TimeLOG Version 9.3 - Synel

TimeLOG Version 9.3Manual 1/24/10 Document number TL93-222-01 Catalogue number 650102.This document has been prepared for TimeLOG versions 9.3 and PRO.Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio or television receptionwhich can be determined by turning the equipment off and on, the user is encouraged to try and correct theinterference by one or more of the following measures.• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.• Consult your dealer or an experienced radio/TV technician for help.All rights reserved. Reproduction of use of editorial; or pictorial content without expressed permission isprohibited. No patent liability is assumed with respect to the use of the information contained herein.While every precaution has been taken in the preparation of this manual, Synel Industries Ltd. assumes noresponsibility for errors or omissions. Neither is any liability assumed for damages resulting from the useof the information contained herein.TimeLOG and Synman are trademarks of Synel Industries Ltd.IBM PC is a trademark of IBM Corporation.Windows is a trademark of Microsoft Corporation.All trade names referenced are either trademarks or registered trademarks of their respective companies.2