TimeLOG Version 9.3 - Synel

Access Control Module TimeLOG Version 9.3Step 2.Select Time Zone using the combo box. The following tables appear.Step 3. Click New to define a new Time Zone group. It is recommended to refer to the time frame indicationin your Timezone terminology (Description field).Example:Monday-Friday will indicate the entrance time frame from Monday until Friday, or, weekend will indicate the time framefor weekends only.Step 4.On the right hand-side of the screen all day types will appear (they will appear also as a separatetable in the dictionary). For each day type click on the Time frame field in order to define thetime range:Note: The title on the left hand of the screen will indicate the group description and the day type.Step 5. In order to define a time frame, left click the mouse moving it across the scale (each time unitequals 30 minutes) and marking it with green color. The green color indicates the permitted timeframe. To delete the chosen box you can right click the mouse in the same way as it was used tomark the time frame. For deleting or marking of a single time unit click on the small grey rectanglelocated under each time unit. The Hours button displays the chosen Timezone.Step 6. Repeat this procedure for all day types. Any type of permission should be defined at this stage.Note: Day types are defined by default in Calendar no. 1. If there are more than one you must make surethat all day types in all the calendars are identical. Calendar allocation is performed in the Personnelscreen.190