115 -

Low Pressure Test Kits & AdaptersThese kits are designed to check for gas leaks by verifying the line pressure ofan appliance. Each kit includes a case, gauge, and rubber hose with a bell onthe end.Low Pressure Test Kit Features• Capacity 0 - 35” water column• Adjustable gauge models can be reset to zerowith provided screwdriver• Three foot rubber hose with bellME60P-2Part No.Kit withCaseGauge& HoseOnlyGauge &Hose BarbConnectionGauge &1/4” MNPTConnectionAdjustableGaugeManometerAdapterME60P-2 ME60P-5 — ME60-2 Yes ME1328 (3/8” OD)ME1331 (1/2” OD)ME50P-2 ME50P-5 ME50-2 ME50-2-01 No ME1332 (5/8” OD)ME50P-2The serviceman’s friend (METL051 & METL052) eliminates the hassle ofcarrying numerous bushing and fittings to each job site. It has three threadson one end with a hose barb and an 1/8” MNPT on the other end. A hose caneasily be attached to either end and can be connected to a manometer or otherflow meters to check line pressure on an appliance.METL051Part No. Connection ConnectionME50P-5ME50-2METL051 5/16”-32 Male / 1/8” MNPT / 1/2” MNPT Standard test hose fitting/1/8” MNPTMETL052 5/16”-32 Male / 1/8” MNPT / 1/4” MNPT Standard test hose fitting/1/8” MNPTME1332Low Pressure Test BlockDesigned to test low pressure lines for system leaks. The factory installed checkvalve allows the line to be pressurized and adjusted to the desired test pressure.Part No. Inlet PSIGMEJ610/15 3/4” FNPT 0-15MEJ610/30 3/4” FNPT 0-30MEJ610/60 3/4” FNPT 0-60MEJ610/100 3/4” FNPT 0-100MEJ610/30- 116 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Pressure Test AccessoriesThese accessories are easily adaptable to industry standard pressure test equipment andprovide a very reliable, inexpensive, permanent way to test both high and low pressurelines in domestic tank installations.WithPlugTest Gauge Features• Reliable method to test high and low pressure tap installations• Provides an effective method to bleed vapor for pressureequalization and more accurate gauge readings• Allows for an effective method to bleed vaporfrom the testing equipment prior to disconnect• High quality liquid filled pressure gaugeDesigned to provide an inexpensive way to permanentlyinstall a pressure tap upstream or downstream from the first stageregulator. The #54 orifice port provides controlled line pressure formore accurate readings and protects test equipment from pressurespikes while allowing easy installation of pressure test monitoringdevices.Part No.WithoutPlugConnectionConnectionPort Hole with#54 OrificeME295 ME295-1 Male Hard Nose POL Female POL 1/8” FNPTME295SN ME295SN-1 Male Soft Nose POL Female POL 1/8” FNPTME296 ME296-1 1/4” MNPT 1/4” FNPT 1/8” FNPTME297 ME297-1 3/8” MNPT 3/8” FNPT 1/8” FNPTME298 ME298-1 1/2” MNPT 1/2” FNPT 1/8” FNPT— MEJ595 1/2” MNPT 1/2” FNPT1/4” FNPT withno OrificeME299 ME299-1 3/4” MNPT 3/4” FNPT 1/8” FNPTPart No. Connection Connection DescriptionMEJ604 1/4” FNPT 1/8” MNPT ExtensionThese accessories are intended for first stage regulatorswith pressure taps in either the upstream or downstreampositions.MER432 SeriesMEJ608B-02Part No. Outlet Inlet PSIGME295-1MEJ595#54 OrificeFactory InstalledVent ValveMEJ602* 1/4” FNPT 1/4” MNPT — YesMEJ603LP 1/4” FNPT 1/4” MNPT 0-15 YesMEJ603HP 1/4” FNPT 1/4” MNPT 0-300 Yes* Without gaugeMEJ603HPMEJ604ME296-1This check valve allows the line to be pressurized andadjusted to the desired pressure through the same valve.Note: To help eliminate valve failure, the valve capshould remain on the valve when line is not bepressurized or adjusted. Any dirt, debris, water orother contaminants can potentially jam the valve orcompromise the sealing surface causing the valve to leak.Part No. Connection ConnectionThreadSealantMEJ607-02 1/4” MNPT 5/16”-32 Male NoMEJ608-02 1/8” MNPT 5/16”-32 Male NoMEJ608B-02 1/8” MNPT 5/16”-32 Male YesPart No.1/4” Hose IDConnectionConnectionApprox.LengthMER432-6 1/8” MNPT 1/4” FNPT 6”MER432-12 1/8” MNPT 1/4” FNPT 12”ME10BTK-1-01Part No. Connection ConnectionME10BTK-1-01 1/8” FNPT 5/16”-32 FemaleCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 117 -

Flex-Vent Regulator Vent KitThe MEC Flex-Vent provides a safe and easy solution to vent LP Gas regulators away from open sources of ignition or otherpotential fire hazards. Meets all requirements of the new flexible material allowance in the 2011 NFPA-58, section 5.8.3.1 (3).MEC Flex Vent Features• Durable, UV stable flexible PVC hose material suitablefor use with LP Gas vapor• 3/4” NPT swivel inlet for easy installation• Standard 90° vent assembly with screen• Mounting clamps and coated masonry screws supplied• Crimped ends for maximum durability• Available in 3, 4, 6 & 10 ft. lengths*ME900-6Part No. Description AccessoriesME960-36 MEC Flex-Vent Kit - Fixed Ends - 3 ft.ME960-48 MEC Flex-Vent Kit - Fixed Ends - 4 ft.ME960-72 MEC Flex-Vent Kit - Fixed Ends - 6 ft.ME960-120 MEC Flex-Vent Kit - Universal Outlet (not crimped) - 10 ft.90° RegulatorVent AssemblyME900-6ME960 SeriesME960-120C MEC Flex-Vent Kit - Universal Outlet (crimped) - 10 ft.* Custom lengths available upon requestLED 12V Light StripUniversal LED Light Strip can be installed anywhere to provide extra lighting right where you need it.LED 12V Light Strip• Bright White LED• Pre-Applied 3M Adhesive backing for easy installation• Can be cut to any lengthPart No.MEP104-95DescriptionLED Light Strip- 118 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

MISCELLANEOUS REGULATORS & ACCESSORIESINTEGRAL TWO STAGE REGULATORSPRESSURE REGULATORS524CEconomical regulator for small loads.11” outlet pressure.ITEM# CAPACITY INLET OUTLET524C 90,000 BTU 1/4” 3/8”APPLIANCE REGULATORS FOR 2 PSI SYSTEMSOARA RegulatorsThe 1/2” and 3/4” regulators include an approvedvent limiter for indoor installations. The 1 1/4” mustbe vented to the outside.ITEM # CAPACITY INLET OUTLET OUT PRES44-1-190-004* 500,000 1/2” 1/2” 7-11”44-1-290-003* 960,000 3/4” 3/4” 7-11”M325-7-11/4 1,000,000 1 1/4” 1 1/4” 11”Accessories: Maxicap-3 Cover for 1/2" RegulatorMaxicap-5 Cover for 3/4" Regulator13A15 Vent Limiter Cap, Cover for 1/2"Regulator13A15-5 Vent Limiter Cap, 3/4" Regulator(*Must be installed in the horizontal position)AUTOMATIC CHANGEOVER REGULATORSHURRICANEH1200Economical, imported regulatorITEM# CAPACITY INLET OUTLET OUTLET PRESSURE(SET PRESSURE)H1200 750,000 1/4” 1/4” 0-30 (20) PSIH1200-60 1,200,000 1/4” 1/4” 30-60 (40) PSIMOUNTING BRACKETSSHERWOOD STREAMLINEBRACKETSPart # Application700-4 740, 750 & 760 Series700-1 720 & 730 SeriesMEGR-900Bracket for Marshall Excelsior Regulators.REGULATOR ADAPTERSINVERTED FLARE PLUGME2131Keeps dirt and foreign material fromentering changeover assemblies like R966and R110.924NRVITEM# CAPACITY INLET OUTLET924NRV 130,000 1/4” INV. FL. 3/8”OUTDOOR GRILL/APPLIANCE REGULATORSTVL202This UL Listed regulator by Rotarex offers greaterflexibility with your outdoor installations. TheTVL202 has a BTU capacity of 140,000 BTU's.The TVL202 comes with the QCC adaptorinstalled as shown.Hose assemblies sold separately.REGULATOR COVERMC48WAdapter with screen 1/4” INV flare x1/4” MNPT converts NPT inlet to invertedflare inlet.ME1002K1/4" inverted flare nut for venting regulatorsin underground installations.R100S e c o n d S t a g e R e g u l a t o r C o v e r.Inexpensive heavy-duty plastic. Top hingetucks under. Light gray color.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 119 -

VALVESOPD VALVESOVERFILL PROTECTIONDEVICE (OPD) VALVEAutomatically shuts off flow of allgas when cylinder is filled to theproper volume.Part # Fits Cylinder Diptube (inches)V21113 5# and 11# squat 3.0"V21130 10# and standard 11# 3.6"150360 20# Steel, Dial Ready 4.0"150361 30# Steel, Dial Ready 4.7"80-8180 20# Steel 4. 0"82-8012 30# Steel 4.7"PV3004A 30# Aluminum 6.0"80-8185 40# Steel 6.4"PV4004A 40# Aluminum 7. 0"POL CONNECTION (CONTINUED)PVE3329BTSame valve but without a fixed levelgauge.PV3329BDB (Dual Bonnet)Valve for cylinders or tanks w/separatepressure relief valves. Has Dual Bonnet foreasy repair without interrupting service.No fixed level gauge. Unit has a pretappedpressure test port.PVE3250C375Valve for cylinders with higher pressureratings. This valve has a built in integralrelief and a start to discharge rating of375 psig.3/4” container connection and POLservice connection. No excess flow andno fixed maximum liquid level gauge.150362 - Dial for 150360 and 150361QCC / OPD VALVE CAPSRegO ® R8555This multivalve allows liquid withdrawalform DOT cylinders up to 100# capacity.POL CONNECTIONB88CQCC dust cover w/ strap. Fits1-5/16” Acme Threads on Type 1QCC Cylinder Valves. Packaged50 per bag.80-5016-10.6Valve for 100# cylinder. Equippedwith 10.6” fixed liquid level gauge.80-3135-11.0Valve for cylinders or tanks withseparate pressure relief valves, i.e. amulti-port 420# cylinder. Comes with11.0” fixed liquid level gauge. Unithas a pre-tapped pressure test port.PV2030BCA multi-purpose valve with double backcheck filler valve. Relief valve capacityfor up to 200# cylinders. Comes with a11.2” dip tube for 100# cylinders. Longerdip tubes are available.INLET: 3/4” - 14 NGTOUTLET: POLPV2035A375Multi-purpose valve combines a serviceline valve, a back check filler valve withsecondary back check, a relief valve,and a fixed liquid level gauge. Relief valvecapacity for up to 420# cylinders. Unit hasa pre-tapped pressure test port.INLET: 1” - 11 1/2 NGTOUTLET: POLPRESSURE RELIEF SETTING: 375 psigPV2035A250Same as PV2035A but relief valve setting is250 psig for ASME 420# cylinders. Unit hasa pre-tapped pressure test port.- 120 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

VALVESMOTOR FUEL INTERNAL RELIEF VALVESMULTIVALVESDISCHARGEITEM# SIZE PSIG66-1135 1” 25066-1242 1” 31266-1127 1” 375MEH503 & MEH502Adjustable Relief Valve Cap3/4'' to 1-1/4'' - VinylThese covers are intended to protect bothinternal & external relief valves ranging insize from 1/2” to 1-1/4” NPT from moistureand/ or other possible contaminants. Usingour universal “shower cap” style reliefvalve covers will allow technicians to carrytwo sizes that will protect the majority ofdomestic tank relief valves.Features:• Made with durable UV stable yellowvinyl material• Fits 1/2” to 1-1/4” NPT internal andexternal relief valvesPart No. Description MaterialMEH502 Adjustable Relief Valve Cover 1/2” to 3/4” Yellow VinylMEH503 Adjustable Relief Valve Cover 3/4” to 1-1/4” Yellow VinylSHERWOOD PV2033CLDB1 1/4” Acme vapor return, fixed maximumliquid level gauge and service shut off.Dip tube length: 15”. Unit has a pretappedpressure test port. With the PrestoTap option, leak test can be performedat the valve without breaking the line.INLET: 3/4” MNPTOUTLET: FPOLSHERWOOD PV2098ACluster valve for ASME undergroundtanks with surface area up to 300 sq ft.Includes filler valve, service valve, vaporreturn, relief valve, and outage valve.Unit has a pre-tapped pressure test port.INLET: 2 1/2” FNPTOUTLET: FPOLRegO ® R8593ARCombines filler valve, vapor return,service valve, fixed liquid level gauge,and tapped and plugged gauge boss.INLET: 1 1/2” MNPTOUTLET: FPOLFILLER VALVES & VAPOR RETURN VALVESPV187666-126166-1262Vapor return and excess flow valve has upperpositive back check valve. Attachmentof the vapor hose coupling with projectingnozzle opens the back check to permit flowin both directions.INLET: 3/4” MNPTOUTLET: 1 1/4” ACMED1134Locking cap for 1 3/4” ACME filler valves.INTEGRATED FILLER VALVES- Double back-check filler valve with integralemergency shut-off ball valve: ALL-IN-ONESOLUTION.- Both these valves are double back check fillervalves where there are:(1) a soft seated upper back check, and(2) a metal-to-metal lower back check seat.- Eliminate the need for installing expensive andun-reliable filler hose adapter as a temporary fixto a failed or leaky filler valve.- Permits safe filler valve maintenance withouttank evacuation.- These two versions can be used either forunderground or above ground.DOMESTIC TANK RELIEF VALVESINTERNAL SPRING RELIEF VALVES250 psig for 250-1000 gallon tanksCapacity ReplacementPart # Inlet Tank Size CFM Air Cap66-1128 3/4” 250 gal 1970 10.0.950.020366-1129 1” 500 gal 2510 10.0.950.020466-1130 1 1/4” 1000 gal 4370 10.0.950.020566-1135 1” Vert 120 987 10.0.110.5032RELIEF VALVES FOR LARGE ASME TANKSFLANGE TYPE FULLINTERNAL RELIEF VALVEFor 3” modified and 4” flanges.Replacement for AC&F relief valves.Two required on 30,000 gal. tank.Part # Mfg. Tank Conn. SCFM Capacity Pipeaway Thread Size4MBF-A-250 BPS 3” Modified or 4” Flange 15452 4” FNPT37-0005-04 - Gasket Gasket sold separatelyRELIEF VALVE STACK RAINCAPSProtection for vertical relief valveriser pipes.Part #Pipe SizeRC300-06 3/4”RC300-08 1”RC300-16 2”RC300-20 2 1/2”RC300-24 3”CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 121 -

AIR CONNECTIONS & VALVESAIR LINE, VALVES, TUBING & FITTINGSItem No.WR1924-01WRSPMT-4WR1170-4-4WR1168x4WR1168x4x4WR1169x4WR1169x4x4IEM378463Flip Lever Air Valve.1/8" inlet & outletIEST146749Push/Pull Air Valve1/8" inlet & outletDescription1/4” OD Black DOT Tubing1/4” OD Union1/4” OD Tee1/4” OD x 1/8” MPT Adaptor1/4” OD x 1/4” MPT Adaptor1/4” OD x 1/8” MPT 90° Adaptor1/4” OD x 1/4” MPT 90° AdaptorBAV0303 way, 2 position air valvewith mounting bracket.Compression fitting inlet& outletCA-PBHeavy duty air valve mounted in a weatherproofenclosure. Quick connect inlet & outletLIQUID TRANSFER VALVESME671D-8Liquid withdrawal valve with 58GPM excess flow valve and integralhydrostatic relief valve. 1 1/4” inlet x 1”outlet. Designed for installation in 1 1/4”liquid opening in bottom of ASME tank.QUICK ACTING HOSE END VALVESSQUIBB-TAYLOR AL424Special Quick Acting Acme FillingMinimum bleed Coupling and ValveA special locking clip on a spring actuatedlocking handle minimizes the chance ofaccidental opening. By locating the seatdisc in the bottom of the filler coupling,the AL343P minimizes leakage whendisconnecting. Ball bearings in the seatdisc assembly allow the entire assemblyto rotate when the disc touches the seat.This helps prevent wear and cutting of thedisc, giving longer service life.Part # Inlet OutletAL424 3/4” 1-3/4” F. AcmeBE3L-063 Way Valve3/4” bottom entry 3 way positive shut offvalve. Body is forged brass with teflonseats and seals. Rated to 350 psi.QUICK ACTING HOSE END VALVES (CONTINUED)GASGUARD GG1ENEEDLE VALVESLOG LIGHTER VALVESHEATER VALVESBALL VALVESMinimum Bleed “Gasoline - Style” motorfuel dispensing nozzle. Safety features:must be connected to a filler valve toopen. Cannot be disconnected fromfiller valve while lever is in open position.INLET: 3/4” FNPTOUTLET: 1-3/4” AcmeSTEEL NEEDLE VALVESPart#SizeNV02A1/4” FPT x 1/4” FPT Angle ValveBRASS NEEDLE VALVESPart#SizeVA1081/8” MPT x 1/8” MPTPart# Description EscutcheonL102-803 1/2” Straight Valve ChromeL102-804PB 1/2” Straight Valve BrassL102-813 1/2” Angle Valve ChromeL102-814PB 1/2” Angle Valve BrassL102-827 10” Brass KeyANGLE HEATER VALVESPart#SizeME-90NL-02 3/8” x 1/4”ME-90NL-03 3/8” x 3/8”STRAIGHT HEATER VALVEPart#SizeME-82NL-02 3/8” x 1/4”JOMAR BALL VALVESInexpensive 2-piece forged full port brassvalve for vapor or liquid service (400 psigWOG)Part#SizeJ100-701 1/4”J100-702 3/8”J100-703 1/2”J100-704 3/4”J100-705 1”J100-706* 1 1/4”J100-707* 1 1/2”J100-708* 2”J100-710 3”* Add “H” to part # for locking handle- 122 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

BALL VALVESBALL VALVES (CONTINUED)BALL VALVE REPAIR PARTSInexpensive 2-piece forged full port brass valve for vapor or liquidservice (400 psig WOG)Part# DescriptionJ899-701 1/4" Handle OnlyJ899-701N Nut for 1/4" HandleJ899-704 3/4" Handle OnlyJ899-705 1" & 1-1/4" Handle OnlyJ899-705N Nut for 1" HandleJ899-708 2" Handle OnlyJ899-918 2" Repair Kit for J500-308J899-906 1 1/2" Handle OnlyBALL VALVESITEM#S92B42S92C42JOMAR UNION END BRASS FULLPORT BALL VALVESSame as J100 series but has built in union onone end.Part# SizeJ160-102 3/8”J160-103 1/2”J160-104 3/4”J160-105 1”JOMAR CARBON STEELDOUBLE UNION BALL VALVEPart # SizeJ100-996 1 1/4”J100-997 1 1/2”J100-998 2JOMAR CARBON STEELBALL VALVESIZE1/4” MXF3/8" MXFPart # SizeJ100-956 1 1/4”J100-957 1 1/2”J100-958 2JOMAR “BOLTED” 3 PIECE BALLVALVE Full port - black or stainless steelPart # Size MaterialJ500-306 1 1/4” StainlessJ500-406 1 1/4” BlackJ500-307 1 1/2” StainlessJ500-407 1 1/2” BlackJ500-308 2” StainlessJ500-408 2” BlackCMDIB800 3" MARPACBALL VALVES - LOW PRESSUREWe stock valves manufactured by Jomar. The Jomar valves havea ”T” style handle that can be removed and reversed to lock thevalve. We can order the Legend and Rub, which have a “teardrop”handle that allows for installation close to a wall or floor where “T”handle valves will not open or close because of interference withthe wall or door. The valves with a L prefix are available only fromLegend. The valves with a J prefix can be ordered from Rub bysubstituting an R for the J in the part number.FNPT X HOSE BARBCarton SidePart# Size Qty. TapL102-413 1/2” FNPT x 1/8” MNPT/Hose Barb 10 NOFNPT X FNPT*Also Available as JomarPart# Size Carton Qty. Side TapJ101-402 3/8” FNPT 12 NOJ101-403 1/2” FNPT 12 NOJ101-404 3/4” FNPT 12 NOL102-105 1” FNPT 10 NOJ102-302 3/8” FNPT 10 YESJ102-303 1/2” FNPT 10 YESJ102-304 3/4” FNPT 10 YESFNPT X FLAREPart# Size Carton Qty. Side TapJ101-502 1/2” FNPT x 3/8” FL 14 NOJ101-503 1/2” FNPT x 1/2” FL 14 NOL102-118 3/4” FNPT x 1/2” FL 10 NOL101-504 3/4” FNPT x 5/8” FL 10 NOFLARE X FLAREPart# Size Carton Qty. Side TapJ101-601 3/8”FL x 1/2” FL 12 NOJ101-602 3/8” FL x 3/8” FL 12 NOJ101-603 1/2”FL x 1/2” FL 12 NOJ101-604 5/8” FL x 5/8” FL 12 NOJ102-402 3/8” FL x 3/8” FL 10 YESJ102-403 1/2” FL x 1/2” FL 12 YESJ102-404 5/8” FL x 5/8” FL 10 YESMNPT X FLAREPart# Size Carton Qty. Side TapJ101-702 1/2” MNPT x 3/8” FL 12 NOJ101-703 1/2” MNPT x 1/2” FL 12 NOCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 123 -

VALVES & APPLIANCE CONNECTORSLOCK WING METER VALVESBRASS METER VALVESPart#SizeGV217-1/2 1/2”S80E41 3/4"8509910 BARRELL LOCKLocks Meter Stop Valves.8610005 KEYExtra Key for 8509910 Lock.DORMONT APPLIANCE CONNECTORS (CONT)DRYER AND FURNACE CONNECTORS3/8” ID - 1/2” ODPart # Length NPT Connections*D20-3132-12 12” 1/2” MXF*D20-3132-18 18” 1/2” MXF*D20-3132-24 24” 1/2” MXF*D20-3132-36 36” 1/2” MXFD20-3132-48 48” 1/2” MXFD20-3132-60 60” 1/2” MXFD20-3132-72 72” 1/2” MXF*Add an "A" after D20 for black epoxy, i.e., D20A-3122-XX, up to 36".VALVE GREASEQVA1262 oz. tube of Graphite Valve GreaseDOMESTIC RANGE CONNECTORS1/2” ID - 7/8” ODPart # Length NPT ConnectionsD30-3132-12 12” 1/2” MXFD30-3132-24 24” 1/2” MXFD30-3132-36 36” 1/2” MXFD30-3132-48 48” 1/2” MXFD30-4141-24 24” 3/4” MXMD30-4141-48 48” 3/4” MXMD30-4142-12 12” 3/4” MXFD30-4142-24 24” 3/4” MXFD30-4142-36 36” 3/4” MXFD30-4142-48 48” 3/4” MXFCOMMERCIAL CONNECTORSCommercial connectors come with quickdisconnect and are rated for restaurantservice.DORMONT APPLIANCE CONNECTORSDORMONT APPLIANCECONNECTORS• Flexible stainless steel• AGA listed for indoor or outdoor use• Now available with high temperatureblack epoxy coating for hearth applicationsHEATER CONNECTORS1/4” ID - 3/8” ODPart # Length NPT Connections*D10-2122-12 12” 3/8” MXF*D10-2122-18 18” 3/8” MXF*D10-2122-24 24” 3/8” MXF*D10-2122-36 36” 3/8” MXFD10-2122-48 48” 3/8” MXFD10-2122-60 60” 3/8” MXF*Add an “A” after D10 for black epoxy, i.e., D10A-2122-XX, up to 36".Part # Length NPT ConnectionsD1650BPQ36 36" 1/2" MXMD1650BPQ48 48" 1/2" MXMD1675BPQ36 36" 3/4" MXMD1675BPQ48 48" 3/4" MXMDOMESTIC WHISPERFLEXHEATER CONNECTORS3/8” - 1/2” Black CoatedThis durable, corrosion-resistant stainless steel gas connector isconfigured with pipe threaded fittings for installation. Engineeredfor high BTU applications, noise disruptors have been added toprovide silent gas flow in high volume gas applications. Designedwith safety in mind, this CSA approved gas connector is commonlyused for the installation of home appliances such as gas logs andspace heaters.Part # Length NPT ConnectionsD10ANW212212 12” 3/8” MXFD10ANW212212 18” 3/8” MXFD10ANW212212 24” 3/8” MXFD10ANW212212 18” 3/8” MXFD10ANW212212 12” 1/2” MXFD10ANW212212 18” 1/2” MXFD10ANW212212 24” 1/2” MXF- 124 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

GASKETS & O-RINGSORINGSWASHERSAll are actual sizeAll are actual size.EABCDFGPart # DescriptionA 1H2917 3 1/4” ACME O-ring. Replaces flatwasher used on 3 1/4” ACME filler valves.B T12655 2 1/4” ACME O-ring. Replaces flatwasher used on 2 1/4” ACME vaporreturn and filler valves.C 1E8124-O 1 3/4” ACME O-ring. Replaces flatwasher used on 1 3/4” ACME filler valves.D T11673 Slippery O-ring. Internal O-ring for lifttruck safety check connectors. Alsoused as emergency POL seal.E T12945 POL O-ring. Fits POL cylinder fillingconnector.EPart # DescriptionA 1E8128 3 1/4” ACME tank truck filler valve washerB 1E8126 2 1/4” ACME tank truck vapor returnwasherC 1E8124 1 3/4” ACME standard bulk tank filler valveand lift truck valve washerD 1E8122 1 1/4” ACME standard bulk tank vaporreturn valve washerE R7141M-3 1 1/4” ACME flat washer for use on lifttruck cylinder safety check connectorsF VISSGG Senior gauge washerG VISJGG Junior gauge washerCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 125 -

BRASS FITTINGSCOMPRESSION FITTINGSCOMPRESSION NUTSItem #Description61A 1/8" Compression Nut61B 3/16" Compression Nut61C 1/4" Compression Nut61D 5/16" Compression Nut61E 3/8" Compression NutFLARED FITTINGS - SAE 45° FLARECOMPRESSION SLEEVESItem #Description60A 1/8" Compression Sleeve60B 3/16" Compression Sleeve60C 1/4" Compression Sleeve60D 5/16" Compression Sleeve60E 3/8" Compression SleeveFLARE NUT (FORGED)Item # FlareNS4C 1/4"NS4E 3/8"NS4F 1/2"NS4I 5/8"NS4K 3/4"REDUCING FLARE NUT (FORGED)Item # Flare x FlareNRS4EC 3/8" x 1/4"NRS4FE 1/2" x 3/8"NRS4IF 5/8" x 1/2"COUPLINGS *FLARE TO MALE PIPE THREAD* Add “L” prefix to part number for along couplingItem # Flare x MPT48CA 1/4" x 1/8"48CC 1/4" x 1/4"48CE 1/4" x 3/8"48EA 3/8" x 1/8"48EC 3/8" x 1/4"48EE 3/8" x 3/8"48EF 3/8" x 1/2"48EK 3/8" x 3/4"48FC 1/2" x 1/4"48FE 1/2" x 3/8"48FF 1/2" x 1/2"48FK 1/2" x 3/4"48IE 5/8" x 3/8"48IF 5/8" x 1/2"48IK 5/8" x 3/4"48KF 3/4" x 1/2"48KK 3/4" x 3/4"FLARED FITTINGS (CONTINUED)FLARE TO FLAREItem # Flare x Flare42C 1/4" x 1/4"42E 3/8" x 3/8"42F 1/2" x 1/2"42I 5/8" x 5/8"42K 3/4" x 3/4"Flare to Female Pipe ThreadItem # Flare x FPT46CC 1/4" x 1/4"46EC 3/8" x 1/4"46EE 3/8" x 3/8"46EF 3/8" x 1/2"46EK 3/8" x 3/4"46FC 1/2" x 1/4"46FE 1/2" x 3/8"46FF 1/2" x 1/2"46FK 1/2" x 3/4"46IF 5/8" x 1/2"46IK 5/8" x 3/4"46KF 3/4" x 1/2"46KK 3/4" x 3/4"REDUCING COUPLINGSFlare to FlareItem # Flare x Flare42EC 3/8" x 1/4"42FC 1/2" x 1/4"42FE 1/2" x 3/8"42IE 5/8" x 3/8"42IF 5/8" x 1/2"42KF 3/4" x 1/2"42KI 3/4" x 5/8"FORGED ELBOWS*Flare to Male Pipe ThreadItem # Flare x MPT49CA 1/4" x 1/8"49CC 1/4" x 1/4"49CE 1/4" x 3/8"49EC 3/8" x 1/4"49EE 3/8" x 3/8"49EF 3/8" x 1/2"49EK 3/8" x 3/4"49FC 1/2" x 1/4"49FE 1/2" x 3/8"49FF 1/2" x 1/2"49FK 1/2" x 3/4"49IE 5/8" x 3/8"49IF 5/8" x 1/2"49IK 5/8" x 3/4"49KK 3/4" x 3/4"* For 45° elbow, substitute 47 for49 in the item number- 126 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

BRASS FITTINGSFLARED FITTINGS (CONTINUED)Flare to FlareItem # Flare x Flare55C 1/4" x 1/4"55E 3/8" x 3/8"55F 1/2" x 1/2"55I 5/8" x 5/8"55K 3/4" x 3/4"55FE 1/2" x 3/8"55IE 5/8" x 3/8"55IF 5/8" x 1/2"Flare to Female Pipe ThreadItem # Flare x FPT54CC 1/4" x 1/4"54EC 3/8" x 1/4"54EE 3/8" x 3/8"54EF 3/8" x 1/2"54EK 3/8" x 3/4"54FC 1/2" x 1/4"54FE 1/2" x 3/8"54FF 1/2" x 1/2"54FK 1/2" x 3/4"54IF 5/8" x 1/2"54IK 5/8" x 3/4"FORGED CONNECTORSSwivel ConnectorItem # FlareUS4C 1/4"US4E 3/8"US4F 1/2"US4I 5/8"US4K 3/4"PLUGS AND CAPSFlare Fitting PlugItem # FlareP2C 1/4"P2E 3/8"P2F 1/2"P2I 5/8"P2K 3/4"Flare CapsItem # FlareN5C 1/4"N5E 3/8"N5F 1/2"N5I 5/8"N5K 3/4"FLARED FITTINGS (CONTINUED)ACBFORGED TEESFlare to Flare toMale Pipe ThreadItem # Flare X MPT45EEC 3/8" x 1/4"45EEE 3/8" x 3/8"45EEF 3/8" x 1/2"45FFE 1/2" x 3/8"45FFF 1/2" x 1/2"45IIF 5/8" x 1/2"Flare to Flare to FlareItem # Flare44C 1/4"44E 3/8"44F 1/2"44I 5/8"44K 3/4"FORGED REDUCING TEESFlare to Flare to FlareItem # A B C44EEF 3/8" 3/8" 1/2"44EEI 3/8" 3/8" 5/8"44FEE 1/2" 3/8" 3/8"44FEF 1/2" 3/8" 1/2"44FFE 1/2" 1/2" 3/8"44FFI 1/2" 1/2" 5/8"44IFF 5/8" 1/2" 1/2"44IFI 5/8" 1/2" 5/8"44IIE 5/8" 5/8" 3/8"44IIF 5/8" 5/8" 1/2"FORGED CROSSItem # FlareC1E 3/8"C1F 1/2"C1I 5/8"SEAL BONNETSItem # Tubing O.D. SizeB1C 1/4”B1D 3/8”B1E 1/2”B1F 5/8”B1I 3/4”CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 127 -

COPPER & ACCESSORIESTUBING/TOOLSCOPPER REFRIGERATIONTUBINGPart # Coil Length O.D. SizeY02X50 50’ 1/4”Y03X50 50’ 3/8”Y03X100 100’ 3/8”Y04X50 50’ 1/2”Y04X100 100’ 1/2”Y05X50 50’ 5/8”Y05X100 100’ 5/8”TUBING/TOOLS (CONTINUED)NP512ROTHENBERGER (PAPCO)TUBE CUTTERReplacementPart #NP512CWNP51250NP51240NP51211DescriptionCutting WheelCutting Wheel PinRetaining RingTriangle ReamerNP420 ROTHENBERGER(PAPCO) SWING RELEASEFLARING TOOLCOPPER TYPE K TUBINGPart # Coil Length I.D. SizeYK02X60 60’ 1/4”YK02X100 100’ 1/4”YK03X60 60’ 3/8”YK03X100 100’ 3/8”YK04X60 60’ 1/2”YK04X100 100’ 1/2”ReplacementPart #NP41900NP42000DescriptionRollerRoller PinROL945THROLO-FLAIR FLARING TOOLYELLOW POLYETHYLENECOATED COPPER TUBINGCoating identifies the tubing as agas line. Easy to install and costefficient.Part # Coil Length O.D.Size13850 50’ 3/8”138100 100’ 3/8”11250 50’ 1/2”112100 100’ 1/2”15850 50’ 5/8”158100 100’ 5/8”J TUBING CLIPSPart # O.D. Size419-3/8-1/2 3/8", 1/2"419-5/8 5/8"COPPER TUBING BENDERSPart # O.D.SizeLC630E 3/8”LC630F 1/2”LC630I 5/8”BRASS PIPE FITTINGSBRASS NIPPLESPart # MNPT LengthB122AA 1/8” Close w/ hexB122CC 1/4” Close w/ hexB113C 1/4” CloseB113C11/2 1/4” 1 1/2”B113C2 1/4” 2”B113C21/2 1/4” 2 1/2”B113C3 1/4” 3”B122EE 3/8” Close w/ hexB113E2 3/8” 2”B113F11/2 1/2” 1 1/2”B113F2 1/2” 2”B113F3 1/2” 3”B113F4 1/2” 4”B113F5 1/2” 5”B113F6 1/2” 6”B113K11/2 3/4” 1 1/2”B113K2 3/4” 2”B113K5 3/4” 5”- 128 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

BRASS PIPE FITTINGSBRASS PIPE FITTINGS (CONTINUED)BUSHINGSPart # MNPT FNPTB110CA 1/4” 1/8”B110EA 3/8” 1/8”B110EC 3/8” 1/4”B110FA 1/2” 1/8”B110FC 1/2” 1/4”B110FE 1/2” 3/8”B110KC 3/4” 1/4”B110KF 3/4” 1/2”B110MK 1” 3/4”BRASS PIPE FITTINGS (CONTINUED)TEESPart # FNPTB101A 1/8”B101C 1/4”B101E 3/8”B101F 1/2”B101K 3/4”ELBOWSPart #FNPTB100C 1/4”B100E3/8” (3000psi)B100F 1/2”B100K 3/4”STREET ELBOWSCOUPLERSPart # FNPT FNPTB103C 1/4” 1/4”B103E 3/8” 3/8”Part # NPT (Forged Brass)B116A 1/8”B116C 1/4”B116E 3/8”STREET TEEPart #SizeB105A 1/8”ADAPTERSFemale to MalePart # FNPT MNPTB120CA 1/4” 1/8”B120EC 3/8” 1/4”PLUGSPart # MNPTB121C 1/4”B121E 3/8”CROSSESPart #FNPTB102C 1/4”B102F 1/2”CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 129 -

PIPE FITTINGSSTANDARD AND EXTRA HEAVY PIPE NIPPLESPIPE SIZING CODEPIPE I.D. CODE (**)1/8" 011/4” 023/8” 031/2” 043/4” 061” 081 1/4” 101 1/2” 122” 163” 32STANDARD AND EXTRA HEAVY PIPE NIPPLESSCHEDULE 40 GALVANIZEDPIPE NIPPLESItem # Pipe Sizes Lengths40N**X##G 3/8” - 1 1/4” Close - 12”- Example - 1/2” x 3” nipple would be 40N04X30GCONCENTRIC SWAGE NIPPLESItem #SizesS**X** 1/2” - 3” X 1/4” - 2 1/2”- Example - 3/4” x 1/2” nipple would be S06X04PIPE LENGTH CODE (##)CLOSE 01 1/2” 152” 202 1/2” 253” 303 1/2” 354” 404 1/2” 455” 50Etc.Etc.SCHEDULE 40 & SCHEDULE 80 BLACK PIPESCHEDULE 40 SCHEDULE 80Item # SIZES ITEM# SIZESZ**40 3/8” - 3” Z**80 1/2” - 3”- Schedule 40 pipe comes threaded and coupled- Add CW to the part number for coated and wrapped pipe(Special Order)PIPE WRAPSCHEDULE 80 EXTRA HEAVYPIPE NIPPLESPW1002" x 100', 10 mil pipe wrap• Corosion protection for metal andplastic pipe.• For use on underground pipeinstallations.Item # Pipe Sizes LengthsN**X## 1/4” -3” Close - 12”- Example - 1/2” x 3” nipple would be N04X30SCHEDULE 40 BLACKMALLEABLE PIPE NIPPLESItem # Pipe Sizes Lengths40N**X##B 3/8” - 1 1/4” Close - 12”- Example - 1/2” x 3” nipple would be 40N04X30BTHREADED FLANGEFT24X163” Flange x 2” MPTGasket: T10561FLEX GASKET KITS:Includes bolt, nut and gasketBGN-10, 1 1/4"BGN-16, 2"BGN-24, 3"BGN-32, 4"- 130 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

PIPE FITTINGSPIPE FITTINGSFORGED STEEL PIPE FITTINGS, 2000# AND 3000# THREADED90° Elbow45° Elbow 90° Street ElbowCouplingTeeCrossHex Head PlugUnionITEM 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 3”45° Elbow E02452 E03452 E04452 E06452 E08452 E10452 E12452 E16452 E2445290° Elbow E02902 E03902 E04902 E06902 E08902 E10902 E12902 E16902 E2490290° Street Elbow ES02903 ES03903 ES04903 ES06903 ES08903 ES10903 ES12903 ES16903Coupling C023 C033 C043 C063 C083 C103 C123 C163 C243Tee T022 T032 T042 T062 T082 T102 T122 T162 T242Cross X022 X032 X042 X062 X082 X102 X122 X162 X242Hex Head Plug HP02 HP03 HP04 HP06 HP08 HP10 HP12 HP16 HP24Union U023 U033 U043 U063 U083 U103 U123 U163 U243FORGED STEEL BUSHINGSMALE PIPE THREAD (A)FEMALE PIPE THREAD (B) 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 3”1/8” B02X01 B03X01 B04X01 B06X01 B08X01 B10X01 B12X01 B16X01 B24X011/4” B03X02 B04X02 B06X02 B08X02 B10X02 B12X02 B16X02 B24X023/8” B04X03 B06X03 B08X03 B10X03 B12X03 B16X03 B24X031/2” B06X04 B08X04 B10X04 B12X04 B16X04 B24X043/4” B08X06 B10X06 B12X06 B16X06 B24X061” B10X08 B12X08 B16X08 B24X081 1/4” B12X10 B16X10 B24X101 1/2” B16X12 B24X122” B24X16CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 131 -

PIPE FITTINGSFORGED STEEL REDUCERSFEMALE PIPE THREAD (A)FEMALE PIPETHREAD (B) 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 3”1/8” CR02X01 CR03X01 CR04X01 CR06X01 CR08X01 CR10X01 CR12X01 CR16X01 CR24X011/4” CR03X02 CR04X02 CR06X02 CR08X02 CR10X02 CR12X02 CR16X02 CR24X023/8” CR04X03 CR06X03 CR08X03 CR10X03 CR12X03 CR16X03 CR24X031/2” CR06X04 CR08X04 CR10X04 CR12X04 CR16X04 CR24X043/4” CR08X06 CR10X06 CR12X06 CR16X06 CR24X061” CR10X08 CR12X08 CR16X08 CR24X081 1/4” CR12X10 CR16X10 CR24X101 1/2” CR16X12 CR24X122” CR24X16SCHEDULE 40 BUSHINGS (BLACK OR GALVANIZED)For galvanized bushings, substitute suffix G for B in part number.MALE PIPE THREAD (A)FEMALE PIPE THREAD (B) 3/8” 1/2” 3/4” 1” 1 1/4”1/4” 40B03X02B 40B04X02B 40B06X02B 40B08X02B 40B10X02B3/8” 40B04X03B 40B06X03B 40B08X03B 40B10X03B1/2” 40B06X04B 40B08X04B 40B10X04B3/4” 40B08X06B 40B10X06B1” 40B10X08BDIELECTRIC (INSULATED) UNIONSPART #SIZE FPTJ701-403 1/2”J701-404 3/4”J701-405 1”J701-406 1 1/4”J701-407 1 1/2”J701-408 2”100-7575-00 Galvanized 3/4"- 132 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

PIPE FITTINGS & SMART HOSESTANDARD SCHEDULE 40 PIPE FITTINGS (BLACK OR GALVANIZED)For galvanized fittings, substitute suffix G for B in part number.ITEM 1/4” 3/8” 1/2” 3/4” 1” 1 1/4” 1 1/2” 2”45° Elbow 40E0245B 40E0345B 40E0445B 40E0645B 40E0845B 40E1045B 40E1245B 40E1645B 90°Elbow 40E0290B 40E0390B 40E0490B 40E0690B 40E0890B 40E1090B 40E1290B 40E1690B 90°Street Elbow 40ES0290B 40ES0390B 40ES0490B 40ES0690B 40ES0890B 40ES1090B 40ES1290B 40ES1690BCoupling 40CP02B 40CP03B 40CP04B 40CP06B 40CP08B 40CP10B 40CP12B 40CP16BUnion 40U02B 40U03B 40U04B 40U06B 40U08B 40U10B 40U12B 40U16BTee 40T02B 40T03B 40T04B 40T06B 40T08B 40T10B 40T12B 40T16BCap 40C02B 40C03B 40C04B 40C06B 40C08B 40C10B 40C12B 40C16BPlug 40SP02B 40SP03B 40SP04B 40SP06B 40SP08B 40SP10B 40SP12B 40SP16B*Replace suffix B with G for GalvanizedSCHEDULE 40 STANDARDREDUCING COUPLINGS(BLACK OR GALVANIZED)For galvanized couplings, substitutesuffix G for B in part number.SCHEDULE 40 STANDARDREDUCING 90° ELBOW(BLACK OR GALVANIZED)For galvanized elbow, substitute suffix Gfor B in part number.PART # SIZE40CR04X03B 1/2” X 3/8”40CR06X04B 3/4” X 1/2”40CR08X04B 1” X 1/2”40CR08X06B 1” X 3/4”*Replace suffix B with G for GalvanizedPART # SIZE40ER06X04B 3/4” X 1/2”40ER08X04B 1” X 1/2”40ER08X06B 1” X 3/4”40ER10X08B 1 1/4” X 1”*Replace suffix B with G for GalvanizedSMART-HOSE ASSEMBLIESLifeline 3 incorporates an internal coated cable connected to normallyunseated “Valve Flappers” located on each end of the cable.In the event of hose separation, coupling ejection or catastrophichose failure the “Valve Flappers” are released and instantly seat,stopping the flow of product in both directions.Part #R05016330180R05016800180R05016330222R05016800222Size2" FNPT x 15’ with integral break-away coupling2" FNPT x 15’ (Bulk Plant - Not DOT Approved)2" FNPT x 18.5’ (DOT approved for transports)2" FNPT x 18.5’ with integral break-away couplingCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 133 -

SAFETY & DELIVERY HOSELIFEGUARD SAFETY HOSE TECHNOLOGYThe LIFEGUARD TM Safety Hose technology is designed to eliminatethe consequences of the hazardous effect of drive-away, couplingseparation, hose rupture or failure during liquid transferoperations. Breakaway couplingand engineered compressionspring (ECP) are key benefits ofthis technology. The ECP can beadjusted to regulate flow pressureto prevent premature checkingand in the event of system failure,stops flow in both directions.HOSE/FLEXIBLE CONNECTORSProvides the highest degree ofprotection in the event of:•hose separation•coupling to hose separation•drive away scenariosThe other main advantage is thethe GPSS hose comes with femalepipe thread ends to that anACME adapter can be installedwith and additional coupling.Part #GPSS16x15BULK HOSEHigh Pressure Rubber LP-Gas Hose• Minimum burst pressure - 1750 psig• Working pressure - 350 psig• UL listed• Two braid• Delivered in bulk hose reels orspecified cut lengthItem # I.D. (in.) O.D. (in.) Crimp on App. ReelCoupling # LengthG02 1/4" 21/32" N/A 600’G03 3/8" 3/4" G03NP 600’G04 1/2" 15/16" G04NP 600’G06 3/4" 1-1/4" G06NP 500’G08 1" 1-1/2" G08NP 300’G10 1-1/4" 1-13/16" G10NP 300’G12 1-1/2" 2-1/8" G12NP 100’G16 2" 2-3/4" G16NP 100’1” BOBTAIL HOSEASSEMBLIESDescription2" FNPT x 15' LPGHose AssemblyGPSS16x18.5 2" FNPT x 18.5' LPGHose AssemblyAssemblies for bulk truck liquid service,complete with permanent connections.Item #Goodall Length ConnectionsGC08-100' 100’ 1” MNPTGC08-125' 125’ 1” MNPTGC08-150' 150’ 1” MNPTHOSE/FLEXIBLE CONNECTORS (CONTINUED)SCUFF GUARDHeavy duty vinyl wrap protects your hose from abrasion.Increases hose lifesignificantly.Sold per foot.LP-Gas Engine Fuel HoseItem #Fits Hose SizeSCUFF-06 3/4”SCUFF-08 1”SCUFF-10 1 1/4”SCUFF-16 2”Item # Hose I.D. Hose O.D. Min. Burst WorkingPressureA4QW-A 3/16” .52” 2000 psi 350 psiA6QW-D* 5/16” .67” 2000 psi 350 psiA8QW-A 13/32” .77” 2000 psi 350 psiA10QW-A 1/2” .92” 2000 psi 350 psiA12QW-A 5/8” 1.08” 2000 psi 350 psi* Add suffix R for rubber coated hoseGVH1001” Carburetion Vapor HoseGVH585/8” Carburetion Vapor HoseHIGH PRESSURELIQUID HOSE ASSEMBLIES350 psig Working PressurePre-made 1/2" through 2” hose assembliesin various lengths.Item # DescriptionGC04-XX” 1/2” hoseGC06-XX” 3/4” hoseGC08-XX” 1” hoseGC10-XX” 1 1/4” hoseGC12-XX” 1 1/2” hoseGC16-XX” 2” hose*Hoses less than 2' are measured in inchesSTAINLESS STEEL FLEXIBLECONNECTORSAny length can be special ordered. Alsoavailable with union end.SIZE MALE BY MALE MALE BY FEMALE3/4” x 12” LF06X120 ———-3/4” x 18” LF06X180 ———-1” x 10” LF08X100 ———-1” x 14” LF08X140 ———-1” x 16” LF08X160 ———-1” x 18” LF08X180 ———-1 1/4” x 16” LF10X160 LFU10X1601 1/4” x 18” LF10X180 ———-1 1/2” x 18” LF12X180 ———-2” x 18” LF16X180 LFU16X1803” x 18” LF24X180 ———-3” x 24” LF24X240 LFU24X240- 134 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

FLEXIBLE CONNECTORS & HOSE ACCESSORIESHOSE COUPLINGSSWIVEL HOSE ADAPTERUNIONSTapered nose in swivel end makes up atight metal to metal ground joint unionwith standard male pipe hose couplings.Size Female x Male Swivel Female x Female Swivel1/4” A2045-4-4 A2046-4-41/2” A2045-8-8 A2046-8-83/4” A2045-12-12 A2046-12-121” A2045-16-16 A2046-16-161-1/4” A2045-20-20 A2046-20-201-1/2” A2045-24-24 A2046-24-242” A2045-32-32 A2046-32-32QUICK DISCONNECT COUPLINGSQW HOSE COUPLING WITHHYDROSTATIC RELIEFCONNECTIONME83465/16” I.D. X 3/8” O.D.Female Flare Swivel X 1/4” FNPTAllows hydrostatic relief valve to beinstalled at safest, most protected position.The MHC8346 has a 3/4” female flareswivel on the tank valve end. The oppositeend is a two piece reusable hose fittingfor 5/16” I.D. stainless steel braid LP hose.HIGH AND LOWPRESSURE COUPLINGSItem #EF276190EF276187Description1/4” FNPT X 1/4” MNPT3/8” FNPT X 3/8” MNPTLOW PRESSURE COUPLINGSItem #SizeSocket PlugH100-006 H100-506 3/8”H100-008 H100-508 1/2”H100-010 H100-510 3/4”H100-012 H100-512 1”TYPE 2 COUPLINGSMale Quick-disconnect by1/4” MNPT Plug5LPA8CConnects the grill regulator to a quickdisconnectcylinder valve.5LPA11CSame as 5LPA8C but it has a check valve.5LP510BKQuick-Disconnect Adaptor for StandardPOL Valves.*Includes 1/4" Male PlugS5LPAFPFPOL x plug nipple filling adaptor for usinga POL filler coupling to fill through a type 2quick disconnect valve.HOSE COUPLINGSHOSE COUPLINGS FORQW HOSEItem # Hose I.D. ConnectionA4QW-A-CPLG 3/16” Female 1/4” O.D. FlareA6QW-A-CPLG 5/16” Female 3/8” O.D. FlareA8QW-A-CPLG 13/32” Female 1/2” O.D. FlareA10QW-A-CPLG 1/2” Female 5/8” O.D. FlareA12QW-A-CPLG 5/8” Female 3/4” O.D. FlareA4412-4-6 5/16” Male 1/4” NPTME8346 5/16” Female 1/4” FPTA6QW-A-90CPL 5/16” Female 3/8” O.D. Flare (90°)A8QW-A-90CPL 13/32” Female 1/2” O.D. Flare (90°)A6QW-A-45CPL 5/16” Female 3/8” O.D. Flare (45°)A8QW-A-45CPL 13/32” Female 1/2” O.D. Flare (45°)BRASS HOSE FERRULESItem # Inside Hose FitsDiameter ID Dayco, GoodallME7325 .562” 1/4”ME7326 .593” 1/4” F02LME7327 .625” 1/4” F02ME7328 .656" 1/4" G02ME7331 .750” 3/8”ME7332* .781” 3/8” F03, G03*Fits Dayco and Goodall bulk hose.FERRULE CRIMPING TOOLSThese tools are used to make low pressure hose assemblies only.MLP3C CRIMPING TOOLTo be used with 3/16”, 1/4”. and 3/8”ID hose ferrules. Strike with hammeror press in vise, then turn 90° andstrike or press again.TL855 CRIMPING TOOL5 Hole crimping tool. 1/4” -3/8” ID.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 135 -

LP Gas Distribution Products6 Elster PerfectionPERFECTION FITTINGSPermasert ® Mechanical CouplingsPermasert ® Mechanical CoupingsSize SDR/Wall Part Number1/2" CTS1/2" IPS3/4" IPS1" CTS1" IPS1-1/4" IPS1-1/2 IPS2" IPS.090"SDR 9.3SDR 11.090/.099/.102"SDR 11SDR 10SDR 11SDR 11P50100P50701P50030P50103P50601P50035P50361P50314Permasert ® ElbowsSize SDR/Wall Part Number1/2" CTS1/2" IPS3/4" IPS1" CTS1" IPS1-1/4" IPS2" IPS.090"SDR 9.3SDR 11.090/.099/.102"SDR 11SDR 10SDR 11P50294P50732P51620P51333P50636P50325P50315Permasert ® Blind End Stubs(Dead-End Fitting - One End Functional)Size SDR/Wall Part Number1/2" CTS3/4" IPS1" CTS1-1/4" IPS2" IPS.090"SDR 11.090/.099/.102"SDR 10P50015P50809P50048P50024SDR 11 P51770Permasert ® Blind End Caps(Stop and Go - Both Ends Functional)Size SDR/Wall Part Number1/2" CTS3/4" IPS1" CTS1-1/4" IPS2" IPS.090"SDR 11.090/.099/.102"SDR 10P50016P50026P50045P50033SDR 11 P50317- 136 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

LP Gas Distribution Products7 Elster PerfectionPERFECTION FITTINGSPermasert ® Repair CouplingsSize SDR/Wall Overall Length Part Number1/2" CTS3/4" IPS1" CTS1" IPS1-1/4" IPS2" IPS.090"SDR 11.090/.099/.102"SDR 11SDR 10SDR 1012"12"12"12"13"15"P50056P50175P50172P50640P50320P50341Permasert ® Three-Way TeesSize SDR/Wall Part Number1/2" CTS1/2" IPS3/4" IPS1" CTS1" IPS1-1/4" IPS2" IPS.090"SDR 9.3SDR 11.090/.099/.102"SDR 11SDR 10SDR 11P50199P50730P50929P50292P50634P50320P50316Permasert ® Three-Way Reducing TeesSize SDR/Wall Size SDR/Wall Size SDR/Wall Part No.1/2" CTS3/4" IPS1" CTS1-1/4" IPS2" IPS2" IPS.090"SDR 11.090/.099/.102"SDR 10SDR 11SDR 111/2" CTS3/4" IPS1" CTS1-1/4" IPS2" IPS2" IPS.090"SDR 11.090/.099/.102"SDR 10SDR 11SDR 111" CTS1/2" CTS1/2" CTS1" CTS1" CTS1-1/4" IPS.090/.099/.102".090.090.090/.099/.102".090/.099/.102"SDR 10P51335P50461P50451P50328P50348P51323Permasert ® Reducing CouplingsSize SDR/Wall Size SDR/Wall Part Number1/2" CTS1/2" CTS1" CTS1" IPS1-1/4" IPS1-1/4" IPS1-1/4" IPS.090".090".090/.099/.102"SDR 11SDR 10SDR 10SDR 101" CTS3/4" IPS1-1/4" IPS3/4" IPS3/4" IPS1" IPS2" IPS.090/.099/.102"SDR 11SDR 10SDR 11SDR 11SDR 11SDR 11P50149P50969P50192P51432P50195P50343P50333CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 137 -

LP Gas Distribution Products10 Elster PerfectionPERFECTION FITTINGSServi-Sert ® FittingsThe Elster Perfection service-head adapter fitting, Servi-Sert, out-performs all conventionalservice heads for both safety and ease of installation. Servi-Sert functions on the sameprinciple as our Permasert couplings, providing a permanent, leak-proof seal. It alsooffers you the security of knowing its pull-out strength is greater than the connectedpolyethylene tubing. Servi-Sert fittings are zinc-plated for extra protection against corrosion.These fittings deliver long term reliability by operating as a single, self-contained unitwith no loose parts to be dropped, lost or misoriented during assembly.• Threaded outlet sizes from 1/2" NPT to 1-1/2" NPT• PE sizes from 1/2" CTS to 1-1/4" IPS (Metric sizes also available)• Available for all plastic pipe wall thicknesses• Servi-Sert top connected risers available with flexible and pre-bent steel casingsLP Gas Distribution ProductsLP Gas Distribution Products8 Elster Perfection8 Elster PerfectionNPT MaleNPT Female(Outlet) PE Size SDR/Wall (Outlet) Part Number1/2"1/2"3/4"3/4"3/4"3/4"3/4"1/2" CTS1/2" CTS1/2" CTS1/2" CTS3/4" CTS3/4" IPS1" CTS.090".062".090".090".090"SDR 11.090"/.099"/.102"3/4"3/4"3/4"1"1-1/4"1-1/4"P71110P71111P71100P71170P71132P711611-1/4" P71121Meets or exceeds requirements of ASTM D-2513 category 1, ANSI B 1.20, ANSI B 31.8, US DOT Part 192,NFPA-58 and CSA B137.4Riser Mounting BracketsAll-Flex Servi-Sert ® RisersTools & AccessoriesAll-Flex Servi-Sert ® Field Assembled Risers With LinersAll-Flex Servi-Sert ® Field Assembled Risers With LinersElster Perfection offers a complete line of toolsand accessories to assist field crews duringthe installation of our gas distribution products.Among these items are chamfering tools andkits, PE cutters/snippers, tools for mechanicaltees, protective sleeves, tubing end protectors,marking pencils, polyethylene clampingdevices, moisture seals and gaskets.Rigid Stub Flex Servi-Sert ® Field Assembled RisersRigid & Stub Flex Servi-Sert ® Field Assembled RisersElster Perfection's brackets are epoxy coated (gray) with cadmium-plated washers,bolts and nuts. All parts are packaged for easy storage and handling.Elster Perfection’s fully approved Servi-Sert All-Flex Nominal riser kits are available in 84" lengthsfor Elster Description the Perfection’s first-stage regulator fully approved Size (tank Servi-Sert side) and All-Flex 36" lengths Building riser for kits Offset the are second-stage available Part in 84" regular Number lengths(house for the first-stage side). Sold regulator in kit form, (tank as required side) and by 36" NFPA-58/1998 lengths for the Edition, second-stage these risers regularWall Brackets 3/4" and 2" IPS Casing 4" P74506 featurepull-out (house side). proof, Sold third-party in kit form, design-certified as required by Servi-Sert NFPA-58/19986" service Edition, heads and these PVC P74500risers sunlight featureresistant, pull-out proof, coated third-party steel flex design-certified that meets crush Servi-Sert strength 9" service requirements. heads and These PVC P74491 risers sunlight arelined resistant, Universal with Mount coated a plastic Bracket steel centering Kit flex 3/4" that - device 2" meets IPS that crush provides strength Adjustable an requirements. annular insulating These air P74440 risers space. areA lined moisture Accessory with Post a seal plastic permanently centering 1-1/4" device affixed x 5' that to the provides end of For an the Post annular riser Mount provides or insulating Remote moisture, air space.P31733corrosion, A moisture and seal shear. permanently affixed to the end of Meter the Hookup riser provides with 74440 moisture,corrosion, Wall Mounting and Hardware shear. (expansion anchors, washer and bolts)P09800With swivel connector/unionWith swivel connector/unionOutlet Inlet SDR/Wall Overall Length Part NumberOutlet Description Inlet SDR/Wall Size Overall Length Part Number1/2" IPS 1/2" CTS .090" 84" P713531/2" Chamfering IPS Tool 1/2" CTS .090" 1/2" CTS x 1" CTS36" 84" P51004P71354 P713533/4"1/2" Chamfering IPS ToolIPS 1/2"1/2"CTSCTS.090".090" 1/2" CTS x 3/4" IPS84"36" P51016P71355P713543/4" Chamfering IPS Tool 1/2" CTS .090" 1" CTS x 3/4" CTS60" 84" P51019P71461 P713553/4" Chamfering IPS Tool 1/2" CTS .090" 1" IPS x 3/4" IPS36" 60" P51008P71356 P714613/4" Chamfering IPS Tool3/4" 1/2" CTS IPS SDR .090" 1-1/4" IPS x 1-1/4" CTS11 84" 36" P51028P71412 P713563/4"Chamfering IPSTool 3/4" IPS SDR 111-1/2" IPS60" 84"P51041P71411 P714123/4"Chamfering IPSTool 3/4" IPS SDR 112" IPS36" 60"P51040P71410 P71411Plastic Cutter Capacity: 1-1/4" CTS P552253/4" IPS 1" 3/4" CTS IPS .090/.099/.102" SDR 11 36" P71511 P71410Plastic Cutter Capacity: 2" IPS P552273/4" IPS 1" CTS .090/.099/.102" 84" 36" P71510 P71511Tool Kit for Mechanical Tee PMTT Installation Tool (5/16" Hex Tee Handle) P556853/4" IPS 1" CTS .090/.099/.102" 84" P71510Pressure Test Cap for Mechanical TeeP55651Rigid (pre-bent) with liners (centering sleeves)CONYERS, GA (800) 241-5652Rigid (pre-bent) with liners (centering sleeves)APOPKA, FL (800) 432-1869Outlet Inlet - 138 - SDR/Wall Vertical Horizontal Part NumberOutlet Inlet SDR/Wall Vertical GOLDSBORO, Horizontal NC Part (800) Number 426-92931/2" IPS3/4" 1/2" IPS3/4" IPS1/2" CTS1/2" CTS3/4" 1/2" CTS IPS.090".090"SDR .090" 1130"30"30"24"24"24"P71350P71453 P71350P71304 P71453

LP Gas Distribution Products9 Elster PerfectionPERFECTION FITTINGSAnodeless Service Line Risers & Transition FittingsElster Perfection anodeless risers and steel-to-polyethylene transition fittings are ideal for gasand oil applications. They provide a connection with a pull-out strength greater than the PEtubing to which it’s connected.• Outlet sizes from 1/2" IPS to 12" IPS• Inlet sizes from 1/2" CTS to 12" IPS• Available with Permasert couplings or fusion connection on polyethylene inlet• Risers available with an additional below grade gas tight seal• Galvanized or epoxy coated casings available• Flexible casings available• Custom configurations available• PELT risers (Perfection Extended Life Technology) resist effects of chemical, atmospheric,ultraviolet and physical attack, and deliver excellent above ground corrosion resistance• Flanged, threaded, and weld style transition fittings and risers availableAnodeless Service Line Risers - Permasert ® Mechanical EndsOutlet Inlet SDR/Wall Vertical Horizontal Part Number1/2" IPS 1/2" CTS .090" 18" 18" P772053/4" IPS 1/2" CTS .090" 30" 24" P77181*3/4" IPS 1/2" CTS .090" 18" 18" P771953/4" IPS 1/2" CTS .090" 22" 18" P772013/4" IPS 3/4" IPS SDR 11 30" 26" P79354*3/4" IPS 1" CTS .090/.099/.102" 30" 26" P77120*1" IPS 1" IPS SDR 11 30" 26" P79350*1-1/4" IPS 1-1/4" IPS SDR 10 30" 24" P75901*1-1/2" IPS 1-1/2"IPS SDR 11 32" 29" P79784*2" IPS 2" IPS SDR 11 30" 15" P75906**IAPMO/UPC ListedAnodeless Service Line Risers - Fusion EndsOutlet Inlet SDR/Wall Vertical Horizontal Part Number3/4" IPS 1/2" CTS .090" 30" 24" P751693/4" IPS 1/2" CTS .090" 18" 18" P756783/4" IPS 1/2" CTS .090" 22" 18" P772023/4" IPS 3/4" IPS SDR 11 30" 26" P793533/4" IPS 1" CTS .099" 30" 26" P77121*1" IPS 1" IPS SDR 11 30" 31-1/2" P757511-1/4" IPS 1-1/4" IPS SDR 10 30" 24" P759002" IPS 2" IPS SDR 11 30" 12-1/4" P79811*IAPMO/UPC ListedTransition FittingsDescription Size SDR/Wall Material Part NumberThreaded 3/4" IPS x 1/2" CTS x .090" 2406 P700205Welded 3/4" IPS x 1/2" CTS x .090" 2406 P700310Threaded 3/4" IPS x 3/4" IPS x SDR 11 2406 P700802Threaded 1" IPS x 1" CTS x .099" 2406 P701407Threaded 1-1/4" IPS x 1-1/4" IPS x SDR 10 2406 P702204Threaded 1-1/4" IPS x 1-1/4" IPS x SDR 11 2406 P702205Threaded 2" IPS x 2" IPS x SDR 11 2406 P702602Meets or exceed the requirements of ASTM D-2513 category 1, ANSI B 1.20, ANSI B 31.8, US DOT Part 192, NFPA-58and CSA B137.4CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 139 -

PERFECTION ACCESSORIESServi-Sert ® FittingsRiser Mounting BracketsTools & Accessories 3/4"Elster Perfection offers a complete line of toolsand accessories to assist field crews duringthe installation of our gas distribution products.Among these items are chamfering tools andkits, PE cutters/snippers, tools for mechanicaltees, protective sleeves, tubing end protectors,marking pencils, polyethylene clampingdevices, moisture seals and gaskets.Riser Mounting BracketsTools & Accessories1/2"3/4"3/4"3/4"3/4"3/4"1/2" CTS1/2" CTS1/2" CTS3/4" CTS3/4" IPS1" CTS.062".090".090".090"SDR 11.090"/.099"/.102"3/4"3/4"1"1-1/4"1-1/4"1-1/4"P71111P71100P71170P71132P71161P71121Meets or exceeds requirements of ASTM D-2513 category 1, ANSI B 1.20, ANSI B 31.8, US DOT Part 192,NFPA-58 The Elster and Perfection CSA B137.4 service-head adapter fitting, Servi-Sert, out-performs all conventionalservice heads for both safety and ease of installation. Servi-Sert functions on the sameprinciple as our Permasert couplings, providing a permanent, leak-proof seal. It alsooffers you the security of knowing its pull-out strength is greater than the connectedpolyethylene tubing. Servi-Sert fittings are zinc-plated for extra protection against corrosion.These fittings deliver long term reliability by operating as a single, self-contained unitwithElsternoPerfection'sloose partsbracketsto be dropped,are epoxylostcoatedor misoriented(gray) withduringcadmium-platedassembly.washers,bolts and nuts. All parts are packaged for easy storage and handling.• Threaded outlet sizes from 1/2" NPT to 1-1/2" NPT• PE sizes from 1/2" CTS to 1-1/4" IPS (Metric sizes Nominal also available)Description • Available for all plastic Size pipe wall thicknesses Building Offset Part Number• Wall Servi-Sert Brackets top connected 3/4" risers and 2" available IPS Casing with flexible 4" and pre-bent steel P74506 casingsNPT Male6" P745009" NPT Female P74491(Outlet) Universal Mount Bracket Kit PE Size 3/4" - 2" IPS SDR/Wall Adjustable (Outlet) Part P74440 Number1/2" Accessory Post 1/2" CTS 1-1/4" x 5' .090" For Post Mount 3/4" or Remote P711101/2"1/2" CTS.062" Meter Hookup 3/4" with 744403/4" Wall Mounting Hardware (expansion 1/2" CTS anchors, washer .090" and bolts) 3/4"3/4"1/2" CTS.090"1"3/4"3/4" CTS.090"1-1/4"3/4"3/4" IPSSDR 111-1/4"1" CTS.090"/.099"/.102"P31733P71111P71100 P09800P71170P71132P711611-1/4" P71121Meets or exceeds requirements of ASTM D-2513 category 1, ANSI B 1.20, ANSI B 31.8, US DOT Part 192,NFPA-58 and CSA B137.4Description Size Part NumberChamfering Tool 1/2" CTS x 1" CTS P51004Chamfering Tool 1/2" CTS x 3/4" IPS P51016Chamfering Tool 1" CTS x 3/4" CTS P51019Chamfering Tool 1" IPS x 3/4" IPS P51008Chamfering Tool 1-1/4" IPS x 1-1/4" CTS P51028Elster Perfection's brackets are epoxy coated (gray) with cadmium-plated washers,Chamfering Tool 1-1/2" IPS P51041bolts and nuts. All parts are packaged for easy storage and handling.Chamfering Tool 2" IPS P51040Plastic Cutter Capacity: 1-1/4" Nominal CTS P55225Plastic Cutter Capacity: 2" IPS P55227Description Size Building Offset Part NumberTool Kit for Mechanical Tee PMTT Installation Tool (5/16" Hex Tee Handle) P55685Wall Brackets 3/4" and 2" IPS Casing 4" P74506Pressure Test Cap for Mechanical TeeP556516" P745009" P74491Universal Mount Bracket Kit 3/4" - 2" IPS Adjustable P74440Wall Mounting Hardware (expansion anchors, washer and bolts)Accessory Post 1-1/4" x 5' For Post Mount or RemoteMeter Hookup with 74440P31733P09800Elster Perfection offers a complete line of toolsand accessories to assist field crews duringthe installation of our gas distribution products.Among these items are chamfering tools andkits, PE cutters/snippers, tools for mechanicaltees, protective sleeves, tubing end protectors,marking pencils, polyethylene clampingdevices, moisture seals and gaskets.Description Size Part NumberChamfering Tool 1/2" CTS x 1" CTS P51004Chamfering Tool 1/2" CTS x 3/4" IPS P51016Chamfering Tool 1" CTS x 3/4" CTS P51019Chamfering Tool 1" IPS x 3/4" IPS P51008Chamfering Tool 1-1/4" IPS x 1-1/4" CTS P51028Chamfering Tool 1-1/2" IPS P51041Chamfering Tool 2" IPS P51040Plastic Cutter Capacity: 1-1/4" CTS P55225Plastic Cutter Capacity: 2" IPS P55227Tool Kit for Mechanical Tee PMTT Installation Tool (5/16" Hex Tee Handle) P55685Pressure Test Cap for Mechanical TeeP55651- 140 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

LP Gas Distribution Products11 Elster PerfectionPERFECTION FITTINGSCoppersert Copper-to-PE Transition CouplingsThese reliable couplings combine a brass 45° flare fitting for copper tubing with a Permasertcoupling for polyethylene (PE) piping. These transition couplings are fast and easy to installand place minimal stress on PE piping.• Copper sizes range from 1/4" to 5/8" O.D. and PE sizes range from 1/2" CTS to 1" IPS• Configurations available include couplings, tees, ells, and reducing couplings• Molded from industry proven polyethylene. Pull-out strength is greater than theconnecting PE piping itself• Fittings should be protected against corrosion as warranted by soil conditionsin accordance with NFPA-58 and CFR 49 Part 192 as requiredSize SDR/Wall Copper Size Part Number1/2" CTS .090" 1/4" O.D. P411201/2" CTS .090" 3/8" O.D. P410071/2" CTS .090" 1/2" O.D. P410131/2" CTS .090" 5/8" O.D. P410023/4" IPS SDR 11 5/8" O.D. P411301" CTS .090/.099/.102" 5/8" O.D. P41150Laboratory tested for regulatory compliance and meet or exceed the requirements of ASTM D-2513 category 1,US DOT part 192 and NFPA-58.PermaLock ® Mechanical Tapping TeesOur full-encirclement mechanical tapping tee is the safe, reliable and economicalway to join a polyethylene service line to a polyethylene gas main.• Permasert or fusion outlet sizes from 1/2" CTS to 2" IPS (20mm to 63mm)• Can be installed in less than five minutes using only a 5/16" hex bit.No need to shut down the main• Ratchet-style cutter sleeve threads into gas main to lock and seal the tapping tee to themain. Minimal protrusion of cutter sleeve into the main facilitates pigging of gas line• Molded from PE4710/Bimodal PE3408 materials that meet or exceed requirementsof ASTM D-2513 and ISO 4437• Saddle fusion and electrofusion tapping tees with Permasert coupling outlets available• Large 0.8" cutter/port size on 2” through 8” teesSize Permasert Outlet SDR/Wall Cutter Size Part Number1-1/4" IPS 1/2" CTS .090" .55" P542011-1/4" IPS 1" CTS .090/.099/.102" .55" P542512" IPS 1/2" CTS .090" .80" P557022" IPS 3/4" IPS SDR 11 .80" P559012" IPS 1" CTS .090/.099/.102" .80" P558022" IPS 1" IPS SDR 11 .80" P559512" IPS 1-1/4" IPS SDR 9.3/10 .80" P559822" IPS 2" IPS SDR 11 .80" P559904" IPS 1/2" CTS .090" .80" P557164" IPS 3/4" IPS SDR 11 .80" P559024" IPS 1" CTS .090/.099/.102" .80" P558114" IPS 1" IPS SDR 11 .80" P559534" IPS 1-1/4" IPS SDR 9.3/10 .80" P559864" IPS 2" IPS SDR 11 .80" P55992CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 141 -

LP Gas Distribution Products12 Elster PerfectionPERFECTION FITTINGSPSV Polyethylene Shut-Off ValvesThe Elster Perfection PSV polyethylene shut-off valve replaces non-PE and metallic valvesto provide economical compatibility with all PE gas distribution systems. These PSV ®valves eliminate the need for corrosion inhibiting coatings, cathodic protection, federallymandated corrosion inspection and record-keeping.• Sizes from 1/2" to 8"• 1/2" to 1-1/4" sizes are available with quarter turn (90°) or full turn (360°) actuators• Temperatures from -20°F to 100°F• Available with Permasert outlets from 1/2" CTS through 2" IPS• Fusion outlets available from 1/2" CTS through 8" IPSSize SDR/Wall Part Number1/2" CTS .090" P450513/4" IPS SDR 11 P451001" CTS .090/.099/.102" P450711" IPS SDR 11 P452001-1/4" IPS SDR 9.3/10 P451702" IPS (MBV)* SDR 11 P46011* Modified ball valve.Meets or exceeds requirements of ASTM D-2513, US DOT Part 192, ANSI B16.40 and CSA B137.4Note: PSV also available with butt and socket-fusion outlet ends.Permasert ® XL Large DiameterMechanical CouplingsElster Perfection’s large diameter mechanical couplings provide the non-corrosive benefitsof plastic combined with the fast, easy installation features of mechanical couplingsfor joining LP ditribution piping.• Plastic construction with 304 series stainless hardware• Fast and easy installation, requires only one person• Total installed cost savings compared to alternate methods• No special tools or equipment required• All weather installationSize SDR/Wall Part Number2" IPS SDR 11 P55161SDR 9/9.3P551623" IPS SDR 11/11.5 P55131SDR 9.3P55132SDR 13.5P551334" IPS SDR 11/11.5 P55101SDR 9.3P55102SDR 13.5P551036" IPS SDR 11 P55183SDR 11.5P55182SDR 13.5P551818" IPS SDR 11 P55196SDR 13.5 P55198- 142 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

PERFECTION FITTINGSPolyethylene pipe & tubing(PE2406/Yellow) line sizing chartfor LP gas vaporLine sizing for LP gas vapor between 1st and 2nd stage regulators allowing a pressure drop of 1 psi at 10 psi setting.EFV excessflow valvesThe Elster Perfection EFV, preventscatastrophic gas leakage by automaticallyshutting off gas flow when flow exceedsa predetermined rate. Elster Perfectionexcess flow valves are incorporated intoour gas distribution products for easyinstallation in your distribution system.• Available in Permasert couplings, fusionand mechanical tapping tees.• Available in fusion outlet sticks, steelpipe nipples, and incorporated into ourPSV valves• Self-actuating valve with automatic reset• Comply with the requirements of MSSSP-115 and US DOT CFR Title 49,Part 192.381Prefabricated metersets & steel productsElster Perfection meter loops, bends,swivels and meter manifold/headers cansimplify your meter set installations. Ourprecision fabricated products are idealfor both single dwelling and multiplefamily/commercial applications. The ElsterPerfection prefabricated meter setssimplify installation, reduce the numberof threaded joints (potential leak points)and improve the appearance of yourfinished installation.• Custom configurations andassemblies available• All welds meet the requirementsof US DOT CFR 49, Part 192 andASME Section IXTubing 1/2" CTS 1/2" IPS 3/4" IPSLength (ft) * SDR 7 (.090") SDR 9.3 (.090") SDR 11 (.095")Maximum LP Gas Vapor Capacity (thousands of BTU/hr)10 1406 4235 894020 944 2843 600130 747 2252 475340 634 1908 402950 557 1679 354460 502 1512 319170 459 1383 292080 425 1281 270490 397 1197 2527100 374 1127 2379125 329 991 2092150 296 893 1884175 271 817 1724200 251 756 1597225 235 707 1492250 221 665 1405275 209 630 1330300 199 599 1265350 182 548 1157400 169 508 1072Tubing 1" CTS 1" IPS 1-1/4" IPS 2" IPSLength (ft) * SDR 11.5 (.099") SDR 11 (.119") SDR 10 (.166") SDR 11 (.216")Maximum LP Gas Vapor Capacity (thousands of BTU/hr)10 10803 16486 28912 8248820 7252 11067 19409 5537330 5744 8766 15372 4385840 4868 7429 13029 3717150 4282 6535 11460 3269560 3856 5884 10319 2944170 3529 5385 9444 2694480 3268 4987 8746 2495390 3054 4661 8173 23319100 2874 4387 7693 21948125 2528 3858 6766 19305150 2277 3474 6093 17384175 2084 3180 5576 15909200 1930 2945 5164 14733225 1803 2752 4826 13768250 1697 2590 4542 12959275 1607 2452 4300 12268300 1528 2332 4090 11669350 1399 2134 3743 10680400 1295 1976 3467 9890* Total length of piping from outlet of first stage regulator to inlet of farthest second stage regulator.Note: Polyethylene pipe/tubing shall be limited to vapor service, not exceeding 30 psig, and must be installedoutdoors and underground.The above numbers were calculated by using the Mueller formula for high pressure installations of smooth pipe suchas plastic, copper, brass, etc. carrying gas at pressures greater than 1 psig.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 143 -

POLY PIPE & FITTINGSPLASTIC PIPINGPOLY PIPEPE2406 GAS PIPE• For vapor service not exceeding30 psig• For underground installation with aminimum of 18” cover, or 12” cover ifexternal damage to the pipe is notlikely• Available in copper tube size (CTS) oriron pipe size (IPS)Item # Pipe Size Coil LengthPP-1/2CTS* 1/2" CTS 500’PP-1"CTS 1" CTS 500’PP-3/4IPS 3/4" IPS 500’PP-1"IPS 1" IPS 500’PP-11/4IPS-150 1 1/4" IPS 150'PP-11/4-500 1 1/4" IPS 500’PP-2"IPS-150 2" IPS 150'PP-2"IPS-500 2" IPS 500’* Can be shipped via UPSSOCKET FUSION FITTINGSMARKING FLAGP450WMarking Flag with 30” WireTRACER WIRE1430Y-HS-500500’ # 14 Yellow Tracer WireInstall in trench with plastic pipe to allowlocation of pipe by metal detector.DETECTATAPE METALLIC TAPEInstall in trench after partially burying pipe.Allows location of pipe with metal detectorand protects pipe when digging becausethe tape will be exposed before the pipeis damaged.Item # Length Width701111 1000’ 2”NON-DETECTABLE TAPE22-2113” x 1000’ yellow tapeSOCKET FUSION FITTINGS (CONTINUED)ELBOWSItem #SizeSE-041/2” CTSSE-063/4” IPSSE-081” IPSSE-101 1/4” IPSSE-162” IPSTEESItem #SizeST-041/2” CTSST-063/4” IPSST-081” IPSST-101 1/4” IPSST-162” IPSEND CAPSItem #SizeSCAP-041/2” CTSSCAP-063/4” IPSSCAP-081” IPSSCAP-101 1/4” IPSSCAP-162” IPSREDUCER COUPLINGSItem #SizeSRC-06/04 3/4” IPS X 1/2” CTSSRC-08/04 1” IPS X 1/2” CTSSRC-08/06 1” IPS X 3/4” IPSSRC-10/06 1 1/4” IPS X 3/4” IPSSRC-10/08 1 1/4” IPS X 1” IPSSRC-16/08 2” IPS X 1” IPSSRC-16/10 2” IPS X 1 1/4” IPSCOUPLINGSItem #SC-04SC-06SC-08SC-10SC-16Size1/2” CTS3/4” IPS1” IPS1 1/4” IPS2” IPSTAPPING TEESItem #SizeSTT-10/04 1 1/4” IPS X 1/2” CTSSTT-10/06 1 1/4” IPS X 3/4” IPS- 144 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

FUSION TOOLSFUSION ACCESSORIES/TOOLSCOLD RINGSFUSION ACCESSORIES/TOOLS (CONTINUED)TAPPING TEE FACESItem #550CR0620000550CR0500000550CR0750000550CR0110000550CR0010000550CR0120000550CR0150000550CR0020000550CR0030000550CR0040000Size (Imperial)1/2”CTS1/2” IPS3/4” IPS1” CTS1” IPS1 1/4” IPS1 1/2” IPS2” IPS3” IPS4” IPSItem #556EB2000091556EB2000092556EB2000093556EB2000094556EB2000095556EB2000096556EB2000097FUSION TOOLSSize (Imperial)1 1/4” IPS1 1/2” IPS2” IPS3” IPS4” IPS6” IPS8” IPSHEATER MUFFDEPTH GAUGESItem #Size (Imperial)5550005 1/2” CTS555DG1500000 1/2” IPS555DG1750000 3/4” IPS5550004 1” CTS555DG1010000 1” IPS555DG1120000 1 1/4” IPS555DG1150000 1 1/2” IPS555DG1020000 2” IPS555DG2030400 3” & 4” CombinationFITTING HOLDERSItem #Description5560021 Model 2 ElectricHeating Tool5560022 Model 4 SWElectric Heating Tool5560023 Model 4 GasFired Heating Tool5560024 2” Gas Fired HotHead Tool5560025* Extension Handle556HM3000102 Heater Muff900MM0120025 Nozzle Regulator* For Model 2 and Model 4 SW ToolsBUTT FUSION FACESItem #Description556EB2000051 Model 2 Butt FusionPlates556EB3400014 Model 4 Butt FusionPlates5560005 Model 2 ButtSupport SetItem #550FH0020000550FH0030000550FH0040000Size (Imperial)2” IPS3” IPS4” IPSCHAMFER TOOLSBRANCH SADDLE FACESItem # Size (Imperial)556EB2000098 2” X 2” IPS556EB2000099 3” X 2” IPS556EB2000100 4” X 2” IPS556EB2000101 6” X 2” IPS556EB2000102 8” X 2” IPSItem #550CT0120000550CT0150000550CT0020000550CT0030000550CT0040000Size (Imperial)1 1/4” IPS1 1/2” IPS2” IPS3” IPS4” IPSCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 145 -

FUSION ACCESSORIES / TRACPIPEFUSION ACCESSORIES/TOOLS (CONTINUED)SOCKET FUSION FACESItem #555SP2620000555SP2500000555SP2750000555SP2110000555SP2010000555SP2120000555SP2150000555SP2020000555SP2030000555SP2040000SQUEEZE-OFF TOOLSTRACPIPE FLEXIBLE GAS PIPING SYSTEMCORRUGATED STAINLESS STEEL TUBINGSize (Imperial)1/2” CTS1/2” IPS3/4” IPS1” CTS1” IPS1 1/4” IPS1 1/2” IPS2” IPS3” IPS4” IPSItem #Description5570006 1/2” CTS - 2” - ServiceSqueeze-Off Tool550ST0020620 2”- 6”Squeeze-Off ToolWe now stock the new and improved CounterStrike by TracPipe.Not Bonded? This product incorporates technology where undersome installations, equipotential bonding is not required.CounterStrike piping utilizes the same fittings as conventionalTracPipe.COUNTERSTRIKESize Pkg. Qty. (Reel)CS-375-100 3/8" 100'CS-375-250 3/8" 250'CS-500-50 1/2" 50'CS-500-250 1/2" 250'CS-750-50 3/4" 50'CS-750-250 3/4" 250'CS-100-50 1" 50'CS-100-100 1" 250'CS-100-180 1" 250'CS-125-250 1 1/4" 180'CS-150-250 1 1/2" 100'FGP-Stand 3/8" 1'Cost effective and reliable. TracPipe is the ideal gas piping systemfor new construction, rehab, and retrofit projects. Rated at 5psigmaximum working pressure.TRACPIPE FLEXIBLE GAS PIPING SYSTEM (CONT)FGP-GC-1 3/8",m 1/2", 3/4" (TP) 1/2", 3/4", 1" (Iron Pipe)FGP-GC-2 1", 1 1//4" (TP) 1 1/4", 1 1/2", 2" (Iron Pipe)FGP-GC-3 1 1/2", 2" (TP) 2 1/2" - 4" (Iron Pipe)AUTOFLARE STRAIGHTMECHANICAL FITTINGBrass AutoFlare insertItem # Tubing Size Pipe Size Box Qty. Spare Split RingsFST-375N 3/8” 3/8” MPT 24 RING-375FST-375 3/8” 1/2” MPT 24 RING-375FSTF-375 3/8” 1/2” FPT 24 RING-375FST-500 1/2” 1/2” MPT 24 RING-500FSTF-500 1/2” 1/2” FPT 24 RING-500RST-500-750 1/2” 3/4” MPT 24 RING-500FST-750 3/4” 3/4” MPT 16 RING-750FSTF-750 3/4” 3/4” FPT 16 RING-750RST-750-500 3/4” 1/2” MPT 16 RING-750FST-1000 1” 1” MPT 16 RING-1000FSTF-1000 1” 1” FPT 16 RING-1000RST-1000-750 1” 3/4” MPT 16 RING-1000FST-1250 1 1/4” 1 1/4” MPT 6 RING-1250FST-1500 1 1/2” 1 1/2” MPT 4 RING-1500FST-2000 2” 2” MPT 4 RING-2000COUPLINGSItem # Size Pkg. Qty.CPLG-375 3/8” eachCPLG-500 1/2” eachCPLG-750 3/4” eachCPLG-1000 1” eachCPLG-1250 1 1/4” 6/boxCPLG-1500 1 1/2” 4/boxCPLG-2000 2” 4/boxUnder some installation instances, equipotential bonding of CounterStrikeis not required.CounterStrike is sized exactly the same as conventional TracPip and uses thesame AutoFlare fittings.- 146 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

TRACPIPE FITTINGS & ACCESSORIESTRACPIPE FLEXIBLE GAS PIPING SYSTEM (CONT)MULTI-PORT MANIFOLDSItem # Inlets Outlets CoatedMI-PC 1/2” & 3/4” Four 1/2” YesMI-PC-1X 1” & 1 1/4” Four 3/4” YesMI-PC-2X 1 1/2” & 2” Four 1” YesOARA PRESSUREREGULATORS FOR 2 PSI SYSTEMSThe 1/2” & 3/4” regulators include anapproved vent limiter for indoor installations.The 1 1/4” needs to be vented to the outside.Must be mounted in a horizontal position.Item # Size BTU Capacity44-4-190-0004** 1/2” 500,00044-4-290-0003** 3/4” 960,000M325-7-1 1/4 1 1/4” 900,000*Capacity decreases for single appliance load**Must be mounted in a horizontal positionTUBE CUTTERItem # For Tubing SizeTC-15 3/8” - 1”TC-152 1 1/4” - 2”E-5272 Replacement Cutter Wheel*Stainless steel cutting wheel is not required for TracPipeFLANGE MOUNT FITTINGSPoly-coated malleable iron flangeswith AutoFlare straight or 90° elbowbrass fittings.TRACPIPE FLEXIBLE GAS PIPING SYSTEM (CONT)FGP-TERMBRACFlanged L BracketTERMINATION MOUNT FITTINGSIncludes brass Auto Flare fitting ® for easierattachment for stud or floor mounting.Eliminates L-Bracket.Item# Description Size Pkg. Qty.TM-375 Termination Mount 3/8” 12/boxTM-500 Termination Mount 1/2” 12/boxTM-750 Termination Mount 3/4” 8/boxTM-1000 Termination Mount 1” 8/box90TM-375 90° Termination Mount 3/8” 8/box90TM-500 90° Termination Mount 1/2” 8/boxMT6-500 6” Meter Termination 1/2” 1 eachMT6-750 6” Meter Termination 3/4” 1 eachMT6-1000 6” Meter Termination 1” 1 eachMT12-500 12” Meter Termination 1/2” 1 eachMT12-750 12” Meter Termination 3/4” 1 eachMT12-1000 12” Meter Termination 1” 1 eachTM90V-375 90° Flange Valve 3/8" 3/8" 12/boxTM90V-500 90° Flange Valve 1/2" 1/2" 12/boxTM90V-750 90° Flange Valve 3/4" 3/4" 12/boxBRACKETS AND STUB-OUTSINSTALLATION HANGERBRACKETSItem # For TracPipe SizeA552-L 3/8”A553-L 1/2”A554-L 3/4”TracPipe clips w/SS Screws556-2HSDR 1/2"556-3HSDR 3/4"Item # Size Fitting Flange Pkg. Qty.BFF-375 3/8” straight iron 12ELLB-375 3/8” elbow iron eachBFF-500 1/2” straight iron 12ELLB-500 1/2” elbow iron eachBFF-750 3/4” straight iron 8BFF-1000 1” straight iron 8BFF-1250 1 1/4” straight iron 4BF90V-375 90° Flange Valve 3/8" 3/8" 6/boxBF90V-500 90° Flange Valve 1/2" 1/2" 6/boxBF90V-750 90° Flange Valve 3/4" 3/4" 6/boxItem # Description Size Pkg. Qty.FGP-KVB-375 Key Valve Bracket 3/8” 18/BOXFGP-KVB-500 Key Valve Bracket 1/2” 18/BOXFGP-1X6 MT 1”x6” Meter Term Stub-out 1” x 6” 20/BOXFGP-1X12 MT 1”x12” Meter Term Stub-out 1” x 12” 20/BOXFGP-STUD-BRAC Meter Stub Bracket all 8/BOXFGP-ASP-500 Appliance Stub-out 1/2” x 2-1/2” 25/BOXFGP-FPT-500 Fireplace Stub-out 1/2”x 6” 25/BOXCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 147 -

TRACPIPE FITTINGS & ACCESSORIESAATRACPIPE FLEXIBLE GAS PIPING SYSTEM (CONT)ATEE FITTINGSTracPipe X Pipe Outlet. Sizes A, B, CItem # Pipe Size Tubing Size Pkg. Qty.T500-500 1/2” FNPT 1/2” 14/boxT500-750 3/4” MNPT 1/2” 12/boxT750-750 3/4” FNPT 3/4” 12/boxT1000-1000 1” FNPT 1” 10/boxT750-500 1/2” FNPT 3/4” 12/boxCCTEE FITTINGSBTracPipe X TracPipe Outlet. Sizes A, B, CItem # AxBxC Pkg. Qty.TF500-T500 1/2” x 1/2" x 1/2” 14/boxTF750-T500 3/4" x 3/4” x 1/2" 12/boxTF750-T750 3/4” x 3/4” x 3/4" 12/boxTF1000-T500 1” x 1" x 1/2” 10/boxTF1000-T750 1” x 1" x 3/4” 10/boxTF1000-T1000 1” x 1" x 1" 10/boxItem # AxBxC Pkg. Qty.FGP-TF1250-T1000 1 1/4" x 1 1/4" x 1" 1 eachFGP-TF1250-T750 1 1/4" x 1 1/4" x 3/4" 1 eachFGP-TF1250-T500 1 1/4" x 1 1/4" x 1/2" 1 eachFGP-TF1500-T1250 1 1/2" x 1 1/2" x 1 1/4" 1 eachFGP-TF1500-T1000 1 1/2" x 1 1/2" x 1" 1 eachFGP-TF1500-T750 1 1/2" x 1 1/2" x 3/4" 1 eachFGP-TF1500-T500 1 1/2" x 1 1/2" x 1/2" 1 eachFGP-TF2000-T1500 2" x 2" x 1 1/2" 1 eachFGP-TF2000-T1250 2" x 2" x 1 1/4" 1 eachFGP-TF2000-T1000 2" x 2" x 1" 1 eachFGP-TF2000-T750 2" x 2" x 3/4" 1 eachFGP-TF2000-T500 2" x 2" x 1/2" 1 eachCBBREDUCER TEESSizes A, B, CItem # Size Run x Run x Branch Pkg. Qty.FGP-RT-501 1/2” x 3/8” x 3/8” 14/boxFGP-RT-751 3/4” x 1/2” x 3/8” 12/boxFGP-RT-752 3/4” x 1/2” x 1/2” 12/boxFGP-RT-1001 1” x 3/4” x 1/2” 10/boxFGP-RT-1002 1” x 3/4” x 3/4” 10/boxItem # A, B, C Pkg. Qty.FGP-RT-1251 1 1/4" x 1" x 1" 1 eachFGP-RT-1252 1 1/4" x 1" x 3/4" 1 eachFGP-RT-1253 1 1/4" x 1" x 1/2" 1 eachFGP-RT-1501 1 1/2" x 1 1/4" x 1 1/4" 1 eachFGP-RT-1502 1 1/2" x 1 1/4" x 1" 1 eachFGP-RT-1503 1 1/2" x 1 1/4" x 3/4" 1 eachFGP-RT-1504 1 1/4" x 1 1/4" x 1/2" 1 eachFGP-RT-2001 2" x 1 1/2" x 1 1/2" 1 eachFGP-RT-2002 2" x 1 1/2" x 1 1/4" 1 eachFGP-RT-2003 2" x 1 1/2" x 1" 1 eachFGP-RT-2004 2" x 1 1/2" x 3/4" 1 eachFGP-RT-2005 2" x 1 1/2" x 1/2" 1 eachTRACPIPE FLEXIBLE GAS PIPING SYSTEM (CONT)FLOPPY STRIP WOUNDCONDUITType RW galvanized steel.Item # For tubing size Size Pkg. Qty. (Coil)FPY-375 3/8” 3/4” 50’FPY-500 1/2” 1” 50’FPY-750 3/4” 1 1/4” 25’FPY-1000 1” 1 1/2” 25’FPY-1250 1 1/4” 2” 25’FPY-1500 1 1/2” 2 1/2” 25’FPY-2000 2” 3” 25’STRIKER PLATESCarbon steel hardenedplates.Item # Plate Size Pkg. Qty.SP-100 Full 3” x 12” eachSP-050 Half 3” x 7” eachSP-025 Quarter 3” x 7” eachSP-617 Full flat 6 1/2” x 17” eachSP-075 Three-Quarter 3" x 9" 100/boxFGP-MB2Manifold bracketFGP-LCLoad center w/ bracket- 148 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

TRACPIPE FITTINGS & ACCESSORIESTRACPIPE FLEXIBLE GAS PIPING SYSTEM (CONT)FGP-ITAG-50INSTALLATION TAGTRACPIPE ® PS-IIUNDERGROUND GAS PIPINGPATENTEDNow available! TracPipe PS-II is a pre-sleeved gas installation systemfor underground, rooftop, or exterior wall applications that is morecost-effective and easier to install vs. our original TracPipe PS system.UNDERGROUND TUBINGReelItem # Size LengthFGP-UGP-375-250 3/8” 250 ft./reelFGP-UGP-500-250 1/2” 250 ft./reelFGP-UGP-500-100 1/2" 100 ft./reelFGP-UGP-750-250 3/4” 250 ft./reelFGP-UGP-750-100 3/4" 100 ft./reelFGP-UGP-100-250 1” 250 ft./reelFGP-UGP-100-100 1" 100 ft./reelFGP-UGP-125-150 1 1/4” 150 ft./reelFGP-UGP-150-150 1 1/2” 150 ft./reelFGP-UGP-200-150 2” 150 ft./reelUNDERGROUNDMALE ADAPTERSPkg.Item # Size Qty.FGP-UGP-375 3/8” NPT Male 25/boxFGP-UGP-500 1/2” NPT Male 20/boxFGP-UGP-750 3/4” NPT Male 16/boxFGP-UGP-1000 1” NPT Male 9/boxFGP-UGP-1250 1 1/4” NPT Male 9/boxFGP-UGP-1500 1 1/2” NPT Male 9/boxFGP-UGP-2000 2” NPT Male 5/boxTRACPIPE FLEXIBLE GAS PIPING SYSTEM (CONT)SILICONE OUTDOOR TAPEPart #915-10H-12915-10H-12BLWALL BOXWBT-500Built in 90° Valve 1/2” NPTDescription1” x 12 yard, Yellow1" x 12 yard, BlackUNDERGROUNDCOUPLINGSPkg.Item # Size Qty.FGP-UGC-375 3/8” T/P Coupling 25/boxFGP-UGC-500 1/2” T/P Coupling 20/boxFGP-UGC-750 3/4” T/P Coupling 16/boxFGP-UGC-1000 1” T/P Coupling 9/boxFGP-UGC-1250 1 1/4” T/P Coupling 9/boxFGP-UGC-1500 1 1/2” T/P Coupling 8/boxFGP-UGC-2000 2” T/P Coupling 5/boxGAS BREAKER EXCESS FLOW SAFETY VALVESAutoTripNominalExcess Flow Typical Max Appliance Inlet OutletValves Load Load Connector Thread ThreadDescription Part Number (SCFH) (BTU/Hour) Size Connections ConnectionsApplicance AFD-80 75 80,000 1/4" 1/2" M-NPT 3/8" FlareValve3/8" F-NPTAppliance AFD-100A 100 100,000 3/8" 1/2" M-NPT 1/2" FlareValve3/8" F-NPTAppliance AFD-130A 125 130,000 1/2" 3/4" M-NPT 5/8" FlareValve3/8" F-NPTAppliance AFD-130B 130 130,000 1/2" 3/4" M-NPT 5/8" FlareValve1/2" F-NPTMeter/ LFD-125 120 125,000 n/a 3/4" M-NPT 3/4" M-NPTLine Valve 1/2" F-NPT 1/2" F-NPTMeter/ LFD-275A 125 275,000 n/a 3/4" M-NPT 3/4" M-NPTLine Valve 1/2" F-NPT 1/2" F-NPTMeter/ LFD-375A 180 375,000 n/a 1" M-NPT 1" M-NPTLine Valve 3/4" F-NPT 3/4" F-NPTCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 149 -

GAUGES AND PRESSURE TEST EQUIPMENTPRESSURE GAUGESTo determine the correct gauge, environment along with normaloperating system pressure must be considered. The pressure range of thegauge should be twice the normal system pressure to maximize gauge lifeand accuracy.MEJ502Bottom MountBack MountPressure Range Bottom Inlet Back Inlet0-5 # J499 ——0-15 # J500 J5100-30 # J501 J5110-60 # J502 J5120-100 # J503 J5130-200 # J504 Part No. ——0-300 # J506 MEJ2.5GB J5160-400 # **J542 ——* For LPG or NH3 Service** Glycerine filledHIGH PRESSUREGAUGES2” Dial, 1/4” NPT Bottom or Back InletMEJ542BRASS CASE HIGH PRESSUREGAUGES2” Dial, 1/4” NPT Bottom InletItem # Pressure RangeB115-30 0-30 #B115-60 0-60 #B115-100 0-100 #B115-300 0-300 #LIQUID FILLED GAUGESLiquid filled gauges dampen pulsation and vibration under severeoperating conditions such as compressors, pumps, etc.Part No.1/4” MNPTBottom Mount1/4” MNPTBack MountMEJ503 MEJ513 0-100 2” DryPRESSURE GAUGES (CONTINUED)MEJ513DA432CARRYING CASEGA P500Pressure Gauge Protective BootDesigned to fit over the pressure gauge dial to extend thelife and accuracy of dry and liquid pressure gauges. Thisboot helps protect the dry pressure gauge’s fragile internalcomponents and helps prevent dents on liquid pressure gaugeswhich cause the gauge to leak.Fits2-1/2” Dial, Bottom Mount Pressure GaugePSIGDialSizeFill TypeMEJ520 — 0-5 2-1/2” DryMEJ500 MEJ510 0-15 2” DryMEJ603LP-01* — 0-15 2-1/2” GlycerinMEJ501 MEJ511 0-30 2” DryME50ECO-2 — 0-30” WC 2-1/2” DryMEJ502 MEJ512 0-60 2” DryMEJ504 — 0-160 2” DryMEJ505 — 0-200 2” DryMEJ600-02 MEJ516 0-300 2” DryMEJ603HP-01* — 0-300 2-1/2” GlycerinMEJ580*** — 0-300 4” DryMEJ542** — 0-400 2-1/2” Glycerin— MEJ524* 0-400 2-1/2” GlycerinMEJ552* MEJ526** 0-400 2-1/2” Glycerin* Brass Pipe Thread; Stainless Steel Dial** Stainless Steel Gauge *** Plated Steel Gauge4 1/2” Steel Case Pressure Gauge0-300 #, 1/4” Bottom InletProtectiveBootPRESSURE GAUGE ACCESSORIESGauge soldseparatelyMINIATURE RAY SNUBBERRS-22PRESSURE TEST ASSEMBLIES1/4” Male x Female Snubber comes withthree pistons for different snubbing levels.STA1-30# OR STA1-300#This pressure test assembly is to check forpossible gas leaks in piping systems whereservice is interrupted, such as “out of gas”conditions. It is not to be used as the onlymeans of testing new gas systems or existingsystems where new equipment is installed.See NFPA54 for leak testing requirements inthese systems. Schraeder valve (pack of 6)and hardshell carrying case included.Available in 30# and 300# configurations fortesting downstream of 1st stage regulators.STA1-300# - uses the VA series valve adapters forpressure testing.STA1-30# - uses the VB series valve adapters forpressure testing.Pressure Range Bottom Inlet Back Inlet0-300# B213-300BM-S* ----0-400# B213-400BM* B213-400BK*0-400# J542***Stainless steel dial, brass stem**Stainless steel dial and stem for LPG or NH3 serviceD2020 MAGNAHELICPRESSURE GAUGE4” Dial, 1/8” high and low pressure taps.Indicates positive, negative, or differentialpressure. Rated total pressure: -20”Hg. to15 psig.AdaptersVA1 - connects to the standard Schraeder valve, 1/8"VA2 - connects to the standard Schraeder valve, 1/4"VB1 - Connects to the Presto Tap type valve, 1/8"VB2 - connects to the Presto Tap type valve, 1/4"STA-2Male X Female POL flexible tool for pressuretesting service lines following out of gascalls. Installs between the service valve andregulator pigtail.• Flexible design allows for easy installationwith minimum movement of pigtail, evenin underground tanks.• Shut-off valve prevents leaking servicevalve from affecting pressure test.• Shipped in a hardshell plastic case.- 150 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

PRESSURE TEST EQUIPMENTPRESSURE TEST ASSEMBLIES (CONTINUED)HIGH PRESSURE TEST BLOCKHPTA-30For pressure testing new piping systemsG64-002 SCHRADER VALVEELECTRONIC MANOMETERSEM151The EM150 provides a simple, time consciousalternative to U-tube pressure testing. Thisunit measures ±20”W.C. Ideal for testingresidential and light commercial scenarios.The rugged EM150 has a protective rubberboot and integrated magnet. Unit comes withtubing and adapter. The EM150 is designed tomeasure at an accuracy of ± 1.5%.Features:• Auto power off• Rubber boot with built in magnet• .05 resolution below 9.95”• -20 to +20” measurement range• Battery life of 50 hours (min.) with alkalinebatteryUNIVERSAL PRESSURE TEST KITSKVA - Type A - standard Schrader valve connectionSKVB - Type B - 1/4" flare style Schrader valve connectionAccessories:AC319 - Soft shell carrying caseBF100 - Replacement brass adapterPRESSURE TEST VALVESWATER MANOMETERSD1212SLACK TUBE MANOMETER KITKit includes:• D1211-16 slack tube manometer• Plastic carrying case• 3/4 oz. bottle of fluorescent green colorconcentrate with wetting agent• Two 1/8” pipe thread rubber tubing adaptors• 1/8” to 1/4” pipe thread bushing• 3’ of 1/4” ID rubber tubing• Rubber tubing adaptor to fit standard7/16” spud.These valves are designed to be installedinto regulator pressure taps (1/8” NPT),or other pressure taps in the system, forpressure reading without “breaking thesystem”.VB1 & VB2 PRESSURE TESTVALVEValve without 54 orifice. Can be used inlow pressure applications or in openingswhich have a 54 orifice (Fisher regulators &Sherwood tank valves have a 54 ofifice intheir pressure taps and can use this valve).VB1 1/8" MPT x M. FLAREVB2 1/4" MPT x M. FLARED1222Economy Water ManometerRigid manometer with 2 magnets, bottle of dye,and 3’ of 5/16” ID tubing.EESL1006Replacement HoseCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 151 -

FLOAT GAUGESMAGNETIC FLOAT GAUGESFor lift truck cylinders, ASME tanks, 420#cylinders, and motor fuel tanksDOMESTIC TANK GAUGESThe item numbers are for junior flushmounted gauges. If the gauge ismounted on a riser, add the heightof the riser to the part number, i.e. agauge for a 41” diameter tank witha 4 1/2” riser is TJ41-4 1/2. For a seniorgauge, substitute an “S” in place of the“J” in the item number.Available in remote and non-remotestyles. Standard dial is non-remote.Tank Item #Diameter Flanged* 1” Threaded 1 1/4” Threaded24” TJ24 TJ24-BS-1” TJ24-BS30” TJ30 TJ30-BS-1” TJ30-BS37” TJ37 TJ37-BS-1” TJ37-BS41” TJ41 TJ41-BS-1” TJ41-BS* Flanged gauges are also available with senior heads.MAGNETIC FLOAT GAUGES (CONTINUED)Item #TA237AJA250JFG3981-001MOTOR FUEL TANKGAUGESItem #TankTop Mount Upper 45 Center Mount Lower 45 Dia.CVT10 CVA10 CVC10 CVAB10 10”CVT12 CVA12 CVC12 CVAB12 12”CVT13 CVA13 CVC13 CVAB13 13”CVT14 CVA14 CVC14 CVAB14 14”CVT16 CVA16 CVC16 CVAB16 16”CVT18 CVA18 CVC18 CVAB18 18”CVT20 CVA20 CVC20 CVAB20 20”CVT24 CVA24 CVC24 CVAB24 24”420# CYLINDER GAUGESDescription1 1/4” threaded gaugeJunior flange mount gauge1” threaded gauge150 GALLON HORIZONTALGAUGETYPICAL GAUGE SIZING GUIDETANK120 Gallon 24” diameter250/350 Gallon 30” diameter500 Gallon 37” diameter1000 Gallon 41” diameterItem #TA130 ADescription1 1/4” threaded gauge for top mountinstallation . For tank diameters of 24”.DFG3010Replacement gauge for ManchesterM681438L 100# A.S.M.E. Cylinder.DFG3010-DDial for above replacement gauge.LIFT TRUCK CYLINDERGAUGESCylinder Size Item #Flange 3/4” Threaded 1 1/4” ThreadedMounted20# Universal LT20-U — LT20-U-BS33# Universal LT33-U LT33-U-3/4 LT33-U-BS43# Universal LT43-U LT43-U-3/4 LT43-U-BSGAUGES FOR LARGE STORAGE TANKSTAYLOR GAUGESItem #*Tank DiameterM072H4202B 72”M109H4202B 108”M129H4102B 130”*Add -A suffix to include flangeadaptor for tank inlet.Item #Tank DiameterM4102ADL Taylor Replacement dialR5015S00481 Rochester 8” dialVIS3350X2Set of 8 screwsVIS4102BOO-ringVIS4102BGGasketR003-00022 Rochester 8” crystal- 152 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

GAUGE DIALS & ACCESSORIESGAUGES FOR LARGE STORAGE TANKS (CONT)REPLACEMENT DIAL ASSEMBLIESROCHESTER DIALSME930-72Part No. Type Style Dial FaceDialSizeTankDiameterME930-72 DOT Standard Glow/Black 4” 72”ME930-79 DOT Standard Glow/Black 4” 79”ME930-84 DOT Standard Glow/Black 4” 84”ME930C-72 DOT Classic Silver/Black 4” 72”ME930C-79 DOT Classic Silver/Black 4” 79”ME930C-84 DOT Classic Silver/Black 4” 84”ME940-108 ASME Standard Glow/Black 8” 108ME940-130 ASME Standard Glow/Black 8” 130ME940C-108 ASME Classic Silver/Black 8” 108ME940C-130 ASME Classic Silver/Black 8” 130the original buyer to be free of defects in material and workmanship under normal service and usefor two years from manufactured date.R5-39 R5-1951 RS17-5-39 R5-2591Item # Dial Size ApplicationR5-1 Senior ASME 5-95%R5-39 Junior Remote Ready ASME 5-95%R5-465 Junior Vertical DOT 10-82%R5-1951 Snap on Vertical DOT 10-80%R5-917 Junior Motor Fuel TankR5-413 Screw On 20# Forklift CylinderR5-414 Universal 33 1/2# Forklift Cyl.R5-415 Universal 43 1/2# Forklift Cyl.R5-2591 Snap On 33 1/2# w/ 3/4” gaugeR5-2445 Snap On 33 1/2# w/ 1 1/4” gauge130021UNIVERSAL DIALSFor use on ASME tanks.Item #Dial SizeRS17-5-1 Senior glue-on kitRS17-5-39 Junior glue-on kitCVD-U Taylor Junior screw-on kit130021 Taylor junior screw onCVD-UG Jr. Replacement Dial forUG TanksME931ME932CVD-BSTAYLOR VISIBLEREPLACEMENT DIALSFor brass threaded gauges.Part No. Connection ConnectionME931 2-1/2” MNPT 1/2”-13 FemaleME932 Weld 1/2”-13 FemaleGAUGE DRILL GUIDECenters drill bit for drilling out brokengauge screws.Item #FGDG-JRFGDG-SRFGDG-JR-TAPFDDG-SR-TAPGauge SizeJunior guideSenior guideJunior tapSenior tapItem # ApplicationCVD-BS Domestic tanksCVD-MF Motor fuel tanks*CVD-33LT-U 33 1/2# universal forklift cylinder, JR bolt on*CVD-33LT-3/4 33 1/2# universal forklift cylinder, 3/4 threaded*CVD-33LT-1 1/4 33 1/2# universal forklift cylinder, 1 1/4 threaded130022 same as CVD-BS, but with remote ready feature*43# cylinders use the same replacement dials as the 33# cylinderGAUGE REPLACEMENTPARTS:GasketsItem #VISJGGVISSGGScrewsItem #VISJGSVISSGSGauge SizeJuniorSeniorGauge SizeJuniorSeniorCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 153 -

REMOTE GAUGES & GAS DETECTOR SYSTEMSREMOTE INDICATING GAUGE PARTSSENDING UNITSGauge types:R - RochesterT - TaylorGAS AND CO DETECTORSSENSIT-TKX• Finds leaks quickly• High sensitivity• Tick rate control• Low initial cost• Low maintenanceItem # OHM Type ApplicationSU90-UNIV 90 T GM (Mid ‘96 & older) (Also usedw/remote receiver and PRINS Kits)R5-801 90 R GM (Mid ‘96 & older) (Also usedw/remote receiver and PRINS Kits)*Depending on year make and model, other sending units areavailable.GAS LEVEL MONITORING SYSTEMSItem #RECEIVERS136520Can be used for remote tank level readingin lieu of tying into gasoline gauge.SQUIBB-TAYLORSTATIONARY TANKMONITORFor commercial applications. This systemconsists of two components - a sensorinstalled at the propane tank and amonitor placed at a remote location.Propane level in the tank is displayed bythe monitor. The 136619 monitor has analarm that can be adjusted between0-99%Application136619 Commercial/Industrial - 120 V ACWILL CALL MONITORComplete with 20’ Cable ready toconnect to any R3D Remote Ready Dial.Extendable with 50’ Cable Extension Kit.Easy to read display activated by pushbutton.Mounting bracket and AAA batteriesincluded.P100SENSIT® P100 PERSONALSINGLE GAS MONITORProtect yourself fromhazardous gases!SENSIT® P100 is a single gas personmonitor designed to warn the userof hazardous gases in their workingenvironment.Easy to UseLow MaintenanceLow Initial CostP100 Standard Features• One Button Operation• Audible Alarm• Visual Alarm• Vibration Alarm• STEL and TWA Alarms• Alarm Event Memory• Easy Field Calibration• 2-Year Operation• Limited 2-Year Warranty(Including Sensor)• Extended Warranty AvailableAvailable SensorsHydrogen Sulfide (H2S)Hydrogen Cyanide (HCN)Oxygen (O2)Carbon Monoxide (CO)Chlorine (Cl2)Nitric Oxide (NO)Nitrogen Dioxide (NO2)Sulfur Dioxide (SO2)Item NumberWILL CALL MONITORGAUGE PARTSDescription136100 Will Call Monitor 3620 w/20’ Cable136105 50’ Cable Extension Kit (not shown)BOLOThe BOLO is a battery operated (2 AA’s) for the detection ofcombustible gas leaks. The unit has a folding sensor wand thatdefects natural gas, propane, hydrogen, butane and more.The BOLO has a variable tick rate alert and dual LED visualalert. Kit includes: detector, soft pouch, batteries, earphonesand hard shell case.- 154 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

PIPE LOCATOR, GAS IGNITERS & THERMOCOUPLESPIPE AND CABLE LOCATOROLYMPIAN GAS IGNITERSCABLE HOUND DSP88-20-011The Cable Hound Receiver with DigitalSignal Processing (DSP) can filter out virtuallyall unwanted noise. Can be usedto locate gas and water pipes, buriedcable, tracer wires, and tapes. Qualitypadded headphones are included.GM-3• Continuous ignition, will not blow out• Refillable• Fuel viewing windowGM-9• 2 pack child-resistant igniters. Buyone, get one free packaging.GM-3X• Continuous ignition, will not blow out• 15” flexible nozzle for hard to reachpilots• Refillable• Fuel viewing windowJOHNSON CONTROLSSTANDARD BASOTHERMOCOUPLEThe K15 standard thermocouple is usedfor Baso, Basoid, and Basotrol valves andswitches.Item # Length Millivolt RangeK15DS-18 18” 20-28 mvK15DS-24 24” 20-28 mvK15DS-30 30” 20-28 mvK15DS-36 36” 20-28 mvK15WS-48 48” 30-35 mvSNAP-IN THERMOCOUPLEThe K15 Snap-In thermocouple has asnap-in clip for fast, easy assembly tovalves and switches and Basotrol valveswith automatic pilots.Item # Length Millivolt RangeK15FS-24 24” 20-28 mvK15FS-36 36” 20-28 mv“HUSKY” HIGHPERFORMANCETHERMOCOUPLEThe K16 “Husky” thermocouple is a heavyduty, high output, high performancethermocouple. It replaces Baso 17D, 50,58D, 87D, 88D, 97D, 107D, and K15DAthermocouples. Complete with adaptors.Item # Length Millivolt RangeK16BT-18 18” 25-35 mvK16BT-24 24” 25-35 mvK16BT-30 30” 25-35 mvK16BT-36 36” 25-35 mvK16WT-48 48” 25-35 mvK16WT-60 60” 25-35 mvK16WT-72 72” 25-35 mv“SUPER SLIM JIM”UNIVERSAL REPLACEMENTTHERMOCOUPLEThe K19AT is used with all “G” And “H”Baso valves as well as automatic pilotvalves made by other control manufacturerswhose power unit connector is likethe Baso series.Item # Length Millivolt RangeK19AT-18 18” 25-35 mvK19AT-24 24” 25-35 mvK19AT-30 30” 25-35 mvK19AT-36 36” 25-35 mvK19AT-48 48” 25-35 mvK19AT-60 60” 25-35 mvK19AT-72 72” 25-35 mvCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 155 -

GAUGING DRILLS & ACCESSORIESJOHNSON CONTROLS (CONTINUED)J999 SERIESUNIVERSAL PILOT BURNERSMulti-mount universal replacement pilotburners. Supplied in three models.Item #Pilot TypeJ999MHA-2 “L” ChannelJ999MKA-2ShellJ999MYA-2 “Y” ChannelJ999MDA-2 “J” Series CombinationALUMINUM PILOT TUBINGItem #Description32-203 3/16” OD 50 ft.32-204 1/4” OD 50 ft.32-205 5/16” OD 50 ft.REAMERS AND BROACHESQTL050Burner BroachFor reaming and cleaning ports. Will fiteither QTL-061 handpiece or QTL-072 pinvice. Tapers from 1/8” square.QTL068Small Reamer3/32” diameterFor reaming orifices. Tapered point allowsfine adjustment of large or small burners.QTL069Medium Reamer1/8” diameterFor larger orifice sizes.GAUGING DRILLGAUGING DRILLSAll drills have brass handles with the sizestamped on the top and side for quickreference. Individual drills are stocked insizes 24 (Q24) through 80 (Q80).PILOT BROACHESQTL070Large Reamer5/32” diameterReams proper diameter hole to allowpress fit for QMI-100 adaptor. UseQTL-061 reamer handpiece.GAUGING DRILL SETSPlastic case displays drills when openedfor easy selection. Each space clearlymarked for drill size.Item #Drill SizesQDS-1P* 40-80QDS-2P* 19-60QDS-4P 19-39* These drill sets are available with ametal caseQPB-817 Tapers from .008” to .017”QPB-1217 Tapers from .012” to .017”QG3015 Tapers from .003” to .013”QPB-4313Taper Broach with handle.Tapers from .003” to .013”FIVE CORNERED REAMERSQG5080 # 80 ReamerQG5090 # 90 ReamerQG5000 Reamer Kit (# 20 - # 90Reamer)- 156 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

ORIFICESORIFICESORIFICES (CONTINUED)QA-1 ADAPTORThis adaptor will recondition many oldorifice fittings. Remove the existing orificeand hold in the QT-50 anvil. Drill it out withthe QT-20 reaming drill which provides theproper hole diameter for the adaptor.Drive the adaptor into the orifice with alight hammer blow. The QT-40 crimpingtool is then inserted and struck by ahammer to form a crimp.PLUG ORIFICESDrill SizeItem # ThreadLP NatQA-8 16x36 72 56QA-11 1/4x28 72 56QA-22 5/16x27 72 56QA-32 11/32x32 72 56QA-44 3/8x27 72 56QA-55 7/16x27 72 56CAP ORIFICESItem #DescriptionDrill SizeLP Nat*QC-6Flat end 3/8” x 27 threadQC-8 Flat end 1/8” pipe thread 72 56QC-9 Removable orifice 3/8” x 27 thread. 78Combination of QC-6 andQA-8 plug orificeQCO-401Cap orifice*Note: QC-6 cap orifice is blank and must be drilled todesired size.PILOT ORIFICESQBA-7181/4” compression connection to 7/16”x 27 thread, double orifice, CF-641included. Replaces Baso # Y90AAorifice. Fits Baso B, C, D, F, and R.Double orifice: LP - .012” area, Nat. -.021” areaQGR-804Aluminum - For 1/4” compressionconnection. Replacement pilot orificefor Robertshaw A1810 pilot (2B).Drill sizes: LP - .008”, Nat. - .016”ORIFICE KITSBLOWERQGR-813Aluminum - For 1/4” compressionconnection. Replacement orifice forRobertshaw A1820 (2C) and A1830 (2CH)pilots.Drill sizes: LP - .010”, Nat. - .018”QGR-821Aluminum - 1/4” tube size. Replacementorifice for Robertshaw A1820 (2C) andA1830 (2CH) pilots.Drill sizes: LP - .010”, Nat.-.018”QM-131Serviceman’s Orifice Assortment KitOver 300 of the 23 most common orificesin one convenient cabinet. A chartdescribing and illustrating each orifice isinside the cover.QM-138Economy Orifice Assortment KitSmaller version of the QM-131. Kit has 203of the 18 most common orifices.QM-132Master Pilot Orifice KitOver 100 of the 32 most common pilotorifices. A chart is included describingand illustrating each part and thread size,replacement part number, etc.QM-137Economy Pilot Orifice KitSmaller version of the QM-132. Kit has137 of the 18 most common pilot orifices.B700HANDHELD ELECTRICBLOWER FOR HEATERS,PILOTS, BROODERS, ETC.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 157 -

GAUGING DRILL ACCESSORIES & PAINTSPECIAL TOOLSQTL072 PIN VISEFor holding large gauging drills securelywhile reaming.QT-50 SAFETY ANVILOrifice caps can be held in this anvil whilereaming.QTL061 HANDPIECEFits large reamer QTL070 and QTL050burner broach.QT-30 DRIVING TOOLUsed to drive QA-1 adaptor into recessedarea.QT-40 CRIMPING TOOLUsed to crimp the QA-1 adaptor.QMI-100KADAPTOR TOOL KITIncludes 200 QA-1 adaptors, QTL061handpiece, QT-40 adaptor crimping tool,QT-30 adaptor driving tool, QTL070 largereamer, and QT-50 safety anvil..SUMTER COATINGS PAINTItem #880W2203880W2201880D4450888S2005888S2006886LINESumter Coatings Premium TankCoatings are formulated specificallyfor propane tanks to undergo therigorous conditions that many tanks areexposed to durin their life. Available inpopular whites, aluminums, and pastelcolors• GREAT DURABILITY• GOOD COLOR RETENTION• GOOD GLOSS RETENTION• GREAT CAMOUFLAGEColorNo. 5 Blued whiteNo. 7 Silicone AlkydPearl Aluminum Grey EnamelSC2000 AluminumSC2110 Strontium Chromate AluminumEnviro-Tuff colors (available in various colors;used mainly for tank domes)Various other color options are available. Contact yourRutherford Equipment representative to discuss special orderoptions.PRIMERS AND SPECIALITY PRODUCTSMETL051SERVICEMAN’S FRIENDFor use with flow meters, manometers,and other pressure test equipment. Oneend is 1/8” MNPT, 1/4” MNPT, and special5/16” x 32 thread. Other end has regularhose fitting and 1/8” MNPT. Hose can beused on either end.Part# Description880N2209 Foot Ring Protector855W1370 Uni-Pox PrimerSC-PL005 Penetrol Paint Additive856X2210 XL ThinnerSC-BC003 Bucket Cover (4 pack)SC-TTB002 Tank Trim Brush w/ 12" HandleSC-WB042 Wire Brush w. Metal ScraperSC-BG001 Bucket Grid w/ DimpleSC-TR09K Tank Roller - 9"SC-CR063 Contour Roller - 7" Complete AssySC-CR006 Contour Roller Refill for 7" Assy***Other Paint Tools & Accessories Are Available- 158 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

PIPE DOPE, LEAK DETECTION & METHANOLTHREAD SEALING COMPOUNDSGASOILA SOFT-SETNon-hardening Teflon paste. Non-toxic, easyto apply down to -40°F. Will not stain hands orclothing.LIQUID LEAK DETECTOR5 SECOND SHERLOCKLEAK DETECTORItemFPSS04 - 1/4FPSS08- 1/2Size1/4 pint1/2 pintPLS #2 (JOHN CRANE)LP Gas industry’s leading compound for sealingpipe joints. UL listed for propane. Spreads easily.Item #SizeC00203 1/4 pint (1#)C00225 1 pint (4#)Item #L-1P-EBL-1P-ESBL-1G-LL-1G-RDescription1 pint empty bottle w/ brush1 pint empty spray bottle1 gallon low temperature leak detector (red)1 gallon regular leak detector (blue)JOMAR TEFLON PASTEHigh quality multi-use Teflon easy spread threadsealant.Item #SizeJ400-001 2 oz. tubeJ400-002 1/4 pintJ400-003 1/2 pintMETHANOL INJECTORSPURE ANHYDROUSMETHANOLFactory shipped in 55 gallon drums.JOMAR “GREEN STUFF”Slow drying, soft setting, non-hardening pipethread compound.Item #SizeJ400-102 1/4 pintRECTORSEALSlow drying, soft setting pipe thread sealant.Item #Y502Y504TEFLON TAPESize1/4 Pint1/2 PintA Teflon sealant that remains plastic permanently.520” rollItem #WidthTEFTAPE 1/2”TEFTAPE-3/4 3/4”TEFTAPE-1 1”ABJ-2ALCOJECT METHANOLINJECTORHolds 5 oz. of methanol. Check valveprevents back flow of propane. Usedto add methanol to 100, 200, and 420lb. cylinders.Recommended usage:100 lb. cylinder 3 oz.200 lb. cylinder 6 oz.420 lb. cylinder 12 oz.LC-1 METHANOL INJECTORFill the quart size container with methanol.Attach to the vapor connection on thetank. Pressure equalization forces themethanol into the tank.YELLOW TEFLON TAPESame teflon sealant but yellow in color. 260” rollItem #Width46330 1/2”46345 3/4"CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 159 -

DECALSCYLINDER DECALSCYLINDER/MOTOR FUEL FILLING DECALS & SIGNSFD/HZ116FDOT16CS33V44R3-in-1 label• DOT 1075• NFPA hazard rating• Warning ANSI/NFPAPamphlet 584 3/4” x 6 3/4”FDOT53-R4” x 9” - Printed black onyellow vinylV56R3 3/8” x 10” - Red, black,yellow, and blue on whitevinylV55RV128Required onhorizontal cylindersmanufactured prior to10/1/98.2-in-1 combination• DOT 1075• Warning ANSI/NFPAPamphlet 583 3/8” x 7 3/8”CYLINDER/MOTOR FUEL FILLING DECALS & SIGNSLPFI-V121 LPFI-P101 LPFI-P102For Emergencies Call:FDOT1314” X 21 1/4”Cylinder/MotorFuel Instructionsdecal.V3015” X 22” MotorFuel Filling Decal.CYLINDER EXCHANGESIGNFD/V1412” X 16” Vinyl SignFD/C37GV273” X 11.5”Black on WhiteVinyl.12” X 24” Coroplast w/ grommetsP11116”X20” OPD ALERT SIGN.Explains to your customerwhy they must have anOPD valve.PFS2’ x 4’Aluminum Sign,Double FacedPFS-FRSupport FramePCE2’ x 4’AluminumSign, DoubleFaced- 160 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

TRUCK DECALS & SIGNSFDOT4DecalFDOT3Vinyl PlacardFDOT4-MMagnetic SignCG126-FOMetal Flip-over Placard13 1/2" x 13 1/2"P1318" x 24"TRUCK DECALS & SIGNS (CONTINUED)FD/V106FNQTFQTFD/V107DECALSTest/Retest Kits for NQT/QT. Each kit contains 2 thermal die cutsheets plus sheet of numbers.FDOTV-92R e d o n y e l l o wv i n y l 1 6 l a b e l s .3/8” x 1 3/4” eachFPLAAluminum Placard HolderV1513" x 8.5"Red on white vinyl decalV1505" x 13"Red on white vinyl decalP1522" x 15" Poly, Transport TruckUnloading ProcedureFRRC4” X 36” Reflective Scotchlite5” X 7” - Carriedunattached in cabof vehicleItem #FDOT-V60FDOT-V83FDOT-V83CYLProduct CoveredMethanolBulk PropanePropane CylindersV316” X 15.5” Annual Inspection Kit(Test Date)V326” X 15.5” 5 Year Inspection Kit(Retest Date)P140Emergency Electrical Shut-Off SignCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 161 -

DECALSBULK PLANT/TRUCK DECALS & SIGNSBULK PLANT/TRUCK DECALS & SIGNS (CONT)FD/PFD/LIQItem #DescriptionFNSOFD-25’ 12” x 18” Decal (25’)FNSOFD-50’ 12” x 18” Decal (50’)FNSOFS-25’ 12” x 18” Metal Sign (25’)FNSOFS-50’ 12” x 18” Metal Sign (50’)V81Decal - V81Poly Sign - ESO/SIGN PUSHV82Decal - V81Poly Sign - ESO/SIGN PULItem #FDOT1-2”FDOT1-4”DescriptionDecal w/ 2” lettersDecal w/ 4” lettersV134Emergency Shutoff decal, 2 1/2" H x 6" WP140 Emergency Electrical Shut-Off SignP135(10” x 12” Sign)Item #FDOT2V28BFDOT6FDOT6-1P28CDescriptionDecal w/ 2” lettersDecal w/ 4” lettersDecal w/ 6” lettersMetal Sign w/ 6” lettersPoly sign 2/2” lettersRESS(decal)FTC1(Sign) White letters on bluebackgroundALD4015-01(sign holder)NFPA-704-17” Storage Tank Diamond Hazard DecalNFPA-704-315” Storage Tank Diamond Hazard DecalNFPA-704-1PDiamond Hazard PlacardMISCELLANEOUS DECALSFLPGDDecal w/ 2” lettersS5003” x 4 1/2”For bumpers of propane poweredvehiclesV624” x 5”SFX418Fire extinguisherdecal4"x 18"SFX418AFire extinguishersign4" x 18"Item #FDNS-2”FDNS-4”FDNS-6”FNSI-4”FNSI-6”FPNS-2”DescriptionDecal w/ 2” lettersDecal w/ 4” lettersDecal w/ 6” lettersMetal sign w/ 4” lettersMetal sign w/ 6” lettersPoly sign w/2” lettersB973' x 10' Banner- 162 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

TANK ACCESSORIESASME TANKSTANK SPECIFICATIONSSTANDARD DOMESTIC TANK SPECIFICATIONSItem # Size DimensionsV-60 Vertical 60 gal 24” DIA X 42” TALL60-A G/UG 60 gal 24” DIA X 37 1/2” OALV-120 Vertical 120 gal 30” DIA X 4’6” TALL120-AG/UG 120 gal 24” DIA X 68” OAL150-AG/UG 150 gal 24” DIA X 84” OAL250-AG/UG 250 gal 30” DIA X 94” OAL325-AG/UG 325 gal 30” DIA X 119” OAL500-AG/UG 500 gal 37” DIA X 119” OAL500-UG 500 gal 37” DIA X 119” OALAG/UG: Designed for either above or underground installation.All valves are under the dome.UG: Designed for underground installation. Tank has multivalveon 24” riser.TC1000Tank CradleSold IndividuallyTS1000Tank StrapsSold as a pairCapacity Diameter Length Tank Weight120 gal 24" 68" 257 lb120 gal (vert) 30" 54" 260 lb150 gal 24" 84" 314 lb200 gal 30" 79" 414 lb250 gal 30" 94" 483 lb325 gal 30" 119" 597 lb500 gal 37" 119" 949 lb850 gal 41" 165" 1440 lb1000 gal 41" 192" 1760 lb1450 gal 47" 208" 2658 lb1990 gal 46" 288" 3521 lbAPPROXIMATE VAPORIZATION CAPACITIESOF AW&T PROPANE TANKSBTU PER HOUR WITH 40% LIQUID IN TANKDOMESTIC SYSTEMSTANK SIZEPREVAILING AIR TEMPERATUREWATER CAPACITY 20°F 60°F120 235,008 417,792150 290,304 516,096200 341,280 606,720250 406,080 721,920325 514,100 937,900500 634,032 1,127,168850 943,904 1,715,3551000 1,088,472 1,978,0511450 1,485,961 2,427,4471990 2,059,960 3,365,726VAPOR PRESSURES OF PROPANETEMP. PRESS. TEMP. PRESS. TEMP. PRESS. TEMP. PRESS.130°F 257 psig 70°F 109 psig 20°F 40 psig -20°F 10 psig120°F 225 psig 65°F 100 psig 10°F 31 psig -25°F 8 psig110°F 197 psig 60°F 92 psig 0°F 23 psig -30°F 5 psig100°F 172 psig 50°F 77 psig -5°F 20 psig -35°F 3 psig90°F 149 psig 40°F 63 psig -10°F 16 psig -40°F 1 psig80°F 128 psig 30°F 51 psig -15°F 13 psig -44°F 0 psigCYLINDER TOOLS/ACCESSORIESBOT-L-RENCHTools for removing and installing cylindervalves.R20-3 R20-4Item # DescriptionR20-1 POL plugR20-2 WrenchR20-3 Wrench handleR20-4 Chain vise assemblyR20-5 Plumbers pot wrenchR20-6 Combo Forklift valve wrenchR20-8 OPD valve wrench5906083/16 x 3 1/2" Cotter Pin Key for Tank DomesR20-6 R20-2 R20-5 R20-1R20-8CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 163 -

CYLINDERS10#, 20# & 33.5# ALUMINUM MARINE CYLINDERSPORTABLE D.O.T. CYLINDERSMANCHESTER STEEL VAPOR CYLINDERS Size Description Item #5# Vertical w/ OPD M1005433.5# VERTICAL/9151TC5# VERTICAL 10# VERTICAL 20# 20# VERTICAL/9060TC.140# VERTICAL100# VERTICAL 420# VERTICAL Lift Truck CylinderALUMINUM VAPOR CYLINDERSSize Description Item #6# Vertical w/ OPD10# Vertical w/ OPD M10228.411# Vertical w/ OPD M10393.120# Vertical w/ OPD M1050420# Vertical w/ OPD & gauge M10834TC.120# Vertical w/OPD Quick Disconnect M1050220# Horizontal w/ OPD w/ gauge M10487TC20# HORIZONTAL/9061TC.130# Vertical w/ OPD M1160.830# Vertical w/ OPD w/ gauge M1166.230# Horizontal w/ OPD M1164TC.130# Horizontal w/ OPD w/ gauge M1175TC40# Vertical w/ OPD M1220.1340# Vertical w/ OPD w/ gauge M1222TC.250# 10# HORIZONTAL/9059TC.1Vertical w/ 10% POL & collar M14990TC60# Vertical w/ 10% POL & collar M142610# Vertical w/ OPD10# VERTICAL/9058TC.2M9058TC.2100# Vertical w/ 10% POL & collar M142820# Vertical w/ OPD M9060TC.1Product DataPropane100#WaterVerticalLengthw/HeightmultivalveDiameter&DiametercollarTare SkidM143620# Vertical w/ OPD & gauge M9060TC.4Capacities 200# Capacity Vertical OL w/ multivalve H D & gauge B Weight Quantity M14205.130# Vertical w/ OPD M9151TCCatalog No.DescriptionLb Gal420# Lb Vertical In w/ POL, In outage, In fill, Inrelief, & Lbgauge M1499.19059TC.1 ACME/OPD HORIZONTAL - MARINE - BOXED 10 2.328gal 23.6Vertical 16.4 ASME 11.13w/ multivalve 10.38 7.8& gauge 9.2 20M681438L9058TC.2 LIFT TRUCK/ ACME/OPD FLOOR VERTICAL BUFFER CYLINDERS 10 2.3(100#)23.6 16.4 11.13 10.38 7.8 9.4 20Size 9061TC.1 ACME/OPD Description HORIZONTAL - MARINE - BOXED Item # 20 4.6 DFG3010 47.6 Replacement 20.7 14.9 12.28 gauge for 7.8Manchester 18.0 M681438L 1620# 9060TC.1 Vertical ACME/OPD Aluminum VERTICAL Floor Buffer M9285 20 4.6 DFG3010-D 47.6 Replacement 20.7 14.9 12.28 dial for 7.8 Manchester 13.0 M681438L 16 100#A.S.M.E cylinder20# 9151TC Vertical ACME/OPD Steel VERTICAL Floor Buffer - MARINE M5455A 33.5 7.4 80.0 28.2 22.38 12.28 7.8 18.0 1233 1/2 #Catalog No.Steel L.T. w/ fill valveDescriptionM5580AKg Liter Kg mm mm mm mm Kg33 1/2 # 9059TC.1Aluminum ACME/OPD L.T. HORIZONTAL w/ fill valve - MARINE - BOXED M9315A 4.54 8.9 10.70 416 283 264 197 4.2 2043 1/2 # 9058TC.2 Steel ACME/OPD L.T. w/ VERTICAL fill valve M5595A 4.54 8.9 10.70 416 283 264 197 4.3 2043 1/2 # 9061TC.1Aluminum ACME/OPD L.T. HORIZONTAL w/ fill valve - MARINE - BOXED M9161 9.07 17 21.59 526 379 312 197 8.2 169060TC.19151TCACME/OPD VERTICALACME/OPD VERTICAL - MARINE9.0715.2172821.5936.295267163795683123121971975.98.21612For lawn mower motor fuel cylinders see page 212VERTICAL DISPENSER W/BASE & CRASH POSTSProduct DataWaterCapacityPropaneCapacityDiameterOverallHeightWorkingPressureTareWeightDIA.2A 2BCatalog No.2901422014290112901623354*2900522774Description660 GALLON ASME VERTICAL DISPENSER1150 GALLON ASME VERTICAL DISPENSER1250 GALLON ASME VERTICAL DISPENSER1600 GALLON ASME VERTICAL DISPENSER2000 GALLON ASME VERTICAL DISPENSER660, 1150, 1250 & 1600 TANK BASES660, 1150, 1250 & 1600 CRASH POST & RAILINGGal6601150125016001999N/AN/ALb528920100012801600N/AN/AIn42”48”48”48”54”N/A120”In119”159”169”216”220”10.5”35.5”250250250250250N/AN/ALb1999300032904150602041359080% LIQUIDLEVEL LINETANKHEIGHTSTANDARD ITEMOVERALL INCLUDES TWOHEIGHT SIGHT GAUGESPLACED SOTHE ENTIRE LIQUIDLEVEL OF THEDISPENSER ISAVAILABLE FORDIRECT READING1’1’-10 1/2”5546 71B31A3’-10”*Base, Crash Post & Railing is not available on this tank. Pumps and meters can be purchased at your local propane distributor.10FT “X” FRAME STEEL DISPENSER BASE- 164 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

MOTOR FUEL TANKSMotor Fuel ASME Tanks & BracketsPart No.229872255472174472380417234672006720087212347231272445723567260872002472059723657Diameter(Inches)121213161616161820202020202424Length(Inches)507255344252628048486060606262SINGLE TANKSMAWP(PSI)312312312312312312312312312312312312312312312WaterCapacity(Gallons)22.63329.326.232.941.449.881.858.458.474.274.274.2109.3109.3LPCapacity(Gallons)18.0826.423.4420.9626.3233.1239.8465.4446.7246.7259.3659.3659.3687.4487.44Weight(Pounds)7010510898106152146234177196217231225322370Part No.270155270162270159270160270161270158270157Diameter(Inches)10 & 1210 & 1310 & 1310 & 1411 & 1113 & 1313, 13 & 11MANIFOLD TANKSLength(Inches)3030 & 3035 & 353040 & 403234, 37 & 36MAWP(PSI)312312312312312312312WaterCapacity(Gallons)22.424.627.926.930.232.850.25LPCapacity(Gallons)17.9219.6822.3221.5224.1626.2440.2Weight(Pounds)113135140116130133230BRACKETSPart No.2396423964.12350423504.126362636.125182518.12518125062506.12529125291.125072507.125092509.12507125071.12509125091.1Diameter(Inches)101012121414161616181818182020242420202424Weight(Pounds)242425252828393960383862624040464663636464DescriptionStandard - GrayStandard - WhiteStandard - GrayStandard - WhiteHeavy Duty - GrayHeavy Duty - WhiteStandard - GrayStandard - WhiteHeavy Duty - GrayStandard - GrayStandard - WhiteHeavy Duty - GrayHeavy Duty - WhiteStandard - GrayStandard - WhiteStandard - GrayStandard - WhiteHeavy Duty - GrayHeavy Duty - WhiteHeavy Duty - GrayHeavy Duty - White800-399-5628Fax: 800-877-9988www.mantank.comsales@mantank.comCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 165 -

CYLINDER TOOLS & ACCESSORIESCYLINDER TOOLS/ACCESSORIES (CONTINUED)CYL-VISECYLINDER CLINCHEREconomical vise designed to securecylinders up to 100# capacity for easyvalve removal. Use a socket wrench totighten and loosen the strap.CP9361-1AIR SCRIBE KITAir operated tool for marking DOTcylinders after required inspection.Writes quickly and easily on steel.CP054177Replacement Stylus for Air Scribe.CYLINDER MARKING DIESItem #HL4980-14HL4980-04HL4980-EDescription1/4” Letter Set1/4” Number Set1/4” Letter “E” onlyRCA CYLINDERSTAMPING ANVILHolds 1/4” die in place and providesbacking behind collar to preventcollar bending.CYLINDER TOOLS/ACCESSORIES (CONTINUED)PORTABLE BEAM SCALES FOR CYLINDER FILLINGCYLINDER/TANK DOLLIESM1803DUAL CYLINDER RACKDesigned to secure two 30# cylinders.FORKLIFT CYLINDERBRACKETSItem #TB-2TB-3DescriptionFor horizontal cylindersFor vertical cylindersF1124 FAIRBANKSPLATFORM SCALEHeavy duty, cast iron beam scale designedfor rugged service.Platform size: 18” x 27”Capacity: 1000#REPK PURGING KITSafe, reliable method for purging LPGcylinders.CYLINDER TRUCKSItem # Cylinder SizeT7325-S 100#T7-900-4P 420#ME-350MVCYLINDER GUARD RINGw/ Cut-outRTC420MMANUAL TANK DOLLYWill move full 420# cylinders.S100SCAPCYLINDER CAPTU476A PIT GAUGEAccurately measure pitted areas ofrusted cylinders in the requalificationprocess. Unit comes with a leathercase.RTC420NGMUSCLE MAN TANK DOLLYTwo-wheel gear drive w/ forward andreverse speeds. Includes strappingsystem.- 166 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

TANK ANCHORS, CABINETSASME TANK & 420# CYLINDER ANCHORING SYSTEMMINUTE-MAN EZ ONE STEPANCHORING SYSTEMSecurely anchors tanks and cylinders inflood prone areas. Deluxe anchors havecompacting disks and stabilizing heads.Item # DescriptionMMA-1346 36” economy anchorMM2375 Stainless steel strapping (100’)MM2365 Coated 2 strap slingMM2382 Plastic sheathingMM2010 Bolts/nutsMMA-2741 AdaptorMM2730 Anchor drive machineCYLINDER STORAGE CABINETS (CONTINUED)20# CYLINDERSTORAGE CABINETSX Series Features:• locations for up to 3 safetyplacards• Heavy duty welded hinge• 24 and 36 cylinder cabinetshave double doors• Can be fastened to floor• Your choice of color with acrylicpaintCYLINDER STORAGE CABINETSRR1564LIFT TRUCK CYLINDERRACKRack holds four 33# lift truck cylinders.Bar locks for security. Multiple racks canbe bolted together.33# MOTOR FUELCYLINDER STORAGECABINETSM Series Features:• 3 safety decals• Tapered shelf front• Heavy duty welded hinge• Lockable latch• Meets all safety requirements• Assembled and ready to useAluminum option picturedItem # Holds DimensionsM4 4 cylinders 30” W x 40” HM6 6 cylinders 30” W x 55” HM8 8 cylinders 30” W x 70” HM12 12 cylinders 43” W x 70” HM16 16 cylinders 60” W x 70” HM24 24 cylinders 85” W x 70” HItem # Holds DimensionsX8 8 cylinders 27” D x 30” W x 50” HX12 12 cylinders 27” D x 43” W x 50” HX16 16 cylinders 27” D x 60” W x 50” HX18 18 cylinders 27” D x 43” W x 72” HX24 24 cylinders 27” D x 60” W x 72” HX24L (low profile) 24 cylinders 27” D x 85” W x 50” HX36 36 cylinders 34” D x 60” W x 72” H1# REFILLABLE CYLINDERSContains the following features:• Complies with DOT specificationsfor a refillable cylinder• Proprietary valve designwith positive on-off valve, relief& fixed maximum liquid levelgauge• 2 sizes for multiple applications• Empty cylinder filling time is 50-70 seconds using drift method• UL listed filling adapters anddrifting dispensers available• Safety fill valve prevents disposable container connection andrefilling• Recycled powder paint for maximum rust protectionENVIRONMENTAL BENEFITS• Refillable ... it costs more to recycle a cylinder than to build one• Eliminates millions of pounds of waste per year• Propane is listed as an approved, clean fuel alternative under the1990 Clean Air Act and the Energy Policy Act of 1992 Propanereduces greenhouse gas emissions• Propane is a non-toxic and non-poisonous fuel, so it's not harmfulto soil or waterCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 167 -

DISPENSING EQUIPMENT- 168 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

ACMDISPENSING EQUIPMENTComplete dispenserin square cabinetPOLComplete dispenserin angle cabinetPump Options:OPTIONSMeter Register Options:Blackmer Model # Size GPM* Motor SizeLGFIELGFIPELGRLFI-1/4LGL156A1”1”1 1/4”1 1/4” X 1”**61014221 HP1 1/2 HP2 HP5 HP*Pump ratings are based on 100# differential pressure.**With reducing flanges installed1” meter with a non-printingVeeder-Root mechanicalregister (Standard)1” meter with nonprintingItron E1000electronic registerMDispenser Accessories:DPKCylinder Purging System (Installed)1” meter with E:Count electronic registerLF1-C1 1/4” Connecting Kitwith Internal Valve & Cable ControlH16SSet of 16” Tank StandsF11241000# Fairbanks Single Beam ScaleTGP-20D20# ABC Class Fire ExtinguisherSKID-MOUNTWe now offer any of our dispensers skid-mounted to a 1000gallon tank. All piping is installed and pressure tested.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 169 -

DISPENSING EQUIPMENT- 170 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

DISPENSING EQUIPMENTPOL/QCC Filler Coupling Options:Lift Truck Filler Coupling Options:ME3901/4” MNPT X MPOLME7901 1/4” Female ACME x 1/4” MNPTME516ME796QCC X 1/4” MNPTQCC X 1/4” MNPT -Quick ConnectAdapter Options:ME7951 1/4” Female ACME x 1/4” MNPT -Quick ConnectACME Filler Coupling Options:ME210 - 1 3/4” Male ACME x 1/4” MNPTAdapt a 1 3/4” ACME filler coupling to usea POL, QCC, or lift truck filler coupling.ME1101 3/4” X 1/2” Short CouplingME568 - 1 3/4” Female ACME x FPOLAdapt a POL filler coupling to fillthrough 1 3/4“ filler valveswith nontronE1000ic registerME-M111ME1111 3/4” X 3/4” Short CouplingME308 - Female CGA 555 x FPOLAdapt a POL filler coupling to fillthrough a cylinder valve with a CGA555 liquid connectionME635-61 3/4” ACME x 3/4” Long CouplingS5LPAFPFPOL x Plug NippleAdapt a POL filler coupling to fillthrough a type 2 quick disconnectcylinder valveerted to a 1000tested.PRO-2100 Autogas DispenserThis unit is designed to meet your fleet motorfuel filling needs at a competitve price!Standard Features• Automotive LPG capable of dispensing any blend of Propane,Butane and other LPG's• Stainless steel & galvanized steel cabinet housing• Liqua Tech LPM102, oscillating piston,with Trac-Bearing chamber flow meter• 3 - 18 GPM flow capacity• Meter accuracy: + / - 4% NCWM Certified• Internal 60 - 80 mesh meter strainer• Piston type differential valve with o-ring seals• UL Listed, Brass/Bronze 3/4" ball valves• NEMA rated push button with LED back light On/Off switch• Chassis grounded to AC electrical system• Gasguard GG1E dispensing nozzle• 3/4" x 12', Electrically conductive, UL listed, 350 psigworking pressure dispensing hose• 120 vac, 60 Hz or 220 vac, 50 Hz electrical service• Standard - Explosion proof, USA-UL, with aluminum conduit• Dimensions: 15" x 11.5" x 54"CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 171 -

GRAVITY FILL KITSGF-1/2" & 3/4" PROPANE GRAVITY FILLING KITS5 612378123456784ME390 6" M. soft nose POL filler couplingB06X02 3/4” x 1/4” schedule 80 reducing bushingME821-6 3/4” Globe, quick acting hose end valve w/ 1/4” portMEJ400 1/4” liquid level vent valveGC06X120 3/4” liquid transfer 10’ hose assembly, MxMME449 3/4” liquid transfer valve with excess flow valveMEH225 1/4” hydrostatic relief valve*ME453 liquid withdrawal adaptor9 *ME458 liquid withdrawal adaptor (New Style)* For your convenience we have included both the “old” and “new style” liquid withdrawal adaptorsOPTIONS:To fill forklift bottles through the 1 1/4” M.ACME safety coupling, order the following items along with your GF-1 kit:ME220F 1 1/4” F.ACME x 1/4” FNPT lift truck connectorORME284F. POL x 1/4" MNPT AdaptorTo fill through a standard 1 3/4” filler valve, order the following items with your GF-1 kit:ME4501 3/4”F.ACME x 3/4”FNPT unloading adaptorME287F. POL x 3/4" MNPT Adaptor- 172 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

PUMPING SYSTEMSPUMPING SYSTEMSThe following kits are primarily designed to be used with a smallcapacity pump like Blackmer’s LGF1C (10 GPM) or LGF1PC (15 GPM)For a pumping system to perform properly, you must have highquality equipment installed in accordance with the manufacturer’srecommendations and the following good installation practices:1. The tank should be installed with as much vertical distancefrom the bottom tank outlet to the pump inlet as practical. Theminimum recommended distance from the bottom of the tankto the ground is 16” for good pump performance.CONNECTING KITSLF1-BDELUXE PUMP KITDeluxe kit includes Fisher’s 1 1/4” internal valve. All pipingcomponents are 1 1/4”. Designed for free standing pumpinstallations.See appendix for material lists & schematics of these kits.LF1-CDISPENSERCONNECTINGKIT2. Only bottom tank outlets should be used to supply gas to liquidpumps, and the size of these outlets should be no less than theinlet of the pump. There should be no restrictive fittings on theinlet side of the pump.3. The pump should be located as close to the tank outlet aspractical. A LP gas pump can push gas for reasonable distances,but cannot suck gas. Liquid gas must be fed to the pump bygravity.4. All positive displacement pumps require a bypass line to returngas back to the tank. The Blackmer LGF1E and LGF1PE pumpshave built in bypass valves. A line must be run between the pumpand the tank to protect the pump against excessive differentialpressure.5. Proper electrical wiring connections and correct wire size areimportant for good pump performance. Be sure the motorterminals are connected correctly for the voltage and rotationbeing used. Listed below are general recommendations forthe minimal wire size for more common wiring runs on 1 HP and1 1/2 HP single phase motors. Please comply with the motormanufacturer’s requirements concerning this matter.LF1-AG AUTOGAS DISPENSERCONNECTING KITIncludes the new MEC Fill valve with auxiliary inlet, allowing thebypass line to be run to a higher flow inlet.DISP-GK DISPENSER GAUGE KITThis option will equip a dispenser with the gauges necessary totroubleshoot problems in system operation. It can either be orderedwith a dispenser, or after the fact for retrofitting onto the dispenser.Length of Run Voltage Wire SizeMotor Size: 1 HP Single Phase100’ 115 #8100’ 230 #10200’ 115 #6200’ 230 #8Motor Size: 1 1/2 HP Single Phase100’ 115 #4100’ 230 #10200’ 115 #0200’ 230 #8BULKHEADSBULK PLANT BULKHEADSITEM#COUPLINGSSTH16X10 2” and 1 1/4”STH16X16 Two 2”STH16X16X10 Two 2”, One 1 1/4”STH24X16 3” and 2”STH24X16X10 3”, 2”, and 1 1/4”STH24X16X16 3” and Two 2”CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 173 -

BLACKMER PUMPSBLACKMER PUMPSBLACKMER PUMPS (CONTINUED)LGF DRIVE STYLEFLANGE MOUNTING -DIRECT MOTOR DRIVEThese small positive displacement pumps areideal for filling cylinders and motor fuel tanks.They mount directly to a C-face motor & havebuilt in “back to the tank” bypass valves.PUMP ONLYItem # Size CapacityLGF1E 1” 10 GPMLGF1PE 1” 15 GPMLGRLF1-1 1/4 1 1/4” 18 GPMLGF1 SERIESw/ 115/230V MotorItem # * Size HP CapacityLGF1E-101 1” 1 10 GPMLGF1PE-151 1” 1 1/2 15 GPMLGRLF-201 1 1/4” 2 18 GPMDM DRIVE STYLEBRACKET MOUNTING -DIRECT MOTOR DRIVEThese durable motor speed pumps offercapacities up to 35 GPM and are ideal formotor fueling, multiple station cylinder fillingand a variety or small transfer jobs. They aredesigned for foot mounting to a commonbase plate.PUMP ONLYItem # Size CapacityLGL1-1/4 1 1/4” 20 GPMLGL1-1/2 1 1/2” 30 GPMPUMP ASSEMBLYPump, coupling and coupling guard,mounted on a common base, ready toaccept a standard NEMA motor.Item # Size CapacityLGL1-1/4DM 1 1/4” 20 GPMLGL1-1/2DM 1 1/2” 30 GPMVB DRIVE STYLEBASE MOUNTED - V-BELTDRIVEPUMP ONLYCapacity is at 640 RPM and 50 psi differentialpressure.Item # Size CapacityLGLD2E 2” 67 GPMLGLD3F 3” 133 GPMLGLD4 4” inlet 3” outlet 270 GPMPUMP ASSEMBLYPump, hubs, sheaves, high-torque tripleV-belts and belt guard mounted ona common base, ready to accept astandard NEMA motor. Capacity at 640RPM and 50 psi differential pressure.Item # Size CapacityLGLD2E-VB 2” 67 GPMLGLD3F-VB 3” 133 GPMLGLD4-VB 4” inlet 3” outlet 270 GPMFLANGE MOUNTED PUMPSFOR BOBTAILS &TRANSPORTSCapacity is at 870 RPM and 50 psi differentialpressure.Item # Inlet Aux. Inlet Outlet CapacityTLGLF3C* 3” flange 2” FNPT 2” FNPT 100 GPMTLGLF4B 4” flange 3” FNPT Dual 2” FNPT 379 GPMHydraulic Drive SystemHydraulic systems eliminate theneed for drive lines, jackshaftsand U-Joints, which requirefrequent maintenance andare a potential safety hazard.The HydraFLOW hydraulic cooleris designed to hydrolically driveall 3" & 4" propane/anhydrousammonia pumps and comeswith unique features that arean industry-first: Internal breather prevents water from entering thetank; top filter access allows for easy change out; downward facingfan results in quieter operation. The scope of supply for a typicalsystem includes all equipment required for off-loading including thePTO, hydraulic pump, hydraulic motor, HydraFLOW hydraulic coolerand hydraulic fittings.- 174 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

BLACKMER PUMPSBLACKMER PUMPS (CONTINUED)Pump SpecificationsPumpModelMaximumSpeedLGL154, LGL156 & LGL158 High Differential Pressure PumpsDesigned for the toughest LPG applications:• Single and dual hose auto fuel dispensers• Aerosol filling• Vaporizer feed• Underground tank applications• Aboveground tank applications• Other high differential pressure liquefied gas applicationsGPM (L/min)HP (kW)MaximumDifferentialPressureRecommendedBypass Valve SettingRelief Valve SettingMaximum WorkingPressureLGL154 1,750 11.2 (42.4) 3 (2.2) 140 PSI (9.6 bar) 140 PSI (9.6 bar) 225 PSI (15.5 bar) 425 PSI (29.3 bar)LGL156 1,750 21 (79.5) 4.9 (3.6) 160 PSI (11.0 bar) 160 PSI (11.0 bar) 225 PSI (15.5 bar) 425 PSI (29.3 bar)LGL158 1,750 32.3 (122) 5.2 (4) 200 PSI (13.8 bar) 200 PSI (13.8 bar) 225 PSI (15.5 bar) 425 PSI (29.3 bar)LGLH2LGLH2 PerformanceLGLH2 High Differential Pressure PumpsMake the best 2-inch LPG pump on the market even tougher – that is the LGLH2!Rated at 165 psi (11.4 Bar) differential pressure, the LGLH2 is perfect for use onbobtails filling LPG tanks on the top of multi-story buildings, high capacity LPGfueling or other high differential pressure applications.Performance at 150 psid (10.3 bar) differential pressureMaximum Relief Valve1750 rpm 1450 rpm 1150 rpm Differential Pressuresetting32.3 gpm / 5.2 HP 24 gpm / 4.3 HP 17.8 gpm / 3.4 HP 200 psi 220 psiMaximum WorkingPressure425 psiLGL3021ALGL3021A 3” LPG Pump for competitive replacementsThe new pump is based on Blackmer’s standard LGLD3 transfer pump. It uses the sameinternal parts (vanes, liner, seals, bearings, discs and relief valve) as the LGLD3 pump. TheLGL3021 provides similar flow rate and has the same horsepower requirements as theLGLD3. The LGL3021 was designed to provide the same foot-to-flange and flange-to-flangedimensions as competitive pumps. This allows for easy pump installation during changeovers or plant maintenance without changing piping or motor drives because the inlet anddischarge flanges are on the pump shaft centerline. A major benefit is the LGL3021 has thesame horsepower requirement as competitive pumps but provides 13% to 25% more flow,depending upon the LPG installation and application conditions. The pump is UL-Listed andapproved for use on propane, butane, butane/propane mixes and anhydrous ammonia.Pump features include the standard Blackmer design:• Ductile iron construction• Differential pressures to 150 psi• Patented Cavitation Suppression Liners• Replaceable liner and discs• Maximum pump speed: 800 RPM3021 PerformanceMaximum SpeedGPMHPMaximum DifferentialPressureRecommended BypassValve SettingRelief ValveSettingMaximum WorkingPressure800 rpm112 12.1 150 psig 125 psig 150 psi 350 psiCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 175 -

VB DRIVE COMPONENTSVB Drive ComponentsAll sheaves listed use 3V belts. RPM outputs are based on 14” pump sheave and 1750 motor RPM.3V Motor SheavesGroove BushingOutputPart Number Count Type Diameter RPM100008 3 SH 3.35” 420100010 3 SH 4.12” 520100040 3 SDS 5.30” 640100044 3 SDS 6.00” 780100070 4 SDS 4.50” 520100080 4 SDS 5.30” 640VB Bases and Belt Guards200020 15” x 30” VB base, for use in 2” and 3” units200040 Belt guard, fits 15” x 30” VB base200030 17” x 40” VB base, for use in 4” units200050 Belt guard, fits 17” x 40” VB baseLovejoy CouplingsFor use in direct mount pump/motor assembliesPart Number Body Type Shaft Size Fits300003 L090 5/8” (0.625) 56C Pumps300005 L090 7/8” (0.875) 145T Motors300010 L095 7/8” (0.875) 145T Motors300020 L095 1 1/8” (1.125) 182T/C & 184T/C Motors300030 L100 3/4” (0.750) 215C Pumps300040 L100 7/8” (0.875) 145T Motors300050 L100 1 1/8” (1.125) 182T/C & 184T/C Motors300055 L100 1 3/8” (1.375) 213T/C & 215T/C MotorsLovejoy Spiders300060 L090 & L095 Spider300070 L100 SpiderDirect Mount Accessories200011 Direct mount base – 12” x 24” – For mounting 1” – 1 ½”Pumps200025 Direct mount base – 15” x 30” – For mounting LGL156 Pumps200060 Coupling guard – safety cover for covering Lovejoy junction3V Pump SheavesPart NumberGrooveCountBushingType Diameter100050 3 SK 14”100055 3 SF 19”100100 4 SK 14”Sheave BushingsPart NumberBushingType Shaft Size100168 SH 1 1/8” (1.125)100170 SH 1 3/8” (1.375)100175 SH 1 5/8” (1.625)100110 SDS 1 1/8” (1.125)100120 SDS 1 3/8” (1.375)100150 SDS 1 5/8” (1.625)100155 SDS 1 7/8” (1.875)100180 SK 1 1/8” (1.125)100190 SK 1 1/4” (1.250)100195 SK 1 5/8” (1.625)3V BeltsPart Number Belt Length100200 60”100203 63”100205 67”100210 71”100220 85”2 Bolt Tensioning Motor BasesThese bases are used to adjust belttension in a VB drive arrangement.Part Number145A2182A2184A2213A3215A2254B2256B2284B2Frame Size145T182T184T213T215T254T256T284T- 176 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

BLACKMER BYPASS VALVESBY-PASS VALVESBLACKMER BY-PASS VALVESDifferential bypass valves are designed toprotect pumps and system componentsfrom excessive pressure damage. Weldflanges are available by special order.Pump Pressure Adjust.Item # Size Size Setting Range Cap.BV-3/4 3/4” 1 1/4”-1 1/2” 95 psi 70-100 psi 50 GPMBV-1 1” 1 1/4”-1 1/2” 95 psi 70-100 psi 50 GPMBV-1 1/4 1 1/4” 1 1/2”-2” 95 psi 70-125 psi 125 GPMBV-1 1/2 1 1/2” 2”-3” 95 psi 70-125 psi 125 GPMBV-2-30 2” 3”-4” 30 psi 20-40 psi 225 GPMBV-2-55 2” 3”-4” 55 psi 41-70 psi 225 GPMBV-2-95 2” 3”-4” 95 psi 90-125 psi 225 GPMBLACKMER BY-PASSVALVES BLACKMER ®INTRODUCESHIGH PRESSUREBV¾ & BV1BLACKMER PUMP KITSRebuild kits include maintenance kit components, as well asthe liner and rotor / shaft assembly. Kits DO NOT include reliefvalve parts.Pump Maintenance Kit Rebuild KitLGF1E & PE 898994*LGRLF1 1/4 898976* 899076LGL1 1/4 898976* 899077LGL1 1/2 898976* 899078LGL154A 899222LGL156A 899222LGL158A & B 899222LGLD2E 898979 899079**LGLD3F 898981 899081**LGL3021A 899195 899095LGLD4 898922 899022**TLGLF3C 898980 899080**TLGLF4A&B 898922 899022***Kit may also be used for 4 vane pump models**Kits are double shaftBlackmer® has now introduced theBV¾ and BV1 Bypass Valves with ahigh pressure spring option that allowsa spring range from 151 to 200 psi (10.4to 13.8 bar).The high-pressure spring option isdesigned for use with Blackmer’sLGL150 Series pumps in high-pressureapplications such as auto-gas dispenser installations.Do NOT use this option with other LPG pumps as the system couldbe over-pressurized.The new spring option is UL-listed which will allow it to be usedwith LPG dispenser installations. This option will help save packagecosts by allowing the use of the smaller bypass valves and smallerdiameter piping, which will better match pump flow rates.Lead-time for the new spring option will be the same as standardBypass Valve lead-time.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 177 -

BLACKMER PUMP PARTSBLACKMER PARTS LISTPUMP MODELS: LGF1E, LGB1E, LGF1PE, LGB1PEand Discontinued ModelsLGF1D, LGB1D, LGF1PD, LGB1PD, LGF1C, LGB1C, LGF1PC, LGB1PC(See Instructions 501-A00 for Installation, Operation and Maintenance)LOCKNUT TOOLRef.No.DescriptionPartsperPumpPart No.Ref.No.DescriptionPartsperPumpPart No.2 Adjusting Screw – Relief Valve (R/V) 1 432901 28 † Capscrews – Bearing Cover 4 9200803 Locknut – Adjusting Screw 1 922811 28A † Bracket Mounting Screws 4 9200904 Cover – R/V 1 412901 28B † Bracket Mounting Screws 4 9201014A O-Ring – Spring Guide 11 711940 28C Guard Screw 1 9200267 Spring Guide – R/V 1 422901 Coupling Half – Pump 9061508 Spring – R/V 1 472901 Coupling Half – Motor (56C) 9061519 Valve – R/V 1 45290134 Coupling Half – Motor1(143-145TC/184C)9061479A Disc – R/V 1 442901Coupling Spider90615510 O-Ring – R/V Cover 11 701965 35 Key – Shaft 11 90912612 † Cylinder – LGF1, LGB1 022914 72 O-Ring – Head 17119411Cylinder – LGF1P, LGB1P022915 73 Gage Plug (1/4”) 2 90819813Rotor & Shaft Assembly, Six Vane 273A † Plug (3/4”), External Bypass 1 9082251 262907(Includes Ref. Nos. 24A & 24B)76 Grease Fitting 2 31781514 Vane – Duravane (Std.) 3 4, 61 092913 76A Grease Relief Fitting 2 70199220 † Head 1 032905 104 Grease Seal 11 33193421 Capscrews – Head 4 920178 Bracket - (base mount) - LGB1(P)D 83291324 Ball Bearing 21081903405Bracket (C-faced footless) - LGF1(P)D83291224A Locknut – Bearing 2 903531 108A Capscrews – Bracket 4 92033124B Lockwasher – Bearing 21 903532 108B Bracket (C-faced footed) SEE PAGE 226 † Gasket – Bearing Cover 11 383075 186 Guard 1 80412027 † Bearing Cover 1 043071 Tool - Locknut 903090Kit – Maintenance (4-Vane) 898916Kit – Maintenance (6-Vane) 8989941 Included in Maintenance Kit.2 Discontinued 'D' and 'C' models shipped with a 4-vane rotor. The current 6-vane rotor is fully interchangeable aslong as the slotted vanes (pn 092913) are used. 3 The current slotted vanes (pn 092913) may be used in either the 6-vane or 4-vane rotors.The discontinued solid vanes may be used in the 4-vane rotors ONLY. Always install the vanes with the slot facing the direction of rotation.† To fit the LGB1(P)C, LGF1(P)C use: Ref. No. 12-022902/022911 respectively, Ref. No. 20-032902, Ref. No. 26-382901, Ref. No. 27-042901,Ref. No. 28-920203, Ref. No. 28A & B-920230, Ref. No. 73A-908198, and Ref. No.108-832901/832905 respectively.Keep this parts list with Installation, Operation and Maintenance Instructions.- 178 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

BLACKMER PUMP PARTSPUMP MODELS: LGF1E, LGB1E, LGF1PE, LGB1PE (CONTINUED)Ref.No.MECHANICAL SEALPart NamePartsPerPumpPart No.153 Mechanical Seal Assembly 2 332920153A** Jacket Assembly – Seal 2 332922153B** Stationary Seat (Steel) 2 332901153D O-Ring – Stationary Seat (Buna-N) 2 711916153F** Seal Face (Carbon) 2 332902153G O-ring – Rotating (Buna-N) 2 7119391 Included in Maintenance Kit ** Ref. Nos. 153A, 153B & 153Fare not available as separate repair parts.Ref.No.MOUNTING BRACKETPart NamePartsPerPumpPart No.108B Bracket (C-faced footed) – LGF1(P)D 1 833000CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 179 -

BLACKMER PUMP PARTSBLACKMER PARTS LISTPUMP MODELS: LGRL1.25, LGRLF1.25A, LGL1.25,LGLF1.25A, LGL1.5, LGLF1.5Aand discontinued models: LGRLF1.25, LGLF1.25See Instructions 501-B00 for Installation, Operation and MaintenanceLOCKNUT TOOLRef.No.DescriptionPartsperPumpPart No.Ref.No.4-Vane Rotor 7DescriptionPartsperPumpPart No.1 Cap – Relief Valve (R/V) 1 413200 27A Bearing Cover – Outboard 1 0430712 Adjusting Screw – R/V 1 433909 28 Capscrews – Bearing Cover 4 4 - 8 9200803 Locknut – Adjusting Screw 1 922923 35 Shaft Key 11 9091254 Cover – R/V 1 413076 41 Liner – LGRL(F)1.25 [8 - Vane Only] 12 1830197 Spring Guide – R/V 1 423955 Liner – LGL(F)1.25 [8 - Vane Only]2 1830208 Spring – R/V (81 – 125 psi) 1 471428 Liner – LGL(F)1.5 [8 - Vane Only]2 1833109 Valve - R/V 1 453077 71 Disc 21 06307510 O-Ring – R/V Cover 11 711924 72 O-Ring – Head 21 70191812 Casing with feet (1.25) 1 013075 73 Gage Plug (1/4”) 1 908198Casing with feet (1.5) 013376 73A Gage Plug (3/4”) 16 90822513 Rotor & Shaft Assembly, Eight 12 262300 74 Setscrew – Liner 1 922088Vane (with Ref. Nos. 24A & 24B) 76 Grease Fitting 2 31781514 Vane – Duravane 81 093088 76A Grease Relief Fitting 2 70199220 Head 2 033073 88 O-Ring – R/V Cap 11 70194921 Capscrews – Head 16 920276 104 Grease Seal 11 33192724 Ball Bearing 21 903114 — Tool - Locknut — 90309024A Locknut – Bearing 22 903534 — Kit - Maintenance [8 Vane] — 89897624B Lockwasher – Bearing 21 903533 — Kit - Rebuild LGRL(F)1.25(A) [8 Vane] — 89907626 Gasket - Bearing Cover 3 1-21 383075 — Kit - Rebuild LGL(F)1.25(A) [8 Vane] — 89907727 Bearing Cover – Inboard 5 0-1 043070 — Kit - Rebuild LGL(F)1.5(A) [8 Vane] — 8990781 Included in Maintenance Kits and Rebuild Kits2 Included in Rebuild Kits.3, 4, 5 Applies to LG(R)LF pump models only:3 Use one outboard4 Use four outboard6 Ref. No. 73A: Older pumps may use a 1/4” plug (pn 908198) or 1/2” plug (pn 908215).7 See opposite side re parts for older pumps fitted with a 4-vane rotor.Note: Earlier model pumps used taper pins, which are no longer required.Keep this parts list with Installation, Operation and Maintenance Instructions.5 Use none.- 180 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

BLACKMER PUMP PARTSPUMP MODELS LGR1.25, LGRLF1.25A, LGL1.25, LGLF1.25A, LGL1.5, LGLF1.5A (CONTINUED)FLANGE ‘F’ MOUNTINGRef. No.DescriptionPartsper Part No.Pump12ACasing without Feet – LG(R)LF1.25 0130771Casing without Feet – LGLF1.501337726 Gasket - Bearing Cover 1 38307528A Bracket Mounting Screws 4 92010128C Guard Screw 1 920026Coupling Half – Pump 906147Coupling Spider 906155Coupling Half – Motor (56C) 90615134 Coupling Half – Motor1(143TC,145TC,184C)906147Coupling Half – Motor(182TC,184TC,215C)90614656 Capscrews – Adapter Ring Mounting 4 92048076 Grease Fitting 1 31781576A Grease Relief Fitting 1 70199286Motor Adapter Ring-182TC,184TC,215C1 832914104 Grease Seal 1 331927108 6 Mounting BracketIncludes Ref. Nos. 76 & 76A1 832912108B Capscrews - Bracket 4 920331186 Guard 1 8041206 Use (P/N 833000 – Mounting Bracket w/ feet) ondiscontinued models LG(R)LF1.25 and LGLF1.5MECHANICAL SEALRef.No.Part NamePartsPerPumpPart No.153 Mechanical Seal Assembly 21 333045153A Stationary Seat ( Hardened Steel ) 2 **153B Seal Face ( Carbon ) 2 **153C Jacket Assembly 2 **153D O-Ring – Stationary (Buna-N) 2 711916153E O-Ring – Rotating (Buna-N) 2 7119151 Included in Maintenance Kits and Rebuild Kits** NOTE: Mechanical Seal Ref. No. 153 is only sold as a complete assembly.Ref. Nos. 153A, 153B & 153C are not available asseparate replacement parts.4-VANE ROTOR/SHAFT PARTSRef.No.Part NamePartsPerPumpPart No. Part Name Part No.13A Rotor & Shaft Assembly, Four Vane 12 263076 Kit – Maint LGRL(F)1.25A [4 Vane] 898917(Includes Ref. Nos. 24A & 24B) Kit - Maint LGL(F)1.25(A) [4 Vane] 89891814 Vane – Duravane 41 093088 Kit - Maint LGL(F)1.5(A) [4 Vane] 898919Liner – LGRL(F)1.25 [4 - Vane Only]2 183003 Kit - Rebuild LGRL(F)1.25A [4 Vane] 89901741A Liner – LGL(F)1.25 [4 - Vane Only] 12 183004 Kit - Rebuild LGL(F)1.25(A) [4 Vane] 899018Liner – LGL(F)1.5 [4 - Vane Only]2 183301 Kit - Rebuild LGL(F)1.5(A) [4 Vane] 899019Push Rod – LGRL(F)1.251 12300477 Push Rod – LGL(F)1.25 21 123076Push Rod LGL(F)1.51 123401CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 181 -

BLACKMER PUMP PARTSBLACKMER PARTS LIST960438Page 1 of 2PARTS LIST501-K01PUMP MODELS: LGL154A, LGL156A, LGL158B Section 501and Discontinued LGL158A Effective Mar 2012Keep with Installation, Operation and Maintenance Instructions 501-K00 Replaces Mar 2011Ref.No.DescriptionPartsPerPumpPart No.Ref.No.DescriptionPartsPerPumpPart No.4 Cover - Relief Valve (R/V) 1 415701 35 Key – Shaft (for shaft 265702) 11 9091535 Capscrews - R/V Cover 4 920122 Key – Shaft (for older shaft 265701)1 9091528 Spring - R/V (225 psi) 1 471400 41 Liner (LGL158) 1 1857019 Valve - R/V 1 455701 Liner (LGL156) 18571010 O-Ring - R/V Cover 11 711924 Liner (LGL154) 18571112 Casing 1 015701 71 Disc 21 06570113 Rotor & Shaft Asy. 1 265702 72 O-Ring - Head 21 702169Rotor & Shaft Asy. (LGL158A only) 2 2 265701 73 Gage Plug 2 90819814 Vane - Duravane 81 094860 74 Key - Liner 1 90917720 Head Inboard 1 035701 76 Grease Fitting 2 31781521 Capscrews - Head 12 920468 76A Grease Relief Fitting 2 70199223 Head Outboard 1 035703 104 Grease Seal - Outer 11 33192124 Ball Bearing 21 903148 104A Grease Seal - Inner 21 33570224C Bearing Spring 11 903187 159 Seal Spacer Ring 2 37570126 Shim Kit (6 ea: .002”, .005” & .010” ) Varies 1 905172 — Kit – Maintenance — 89922227 Bearing Cover 1 045701 — Priming Valve — 45575028 Capscrews - Bearing Cover 4 920122 (for Underground Tank Installations)1 Included in Maintenance Kit.2 The 265702 will fit the LGL158A, but will require baseplate modifications as it is 1.41” longer than the 265701 shaft.For complete rebuild kit, use maintenence kit no. 89922 as well as key no.'s 8, 9, 13, 41- 182 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

BLACKMER PUMP PARTSMECHANICAL SEAL – LPGRef. No.Part NamePartsPer Part No.Pump153 Mechanical Seal Assembly - SNCN 21 335703153A Stationary Seat (Steel) 2 **153B Seal Face (Carbon) 2 **153C Jacket Assembly 2 **153D O-Ring - Stationary (Buna-N) 2 701934153E O-Ring Rotating (Buna-N) 2 7119171 Included in Maintenance Kit and Rebuild Kit** NOTE: Mechanical Seal Ref. No. 153 is only sold as a completeassembly. Ref. Nos. 153A, 153B & 153C are not availableas separate replacement parts.C-FACE MOTOR ADAPTOR BRACKETRef.No.DescriptionPartsperPumpPart No.28A Bracket Mounting Screws 4 92010228B Lockwasher 4 90960228C Guard Screw 1 92002634 Coupling Half – Pump 1 906033Coupling Spider 906034Coupling Half – Motor182TC,184TC,215C 906164213TC,215TC 906032108 Mounting Bracket 1 833003108B Capscrew – Bracket to Motor 4 098116108C Lockwasher 4 909706186 Guard 1 804120ANSI Flange Kit Part Number 655701 with:Part NamePartsPerPumpPart NameFlange, 1.5" NPS, ANSI 300# RF Threaded 1 Flange, 2" NPS, ANSI 300# RF Threaded 1Gasket 1.5”, 600# 1 Gasket 2”, 600# 1Stud 3/4-10 x 3 3/4 4 Stud 5/8-11 x 3 1/2 8Heavy Hex Nut 3/4-10 4 Heavy Hex Nut 5/8-11 8PartsPerPumpCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-92931809 Century Avenue, Grand Rapids, Michigan 49503-1530, U.S.A.Telephone: (616) 241-1611 / Fax: (616) 241-3752 Parts List 501-K01E-Mail: blackmer@blackmer.com / Internet: www.blackmer.com Page 2 of 2- 183 -

BLACKMER PUMP PARTSBLACKMER PARTS LIST960440Page 1 of 2PARTS LIST501-L01PUMP MODEL: LGL3021A Section 501Effective Jan 2012Keep with 501-L00 Installation, Operation and Maintenance Instructions Replaces NewLOCKNUT TOOLPartsRef.DescriptionPer Part No.DescriptionNo.Pump4 Cover - Relief Valve (R/V) 1 415115 41 Liner 1Ref.No.PartsPerPumpPart No.2 1851115 Capscrews - R/V Cover 4 920379 42 Flange – NPT 3” 2 6551328 Spring - R/V 11 475135 Flange – NPT 4” 6551339 Valve - R/V 1 455129 42A O-Ring – 3” Flange 21 71224510 O-Ring - R/V Cover 11 711941 O-Ring – 4” Flange1 79412612 Casing 1 015131 42B Capscrew - NPT Flange 8 92037913A Rotor & Shaft Asy. 12 265190 71 Disc 21 065112(Includes Ref. Nos. 24A & 24B) 72 O-Ring - Head 21 70204114 Vane - Duravane 61 095131 73 Gage Plug 2 90819820 Head 2 035128 74 Key – Liner 12 18519121 Capscrews - Head 40 920379 76 Grease Fitting 2 31781524 Ball Bearing 21 903166 76A Grease Relief Fitting 2 70199224A Locknut - Bearing 22 903523 77 Push Rod 31 12511024B Lockwasher - Bearing 21 903524 104 Grease Seal 21 33190826 Gasket - Bearing Cover 21 385125 186 Shaft Protector 1 34180127 Bearing Cover 2 041815 — Tool – Locknut — 90309128 Capscrews - Bearing Cover 12 920285 — Kit – Maintenance — 89919535 Key – Shaft, 1/4" Square 11 909209 — Kit – Rebuild — 8990951 Included in Maintenance Kit and Rebuild Kit2 Included in Rebuild Kit- 184 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

BLACKMER PUMP PARTSMECHANICAL SEAL – LPGRef. No.Part NamePartsPer Part No.Pump153 Mechanical Seal Assembly - SNCN 21 335703153A Stationary Seat (Steel) 2 **153B Seal Face (Carbon) 2 **153C Jacket Assembly 2 **153D O-Ring - Stationary (Buna-N) 2 701934153E O-Ring Rotating (Buna-N) 2 7119171 Included in Maintenance Kit and Rebuild Kit** NOTE: Mechanical Seal Ref. No. 153 is only sold as a completeassembly. Ref. Nos. 153A, 153B & 153C are not availableas separate replacement parts.C-FACE MOTOR ADAPTOR BRACKETRef.No.DescriptionPartsperPumpPart No.28A Bracket Mounting Screws 4 92010228B Lockwasher 4 90960228C Guard Screw 1 92002634 Coupling Half – Pump 1 906033Coupling Spider 906034Coupling Half – Motor182TC,184TC,215C 906164213TC,215TC 906032108 Mounting Bracket 1 833003108B Capscrew – Bracket to Motor 4 098116108C Lockwasher 4 909706186 Guard 1 804120ANSI Flange Kit Part Number 655701 with:Part NamePartsPerPumpPart NameFlange, 1.5" NPS, ANSI 300# RF Threaded 1 Flange, 2" NPS, ANSI 300# RF Threaded 1Gasket 1.5”, 600# 1 Gasket 2”, 600# 1Stud 3/4-10 x 3 3/4 4 Stud 5/8-11 x 3 1/2 8Heavy Hex Nut 3/4-10 4 Heavy Hex Nut 5/8-11 8PartsPerPumpCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-92931809 Century Avenue, Grand Rapids, Michigan 49503-1530, U.S.A.Telephone: (616) 241-1611 / Fax: (616) 241-3752 Parts List 501-K01E-Mail: blackmer@blackmer.com / Internet: www.blackmer.com Page 2 of 2- 185 -

BLACKMER PUMP PARTS- 186 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

BLACKMER PUMP PARTSCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 187 -

BLACKMER PUMP PARTSBLACKMER PARTS LISTPUMP MODELS: LGLD4A, LGL4ADISCONTINUED MODELS: LGL4, LGLD4(See Instructions 501-E00 for Installation, Operation and Maintenance)LOCKNUT TOOL`Ref.No.DescriptionPartsPerPumpPart No.Ref.No.DescriptionPartsPerPumpPart No.1 Cap - Relief Valve (R/V) 1 413952 28 Capscrews - Bearing Cover 12 9202862 Adjusting Screw - R/V 1 NOTE 3 35 Key – Shaft11 9091833 Locknut - Adjusting Screw 1 NOTE 3 41 Liner12 1820004 Cover - R/V1 412001Flange - 3" NPT6520125 Capscrew - R/V Cover4 920663 42 Flange - 3" Weld1 - 2 6520077 Spring Guide - R/V1 426355Flange - 4" Weld6520058 Spring - R/V1 NOTE 3 42A O-Ring - NPT, Weld Flange 21 7019379 Valve - R/V1 452001Capscrew - NPT Flange92066310 O-Ring - R/V Cover142B8701946Capscrew - Weld Flange92064012Casing1 NOTE 3 71 Disc21 06203913Rotor & Shaft Asy, Dbl. End - LGLD4(A)71A Machine Screw - Disc 8920015262024(Includes Ref. No. 24A & 24B)71B* Lockwasher - Machine Screw 89096341Rotor & Shaft Asy, Sgl. End - LGL4(A)72 O-Ring - Head2702039262023(Includes Ref. No. 24A & 24B)73 Gage Plug2 90819814 Vane - Duravane (Std.) 61092019 74 Key - Liner12 18204020 Head2 032039 76 Grease Fitting2 31781521 Capscrews - Head36 920532 76A Grease Relief Fitting2 70199224 Ball Bearing21903172 77 Push Rod31 12200524A Locknut – Bearing22903541 88 O-Ring - R/V Cap11 70192624B Lockwasher – Bearing 2903542 Grease Seal – LGLD4(A) 226 Gasket - Bearing Cover 2104385125Grease Seal – LGL4(A) 11 33190827Bearing Cover – LGLD4(A) 2 186 Shaft Protector (LGLD4 Only) 1 341801041815Bearing Cover – Inboard, LGL4(A) 1Tool - Locknut90309227A Bearing Cover – Outboard, LGL4( A) 1 041817Kit - Maintenance898922Kit - Rebuild8990221 Included in Maintenance Kit and Rebuild KitKeep this parts list with Installation, Operation and Maintenance Instructions.2 Included in Rebuild Kit Note 3 – See Table on other side for proper parts.- 188 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

BLACKMER PUMP PARTSPUMP MODELS: LGLD4A, LGL4A, LGL4, LGLD4 (CONTINUED)MECHANICAL SEAL - STANDARDRef.Part NameNo.PartsPerPumpPart No.153 Mechanical Seal Assembly 21 332050153A Stationary Seat (Hardened Steel) 2 **153B Seal Face (Carbon) 2 **153CJacket Assembly2 **153D O-Ring - Stationary (Buna-N) 2 701934153E O-Ring - Rotating (Buna-N) 2 7119121 Included in Maintenance Kit and Rebuild Kit** NOTE: Mechanical Seal Ref. No. 153 is only sold as a complete assembly.Ref. Nos. 153A, 153B & 153C are not available as separate replacement parts.Use the table below to determine the proper parts for each model.Ref. Part NameParts PerNoPump2 Adjusting Screw - R/V13 Locknut - Adjusting Screw18 Spring - R/V112 Casing1LGLD4A and LGL4APart No.436310432039472039012009Discontinued LGLD4 and LGL4Part No.436307436355476305012000Use Dimension ‘A’ as shown in the drawing to determine the pump model number.The pump model number will also be shown on the nameplate.ModelDim ‘A’LGLD4A, LGL4A 2.19 in. 5.56 cm.LGLD4, LGL4 1.75 in. 4.45 cm.REF.NO.SeeBelowHYDRAULIC MOTOR ADAPTER PARTSPART NAMEHydraulic Motor Adapter KitPARTSPERPUMP* SeeBelowPARTNO.89203726A Gasket – Hydraulic Motor Adapter 1 38181728A Capscrew –Hydraulic Motor Adapter / Head6 92036934Coupling w/ Setscrew –1.25” straight key hyd. motor shaft1 90697035 Key – Coupling1 90918476 Grease Fitting1 31781576A Grease Relief Fitting 1 701992135Hydraulic Motor Adapter –SAE A Flange1 041829135A Capscrew – Adapter / Motor 2 920510* Hydraulic Motor Adapter Kits shipped prior to Spring 2002 were a twopiece design – refer to page 206-C00.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 189 -

BLACKMER PUMP PARTSBLACKMER PARTS LISTPUMP MODEL: TLGLF3CSee Instructions 501-D00 for Installation, Operation and MaintenanceLOCKNUT TOOLRef.No.DescriptionPartsPerPumpPart No.Ref.No.DescriptionPartsPerPumpPart No.4 Cover - Relief Valve (R/V) 1 415108 O-Ring – Flange 2 1/2” x 2 3/4” 270191942A5 Capscrew - R/V Cover 6 920331 O-Ring – Flange 2 5/8” x 2 7/8” 2 1,3 7020048 Spring - R/V 14 471428 42B Capscrew - Flange, Flanged Elbow 8 9204919 Valve - R/V 14 451417 71 Disc 21 06512110 O-Ring - R/V Cover 11 701919 72 O-Ring - Head 21 71192312 Casing 1 015128 73 Gage Plug 2 90819813 Rotor & Shaft Assembly 5 12 265147 74 Key - Liner 12 18519314 Vane - Duravane 61 095132 76 Grease Fitting 2 31781520 Head 2 035132 76A Grease Relief Fitting 2 70199221 Capscrews - Head 36 920351 77 Push Rod 31 12160724 Ball Bearing 21 903156 104 Grease Seal 21 33191824A Locknut - Bearing 22 903521 123 Dirt Shield 21 70148024B Lockwasher - Bearing 21 903522 186 Shaft Protector 1 34160126 Gasket - Bearing Cover 21 383940 — Tool - Locknut 90309127 Bearing Cover 2 041431 — Kit – Maintenance — 89898028 Capscrews - Bearing Cover 8 920285 — Kit – Maintenance with R/V — 89922535 Key - Shaft 11 909130 — Kit – Rebuild — 89908041 Liner 12 185101 — Kit – Rebuild with R/V — 899125Flange - 2" NPT 65201042 Flange - 2" Weld 1-2 652024Flanged Elbow - 2" NPT 655100Flanged Elbow - 2" Weld 655109Keep this parts list with Installation, Operation and Maintenance Instructions.1 Included in Maintenance Kit and Rebuild Kit2 Included in Rebuild Kit3 Larger O-Ring introduced October 20024 Additional parts Included in Kits with R/V5 Includes Ref. No. 24A & 24B- 190 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

BLACKMER PUMP PARTSPUMP MODEL: TLGLF3C (CONTINUED)CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 191 -

BLACKMER PUMP PARTSBLACKMER PARTS LISTPUMP MODEL: TLGLF4B*These parts also repair the TLGLF4A(See Instructions 501-E00 for Installation, Operation and Maintenance)Ref.No.DescriptionPartsPerPumpPart No.Ref.No.DescriptionPartsPerPumpPart No.1 Cap - Relief Valve (R/V) 1 413952 42A O-Ring - Flange 1 7019372 Adjusting Screw - R/V 1 436310 42B Capscrew - 3" NPT Flange 4 9206633 Locknut - Adjusting Screw 1 432039 Capscrew - 3", 4" 9206404 Cover - R/V1 412001Weld Flange; Blank Flange5 Capscrews - R/V Cover 4 920663 TWIN DISCHARGE PORT OPTIONS7 Spring Guide - R/V 1 426355 43 Flange - 2" NPT 2 6520108 Spring - R/V1 472039Flange - 2" Weld6520249 Valve - R/V1 452001 43A O-Ring - 2" NPT Flange 0 - 21 70191910 O-Ring - R/V Cover 11 701946 O-Ring - 2" Weld Flange 0 - 21 70200412 Casing1 012041 43B Capscrew - Discharge Flange 8 92049113 Rotor & Shaft Asy. 12262041 71 Disc21 062039(includes Ref. No. 24A & 24B) 71A Machine Screw - Disc 82 92001514 Vane - Duravane (Std.) 61 092019 71B Lockwasher - Machine Screw 82 90963420 Head2 032041 72 O-Ring - Head21 70203921 Capscrews - Head28 920532 73 Gage Plug2 90819824 Ball Bearing21903166 74 Key - Liner12 18204024A Locknut - Bearing 22 903541 76 Grease Fitting 2 31781524B Lockwasher - Bearing 21 903542 76A Grease Relief Fitting 2 70199226 Gasket - Bearing Cover 21385125 77 Push Rod31 12200927 Bearing Cover 2 041815 88 O-Ring - R/V Cap 11 70192628 Capscrews - Bearing Cover 12 920286 104 Grease Seal21 33190835 Key - Shaft11 909183 186 Shaft, Protector 1 34180141 Liner12 182000 Tool - Locknut 903092AUXILIARY INTAKE OPTIONS Kit – Maintenance 89892242 Flange - 3" NPT1 652012Kit – Rebuild899022Flange - 4" Weld 652005Flange - 3" Weld 652007Flange - Blank 6520001 Included in Maintenance Kit and Rebuild Kit2 Included in Rebuild KitKeep this parts list with Installation, Operation andMaintenance InstructionsLOCKNUTTOOL- 192 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

BLACKMER PUMP PARTSPUMP MODEL : TLGLF4B (CONTINUED)MECHANICAL SEALRef.Parts PerPart NameNo.PumpPart No.153 Mechanical Seal Assembly 21 332050153A Stationary Seat (Hardened Steel) 2 **153B Seal Face (Carbon) 2 **153C Jacket Assembly2 **153D O-Ring - Stationary (Buna-N) 2 701934153E O-Ring - Rotating (Buna-N) 2 7119121 Included in Maintenance Kit and Rebuild Kit** NOTE: Mechanical Seal Assy. (Ref. 153) is only sold as a complete assembly.Ref. Nos. 153A, 153B & 153C are not available as separate replacement parts.TLGLF4TLGLF4APart NameInterchangeability status w/TLGLF4A Interchangeability status w/TLGLF4PART NO.PART NO.Push Rods1220051122005Liner1820002182000Rotor & Shaft 2620412262041Bearing Locknut 9035232903541Bearing Lockwasher 90352419035421 Included in Maintenance Kit and Rebuild Kit2 Included in Rebuild KitReference:a = Interchangeable, but requires new Bearing Locknuts PN 903541 and Bearing Lockwasher PN 903542.These are included whe ordering Rotor & Shaft PN 262024.b = Interchangeable but requires new push rods PN 122005.c = Not InterchangeableTLGLF4BPART NO.122009182000262041903541903542OPTIONAL HYDRAULIC MOTOR ADAPTER PARTSPartsRef.Part NamePer Part No.No.PumpSeeBelowHydraulic Motor Adapter Kit* SeeBelow89203726A Gasket – Hydraulic Motor Adapter 1 38181728ACapscrew –Hydraulic Motor Adapter / Head6 92036934Coupling w/ Setscrew –1.25” straight key hyd. motor shaft1 90697035 Key – Coupling1 90918476 Grease Fitting1 31781576A Grease Relief Fitting 1 701992135Hydraulic Motor Adapter –SAE A Flange1 041829135A Capscrew – Adapter / Motor 2 920510* Hydraulic Motor Adapter Kits shipped prior to Spring 2002 were of a twopiece design – refer to page 206-C00.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 193 -

COMPRESSORS & MOTOR STARTERSCOMPRESSORSMOTORS/STARTERS/SWITCHESBLACKMER OIL-FREECOMPRESSORSBlackmer offers a variety of factoryassembled compressor packages to fitmost application requirements. Standardbase mounted units are available in avariety of styles.KECF212EXPLOSION PROOFFLEXIBLE CONNECTORFor connecting wiring to motor ona pump unit so motor can be adjusted3/4” x 12”Item # Approx. Liquid Transfer Rate Motor SizeLB161 90 GPM @ 780 RPM 7.5 HPLB361 194 GPM @ 780 RPM 15 HPLB601 351 GPM @ 790 RPM 25 HPLB942 640 GPM @ 750 RPM 40 HPPORTABLE LIQUIDTRANSFER, VAPORRECOVERY SYSTEMS FROMBLACKMERCustom skid mounted compressor unitsoffer flexibility for transferring liquids inremote locations or emergency situations.These units are customized to fit yourspecific needs.*Uses 30 wt non-detergent oilB800H-2HA7REMOTE PUSH BUTTONSTATIONProvides remote operation of magneticstartersClass 1, Group D (60 Cycle) NEMA Type3R, 7 and 9KXS52C OFF/ON SWITCHFor use with 1 and 1-1/2 HP explosionproof motors.Class 1, Group D (60 Cycle) NEMAType 3R, 7 and 9KRUG VAPOR COMPRESSORS• Has LP Gas fueled engine (uses LPbeing transferred as fuel)• 20 GPM transfer rate• 1/2” FNPT connectionsItem #DescriptionK-VP-HK Connecting hose kitK-VP-HK-100 100' Krng Hose KitK-VP-HK-50 50' Krng Hose KitK25459B Replacement CompressorK488-25274 Krug compressor seal kitK209870 3/4” replacement clutchK3X927 Replacement pulleyK-VP-LPH Compressor with Hondagas engine*Uses 30 wt non-detergent oilK1222Toggle switch only for KXS52C.KRUG HAND PUMPOperates on the simple principle of theautomotive piston. Used for filling 20#cylinders, lift truck cylinders, etc.Inlet: 1” FNPTOutlet: 3/4” FNPTCapacity: 6 GPM at 40 strokes/min.Item #KHPK-HP-HKDescriptionHand pumpConnecting hose kit- 194 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

MOTOR STARTER SELECTIONMotor Starter Selection GuideThe following guide will help in selecting the proper starter for your motor. The starter and heater pairingslisted here are based on our stock motors. If you have a motor from a different source, please verify theFull Load Amperage (FLA) for the motor listed for the voltage you are using. If this value matches themotors we provide, then the same starter and heaters can be used. If not, please see the heater tablespecified for the desired starter, and find the proper heater based on the FLA of your motor.Explosion Proof MotorsWiring Diagram for AXPD010C1M and AXPD015C1M motorsClass I, Group D – 60 HZ – 1750 RP* FLA = Full Load AmperagePart Number HP Phase VoltageFLA230VFLA460VFrameSizeFrameTypeAXP020T3B 2 3 230/460 6.2 3 145T RigidAXP030T3B 3 3 230/460 9 4.2 182T RigidAXP030C3B 3 3 230/460 9 4.2 184C C FaceAXP050T3B 5 3 230/460 13 6.5 184T RigidAXP050C3B 5 3 230/460 13 6.5 215C C FaceAXP075T3B 7.5 3 230/460 20 10 213T RigidAXP100T3B 10 3 230/460 26 13 215T RigidAXP150T3B 15 3 230/460 39 19.5 254T RigidAXP200T3B 20 3 230/460 50 25 256T RigidAXP250T3B 25 3 230/460 62 31 284T RigidPart Number HP Phase VoltageFLA115VFLA230VFrameSizeFrameTypeAXPD010C1M* 1 1 115/208/230 13 6.5 56C C FaceAXPD015C1M* 1.5 1 115/208/230 16 8 56C C FaceAXPB02T1B 2 1 115/230 22 11 184T Rigid929306 2 1 115/230 22 11 184C C FaceAXPB03T1B 3 1 115/230 30 15 215T RigidAXP05T1B 5 1 230 ----- 21 215T Rigid929943 5 1 208/230 ----- 21 215C C Face*These motors are equipped with internal overload circuits, and do not require a starterCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 195 -

MOTOR STARTER SELECTION3 Phase Motor Starter SelectionSTARTERS – 3 PHASEAll starters are Type R, 7, & 9 – Class I C & D – Class II E, F, & G – Division 1 & 23 Phase starters require 3 overload heater units for operation.Magnetic Starters – B509 SeriesHP 230 Volt Operation 460 Volt OperationNEMA Size Model Heater NEMA Size Model Heater2 0 B509-AHA-1 W47 0 B509-AHB-1 W393 0 B509-AHA-1 W51 0 B509-AHB-1 W435 1 B509-BHA-1 W55 0 B509-AHB-1 W477.5 1 B509-BHA-1 W61 1 B509-BHB-1 W5210 2 B509-CHA-1 W63 1 B509-BHB-1 W5515 2 B509-CHA-1 W67 2 B509-CHB-1 W5920 3 B509-DHA-1 W69 2 B509-CHB-1 W6225 3 B509-DHA-1 W72 2 B509-CHB-1 W65B509 SeriesAll starters are Type R, 7, & 9 – Class I C & D – Class II E, F, & G – Division 1 & 23 Phase starters require 3 overload heater units for operation.B609 SeriesManual Starters – B609 SeriesHP 230 Volt Operation 460 Volt OperationNEMA Size Model Heater NEMA Size Model Heater2 0 B609-AHW W46 0 B609-AHW W383 0 B609-AHW W50 0 B609-AHW W425 1 B609-BHW W54 0 B609-AHW W467.5 1 B609-BHW W59 1 B609-BHW W5110 ----- ----- ----- 1 B609-BHW W5415 ----- ----- ----- ----- ----- -----20 ----- ----- ----- ----- ----- -----25 ----- ----- ----- ----- ----- ------ 196 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Single Phase Motor Starter SelectionMOTOR STARTER SELECTIONSTARTERS – SINGLE PHASEAll starters are Type R, 7, & 9 – Class I C & D – Class II E, F, & G – Division 1 & 2Single Phase starters require 1 overload heater unit for operation.Magnetic Starters – B509 SeriesHP 115 Volt Operation 230 Volt OperationNEMA Size Model Heater NEMA Size Model Heater2 1 B509-BHXD-1 W60 0 B509-AHXA-1 W523 1P B509-XHXD-1 W63 1 B509-BHXA-1 W555 ----- ----- ----- 1P B509-XHXA-1 W59B509 SeriesSTARTERS – SINGLE PHASEAll starters are Type R, 7, & 9 – Class I C & D – Class II E, F, & G – Division 1 & 2B609 SeriesSingle Phase starters require 1 overload heater unit for operation.Manual Starters – B609 SeriesHP 115 Volt Operation 230 Volt OperationNEMA Size Model Heater NEMA Size Model Heater2 1 B609-BHX W59 0 B609-AHX W513 1P B609-XHX W62 1 B609-BHX W545 ----- ----- ----- 1P B609-XHX W58CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 197 -

METERSMETERSE4000 - NEPTUNEELECTRONIC REGISTERReplace your Bobtail’s Neptune orVeeder-Root mechanical register withthis easy to use electronic register.• To install an E4000 on a 1 1/2” Neptune meter, use a 201072-0011 1/2” adaptor plate.• To install an E4000 on a LC meter, add:1000678 KitLC499988 Strainer coverLC81256 ThermowellLC06854 O-ringTM-U295-071EPSON SLIP PRINTERRL100508A1VA (NEPTUNE)90028-101 (LIQUA-TECH)1” LIQUID PROPANE METERDesigned for metering small quantities ofliquid propane into portable containersand engine fuel tanks. Complete withstrainer, vapor eliminator, & differentialvalves.Flow Range: 3 to 18 gpm.NEPTUNE E1000 REGISTERFOR DISPENSERSReplaces 90028-101 mechanicalregister.*Battery poweredVEEDER-ROOT PRINTINGREGISTERReplace your Neptune register with along lasting Veeder-Root RegisterITEM#DESCRIPTIONL789002-002 Printing RegisterL886201-001 Adaptor to fit 1 1/4” to 2” Neptune without ATCL886205-001 Adaptor to fit 1 1/4” to 2” Neptune with ATCL312020-905 10:1 Pulser - Veeder Root833-ORMREMANUFACTUREDSCHLUMBERGER/NEPTUNE833 PRINTER REGISTER1 Year or 1 Million Gallon warranty (whichevercomes first). Rebuilt 833 registers provide youwith the same quality measurement andreliability that you have grown accustom to!Totally rebuilt, reconditioned and repaintedunits. All parts are inspected and any defectwill be completely corrected.METERS (CONTINUED)METER SEALSM250TC METRIS VAPOR METERThis 3/4” meter will meter 400,000 BTUat 11” W.C. and up to 1,200,000 BTU of5 psig inlet pressure (max.). It has a directread CFU index. 3/4” connections. Largersizes are available.M250TC is Temperature Compensated c/w Direct Read Index.Choices of connection are 20-LT with 3/4" npt straight swivels or20-LT with 3/4" npt ninety degree swivels.M015664 Replacement gasket for 3/4" swivel connection.400ATC is Temperature Compensated c/w Direct Read Index.Choices of connection are 30-LT with 1 1/4" npt straight swivels or45-LT with 1 1/2" npt straight swivels.Inlet M250TC M250TC 400ATC 400ATCPressure SCFH btu p/h SCFH btu p/hNat. Gas propane Nat. Gas propane11"wc 250@7"we 968,000 400@7"wc 1,300,0002psi 660 1,040,000 930 1,475,0005psi 750 1,190,000 1,055 1,670,00010psi 950 (HP) 1,500,00 (HP) 1,255 1,990,00015psi 1,440 (HP) 2,285,000 (HP)20psi 1,620 (HP) 2,570,000 (HP)25psi 1,795 (HP) 2,840,000 (HP)PRESSURE CORRECTION FACTORSTo Compensate for over 11" wc PressureFirst multiply reading by 100 & thenPressureMultiply2 psi x 1.1135 psi x 1.31710 psi x 1.65615 psi x 1.99620 psi x 2.33525 psi x 2.675Note: This chart is a general guidelineTo convert SCFH reading to Gallons Per Hour LP divide by 36.39Item # Description163-057-510 18” Seal Wire163-057-510S 18” Seal Wire with lead sealsNEPTUNE CORIOLIS MASSFLOW LIQUID METERSFor bulk plants and bobtails. The Coriolisreduces LP Gas under-measurement,and compared to traditional mechanicalflow meters, the Coriolis offers betteraccuracy with higher flow rates over alonger service life. When combined withthe Neptune E4000 Register, the Coriolisallows an upgrade path not obtainablewith competitive electronic transactionmanagement systems. Features electronictemperature compensation and theavailability of combining with hand helds.Available in sizes from 12 - 70 GPM.- 198 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

METER PARTSNEPTUNE/LIQUA-TECH METER PARTSDESCRIPTION PART #3/4” and 1” Meter 3/4” 1”Gasket, Main Case L4861-016 L4861-016Measuring Chamber, Complete L42075-101 L42075-101Gasket, O-Ring, Vapor Release Cover L100139-012 L100139-012Strainer Assembly L100683-001 L100683-001Seal, Differential Valve, U-Cup L100025-008 L100025-008O-Ring, Inlet/Outlet, Differential Valve L100139-007 L100139-007Differential Valve Repair Kit L100028-011 L100028-0111 1/4”, 1 1/2”, and 2” Meter 1 1/4” 1 1/2” 2”Stud, Register Mounting L84435-000 L84435-000 L84435-000Gasket, Main Case L4862-008 L4862-008 L84806-000Measuring Chamber, Complete L43260-101 L83271-101 L45806-101Star Connection L82976-001 L82976-001 L82976-001Gear Train, Complete L83501-000 L84981-000 L83502-000Seal, U-Cup Shaft L100025-002 L100025-002 L100025-002Vapor Release and Strainer 1 1/2” 2”Gasket, O-Ring. Vapor Release Cover L100139-022 L100139-022Main Valve, Complete L89274-006 L89274-006Piston, Seal L83179-000 L83179-000Float, Complete L82476-001 L82476-001Strainer and Gasket Assembly L101433-704Strainer, Inner and Outer Combo L101462-003Inlet Check Valve, Complete L84983-704 L84813-702Gasket, O-Ring, Strainer Cover L100139-010 L84818-000Differential Valve 1 1/2” 2”Diaphragm L83771-002 L83771-002O-Ring L100139-001 L100139-001Gasket, Flange L82060-000 L84818-000Temperature Compensator 1 1/4” 1 1/2” 2”Gear Train, Complete L83501-000 L84981-000 L83502-000Seal, U-Cup Shaft L100025-002 L100025-002 L100025-002Adapter Unit, Complete L86602-005 L86602-005 L86602-005Stud, Regoster Mounting L84435-000 L84435-000 L84435-000Rollpin L100370-003 L100370-003 L100370-003Drive Fork L84192-006 L84192-006 L84192-006Neptune RegistersPart#600 Series Register (for 3/4” meter) 100498-009833 Printer Register 880030-000601 Series Register (for 1” meter) 100498-016CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 199 -

HANNAY REELS & PARTSHANNAY REELSSERIES PBExplosion-proof power rewind reels. Standard inlet is 90° ballbearing swivel joint with 1 1/2” female NPT threads. Reels areavailable with top or bottom mounted guide master for usewhen recovery is at an angle other than straight off the reel.HANNAY REEL PARTS ID GUIDESWIVEL JOINTS, RISERS, HUB ASSEMBLIESC2C1C41” HOSEMODEL NUMBER* CAPACITY*24-23-24 125’30-23-24 150’28-25-26 200’C7C9C12* Add Prefix EPB, EPBGMB or EPGBMTto model number to specify style reeldesired.C8C13C14C16C15EPBC17EPBGMBEPBGMTITEM PartNO. No. DESCRIPTIONC1 9927.8138 1/2” 90° MxF BP Super SwivelC2 9929.8538 1” 90° FxF BP Super SwivelC3 Specify Barco Repair Kit (Specify Size)C4 9927.8151 1/2” 90° FxF Super Swivel(FxF also Avail) 9927.8151C6 Specify Super Swivel Repair Kit (Specify Size)C7 9930.4210 1-1/2” 90° FxFxV Swivel (WHJ1590)C8 9930.0080 1-1/2” Straight FxFxV Swivel (WHJ15180)C9 9936.0642 1-1/2” PK-1 BUNA-N Packing (Merkel)C10 9930.5703 1 1/2" Straight Victaulic H-5 JointC11 9936.0659 H-5C Rope Packing Seal for H-5 JointC12 9929.0501 1" 90° Full Circle SwivelC13 9930.0531 1-1/2” 90° FxF Full-Circle SwivelC14 9901.1600 1” FIPT Iron Welded Hub Assembly(Specify Model)C15 9901.3760 1-1/2” FIPT Iron Flanged RiserC16 9965.0021 H-150G Gasket for 1-1/2” RiserC17 9901.2840 1-1/2” Hub Assy Complete(Specify Model)- 200 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

HANNAY REEL PARTS ID GUIDEBEARINGSE3E4E5HANNAY REEL PARTSHANNAY REEL PARTS ID GUIDE (CONTINUED)MOTORS, SPROCKETS, CHAINA2A3A1E6E7E8E9A7ITEM PartNO. No. DESCRIPTIONE3 9902.1200 1/2” S.A. Ball Bearing CompleteE4 9902.1300 1/2” S.A. Ball Bearing InsertE5 9902.1400 1” S.A. Ball Bearing CompleteE6 9902.1500 1” S.A. Ball Bearing InsertE7 9902.1610 1 1/2” S.A. Bronze Bearing Complete (E-coated)NotShown 9902.1620 1 1/2" S.A. Bronze Bearing Complete (304 S.S.)E8 9902.1700 1 1/2” S.A. Bronze Bearing InsertE9 9902.1730 1" S.A. Bronze Bearing InsertA8A11A4A5A12A10A6A9A13A14SWITCHES AND ELECTRICALB1B2B3B4A15A16A17B5 B6 B7B10B9B11B13B14B12ITEM PartNO. No. DESCRIPTIONB1 9917.0001 Red dot EXPB-2A Switch (12 volt)B2 9917.0014 Red Dot Internal SwitchB3 9917.0150 Cover Plunger AssemblyB4 9917.0061 Red Dot 5-Port Round Junction Box/CoverB5 9917.0062 #6 Wire Nut (For Red Dot Junction Box)B6 9917.0063 Insulated "Bug" ConnectorB7 9917.0025 12 Volt Solenoid (Diode-Suppressed)B8 specify SDLM Circuit Breaker (Specify Amperage)B9 9917.0024 CB-2 Mounting Bracket (for Cuircuit Breaker)B10 9917.0006 Push-Button 12 Volt Switch (Less Cap)B11 9917.0008 Rubber Cap (For Push Button Switch)B12 9917.0200 EPS-1 Switch (Used with Guidemaster)B13 9917.0207 EPS-2 Mounting Bracket (Used with EPS-1)B14 9917.0208 Extension Bracket for EPS-2B15 9916.0085 Rectifier for 115 Volt Exp-Proof MotorITEMNO.A1A2A3A4A5A6A7A8A9A10A11A12NotShownA13A14A15A16A17NotShownA189915.00429915.00039915.00149916.00139916.00719916.00709923.00089923.00069912.00019912.00109910.14239910.31289910.13219910.11169910.11179910.11189910.11199910.22199910.2100SpecifyDESCRIPTION12 Volt Flange Mount Non-Exp-Proof Motor12 Volt Flange Mount Explosion-Proof Motor12 Volt Base Mount Explosion-Proof MotorBrush Board Assembly (w/springs and brushes)for 12 Volt 1/2 HP MotorPair of Brushes for 12 Volt non-Exp-proofMotor (#572008)Two Pairs of Brushes for 12 Volt Explosionproof Motor (#572000)Flange Mount Motor Plate for non-Exp-ProofMotorP66A-00090 Motor Mounting Plate Right Anglefor Non-Exp-Proof Motor10’ Length #35 Chain w/Connecting LinkConnecting Link for #35 Chain138T35 Disc Sprocket, 16-5/8” Diameter (E-Coated)146T40 Disc Sprocket, 23-1/2” Diameter (E-Coated)112T35 Disc Sprocket, 13-3/8” Diameter (E-Coated)11T35 Motor Sprocket, 3/4” Long11T35 Motor Sprocket, 1-1/16” Long11T35 Motor Sprocket, 1-5/16” Long11T35 Motor Sprocket, 1-3/4” LongDisc & Sprocket for Caliper Brake (#35 Chain)Disc & Sprocket for Caliper Brake (#40 Chain)Molded Chain Guard (left or right)CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 201 -

HANNAY REEL PARTSHANNAY REEL PARTS ID GUIDE (CONTINUED)ROLLER ASSEMBLIES, CABLEGUIDES, HOSE STOPSD2D3D6D7D8D5GUIDEMASTER PARTS AND BRACKETSG1G2D9G5D10D11D12BD13G3G6D14D15D21D22G7G8D16D23D24D25A D25B D26G10G11ITEMNO.D1D2D3D4D5D6D7D8D9D10D11D12BD13D14D15D16D17D18D19D20D21D22D23D24D25AD25BD26PartNO.Specify9939.00429940.00129940.00049940.00059940.00069940.00079940.00089939.00629940.00769939.00039922.02009922.00129951.00099951.00109951.0012SpecifySpecifySpecifySpecify9940.00169940.00109940.00039940.00099940.00719940.00729939.1062DESCRIPTIONTop Wind FH-3 Mtg. Brkt. (Specify Model)FH-3 Roller & Spool Assy. (Specify Model)FH-307 Delrin-Over-Steel Step BoltFH-309 Chrome Snap CapFH-301 SpoolFH-302 BlockFH-303-15 (1.5”) Trunnion BearingFH-303-2 (2”) Trunnion BearingUtility Hose Roller Assy. “C” (Spec. Model)EH-650 Mounting Block (Plated)EH-714 Roller AssemblyHS-35 Hose Stop (Specify O.D. of Hose)HS-45 Hose Stop (Specify OD of Hose)GR-4A Guide Arm PositionerGR-4 Guide ArmGR-5 Bronze Scoop Cable Guide“R200” Series Roller Assembly“N200” Series Roller Assembly“R300” Series Roller AssemblyRoller Mounting Arm (2) per reel(For "N" Serires Spring Reels)FH-303 1 1/2" Trunnion Bearing (New Style)(No through hole)FH-305 2" SST Roller Tubing1 1/2" SST Roller TubingFH-304 Roller RodLEFT HAND roller mounting block (plated)RIGHT HAND roller mounting block (plated)Assy C2 Roller with 1 1/2 Diam. Roller(Style 2) (Specify Model)ITEM PartNO. NO.DESCRIPTIONG1 9945.0026 GM Ball Bearing (For GM-609 Roller)G2 9945.0044 GM-108 Ball Bearing (For GM-109 Roller)G3 9945.0019 GM-609 Roller w/GM BearingG5 9944.0040 GM-700 Guide Arm Body Assy w/ mtg. YokeG6 9945.0009 GM Mounting Yoke w/ Bronze BushingG7 9945.0011 GM Oil-Impregnated Bronze BushingG8 9945.1001 GM Roller body w/ Mtg. BoltsG10 9945.1005GM roller Mtg BoltsG11 9945.1003 Pinlock assy for GM 700G12 9945.1004G15 9945.0035G16 9945.0036G17 9945.0037G18 9939.0069G12GM Roller Bolt Mounting PlateGM Cross Member Assembly (3 Pieces)(Specify Model)GM Bottom-Wind Brackets (Pair)GM Top-Wind Brackets (Pair)Assy. “B” Roller for Bottom-WindGuidemaster Reels(Specify Model)- 202 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

HANNAY REEL PARTSREWIND ASSEMBLIES, BRAKES, RATCHETSITEMNO.DESCRIPTIONF1 Specify 30” Rewind Bracket (specify right or left)F2 9914.0233 VR-1 Vertical Rewind AssemblyF3 9914.0372 H-26 Ring GearF4 9914.0382 H-28 Ring GearF5 9914.0393 H-27 Pinion GearF6 9914.0404 H-29 Pinion GearF7SpecifyModel Pinion ShaftF8 9914.0351 Pinion Shaft CollarF9 9914.0618 Pinion Gear Guard (E-Coated)F10 9914.0243 H-2A Pinion Shaft BearingF11 9914.0413 H-30A Brake WheelF12 9914.0451 H-31 Brake SpringF13 9914.0433 H-3 Brake PadF14 9914.0011 H-18 Hand CrankF15 9947.0020 Air Caliper BrakeNotShown9947.0001 Manual Caliper BrakeF16 9947.0024 Pair of Brake Pads (For Air Caliper Brake)F17 9947.0035 Comet Brake Assembly (IV Style)F18 9947.0036 Comet Brake Strap Only (IV Style)F19 9947.0038 Comet Brake Iron Hub (IV Style)F21 9922.0015 Ratchet Wheel (new 2 position)F22 9965.0030 PL-1 PinlockF23 9965.0036 PL-1 Pinlock with Extended Mounting EarsF24 9922.0029 Ratchet Locking Assembly(for N-Series Spring Reels)F25SpecifyModelRatchet Locking Assembly(for Regular Frame Spring Reels)F26 9947.0090 Comet Brake Assembly(Bearing Mounted Style with Stub Shaft)NotShown9947.0043 Comet Brake Assembly(Bearing Mounted Style with Stub Shaft)F27 9947.0130 Cam Lever Drag Brake Kit(including mounting hardware9922.0008 Ratchet Locking SpringNotShownF2F5F10F13F18F26F23F6F19F3F4F8F9F11F12F15F14F21F22F24F27F17SWIVEL JOINTSMARSHALL HOSE SWIVELFor use with all hose end valves. Theswivel action makes connection ofthose end valve to filler valve mucheasier.Item#Connection SizeME850SS-6 3/4” MNPT x 3/4” FNPTME850SS-6/8 1”MNPT x 3/4” FNPTME850SS-8 1”MNPT x 1” FNPTME850SS-8/6 3/4”MNPT x 1” FNPTLP-92 TUBE OF GREASESMITH “FULL-CIRCLE” SWIVELJOINTSSMAC-1121 1/2” 90° joint is designed to replace aHannay hose reel joint, or it can be used asa swivel in a rigid pipe loading arm system.SMAC-2002" Full Circle SwivelCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 203 -

GLOVES / MISCELLANEOUSGLOVESFIRE EXTINGUISHERSWINTER MONKEY GRIPG23-193Liquidproof vinyl coating resists oil, acids,chemicals, and caustics. Curved fingers,wing thumb, and general softness make thisglove very comfortable and easy to wear.Foam insulation locks out cold, keeps handswarm. Deep fleece lining helps retainwarmth, feels good on the hand.WINTER TUF-DUKG31-791M (Medium)G31-791L (Large)Vinyl impregnated to provide an excellentgrip & long wear. Sheds snow, sleet & rain(not liquid proof).G52-547LSummer weight driving gloveG27-805-10BLUE HYCRON LARGE GLOVEMade extra tough for heavy-duty jobsinvolving rough, abrasive materials.Soft jersey lining eliminates seams fromworking areas for greater comfort. Heavydutynitrile coating provides excellent drygrip as well as superior performance whenhandling rough, abrasive materials.FIRST AID KITCLASS A - B - C DRYCHEMICAL FIREEXTINGUISHERSItem #DescriptionTGP-10G 10#TGP-20D 20#SFX418Fire extinguisher decal, 4" x 18"SFX418AFire extinguisher sign, 4" x 18"VEHICLE BRACKETSItem #DescriptionTRB/10 10#TRB/20 20#FA20030RAISED FINISHMONKEY GRIP GLOVEG23-173Liquidproof vinyl coating resists oil, acids,chemicals, and caustics. Curved fingers,wing thumb, and general softness make thisglove very comfortable and easy to wear.Foam insulation locks out cold, keeps handswarm. Deep fleece lining helps retainwarmth, feels good on the hand.This first aid kit meets or exceeds ANSIZ308.1-1998 minimum requirements forworkplace safety.Metal kit contains:1 oz. eyewash, 10 antiseptic towelettes, burn cream with lidocaine,sheer 1” x 3” bandages (16), conforming gauze dressing 2” x 5yd., 1/2” x 5 yd. adhesive tape, (4) 3” x 3” gauze pads, triangularbandage, 4 pair disposable latex gloves, small boxed ice pack, wirescissors, tweezers, 5” x 9” abdominal pad (sterile), first aid guide,10 ammonia inhalant swabs, 8 flexible fingertip bandages, 8 bulkalcohol pads, 6 triple antibiotic ointment, 2 sterile gauze pads 4” x4”, and 12 aspirins.Box Dimensions: 7 3/16” H x 10 11/16” W x 2 3/8” D.EMERGENCY WARNING TRIANGLESR219-3CSet of 3 triangles in a case.BOBTAIL PEG KITMEP300KSafety wood plugs for plugging brokenvalves or pipes in emergencies. Plugs aredriven into opening with a hammer to slowor stop flow temporarily until tank can beemptied. Includes 3/4”,1 1/2”, & 2 1/2” 12” long plugs with holder.- 204 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

SERVICE EQUIPMENTCHOCK BLOCKSTHERMOMETERSPE-AALUMINUM CHOCK BLOCKSOrder PE-BR for bracket.ALD-BDOUBLE RAIL CAR CHOCKSTRENCHERF1202 H TRENCHMASTERA light weight, easily transportedtrencher perfectly suited for layinggas lines. Has a Honda 9HP engine.Weight: 210 lbs.Wheels: Steel w/pneumatic tiresPoints: Tungsten carbideDrive: Pulley & belt systemRate: Up to 20 feet per minuteDepth: 3 to 12 inchesWidth: 1/2” to 3”EXPLOSION-PROOF FLASHLIGHTTANK CAR THERMOMETERSThermometer is designed to measure thetemperature of propane in a railroadtank car.Item #X21420X21272GSTEM LENGTH12” Thermometer w/case12” ThermometerQMI - 230OVEN THERMOMETERStainless Steel, folding type for testing oventemperature. Range is 100°F to 600°F.1259Explosion proof flashlight designed to beused in hazardous locations, such as ona bobtail.MAGNESIUM ANODEAlso available with a 13 HP Hondaengine.Under most soil conditions, theinstallation of a magnesium anode willnot protect a base steel surface byitself. The steel surface must be coveredby a good dielectric mastic tapeor coating. Care should be taken thatthere are no scrapes or breaks in theprotective coating.ITEM # SIZE SUGGESTED TANK SIZE*AN5# 5 LBS. UP TO 120 GALAN9# 9 LBS. UP TO 300 GALAN17# 17 LBS. UP TO 500 GAL* The size of the anode is dependent on different variablessuch as soil condition, etc.** For 1000 gallon tanks, use 2 17# Anodes.VALVE LOCKSD1134Locking cap for 1 3/4” acme fillervalves.LCS4Service Valve Lock. Clamps over ahandwheel to prevent valve from beingopened.THERMOWELD MOLDWITH STRIKERM100 - pipe connections larger than 4"M101 - pipe connections less than 4"STRIKERFlint gunA200#12 copper sleeve8509910 BARRELL LOCKLocks Meter Stop Valves.8610005 KEYExtra Key for 8509910 Lock.CA15THERMOWELD metal shot (20 per boxincluding discs)CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 205 -

SERVICE EQUIPMENT & TRUCK COMPONENTSMAGNESIUM ANODE (CONTINUED)TSP01KANODE TEST APPARATUSUse this apparatus to test to determineif the anode is properly protecting thetank or gas line.TRUCK COMPONENTS (CONTINUED)CV25THROTTLE CONTROL CABLE25’ cable designed to control thethrottle of a bulk truck from the rear ofthe vehicle.SPECIAL TOOLSATSANODE TEST STATIONProvides a convenient way to monitorunderground tank systems. Cathodicprotection test station and terminalenclosure is a high strength, maintenancefree, and non conductive.C1430GBRASS HAMMERC2570-25PTO CABLEWaterproof covered cable control forpower take-offs.ENGINE REMOTE SAFETY SHUT-OFF SYSTEMSA push of the button on the small hand remote transmitterinstantly shuts down the engine, stopping the pump, allowing aRego Flomatic valve or a pneumatically operated valve to close.For a manually operated valve, see WR1760K Air Compressor Kit.TRUCK COMPONENTSFYR-STYKEXTENDABLE MATCHHOLDEROnly 5 1/2” long when closed,extends to over 19” for hardto reach pilots & burners. Hasmagnet and pocket clip.408A2F-2MTRAP-IT FILTERPrimarily used as filter in the liquidcontrol line on a Rego FlomaticInternal Valve. 3/8” Flare X 3/8”MPT.Item #DescriptionM3200-FGL Remote Safety Shutoff, Generic w/lockoutK02-004 ARO Solenoid Valve w/ BracketMVAP227G Remote Transmitter Only, GenericM-ABK Air Brake KitWR1924-01 DOT Approved 1/4”OD TubingMVAP2272120 Transmitter BatteryIEM378463 Air Valve (Toggle Type)IEST146749 Air Valve (Push Button Type)See page 16 for DOT air line tubing and fittings.WR1760KAIR COMPRESSOR W/INSTALLATION KITThis kit is designed to provide an airsource to allow the use of air operatedinternal valves on bulk trucks without airbrakes.WR1760K-2047AIR COMPRESSOR ONLY- 206 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

PROPANE FLARE / VAPORIZORSPROPANE FLARERED DRAGON MANUAL PROPANE FLAREMake Evacuating Remote Propane Tanks quick,safe and easy.• Flare up to 529 gallons/hr.• No electricity required• Compact & portable design• Quick & easy setup & simple to use• Great for emergency evacuation situations• Stable & strudy constructionThe RED DRAGON Manual Propane Flare allos you to evacuatebulk tanks, bobtails and other tanks anywhere quickly, safelyand without venting raw propane into the atmosphere. Thiscompact, durable unit is quick to set up, very simple to use andrequires no electricity making it perfect for emergency crews,haz mat teams and fire departments who need to act fast andin remote locations. Keep one on hand in case emergency flareoffis necessary. Also great for propane distributors and dealersflaring off tanks so that valves and gauges may be changed out,saving you time and money. Comes with everything necessaryexcept the vapor cylinder for pilot torch operation.FEATURES OF ALL FLAREMODELS• Flares liquid or vapor propane• Telescoping flare tower sets up fast &stands 9' above the ground keepingthe flame at a safe distance• Convenient valve box & simpledesign featuring quick connectors& flared fittings make set up quick &easy• Flare Tower stands 9' above theground, keeping the flame at a safedistance• 25' U.L. listed evacuation hose withbulk adaptor• 10' U.L. listed pilot hose & regulator• Stable triangular base & groundstakes for set up on any terrain• Quick and easy setup & operationPFM-16-LPS1/2" Flare48,300,000 BTU/hr MaxFlares up to 529 gal/hrVAPORIZERSWHAT IS A PROPANE VAPORIZER?A propane vaporizer is actually a boiler. Instead of boiling water, itboils propane. It may sound strange that heat is required to vaporizepropane when propane will boil at -44 degrees F., but whenpropane vaporizes by expansion alone, it causes a refrigerationaction. In applications with high propane demand, the uncontrolledvaporization will cause freeze-ups. Direct fired vaporizers use aportion of the propane they vaporize to supply the heat for thevaporization process.RANSOME VAPORIZERSThese units feature a modular design that providesmaximum capacity in a compact, rectangularunit. It incorporates 2 stage pressure regulationand a precision operating temperature switchwhich is factory-set and sealed to preventtampering. Mechanical liquid inlet valve providespositive control of LP Gas liquid level on all RH50,90, and RH120 sizes. Larger sizes incorporate areliable float switch and electric inlet valve toprevent liquid carryover.RH OPTIONSElectric Pilot Reignitor Add Suffix EProtects against pilot outage due to unusuallyturbulent winds and eliminates need for matchesto start vaporizer. 110 V required.Millions ofItem # Gal./Hr. BTU/Hr.RH50 50 4.58RH80 80 7.32RH120 120 10.98RH200 200 18.30RH400 400 36.60RH600 600 54.90RH800 800 73.20RH1000 1000 91.50ALGAS-SDIDIRECT FIREDVAPORIZERSRange in size from40 gph to 800 gph.The Direct FiredVaporizers are usedin a wide variety ofapplications, temporaryand permanent, such as construction heating, crop drying,greenhouses, animal confinement and small to mediumindustrial applications. The units are simple to install with only twoconnections to make and require no electricity. The units arestandard with a 9VDC Auto re-ignitor and relief valve pipe-awayadapter.Model # GPH Rating Million BTU/Hr.40/40H 40 3.6480/40H 80 7.28120/60H 120 10.92160H 160 14.5320H 320 29.1480H 480 43.6640H 640 58.2800H 800 72.8CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 207 -

VAPORIZERSVAPORIZERS (CONTINUED)ELECTRIC VAPORIZERSAlgas-SDI Electric Vaporizers range in size from 12.5 gph to 160gph. Algas -SDI manufactures three types of reliable, dry electricvaporizers in sizes for every application. Their explosion proofdesign allows for installation near a tank or building with nodistance restrictions. The electric vaporizers are ideal for compactinstallations with space restrictions and are used in a wide varietyof applications such as schools, hospitals, mine sites, animalconfinement, hotels and other commercial applications.TORREXX ELECTRIC VAPORIZERSThe TORREXX Electric Vaporizers provideinstant operation within on minute froma cold start. Suitable for all climatesand available in worldwide voltages.All units are standard with auto restart.Available options include economyvalve, remote alarm box, TX stand anda valve & strainer package for easeof installation. The TORREXX meetsClass 1, Divsion 1, Group D(explosion proof) requirements perNPFA #58 & #70.VAPORIZERS (CONTINUED)ZIMMER ELECTRIC VAPORIZERThe ZIMMER is a simple, reliable and affordableoption for smaller loads. The unit can be operated on multiplevoltages ranging from 120V/1Ph to 240V/1Ph without re-wiring theunit. Frequently used in applications such as animal confinement,restaurants and light commercial applications, it's small, compactand explosion proff design allows it to be mounted on the wall ordirectly on top of your tank! Low maintenance with fewer partsto maintain. Optional tank and wall mount kits are available iwthpiping kits to match each one.Model # GPH Rating Million BTU/HrZ40P-V1 20 1.82 **Z40P-UL/CE-V1J 20 1.82 UL/CE Approved**Explosion proof electrical seal-off factory installed. UL/CE model needsseal-off installed in the field.Millions ofModel # Gal./Hr. BTU/Hr.TX25 12.5 1.14TX50 25 2.28TX100 50 4.55TX160 80 7.28TX240 120 10.9TX320 160 14.5ALGAS 2ND SUNCatalytic heating is a flameless process thatinvolves chemical reactions aided by acatalyst. The reactions occur on an electricallyheated catalyst surface causing complexmolecules to rearrange as simpler molecularstructures. The primary byproduct of thiscatalytic process is heat. Second Sun emitsthis heat against the wetted surface of thetank as infrared waves similar to a radiantheater. This warm, low intensity heat mimics theenergy from the sun. Since catalytic heating isflameless, Second Sun meets Class I, Division 2,Group D hazardous locationrequirements.Second Sun SpecificationsVaporization Type: No Flame (Catalytic heater)1Start-up Electrical: DC (only for start-up)2Operating Electrical: Self-generatedElectrical Class: Hazardous Locations (Class I Division 2 Group D)Environmental Range: -40° F to 120° F (-40° C to 49° C)Fuel Type: Propane, butane or any LPG blendInlet Fuel Connection: ¼” NPTMax. Inlet Pressure:Regulated: 10 – 11” wc; (254 – 279mm H20);Unregulated: 10 – 250 PSIG; (0.7 – 17.2 barg)On/Off Activation:Factory SettingsVia tank pressure (adjustable set point)ON @ 60 PSIG (4.14 barg)safety Monitoring (Per nFPA 58)MODEL SS-30 MODEL SS-10 — LAUNCH FALL 2013 —Heat Input: 30,000 BTU/h (7560 kcal/h) 10,000 BTU/h (2520 kcal/h)3Added Vaporizationto Tank:2.2MMBTU/h @ -20°F(550,000 kcal/h @ -28°C0.5MMBTU/h @-20°F(126,000 kcal/h @ -28°CMounts To: 1,000–12,000 US Gal. Tanks (3,785-45,425 liters) 250–3,900 US Gal. Tanks (946–14,742 liters)Tank Diameters: 41" – 84" (1,041 – 2,134 mm) 30" – 84" (762 – 2,134 mm)Unit Weight: 125 lbs. (57 kg) 25 lbs. (12 kg)Unit Dimensions:74"L x 19"W x 9" H(1,880mm L x 486mm W x 227 mm H)Shipping Weight: 185 lbs. (84 kg) 50 lbs. (23 kg)Shipping Dimensions:84"L x 24" W x 12" H(2,134mm L x 610mm W x 305mm H)Tank Pressure:>160 PSIG (11.03 barg)Tank SurfaceTemperature (2):>125° F (51.7° C)Below Min PilotTemp.:OFF — Manual restart required1 Use vehicle battery and “jumper cables”2 Thermoelectric device creates voltage based on ΔT3Second Sun adds vaporization capability to the ambientvaporization capability of the tank itself. Total vaporizationbecomes the sum of the ‘natural’ + ‘added’ vaporization.35"L x 14"W x 9"H(889mm L x 356mm W x 227mm H)Upper Sensor: Reverts to Standby modeLower Sensor: OFF — Manual restartrequiredOFF — Manual restart required42"L x 21"W x 12"H(1,067mm L x 533mm W x 305mm H)Algas-SDI developed its first vaporizer in 1932. Over eighty years later,- 208 -we still lead the market in quality, innovation and commitment to ourpurpose. Our products allow businesses located off the gas grid or underCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

TORCHES / SEDIMENT TRAPS / HEATERSTORCHESMANCHESTER HAND BURNERSM8062 HANDIBOY KITContains 30” burner w/10’ of hose, POLconnector and instructions. Capacity is245,000 BTU @ 50 psig and 350,0000 BTU @100 psig.M8061 POWERJET KITContains 3’ burner w/10’ of hose, 0-100 lb.adjustable regulator, pressure gauge, POLconnector & instructions. This torch has a pilot& a squeeze control valve for intermittentoperation. Capacity is 350,000 BTU @ 50 psigand 500,000 BTU @ 100 psig.SEDIMENT TRAPSDRIP LEG KITSThese kits include a tee, two nipples, anda cap. They are available in malleableblack pipe or galvanized pipe. For lowpressure use.Item #DLKB-3/8DLKG-3/8DLKB-1/2DLKG-1/2DLKB-3/4DLKG-3/4Description3/8” Black3/8” Galvanized1/2” Black1/2” Galvanized3/4” Black3/4” GalvanizedUNI-TRAP MULTI-POSITIONSEDIMENT TRAPM8012 SUPER 8 BURNER8’ Burner is similar to the Powerjet burnerbut extra length allows for better access toweeds, etc. For the kit add optional items:Item# DescriptionM03300H 25" hose1685 POL adaptorH1200 Adjustable regulatorFLAME ENGINEERING TORCHESFEVT2-23CHAND TORCH KITIncludes 100,000 BTU/hr hand torch, 10’ of hose, flame adjustingvalve, POL adaptor, & flint igniter.FEVT3-30C TORCH KITIncludes 500,000 BTU/hr 30” torch, 10’ ofhose, flame adjusting valve, & POL adaptor.FOR SAFETY: “Uni-Trap” reduces the number of fittings and humanerror involved in installation of the standard drip-leg trap - reducingliability. “Uni-Trap” comes standard with a mesh filter which stopsthe flow of gas should it fill with sediment.“Uni-Trap” can be installed either horizontally or vertically. This makes“Uni-Trap” the only safety solution in applications where there isinsufficient room for a standard nipple-tee installation.ITEM # SIZE WORKING PRESSUREB93UT-08 1/2” FNPT 5 psigINFRA-RED HEATERSMH125LPCONTRACTOR SERIESThe MH125LP is a 125,000 BTU RadiantPropane Heater. Made of ruggeddurable steel, this heater is built to last.The MH125LP provides reliable heat forareas up to 3000 square feet. It operatesup to 17 hours on a 100# propane. TheMH125LP now features a folding handleand transport wheels for easy moving.This unit also features a piezo push buttonignition. The MH125LP comes ready touse with the included 12 foot hose andregulator.EH25N/EH22L INFRA-REDGARAGE/SHOP HEATERWall mounted unit gives you the choiceof LPG (22,000 BTU/hr.) or Natural Gas(25,000 BTU/hr.). All necessary brackets,hardware and thermostat included.No electricity required.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 209 -

HEATERSINFRA-RED HEATERS (CONTINUED)4000 SERIES OVERHEADHEATERSFor use in low profile buildings w/ceilings from 10’ to 15’.Approximate coverage area is 400 2foot.MODEL # GAS IGNITION BTU’S/HR* WEIGHTE4040NPP N POWER PILE 40,000 25 LBS.E4040LPP LP POWER PILE 40,000 25 LBS.E4040NDSP-5 N AUTO SPARK 40,000 25 LBS.E4040LA-5 LP AUTO SPARK 40,000 25 LBS.NOTE: All 4040 Heaters come with an extra orifice to convert to30M.8000 SERIES OVERHEADHEATERSFor use in high profile buildingsw/ ceilings from 16’ to 20’.Approximate coverage area is 600 2foot.MODEL # GAS IGNITION BTU’S/HR* WEIGHTE8060NPP N POWER PILE 60,000 34 LBS.E8060LPP LP POWER PILE 60,000 34 LBS.E8060NDSP-5 N AUTO SPARK 60,000 34 LBS.E8060LA-5 LP AUTO SPARK 60,000 34 LBS.NOTE: All 8060 Nat Gas Heaters come with extra orifices to convertto 50M or 70M. A11 8060 LP Gas Heaters come with an extra orificeto convert to 50M.INFRA-RED HEATERS (CONTINUED)9000 SERIES OVERHEAD HEATERSFor use in ultra high buildings w/ ceilings from 24’& higher.Approximate coverage area is 1200 2 foot.MODEL # GAS IGNITION BTU’S/HR* WEIGHTE9120NPP N POWER PILE 120,000 61 LBS.E9120LPP LP POWER PILE 120,000 61 LBS.E9120NDSP-5 N AUTO SPARK 120,000 61 LBS.E9120LA-5 LP AUTO SPARK 120,000 61 LBS.NOTE: All 9120 Nat Gas Heaters come with extra orifices to convertto 100M or 140M. All 9120 LP Gas Heaters come with an extraorifice to convert to 100M.INFRARED HEATERAPPROXIMATE COVERAGE40,000 BTU 400' 2 Mounted 12'-14'60,000 BTU 600' 2 Mounted 16'-18'100,000 BTU 1000' 2 Mounted 20'-24'120,000 BTU 1200' 2 Mounted 22'-28'MR. HEATER SMALL PORTABLE HEATERSEMH15-TPOL connection for use with standardcylinder. 12,000 BTU/hr.9000S SERIES OVERHEAD HEATERSFor use in high buildings w/ceilings from 18’ to 24’.Approximate coverage area is 1000 2 foot.MODEL # GAS IGNITION BTU’S/HR* WEIGHTE9100SNPP N POWER PILE 100,000 46 LBS.E9100SLPP LP POWER PILE 100,000 46 LBS.E9100SNDSP-5 N AUTO SPARK 100,000 46 LBS.E9100SLA-5 LP AUTO SPARK 100,000 46 LBS.NOTE: All 9000S Heaters come with extra orifices to convert to 80Mor 90M.EMH24-TTwo 12,000 BTU burners. One can beused for 12,000 BTU or both for 24,000BTU. POL connection for use w/standardcylinder.- 210 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

SMALL ENGINE CONVERSIONLPG SMALL ENGINE MOTOR FUEL OPPORTUNITIESPropane is the engine fuel with the best safety record, bar none!No contamination, environmentally sound, and very very cost effective!Propane provides a quick payback, typically 30% less than gasoline.Longer engine life. No spillage or contamination. Less maintenance.Reduced cost of operation 60% reduction in smog forming emissions and 80% reductionin toxic emissions compared with diesel and gasoline fuel.There are many small engine market areasWe can provide conversion kits tailored to convert almost any gasoline powered engineLawn Care, Floor Buffers , Carpet Cleaning, Forklifts, Pressure Washers, Ag Equipment,Pump Motors,Off Road Vehicles, Rock Climbers, Hill Climbers, Mudders, Generators, Emergency,Standby, Portable, RV, Commercial and Marine Airboats, Concrete Saws,Finishing Equipment, Garden Care, Tillers, Plows, etcOur systems are engineered for specific applications and come complete with or without tanks, you specify your needsTypes of Conversions• Spud in• Adaptor Plate• Direct Carb Replacement• Low Pressure and Hi- Pressure (Stationary or Mobile)• Air or Water Cooled Engines• Bi-fuel and Tri-Fuel Kits available for many EnginesConversion kits available for these engines and many moreArctic Cat, Briggs & Stratton, Craftsman, Chrysler, Cushman, Ford, General Motors, Generac,Honda, Kawasaki, Kohler, Kubota, Lauson-Tecumseh, Makita, Mitsubishi, Onan, Tecumseh,Wisconsin, Robin, and Yamaha, plus Chinese clonesTo order we need some information(Briggs & Stratton, Kohler, Onan, etc.) (Most Important be Specific)Stationary or Mobile_____________ Application _____________________Type of Fuel ____________________________________(LPG or NatGas) (Mono or Bi-Fuel) Electric or Rope Start(Generator, Mower, Buffer etc.)CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 211 -

LAWN MOWER CYLINDERSPart No.5456TC.3936793685456TC.393679368Product DataDescription20# TC/DOT Mower Cylinder - Steel33.5# Mower Cylinder - Aluminum43.5# Mower Cylinder - AluminumDescription20# TC/DOT Mower Cylinder - Steel33.5# Mower Cylinder - Aluminum43.5# Mower Cylinder - AluminumPROPANE MOWER CYLINDERSWaterCapacity Lengthgal in4.76 13.68.0 22.410.4 28.8kg mm21.6 345.436.3 56947.2 731.5Heightin19.028.334.4mm482.6718.8873.8Diameterin121212mm304.8304.8304.8TareWeightlbs272526kg12.311.311.8Other accessories available on request.- 212 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

IMPCO MIXERS AND CARBURETORSCARBURETION EQUIPMENT50 SERIES50 Series 100/200 Series 125/225 SeriesITEM # DESCRIPTION REPAIR KITICA55 Carburetor (Replaced Model 50) IRKCA5560/100/200 SERIESDESCRIPTIONITEM # MIXER DIAPHRAGM AIR HORN AIR GAS VALVE ASSYICA100M Standard Hydrin IAV1-14125/225 SERIESDESCRIPTIONAIR GAS VALVEITEM # MIXER DIAPHRAGM ASSYICA125M Standard Hydrin IAV1-14ICA125M-2 Standard Silicone IAV1-14-2ICA225M-2 Standard Silicone IAV1-12-2IMPCO MIXERS AND CARBURETORS300-1, 20, 50, 70 SERIES300 - 1, 20, 50, 70 Series 425 SeriesMINOR REPAIR MAJOR REPAIRITEM # DESCRIPTION KIT KITICA300AM-2 Series 1 standard mixer; Hydrin diaphragm w/ V2-11 IRK300MI1/20 IRK300MA1/20standard flow gas valve; Boden cable and cam, no filter or top coverICA300AM50-2 Series 50 standard mixer; Silicone diaphragm w/ V2-39 IRK300MI50-2 IRK300MA50-2high flow gas valve; Boden cable and cam, no filter or top cover425 SERIESAIR GASITEM # DESCRIPTION VALVE ASSYMIXERDIAPHRAGMICT425M-2 Standard Silicone IAV1-16-2*IFT425M-2 Feedback Silicone IAV1-1651-2*For EC1 system use IAV1-1637-2When replacing a tamper-resistant IFB425M-2TP mixer on a factory converted Ford truck (1993-97 429 cubic inch engine),use aICA425M-2 mixer and replace standard air gas valve with an IAV1-1644-2.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 213 -

CARBURETION EQUIPMENTIMPCO CONVERTERS AND REGULATORSJ Series L Series E SeriesJ SERIESTWO STAGE CONVERTER 100 HPITEM # SECONDARY DIAPHRAGM OUTLET PRESSURE REPAIR KITIJB-2 Silicone -1-1/2" IRKJ-2IJO-2 Silicone -1/2" IRKJ-2COBRA SERIESTWO STAGE CONVERTER 100 HPITEM # SECONDARY DIAPHRAGM OUTLET PRESSURE REPAIR KITICOBRA Fluorosilicone -1-1/2" IRK-COBRAICOBRAI Fluorosilicone -1/2" IRK-COBRAL SERIESTWO STAGE CONVERTER 325 HPITEM # SECONDARY DIAPHRAGM OUTLET PRESSURE REPAIR KITILB-2 Silicone -1-1/2" IRKL-2E AND PEV SERIESTWO STAGE CONVERTER 325 HPITEM # SECONDARY DIAPHRAGM OUTLET PRESSURE REPAIR KITIEB-2 Silicone -1-1/2" IRKE-2IEO-2 Silicone -1/2" IRKE-2- 214 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

CARBURETION EQUIPMENTFUEL LOCK-OFFS AND FILTERSAFC-111MULTI-FUEL SHUT-OFF VALVE1/8” FNPT Inlet and Outlet12 VoltFUEL LOCK-OFFS AND FILTERS (CONT)C234112 VOLT LP FUELOCK1/4” FNPT Inlet1/4” MNPT OutletAFC-121 & 123MULTI-PURPOSE SHUT-OFF VALVE1/4” FNPT Inlet and Outlet12 VoltAFC-121AFC-123Straight Through90° Side Inlet andBottom OutletAFC-152INLINE FILTER SHUT-OFF VALVE1/4” FNPT Inlet1/4” MNPT Outlet12 VoltReplaceable filterC2655LP BULKHEAD FILTER W/ MAGNET1/4” FNPT Inlet and OutletReplace. Filter Kit: C286-1798IVFF30-2IMPCO VACUUM FUELOCKVacuum fuelock and filter with siliconediaphragm.Repair Kit:Filter Pad and Gasket:Replaceable Filter Only:IRK-VFF30-2IAF1-10IF1-10AFC-418BFILTER LOCK-OFF VALVE1/4” FNPT Inlet and 1/4” MNPT Outlet12 VoltCeramic magnet traps fine metallicparticles. High performance filtrationcapability with integrated 20 micronreplaceable filter.AFC-155INLINE FILTER WITHMAGNET1/4” FNPT Inlet1/4” MNPT Outlet12 VoltCleanable and replaceable 40 micronfilter element. Bonded ceramic magnet.AFC-156BULKHEAD FITTINGWITH FILTER1/4” FNPT Inlet (Bottom fitting)1/4” FNPT Outlet (Top fitting)LARGE SOLENOID VALVESVACUUM SWITCHESHigh flow solenoid valves for vapor serviceon fixed industrial engines.PART # SIZE VOLTAGEG330-05 3/4” 12VP8215B50 1” 12VP8223G5 3/4” 120V1501-LBEAM MICROVAC VACUUMSWITCHUltra-sensitive vacuum switch. Ideal foruse in low vacuum situations.Switch with Installation hardware:1501-PAComplete Repair Kit:1501-RKRepair Kit for Switch Only: 1501-26MATERIAL HANDLING CONVERSION EQUIPMENTReplacement Filter:AFC-156FWe carry a complete selection of IMPCOconversion kits for lift trucks and othermaterial handling applications.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 215 -

AFTERMARKET CONVERSION KITSAlternative Fuel SystemsCARBURETION EQUIPMENTPRINS VSI ALTERNATIVE FUEL SYSTEMflow rate ( c c/st)706050403020100type 1type 2type 30 5 10 15 20 25ti (msec)VSI• VSI: Vapour Sequential Injection• Fully integrated “master – slave”management system• EOBD compatible (no signalemulation required)• System diagnostics by monitoringvital signals and components• Emission strategy functions foroptimization• System Communication via CANbusprepared• Availa ble for LPG and CNGconfigurations• LPG performance comparable topetrol• R67-01 and R 110 homologated• Corrosion protected.REDUCER• Single Stage• Large capacity (14gr/s)• Stable dynamic characteristics• Adjustable pressure range with antitamperseal• Map independent system, due toexcellent LFR of injector• Map function, optional if required• Integrated OEM coolant sensor• Complies with R67-01 homologationwith 5 bar pressure relieve valve• Complete with electronic lock offvalve, liquid filter, and magnet• Compact design for ease ofinstallationKEIHIN OEM INJECTOR• Developed in cooperation withPrins by Keihin Corp, Japan oneof the worlds leading injectormanufacturer, ensuring quality andreliability• Excellent linear flow rate (LFR =linear behavior from minimum tomaximum flow)• Linear form 2, 5 ms• Model range available to caterfo r s ma l l a n d l a rg e e n g i n edisplacement• OEM quality injectors, performanceguaranteed and long durability (290million cycles)INJECTOR RAIL• Uncomplicated fitting• assembled and leak tested atfactory prior to despatch• 2/3/4/5/6 cylinder assembliesFILTER UNIT• Compact design with single or dualdelivery outlets• Fitted with 10-micron (ß10>75)dry gas filter protecting the finetolerance of the injectors, formgaseous pollutants.• Combined gaseous temperatureand pressure sensorVSI ECM• ECM injector driver capability up to8 cylinders• Injector drivers based on “closedloop peak & hold current control”• Injector diagnostics constantmonitoring: - No load- Overload- Driver temperature- Short circuit• Diagnostics, service and parameterload software operates fromWindows 98 / 200 / XP applications• CAN-controller (2.0b) communicationspossible with OEM CAN-bus• Complete wiring harness: colorcoded, with text and numberingto ensure simple and efficientinstallationFUEL SELECTOR SWITCH• Small and compact design suits allcabin interiors• Fuel select: via smart touch control,informs operator of LPG tankcontents, audible buzzer to alertlow level switching or fault codes,illuminated fault code warning withLEDTANK DIMENSIONS• Cylindrical tanks available: 30 ltr.– 230 ltr.• Torodial space saving tanksavailable to suit all applications: 51ltr. – 95 ltr.• Spare wheel covers, flat tire repairavailable.KCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 216 -- 107 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

ALTERNATIVE FUEL SYSTEMSCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 217 -

AFTERMARKET CONVERSION KITSPROPANEPowered alternative Fuel SyStemSBi-FuelIMPCO Automotiveis the industry leaderin alternative fueltechnology.imPCO automotive systems arecustom-designed to specific platforms.This ensures ease of installation, topperformance and long operating lifewith minimal maintenance.simPle, eFFiCieNt eNGiNeeRiNG.Most Bi-Fuel systems are easy, one tankconfigurations.availaBle tODay for america’s most popular fleet vehicles. Many pickup trucks,cargo vans, SUVs, passenger cars and shuttle buses from leading OEMs are availablewith IMPCO Automotive Bi-Fuel conversions. Optimize your fleet vehicles witha cleaner, lower maintenance, cost-saving propane powered system from IMPCOAutomotive. It’s good business for your business.vertical integration IMPCO Automotive designs, engineers and manufactures thecomponents in its propane gas systems. This allows us to engineer total compatibilityinto every system from testing and calibration through production and installation. Thisis not truly achievable with the “off-the-shelf” components used by most companies.Our exceptional engineering means components are matched for dependability,performance, efficiency and improved cost savings.imPCO automotive is fully authorized by leading OEMs to design and install LPGsystems for passenger cars, light- and medium-duty trucks. This means each systemis uniquely engineered to OEMStandards for every customer.Our industry leading engineeringgroup in Detroit, Michigan appliesthis level of quality and confidenceto every system produced.Warranty – 3-year/36,000 milelimited warranty.- 218 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

DIESEL ECONOMIZERCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 219 -

APPENDIXKit Part# Repairs Description Kit Part# Repairs Description1P1107 C404 Series Internal Valve 4" Upper Gasket ME206-09 ME206, ME207, ME207SF, 212 Degree Thermal1P8777 C483 Series Internal Valve 3" Upper Gasket - ME208SF Safety PlugPre-1990 Construction ME251-02 ACME Adapters 3 1/4" ACME ScreenRN30012T012 N300, N400 Series 1 1/4" - 1 1/2" Repair Kit ME251-03 ACME Adapters 3 1/4" ACME Retaining RingRN30016T012 N300, N400 Series 2" Repair Kit for ScreenRN30024T012 N300, N400 Series 3" Repair Kit ME390-2H MEM390 .880 Left Handed MaleRN3008T012 N300, N400 Series 1/2" - 1" Repair Kit Thread Extension w/ ForgedRN350T00012 N350, N450 Series 1/2" - 1" Repair Kit HandleT10561 C483 Series Internal Valve 3" Lower Gasket ME390SWR-1 MEM390 6" Male Soft Nose POL w/T10958 J31L Rotary Gauge Rotary Gauge Cap Only O-ring x 1/4" MNPT Stem -T10971 J31L Rotary Gauge Rotary Gauge Cap & Seat Stainless SteelT11182 C404 Series Internal Valve 4" Lower Gasket ME390WR-1 MEM390 6" Male Soft Nose POL w/T13049 N550 Series ESV Magnalube O-ring x 1/4" MNPT Stem -T13090 N550 Series ESV Packing Kit BrassT13184 B600 Series, C600 Series, Replacement ME458-03 ME458, ME460 & ME462 Nylon GasketC600H Series, & Bonnet Assembly ME458-04 ME458 Nitrile O-ringL677 AR Multivalve Series ME461 ME460 & ME462 1 5/8" UNS FPT ReplacementT13500 N550 Series ESV Fusible Link Cap & GasketT13603 C483 Series Internal Valve 3" Upper Gasket - ME461S ME462S 1 5/8" UNS FPT ReplacementPost-1990 ConstructionCap & GasketT20714 N550 Series ESV Rubber Covered ME461SS ME462SS 1 5/8" UNS FPT ReplacementReplacement HandleCap & GasketWG4X396 N562-26 Female Airline ME50-H ME50P-2 & ME60P-2 Series Hose and Bell AssemblyQuick Disconnect ME515-3 Type 1 Filler Couplings 7" Male Hard Nose POLWG4X672 N562-26 Male Airline x 1/4" MNPT Stem - BrassQuick Disconnect ME516-1 Type 1 Filler Couplings 6" Male Hard Nose POL xWGX396 N562-26 Female Replacement 1/4" MNPT Stem - BrassCoupling ME516-2H Type 1 Filler Couplings 1 5/16" FACME ExtensionWGX672 N562-26 Male Replacement w/ Forged HandleCoupling ME516S-01 Type 1 Filler Couplings 6" Male Hard Nose POL x1/4" MNPT Stem -Stainless SteelME530-03 ME530, ME531, ME532 & Replacement KeyME533Kit Part# Repairs Description ME571-06 ME571 Check Adapter Replacement Plastic SpacerME1002A POL Adapters Male Hard Nose POL x 1/4" RingMNPT - Tailpiece only ME571-06 ME571 Black ACME SpacerME1002B POL Adapters 7/8" POL Nut ME571-2-03 ME571 Check Adapter Replacement Nose GasketME1002BLH POL Adapters 1 18" POL Nut ME578-02 ME578 & ME600 Series Replacement KeyME1600AH POL Adapters POL Hex Brass Handwheel ME601-10-108 Filler Valves Replacement Nylon BodyME1600AR POL Adapters POL Round Brass Handwheel Gasket for ME601-10ME1630-02 POL Adapters Plastic Handwheel for ME601-10-901 Filler Valves Replacement Molded Valve7/8" POL Nut Poppet for ME601-10ME1630-03 POL Adapters Plastic Handwheel Spring ME601-10SRK Filler Valves Complete Seal Repair Kit forME185 ME-806-16 3 1/4" ACME Dust Plug ME601-10w/ Lanyard ME601-6SRK Filler Valves Complete Seal Repair Kit forME200B-103 ME200 Chock Block Relpacement Rubber ME-601-6Bumper Pad ME601-902 Filler Valves Replacement 1 3/4" ACMEME200EXT ME200 Chock Block Wheel Chock Block 6" Cap w/ Lanyard (plastic)Standoff Extension Kit ME60P-2-01 ME60P-2 Screw Driver ToME205-013 ME205, ME205R, ME225, 212 Degree Thermal Adjust GuageME226, ME227, ME228, Safety Plug ME650-03 Y-Strainers 1/2" & 3/4" ReplacementME552 & ME710Screen, 40 Mesh- 220 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

APPENDIXKit Part# Repairs Description Kit Part# Repairs DescriptionME650-03/20 Y-Strainers 1/2" & 3/4" Replacement ME815IBC-16BRK Globe & Angle Valves 2" Angle & Globe Valve w/Screen, 20 MeshIntegrated Back CheckME650-03/80 Y-Strainers 1/2" & 3/4" Replacement Complete Bonnet AssemblyScreen, 80 Mesh ME815IBC-16SRK Globe & Angle Valves 2" Angle & Globe ValveME652-03 Y-Strainers 1" Replacement Screen, w/ Integrated Back Check40 Mesh Replacement Seal Repair KitME652-03/20 Y-Strainers 1" Replacement Screen, ME815K Combination Valve Bonnet Assembly for20 Mesh ME830ME652-03/80 Y-Strainers 1" Replacement Screen, ME815K Globe & Angle Valves 1/2", 3/4" & 1" Angle &80 Mesh Globe Valve CompleteME653-02 Y-Strainers 1 1/4" Replacement Screen, Bonnet Assembly40 Mesh ME815K ME449 Series Liquid Replacement BonnetME653-02/20 Y-Strainers 1 1/4" Replacement Screen, Transfer Valves Assembly20 Mesh ME815P-16BRK Globe & Angle Valves 2" Angle & Globe Valve w/ME653-02/80 Y-Strainers 1 1/4" Replacement Screen, Pilot Complete Bonnet80 Mesh AssemblyME654-03 Y-Strainers 1 1/2" Replacement Screen, ME815P-16SRK Globe & Angle Valves 2" Angle & Globe Valve w/40 Mesh Pilot Replacement SealME655-03 Y-Strainers 2" Replacement Screen, Repair Kit40 Mesh ME840-108-225 Bypass Valves 3/4" & 1" High FlowME655-03/20 Y-Strainers 2" Replacement Screen, Bypass Valve Replacement20 Mesh Spring, 100-225 PSIME655-03/80 Y-Strainers 2" Replacement Screen, ME840-16-104 Bypass Valves 1 1/4" - 2" Universal Valve80 Mesh Poppet - Stainless SteelME656-03 Y-Strainers 3" Replacement Screen, ME840-16-108-125 Bypass Valves 1 1/4" - 2" High Flow40 Mesh Bypass Valve Spring,ME656-03/80 Y-Strainers 2" Replacement Screen, 91-125 PSI80 Mesh ME840-16-108-150 Bypass Valves 1 1/4" - 2" High FlowME791K ME791 Quick Acting Non-Locking Series Bonnet Bypass Valve Spring,Toggle Valves Repair Kit 126-150 PSIME792K ME792 Quick Acting Locking Series Bonnet ME840-16-108-40 Bypass Valves 1 1/4" - 2" High FlowToggle Valves Repair Kit Bypass Valve Spring,ME800-HRK ME800 & ME800EXT Handle Repair Kit 20-40 PSIME800-LSRK ME800 & ME800EXT Lower Seal Repair Kit ME840-16-108-70 Bypass Valves 1 1/4" - 2" High FlowME800-SARK ME800 & ME800EXT Stem Assembly Repair Kit Bypass Valve Spring,ME800-USRK ME800 & ME800EXT Upper Seal Repair Kit 41-70 PSIME806CRK ME-806-16 Coupling Repair Kit ME840-16-108-90 Bypass Valves 1 1/4" - 2" High FlowME806VRK ME-806-16 Valve Repair Kit Bypass Valve Spring,ME815-10/16HRK Globe & Angle Valves 1 1/4" & 1 1/2" Angle & 71-90 PSIGlobe Valve Replacement ME840-16-109 Bypass Valves 1 1/4" - 2" UniversalHandle & Retaining NutBonnet O-ringME815-10BRK Globe & Angle Valves 1 1/4" & 1 1/2" Angle & ME840-16-110 Bypass Valves 1 1/4" - 2" UniversalGlobe Valve CompleteSpring Guide O-ringBonnet Assembly ME840-24-105-100 Bypass Valves 3" High Flow Bypass ValveME815-10SRK Globe & Angle Valves 1 1/4" & 1 1/2" Angle & Spring, 0-100 PSIGlobe Valve Replacement ME840-24-105-200 Bypass Valves 3" High Flow Bypass ValveSeal Repair KitSpring, 100-200 PSIME815-16BRK Globe & Angle Valves 2" Angle & Globe Valve ME840-24K Bypass Valves 3" High Flow BypassComplete Bonnet AssemblyComplete Repair Kit LessME815-16SRK Globe & Angle Valves 2" Angle & Globe Valve SpringReplacement Seal Repair Kit ME840-24SRK Bypass Valves 3" High Flow Bypass SealME815-24BRK Globe & Angle Valves 3" Angle & Globe Valve Repair KitReplacement Bonnet ME840-6K Bypass Valves 3/4" & 1" High FlowAssemblyBypass Complete Repair KitME815-24HRK Globe & Angle Valves 3" Angle & Globe Valve Less SpringReplacement Handle Kit ME840-6SRK Bypass Valves 3/4" & 1" High FlowME815-24SRK Globe & Angle Valves 3" Angle & Globe Valves Bypass Complete SealReplacement Seal KitRepair KitCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 221 -

APPENDIXKit Part# Repairs Description Kit Part# Repairs DescriptionME840-8-108-150 Bypass Valves 3/4" & 1" High Flow Bypass ME930-905 ME930 Series Accu-Max 4" D.O.T. Dial, Glow/BlackValve Replacement Spring,Float Gauge50-150 PSI ME930C-905 ME930 Series Accu-Max 4" D.O.T. Dial, Silver/BlackME840-8-108-60 Bypass Valves 3/4" & 1" High Flow Float GaugeBypass Valve Replacement ME940-905 ME940 Series Accu-Max 8" ASME Dial - Glow/BlackSpring, 25-60 PSIFloat GaugeME840C-16-104 Bypass Valves 1 1/4" - 2" Classic Valve ME940C-905 ME940 Series Accu-Max 8" ASME Dial - Silver/BlackPoppet - Stainless SteelFloat GaugeME840K Bypass Valves 1 1/4" - 2" High Flow ME980-6K Emergency Shut-Off Valve 3/4" - 1" ESV CompleteBypass Complete RepairRepair KitKit - Less Spring ME-980-6SRK Emergency Shut-Off Valve 3/4"- 1" ESV Valve SealME840SRK Bypass Valves 1 1/4" - 2" High Flow Repair KitBypass Seal Repair Kit ME981-901 Flow Indicating 1 1/4" - 3" ReplacementME850SS-K Hose End Swivel Seal Repair Kit Check Valve Swing Check Indicator DialME868-16-05 Bypass Valves 1 1/4" - 2" Universal MEP801-03 MEP801 Series Black Urethane Hose End4 Bolt Flange Oring Holster SleeveME870-10-06 Back Check Valves 1 1/4" Back Check Valve MEP801-04 MEP801 Series Black Urethane Hose EndO-ringHolster StrapME-870-16-06 Back Check Valves 2" Back Check Valve O-ring MEV250-013 External Pressure Relief Relief Valve Dust CapME870-24-06 Back Check Valves 3" Back Check Valve O-ring Valves with LanyardME870-24-06 Bypass Valves 3/4" & 1" Huigh Flow MEV250-015 External Pressure MEV250 Series StainlessBypass Valve Replacement Relief Valves Steel Weep Hole DeflectorBonnet O-ringME870-6-06 Back Check Valves 3/4" Back Check ValveO-ringME875S-16-05 ME875S-16 Sight Flow Replacement Glass Kit Part# Repairs DescriptionSwing Check Valve R1475-80 *1475V, *1475W, *2593, Filler Kit Less BodyME875S-16-06 ME875S-16 Sight Flow Replacement Glas Gasket *2594Swing Check Valve R19100-50B 9101P5H, *8555A , 8555D Includes: Bonnet, Stem,ME875S-16-07 ME875S-16 Sight Flow Nitrile O-ring Seal O-ring & HandwheelSwing Check Valve R19101-50 9101P5H, *8475 Series, Complete Multi-BonnetME875S-24-05 ME875S-24 Sight Flow Replacement Glass 6542A, 6543A AssemblySwing Check Valve R19104-50 7556 Series, *8477 Series, Cut-Off Kit - Multi-Bonnet -ME875S-24-06 ME875S-24 Sight Flow Rplacement Glas Gasket *8484, 8593 Series, *8594 includes Bonnet, Stem &Swing Check Valve Series, 8555R, 6532A, HandwheelME875S-24-07 ME875S-24 Sight Flow Nitrile O-ring Seal 6533A, 6542A, 6543A,Swing Check Valve 6532R, 6533R, 6542R,ME9101BRK ME9101Series Service MEC Universal Bonnet 6543RValves Replacement Assy w/o R19104-80 Bonnet Repair Kit - UpperHandwheelPacking With Seal RingsME9101C1-102 ME9101 Series Service Universal Replacement POL For Multi-Bonnet OnlyValves Service Valve Handwheel R2418-51 *1475V , *1475W , *2418, Vapor Kit With BodyME9101C1BRK ME9101 Series Service MEC 100 LB. Service Valve *2465, *2550, *2593,Valves Bonnet Assembly w/ *2594Handwheel R3100-80A *1475 Series,* 2593, Cut-Off KitME9101P5-105 ME9101 Series Service Universal Replacement 2594, *3100 & *7100Valves Motor Fuel Service Valve series, *2593Handwheel R3100-80B *3100 & *7100 Series Repair KitME9101P5-109 ME9101 Series Service Replacement Handwheel R3100-81K *1475V, *1475W, *2593, Bonnet Assembly -Valves Screw #10-32 - SS *2594, *3100 & *7100 Right Hand ThreadME9101P5-113 ME9101 Series Service Replacement Engine Fuel Series, *2593Valves Service Valve Name Plate R6542B-50 8555DL11.6, 8555D, Bonnet Assembly -ME9101P5-114 ME9101 Series Service Universal Replacement 8555R, *8555S, 6532, Top CompleteValves Bonnet Seal - Nylon 6532A, 6533A, 6542A,ME9101P5BRK ME9101 Series Service MEC Engine Fuel Service 6543A, *6532D, * 6533D,Valves Valve Bonnet Assembly w/ *6542D, 6543D, 6532R,Handwheel6533R 6542R, 6543R* DENOTES OBSOLETE VALVE- 222 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

APPENDIXRegOKit Part# Repairs Description Kit Part# Repairs DescriptionR6542B-80 8555DL11.6, *8555, Internal Repair Kit D07-000-7300-009 GG1E Repair Kit*8555A , 8555D, 8555R,*8555S, 6532A, 6533A,6542A, 6543A, *6532D,*6533D, *6542D, *6543D,6532R, 6533R, 6542R,6543RR7141M-3 7141M Internal flat WasherR7579-50 6579, 7579 Filler Kit With BodyR7579-80 7579, 6579 For 1 1/4"MNPT x 1 3/4"ACME Filler ValveR7647B-80 7647SC For 3/4"MNPT x 1 3/4"ACME Filler ValveR8100-50 7556 Series, *8484, 8593 Cut-Off KitSeries, *8594 Series, *R8555R8475-50 *8475 Series, *8477 Filler Kit With BodySeries, *8484, 8593 Series,*8594 SeriesR8475-51A 7556 Series, *8475 Series, Vapor Kit With Body*8477 Series*8484, 8593Series, *8594 SeriesR8475-80 *8475 Series, *8477 Series, Filler Kit Less Body*8484, 8593 Series, &8594 SeriesR8475-81A 7556 Series, *8475 Series, Vapor Kit Less Body8477 Series, 8593 Series,*8594 SeriesR8545AK-KIT 8545AK Repair KitR903-50 9101P5H Repair KitR903-51 *8555S, *6532D, *6533D, Cut-Off Kit*6542D, *6543D* DENOTES OBSOLETE VALVE®Gas Guard Filler NozzleSWIVEL JOINTSKit Part#RepairsDescriptionSMAC-112NSK SMAC-112 1 1/2" NH3 Repair KitSMAC-112SK SMAC-112 1 1/2" Smith Repair KitKit Part# Repairs Description1E8124 PV623C Replacement Gasket1901 PV3250 Series Replacement Handwheel1855-100-KIT PV1855SD Repair Kit1901S PV2033CLDB Replacement Handwheel2033-100-KIT PV1447B Vapor Repair Kit3250-8LH-KIT PV3250 Series, Bonnet KitPV2035A375,PV3250A250, PV1447B3329-13LH-K PV2030BC, PV1427C Bonnet Kit3329-7 PV2030BC, PV1427C Replacement Handwheel3429-100-KIT PV3329BDB Dual Bonnet, Bonnet & Stem AssemblyPV2033C(To Convert A StandardValve To A Dual Bonnet)3740-13 PV1447B Handwheel Screws6775-60-KIT PV2033CLDB Bonnet AssemblyCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 223 -

APPENDIXLF1-C-DELUXE DISPENSER KITKEY DESCRIPTION QTY1 C407-10-05 - INTERNAL VALVE 12 N10X60 - 1 1/4" X 6" NIPPLE 13 E10902 - 1 1/4" ELBOW 24 N10X30 - 1 1/4" X 3" NIPPLE 15 ME653S - 1 1/4" STRAINER 16 HP06 - 3/4" PLUG7 GC10-18" - 1 1/4" X 18" HOSE 18 C103 - 1 1/4" COUPLING 19 S10X08 - 1 1/4" X 1" SWAGE 110 U083 - 1 1/4" UNION 111 ME141 - 1 1/4" VAPOR COUPLING 112 T062 - 3/4" TEE 113 B06X04 - 3/4" X 1/2: BUSHING 114 N04X15 - 1/2" X 1 1/2" NIPPLE 115 J100-703 - 1/2" BALL VALVE 116 PV1876 VAPOR VALVE 117 48FK - 1/2" X 3/4" HALF UNION 118 MEF202 - MPOL X 1/2" FL., E.F. 119 CLH15C - KIT 1- 224 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

APPENDIXKEY DESCRIPTION1 LIQ. LEVEL & PRESSURE GAUGE2 FLOAT GAUGE3 J701 THERMOMETER4 H282-250 RELIEF VALVES WITH ME-P104-24PIPEAWAY ADAPTOR & RC-300-24 RAINCAPS5 C477-2426 ISC VALVE - 3”6 C477-1615 ISC VALVE - 2”8 N310-24 GLOVE VALVE - 3”9 N310-16 GLOVE VALVE - 2”10 N310-10 GLOVE VALVE - 1 1/4”11 G112 BACKCHECK VALVE12 ME656SP STRAINER - 3’13 LF24X240 3” X 24” FLEX CONNECTOR14 LGLD3F-VB BALCKER PUMP UNIT - 3”15 BV-2-30 BYPASS - 2”16 F195 E.F. VALVE - 3” X 2”17 N550-16 FISHER E.S.V. - 2”19 G201-24 FISHER BACKCHECK20 GC10-15' 1 1/4” X 15’ HOSE ASSEMBLY21 GC16-15' 2” X 15’ HOSE ASSEMBLY22 ME112 ADAPTOR WITH ME179 ACME PLUG & P148CHAINKEY DESCRIPTION23 ME130 ADAPTOR WITH ME181 ACME PLUG& P183 CHAIN24 ME217 ADAPTOR WITH ME229-1 ACME CAP &CHAIN25 ME262 ADAPTOR WITH ME441 ACME CAP & P167CHAINN/S HYDROSTATIC R.V. AS REQUIRED STH 24X16X16ADDITIONAL EQUIPMENT5/6/7 INTERNAL VALVES & ACCESSORIES5/6 P639 PNEUMATIC OPERATORP340 LATCH & REMOTE RELEASE5/6/7 SEE PAGE 14-16 FOR MORE ON ISC’S17/18 N550 ESV’S P539 PNEUMATIC OPERATOR, P327DPNEUMATIC RELEASE, SEE PAGE 17-18 FOR MORE ONESV’S14 MOTORS 7 STARTERS, SEE PAGES 93-94 FOR MOREINFOPROPOSED PIPING SCHEMATIC - PROPANE STORAGECONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 225 -

APPENDIXKEY DESCRIPTION1 LIQ. LEVEL & PRESSURE GAUGE2 FLOAT GAUGE3 J701 THERMOMETER4 H282-250 RELIEF VALVES WITH ME-P104-24PIPEAWAY ADAPTOR & RC-300-24 RAINCAPS5 C477-2426 ISC VALVE - 3”6 C477-1615 ISC VALVE - 2”8 N310-24 GLOVE VALVE - 3”9 N310-16 GLOVE VALVE - 2”10 N310-10 GLOVE VALVE - 1 1/4”12 ME656SP STRAINER - 3’13 LF24X240 3” X 24” FLEX CONNECTOR14 LGLD3F-VB BALCKER PUMP UNIT - 3”15 BV-2-30 BYPASS - 2”16 F195 E.F. VALVE - 3” X 2”17 N550-16 FISHER E.S.V. - 2”19 G201-24 FISHER BACKCHECK20 GC10-15' 1 1/4” X 15’ HOSE ASSEMBLY21 GC16-15' 2” X 15’ HOSE ASSEMBLY22 ME112 ADAPTOR WITH ME179 ACME PLUG & P148CHAINKEY DESCRIPTION23 ME130 ADAPTOR WITH ME181 ACME PLUG & P183 CHAIN24 ME217 ADAPTOR WITH M229-1 ACME CAP & CHAIN25 ME262 ADAPTOR WITH ME441 ACME CAP & P167 CHAINN/S HYDROSTATIC R.V. AS REQUIRED, BULKHEAD OPTIONALADDITIONAL EQUIPMENT5/6/7 INTERNAL VALVES & ACCESSORIES5/6 P639 PNEUMATIC OPERATORP340 LATCH & REMOTE RELEASE5/6/7 SEE PAGE 14-16 FOR MORE ON ISC’S17/18 N550 ESV’S P539 PNEUMATIC OPERATOR, P327DPNEUMATIC RELEASE, SEE PAGE 17-18 FOR MORE ONESV’S14 MOTORS 7 STARTERS, SEE PAGES 93-94 FOR MOREINFOPROPOSED PIPING SCHEMATIC - PROPANE STORAGE- 226 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

APPENDIXTeChniCal RefeRenCesConversion FactorsSI Conversion FactorsMultiply By To ObtainLength and AreaMillimeters 0.0394 InchesMeters 3.2808 FeetSq. Centimeters 0.155 Sq. InchesSq. Meters 10.764 Sq. FeetVolume and MassCubic Meters 35.315 Cubic FeetLiters 0.0353 Cubic FeetGallons 0.1337 Cubic FeetCubic cm. 0.061 Cubic InchesLiters 2.114 Pints (US)Liters 0.2642 Gallons (US)Kilograms 2.2046 PoundsTonnes (metric) 1.1024 Tons (US)Pressure and Flow RateMillibars 0.4018 Inches WCOunces/sq. in. 1.733 Inches WCInches w.c. 0.0361 Pounds/sq. in.Bars 14.50 Pounds/sq. in.Kilopascals 0.1450 Pounds/sq. in.Kilograms/sq. cm. 14.222 Pounds/sq. in.Pounds/sq. in. 0.068 AtmospheresLiters/hr. 0.0353 Cubic Feet/hr.Cubic Meters/hr 4.403 Gallons/min.MiscellaneousKilojoules 0.9478 BTUCalories, kg 3.968 BTUWatts 3.414 BTU per hourBTU 0.00001 ThermsMegajoules 0.00948 ThermsASME Conversion FactorsMultiply By To ObtainLength and AreaInches 25.4 MillimetersFeet 0.3048 MetersSq. Inches 6.4516 Sq. CentimetersSq. Feet 0.0929 Sq. MetersVolume and MassCubic Feet 0.0283 Cubic MetersCubic Feet 28.316 LitersCubic Feet 7.481 GallonsCubic Inches 16.387 Cubic cm.Pints (US) 0.473 LitersGallons (US) 3.785 LitersPounds 0.4535 KilogramsTons (US) 0.9071 Tonnes (metric)Pressure and Flow RateInches w.c. 2.488 MillibarsInches w.c. 0.577 Ounces/sq. in.Pounds/sq. in. 27.71 Inches WCPounds/sq. in. 0.0689 BarsPounds/sq. in. 6.895 KilopascalsPounds/sq. in. 0.0703 Kilograms/sq. cm.Atmospheres 14.696 Pounds/sq. in.Cubic Feet/hr. 28.316 Liters/hr.Gallons/min. 0.2271 Cubic Meters/hr.MiscellaneousBTU 1.055 KilojoulesBTU 0.252 Calories, kgBTU per hour 0.293 WattsTherms 100,000 BTUTherms 105.5 MegajoulesAbbreviationsASME American Society of Mechanical EngineersBTU per hour British Thermal Units per HourCFH Cubic Feet per HourCGA Compressed Gas AssociationCSST Corrugated Stainless Steel TubingDBC Diameter Bolt CircleDOT Department of TransportationFNPT Female National Pipe ThreadFPOL Female POL Portion of CGA 510 Fitting(See POL)GPH Gallons per HourGPM Gallons per MinuteMNPT Male National Pipe ThreadMPOL Male POL Portion of CGA 510 Fitting (See POL)NFPA National Fire Protection AssociationNPT National Pipe ThreadPOL Generic Term For A Compressed GasAssociation Fitting #510psipsidpsigSAESCFHSCFMSCMHPTFEULUNCUNF LHWCWOGPounds per Square InchPounds per Square Inch, Differential PressurePounds per Square Inch GaugeSociety of Automotive EngineersStandard Cubic Feet per HourStandard Cubic Feet per MinuteStandard Cubic Meter per HourPolytetrafluoroethyleneUnderwriters Laboratories Inc.Unified National Course(Defines a thread form/shape)Unified National Fine - Left Hand(Defines a thread form/shape)Water ColumnWater Oil and GasCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 227 -

APPENDIXBASIC FACTSPROPANE BUTANE PROPANE BUTANEOctane numberFormula C3H8 C4H10 (Iso-Octane 100) 125 91Boiling point, °F, atatmospheric pressure -44 31 COMBUSTION DATA:Specific gravity of gasCu. ft. air required to(Air=1) at 60° F, atmospheric pressure 1.53 2.00 burn 1 cu. ft. gas 23.5 30.0Specific gravity of liquid (Water=1) 0.51 0.58 Ignition Temperature 920-1020 900-1000Weight per gallon of liquid at 60° F, Lbs. 4.23 4.87 Maximum flame 3600 3625LIMITS OF INFLAMMABILITY:BTU per gallon (Vaporized) 91,500 102,600 (%OF GAS IN AIR MIXTURE)BTU per pound (Vaporized) 21,560 21,180 % at lower limit 2.4 1.9BTU per cubic foot (Vaporized) 2,500 3,175 % at upper limit 9.5 8.5Cu. ft. of gas/gallon of liquid at 60° F, 36.5 31.0atmospheric pressureCu. ft. of gas/lb. of liquid at 60° F, 8.55 6.51atmospheric pressureTO CONVERT FLOW CAPACITIES OF ONE KIND OF GASTO FLOW CAPACITIES OF A DIFFERENT KIND OF GASIf you have a flow capacity (CFH,etc.) in NATURAL GAS and want toIf you have BUTANE and want toknow equivalent flow capacity of: Multiply by: know equivalent flow capacity of: Multiply by:Propane 0.63 Propane 1.15Butane 0.55 Natural Gas 1.83Air 0.77 Air 1.42If you have AIR and want to knowIf you have PROPANE and want toequivalent flow capacity of: Multiply by: know equivalent flow capacity of: Multiply by:Propane 0.81 Natural Gas 1.59Butane 0.71 Butane 0.87Natural Gas 1.29 Air 1.23COPPER TUBING SIZINGBETWEEN 1ST & 2ND STAGE REGULATORSMaximum propane capacities listed are based on a 10 psig first stage setting and a 1 psig pressure drop. Capacities in 1,000 BTU/HR.TubingREFRIGERATION TUBINGLength (Ft.) 3/8” OD 1/2” OD 5/8” OD 3/4” OD 7/8” OD30 299 726 1367 2329 339440 256 621 1170 1993 299450 227 551 1037 1766 257460 206 499 939 1600 233270 189 459 864 1472 214680 176 427 804 1370 199690 165 401 754 1285 1873100 156 378 713 1214 1769150 125 304 572 975 1421200 107 260 490 834 1216250 95 230 434 739 1076300 86 209 393 670 976To convert to capacities at 5 psig setting with 10% (0.5 psig) pressure drop. multiply values by 0.606.To convert to capacities at 15 psig setting with 10% (1.5 psig) pressure drop. multiply values by 1.380.- 228 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

PIPE SIZINGBETWEEN FIRST STAGE AND SECOND STAGE REGULATORSMaximum propane capacities listed are based on a 10 psig first stage setting and 1 psig pressure drop.Capacities in 1,000 BTU/HRNOMINAL PIPE SIZE, SCHEDULE 40APPENDIXLENGTH 1/2” 3/4” 1” 1 1/4” 1 1/2” 2” 3”IN FEET 0.622 0.824 1.049 1.38 1.61 2.067 3.06830 1843 3854 7259 14904 22331 43008 12118040 1577 3298 6213 12756 19113 36809 10371450 1398 2923 5507 11306 16939 32623 9192060 1267 2649 4989 10244 15348 29559 8328670 1165 2437 4590 9424 14120 27194 7662280 1084 2267 4270 8767 13136 25299 7128290 1017 2127 4007 8226 12325 23737 66882100 961 2009 3785 7770 11642 22422 63176150 772 1613 3039 6240 9349 18005 50733200 660 1381 2601 5340 8002 15410 43421250 585 1224 2305 4733 7092 13658 38483300 530 1109 2089 4289 6426 12375 34868350 488 1020 1922 3945 5911 11385 32078400 454 949 1788 3670 5499 10591 29843450 426 890 1677 3444 5160 9938 28000500 402 841 1584 3253 4874 9387 26449600 364 762 1436 2948 4416 8505 23965700 335 701 1321 2712 4063 7825 22047800 312 652 1229 2523 3780 7279 20511900 293 612 1153 2367 3546 6830 192451000 276 578 1089 2236 3350 6452 181781500 222 464 875 1795 2690 5181 145982000 190 397 748 1537 2302 4434 12494TO CONVERT TO CAPACITIES AT 5 PSIG SETTING WITH 10% (.5PSIG) PRESSURE DROP, MULTIPLY VALUES BY 0.606.TO CONVERT TO CAPACITIES AT 15 PSIG SETTING WITH 10% (1.5PSIG) PRESSURE DROP, MULTIPLY VALUES BY 1.380.PIPE AND TUBING SIZINGSIZING BETWEEN SECOND STAGE REGULATOR AND APPLIANCE“Maximum propane capacities listed are based on a 1/2” W.C. PRESSURE DROP AT 11” W.C. SETTING - CAPACITIES IN 1,000 BTU/HRPIPE ANDTUBINGLENGTH COPPER TUBING SIZE, O.D., TYPE LNORMAL PIPE SIZE, SCHEDULE 40 PIPEIN FEET 3/8" 1/2" 5/8" 3/4" 7/8" 1 1/8" 1/2" 3/4” 1” 1 1/4” 1 1/2” 2” 2 1/2” 3” 4”10 39 92 199 329 501 935 275 567 1071 2205 3307 6221 10140 17990 3671020 26 62 131 216 346 630 189 393 732 1496 2299 4331 7046 12510 2552030 21 50 107 181 277 500 152 315 590 1212 1858 3465 5695 10110 2062040 19 41 90 145 233 427 129 267 504 1039 1559 2992 4778 8481 1730050 18 37 79 131 198 376 114 237 448 913 1417 2646 4343 7708 1573060 16 35 72 121 187 340 103 217 409 834 1275 2394 3908 6936 1415080 13 29 62 104 155 289 89 185 346 724 1086 2047 3329 5908 12050100 11 26 55 90 138 255 78 162 307 630 976 1811 2991 5309 10830125 10 24 48 81 122 224 69 146 275 567 866 1606 2654 4711 9613150 9 21 43 72 109 202 63 132 252 511 787 1496 2412 4281 8736200 8 19 39 66 100 187 54 112 209 439 665 1282 2038 3618 7382250 8 17 36 60 93 172 48 100 185 390 590 1138 1808 3210 6549300 43 90 168 353 534 1030 1637 2905 5927350 40 83 155 325 491 947 1505 2671 5450400 37 77 144 303 458 883 1404 2492 5084CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 229 -

APPENDIXPOLYETHYLENE PIPE AND TUBING (PE 2406/YELLOW)LINE SIZING CHART FOR LP GAS VAPORLine sizing for LP gas vapor between 1st and 2nd stage regulators allowing a pressure drop of 1 psi at 10 psi setting.TUBING 1/2” CTS 1/2” IPS 3/4” IPS 1” CTS 1” IPS 1-1/4” IPS 2” IPSLENGTH SDR7 (.090”) SDR 9.3(.090") SDR 11(.095”) SDR 11.5(.099") SDR 11 (.119") SDR 10 (.166") SDR 11 (.216")(FT)*Maximum LP Gas Vapor Capacity (thousands of BTU/HR)10 1406 4235 8940 10803 16486 28912 8248820 944 2843 6001 7252 11067 19409 5537330 747 2252 4753 5744 8766 15372 4385840 634 1908 4029 4868 7429 13029 3717150 557 1679 3544 4282 6535 11460 3269560 502 1512 3191 3856 5884 10319 2944170 459 1383 2920 3529 5385 9444 2694480 425 1281 2704 3268 4987 8746 2495390 397 1197 2527 3054 4661 8173 23319100 374 1127 2379 2874 4287 7693 21948125 329 991 2092 2528 3858 6766 19305150 296 893 1884 2277 3474 6093 17384175 271 817 1724 2084 3180 5576 15909200 251 756 1597 1930 2945 5164 14733225 235 707 1492 1803 2752 4826 13768250 221 665 1405 1697 2590 4542 12959275 209 630 1330 1607 2452 4300 12268300 199 599 1265 1528 2332 4090 11669350 182 548 1157 1399 2134 3743 10680400 169 508 1072 1295 1976 3467 9890* Total length of piping from outlet of first stage regulator to inlet of farthest second stage regulator.NOTE: Polyethylene pipe/tubing shall be limited to vapor service, not exceeding 30 psig, and must be installed outdoors and underground.The above numbers were calculated by using the Mueller formula for high pressure installations of smooth pipe such as plastic,copper, brass, etc. carrying gas at pressures greater than 1 psig.2 PSI SIZING CHARTCOPPER TUBING AND STEEL PIPE SIZINGMaximum Capacity of Pipe and Tubing in 1000’s BTU of Gas/hr. for Gas Inlet Pressure of 2 PSIG and a Pressure Drop of 1PSIG.Size of Pipe orLength of Pipe or TubingCopperTubing 10’ 20’ 30’ 40’ 50’ 60’ 70’ 80’ 90’ 100’CopperTubing(O.D.)Pipe Size3/8” 451 310 249 213 189 171 157 146 137 1301/2” 1020 701 563 482 427 387 356 331 311 2945/8” 1900 1306 1049 898 795 721 663 617 579 5473/4” 3215 2210 1774 1519 1346 1219 1122 1044 979 9251/2” 2687 1847 1483 1269 1125 1019 938 872 819 7733/4” 5619 3862 3101 2654 2352 2131 1961 1824 1712 16171” 10585 7275 5842 5000 4431 4015 3694 3436 3224 30461 1/4” 21731 14936 11994 10265 9098 8243 7584 7055 6620 62531 1/2” 32560 22378 17971 15381 13632 12351 11363 10571 9918 93692” 62708 43099 34610 29621 26253 23787 21884 20359 19102 18043- 230 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

APPENDIXCONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 231 -

- 232 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 233 -

- 234 -CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293- 235 -

TERMS OF SALE1. APPROVED CREDIT must be established for open account status. Until established, all shipments will beC. O. D. or be charged to a credit card.2. TERMS OF PAYMENT - Net 30 days from the date of invoice. Interest of 3/4% per month will be added toall overdue invoices.3. PRICING - Prices are subject to change without notice. All orders will be billed at current prices on thedate of shipment.4. FREIGHT - All shipments will be via UPS or motor freight. A two dollar box/handling charge will be addedto UPS shipments. Motor freight shipments will be prepaid and added to the invoice. A surcharge of 10%(maximum of $10.00) will be added to freight charges for handling the payment of freight. Motor freightshipments can be shipped freight collect if so requested.5. MINIMUM ORDER - All orders are subject to a $20.00 minimum. Orders for less than $20.00 will beincreased with the same product to reach the minimum.6. DAMAGED SHIPMENTS - Merchandise properly packed and delivered to freight carrier releasesRutherford Equipment from all responsibility. Claims for damaged shipments are the responsibility of andmust be filed by the consignee against the carrier.7. RETURNS - All returns must be approved in advance and issued an RGA number. A 15% restocking feemay be charged.8. WARRANTY - All products are warranted by their manufacturer. Rutherford Equipment will returndefective merchandise to the manufacturer for credit consideration. Rutherford Equipment does notsupplement or extend a manufacturer’s warranty. The manufacturer makes final decisions on warrantyclaims.9. TAX - Any state or federal tax levied against the net sale price is an additional charge to be assumedand paid by the purchaser.10. EXPORT - All pricing and quotes are in U. S. dollars unless otherwise stated in writing. The purchaser mustpay all duties, taxes and exchange rate in currency.11. DEBITS - No debit memorandum will be accepted. Rutherford Equipment will issue prompt credit on allauthorized returns in compliance with our Return Merchandise Policy.12. SPECIAL ORDERS - Orders for special products, not considered by Rutherford Equipment as a stockedproduct, are non-cancelable and non-returnable unless agreed to in advance by our supplier.13. SPECIAL HANDLING - A minimum charge of $30.00 will be added to any order which must be deliveredby Rutherford Equipment to the airport or other point of special shipment.CONYERS, GA (800) 241-5652APOPKA, FL (800) 432-1869GOLDSBORO, NC (800) 426-9293

Your Partner In Growth Since 1960!CONYERS, GEORGIA1981 Gees Mill RoadConyers, GA 30013770-929-1601 • 800-241-5652FAX: 770-929-1730GOLDSBORO, NORTH CAROLINA303 W. Veteran’s DriveGoldsboro, NC 27530919-739-5883 • 800-426-9293FAX: 919-739-5894APOPKA, FLORIDA2577 Clark StreetApopka, FL 32703407-291-1005 • 800-432-1869FAX: 407-291-7237sales@rutherfordequipment.com • www.rutherfordequipment.com