Transcend CPAP User Manual - Direct Home Medical

Page 19Transcend Sleep Apnea Therapy User ManualUsing the Transcend P 4 Overnight or P 8 Multi-Night Battery (BAT4 or BAT8)The Transcend P 4 Overnight and P 8 Multi-Night Batteries are optional power sources forTranscend. To use, connect the P 4 or P 8 battery outlet cable to the Transcend by insertingthe barrel connector into the power jack on the Transcend. Be sure the power-up LEDflash sequence completes indicating that power is being supplied to the Transcend andthat it has successfully entered Standby Mode.Note Fully charge the battery before the first use. Follow the battery charginginstructions provided in this User Manual. Do not connect the battery to theTranscend during initial charge.Note Use the battery in-line with the AC power supply when possible. Connecting thebattery in-line with the AC power supply allows the battery to charge duringtherapy and provides backup power to provide uninterrupted therapy in the case ofa power outage.Using the Transcend P 4 Overnight or P 8 Multi-Night Battery inconjunction with AC line power1. Insert the barrel plug from the Universal AC Power Supply into the battery.2. Insert the barrel plug of the battery into the Transcend power jack so that the plugand cord face upward.3. Plug the Universal AC Power Supply plug into AC line power.4. The Transcend power-up LED flash sequence should initiate. Once the power-upLED flash sequence is complete the LED lights will turn off. This sequence indicatesthat power is being supplied to the Transcend and that it has successfully enteredStandby Mode.