Transcend CPAP User Manual - Direct Home Medical
Transcend CPAP User Manual - Direct Home Medical
Transcend CPAP User Manual - Direct Home Medical
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Page 27<strong>Transcend</strong> Sleep Apnea Therapy <strong>User</strong> <strong>Manual</strong>Replacing the Filter MediaThe <strong>Transcend</strong> Filter Media should be replaced every six months at minimum.1. Remove the Filter Frame by gently pressing the button release at the back of theFilter Frame towards the front of the device. Then pull the filter frame away fromthe device.2. To replace the Filter Media remove the used filter and discard. Lay a new Filter inthe channel on the base of the <strong>Transcend</strong> device.3. Reconnect the Filter Frame to the device by placing the front clip into place first.Once the front clip is in place snap the back clip into place. Make sure the FilterFrame is completely connected before use.Note: If using an earlier generation of the Air Inlet Filter: Remove the Filter Frame (foamwill be attached) and discard. Replace with a new earlier generation Filter Frame.Note: Earlier generation Air Inlet Filters and Filter Frames are not compatible with latergeneration <strong>Transcend</strong> Systems.1Filter FrameFilter Media23
Change language