CA Endevor Change Manager Technical Note: r7 ... - SupportConnect

Post-Installation ConsiderationsThe SP4 maintenance contains an updated Optional Features table andC1DEFLTS macros. Therefore, the defaults and options tables must be reassembledand re-linked to include these changes. Failure to do so will resultin error messages indicating incompatibility during initialization.The SP4 maintenance overlays certain ISPF skeletons, CLISTs, sample JCLstreams, and SCL samples that have been customized during the initialinstallation of CA Endevor and the customization of member CHM7000. Afterthe SMP/E APPLY of SP4, these members need to be modified again to adhereto the site standards. The members are listed in the following table. Failure tomodify the ISPF skeletons and CLISTs listed in this table will cause certainparts of the product to become nonoperational. The list of variables to bechanged can be found in chapter 3 of the Getting Started guide in theCHM7000 Member Command Variables section.PTF NumberP005338P005299P004692P004962P005046P004965P005151P004696P005300P005039P005030P004983Impacted MembersENCOPTBL - ENDEVOR OPTIONAL FEATURES TABLEENCOPTBL - ENDEVOR OPTIONAL FEATURES TABLEENCOPTBL - ENDEVOR OPTIONAL FEATURES TABLEECHALSIT DATABC1JDEFT SAMPENUSMPLDEF SAMPENUENCOPTBL - ENDEVOR OPTIONAL FEATURES TABLE#PSNWDMT - PACKAGE SHIP MODEL DATA#PSXCOMT - PACKAGE SHIP MODEL DATAENDEVOR NATURAL INTERFACE DATA:ECHAAPWBECHAAREBEXITBLKSXIT7NTFY - ENDEVOR/MVS PACKAGE EXIT07 DATAALLOW SPECIFICATION OF PKGISEC IN C1DEFLTSECHALSIT DATABC1JDEFT SAMPENUSMPLDEFT SAMPENUBC1JCSVU SAMPENUENDEVOR SAMPENUC1SB300R SAMPENUBC1JSDEL SAMPENU6 Technical Note: r7 SP4 Upgrade