SERVICE PROGRAM

SERVICE PROGRAMSP 2-201-001NOVEMBER 2007REPAIR PROCEDURESTEP 1: Raise the cab●●●●WARNINGDue to the danger of sustaining personal injuryand/or damage to the vehicle, never attempt toraise the cab outdoors under extremely windyconditions. The strong wind conditions couldforce the cab beyond the normal limits of its travel.Remove or secure all loose articles andclose all doors before raising the cab. Thearea above and ahead of the cab must beclear from obstructions. Place front wheelsin a straight ahead position.Remove the pump handle from its storage onthe inside wall of the driver or passenger sidedoor.Place the selector lever on the hydraulicpump in the RAISE position. Insert thepump handle into the pump and operatethe handle in an up and down motion. Thehydraulic cab latches will open, then thehydraulic cylinders will lift the cab until themidpoint (top) is reached.Once the cab has reached its midpoint, thecab will free fall forward to the fully openposition. The safety pin in the cab tilt lockdevice must be installed when the holes lineup in the sliding bar.DANGERNever rely on the hydraulic pressure to hold thecab in an open position. Always use the safety pinin the cab tilt lock tube to prevent serious personalinjury or death.CAUTIONRemove the pump handle when not in use. It maystick out and could cause injury to passersby.Questions? Visit the Autocar website atwww.autocartruck.com and click the Web Link Directicon to request emergency service assistance.11 of 22AC-SP-263-0711-P28