Building Drawings Checklist: Architectural Drawings - National ...

3.15 Do not end the finish grading at a municipal lot line. Grading,including walks and roadways, should meet the city st-reet or curb,3.16 Indicate the location of flagpoles and free-standing signs,, if any.Refer to detail.3.17 Show all the exterior landings, steps, railings, etc. Indicate thefoatet-ials used, Remember to detall these elements.3.18 Show any buried gasoline, oil and gas storage tanks.3-19 Show any existing items to be demolished and removed by thecontr.actor.4. FOrnATLON PLAN4.1 Indtcate the foundation walls, piles, beams, and/or footings for allbearing walls and columns, Refer to the structural drawings.4.2 Show rhe footings and faundations of building components outside thebuilding proper; egg., exterior stairs, ramps, concrete pads atentrances ..4.3 Refer to the foundation component details, if any.4.4 Note the description of the floor slab and its finished elevation,4.5 Indicate any changes in the floor slab thickness', expansion andperimeter joints and the pits to be provided.4.6 Check the openings required ia the foundation wall or slab againstthe mechanical and electrical drawings.4.7 Show the buildfng section and wall eectfon lines.4.8 Indicate the unexcavated areas.5. FLOOR PLANS5.1 Check the structural. drawings to ensure that a11 posts andlorcolumns are indicated in the architectural drawings.5.2 Check against the mecMnical add electrleal drawings to ensure thatall duct, vent and other openings are indicated in the architecturald'rawings .5.3 Indicate all built-in furnishings on the drawings. Items such asslnks, bathtubs, shrwers, refrigerators, kitchen ranges, countersand shelving must be shown.