TimeLOG Version 9.3 - Synel

Creating and Adapting Work Rules TimeLOG Version 9.353 Overlap If there is an overlap in the time band definition for different payment categories thesystem will pay the overlapping time in two categories, when this parameter is defined.Example:If an employee clocked-in and out:between 19:00-22:00 his OT payment will be 150%between 21:00-24:00 his OT payment will be 175%The overlapped time is between 21:00-22:00:Payment for the first three hours - 150%Payment for the last three hours - 175%(For the one hour interval between 21:00-22:00 payment will be for 150% and for 175%)54 Calc TotalBreaks55 Required toclock breaks56 Minimumexit57 T-zoneSchedulerWhen selected the given break time can be split and spread out throughout the day. Forexample, if the given break time is 30 minutes, an employee can take 15 minute in themorning and 15 minute afternoon, or half hour at once.When selected the employee must report going to break otherwise the system reports islogged as exit time and is not recognize as a break.Used to avoid situations where the exit and enter times are less than allowed.This filed is marked to work with a Scheduler setting that has a Time zone set for it (seefield 52 for setting the Time Zone).5.2.2 Non-working day template01414249 50554647If this is selected, the time defined in field 49 and 50 will be recorded regardless of whether or notThis template enables defining time recording in the following situations:• Unworked paid holidays- The employee does not work but receives payment for all or part of the day.• Work on paid holidays- The employee does work and is rewarded with additional day over and abovethe automatic payment for the holiday.55