SERVICE PROGRAM

SERVICE PROGRAMSP 2-201-001NOVEMBER 2007STEP 15: Attach the fan ring seal and metal band●●●●Using a 13/64” drill, bore (4) holes for rivetsthrough the fan ring seal and the radiatorshroud (in the channel which the metal bandwill lie in).The left-side (upper) hole should be drilleddirectly forward of the upper fan ring bracket(Figure 11).The right-side (upper) hole should be drilledbetween the charge air cooler pipe and theupper radiator pipe (Figure 12).The left-side (lower) and right-side (lower)holes should be drilled as low on the radiatorshroud as is possible (Figures 13 and 14).TOP-RIGHT RIVETLOCATIONFigure 12NOTE:NOTE:Place the drilled rivet holes as close as isreasonably possible to the location of the fanring to fan ring bracket attachment points.When drilling the lower holes in theshroud, ensure that the holes are drilledperpendicular to the surface of the radiatorshroud and fan ring seal.LOWER-LEFT RIVETLOCATIONFigure 13TOP-LEFT RIVETLOCATIONLOWER-RIGHT RIVETLOCATIONFigure 11Figure 1420 of 22AC-SP-263-0711-P28Questions? Visit the Autocar website atwww.autocartruck.com and click the Web Link Directicon to request emergency service assistance.