12.07.2015 Views

SERVICE PROGRAM

SERVICE PROGRAM

SERVICE PROGRAM

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>SERVICE</strong> <strong>PROGRAM</strong>SP 2-201-001NOVEMBER 2007STEP 18: Install the fan belt●●●●Loosely route the serpentine belt as it wasinstalled before removal in Step 6.Using a 1/2” ratchet, loosen the tensionpulley on the front of the engine.Slip the serpentine belt over the tensionpulley and release the tension on theratchet.Check the serpentine belt to ensure that it iscorrectly routed, and properly seated on allaccessory pulleys.STEP 19: Check for fan clearance●●●●●●●●●With the cab still tilted forward:Start the engine.Visually check for fan to fan ring clearance.Using a hydraulic floor jack, raise the frontleftcorner of the chassis 6” and visuallycheck for fan to fan ring seal clearance.Lower the front-left corner of the chassis.Using a hydraulic floor jack, raise the frontrightcorner of the chassis 6” and visuallycheck for fan to fan ring seal clearance.Lower the front-right corner of the chassis.If contact between the fan and fan ring,or contact between the fan and fan ringseal is evident, return to Steps 7 through12 and repeat the radiator shroud and fanring alignment and spacing adjustmentprocedures.Turn the vehicle OFF.STEP 20: Lower the cab●●●Remove the safety pin in the sliding cab tiltlock bar. Place the selector lever on thehydraulic pump to the LOWER position.Insert the pump handle into the pump andoperate the handle in an up and downmotion. The hydraulic cylinders then lowerthe cab until the midpoint (top) is reached.Once the cab has reached its midpoint, stoppumping and the cab will free fall rearwardto the fully lowered position. When the cabis lowered, the hydraulic cab latches willautomatically close, securing the cab to theframe.CAUTIONRemove the pump handle when not in use. It maystick out and could cause injury to passersby.Please direct all questions regarding this serviceprogram to: info@autocartruck.com or call the servicehotline at 877-973-3486 (extension 6062).22 of 22AC-SP-263-0711-P28Questions? Visit the Autocar website atwww.autocartruck.com and click the Web Link Directicon to request emergency service assistance.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!