TimeLOG Version 9.3 - Synel

Installation TimeLOG Version 9.3Step 2.Plug the end of the communication cable into the communication socket on the net connection ofthe TimeLOG clock.Host NET Reader MOD/RELStep 3.Replace the connector cover that was removed in step 1. All cables should be threaded via theback of the TimeLOG clock.2.5 A multi-user installationTimeLOG PRO version can be used as a multi-user system. Install as follows:Step 1. Install according to standard TimeLOG instructions, with one exception: change the destinationdriver from c:\ to server driver f:\.Step 2. For installation of an additional user run the setup.exe file located in the CD TimeLOG in theDrivers folder. One file will be installed on the local drive in the TimeLOG folder. DLL files arelocated in the operating system (WINDOWS| System).Step 3. Create a shortcut icon to operate the exe file for the current version located in the server underTimeLOG folder. (for example: T9-3 for version 9.3)Step 4. Repeat steps 2-3 for all users.Note : When mapping to TimeLOG, make sure the path is one directory upwards to the TimeLOG installationfolder.Example:If TimeLOG is installed in the F:\ATT\TimeLOG directory in G: it will be G=F:\\ATT.23