DOOR CONTROL COLLECTION 2013 - Architectural Hardware Direct

More documents

Recommendations

Info

MECHANICALMECHANICALKey to Finishes and SymbolsBS EN 1154:1996 Explained...FinishesBSSCPEBBright Stainless SteelPolished ChromeElectro BrassPCPNPPVDPolished ChromePolished Nickel PlateStainless BrassSSSSVWHTSatin Stainless SteelSilverWhiteBS EN 1154:1996 is the European standard for controlled door closing devices and, as such, tests mechanical door closer performance.Adopted by EU member states, it became a mandatory requirement for CE marking in 2004. It prescribes the test methodology and subsequent classificationof randomly selected production line products. The test data, together with supporting technical evaluation, results in a classification code.This coding allows comparison across a range of closers according to their compliance with the standard.Door closers for fire doors are covered by a Constructive Products Directive mandate. Compliance with BS EN 1154:1996, supported by suitable evidence,therefore allows the application of the CE mark. All conforming door closers consequently will be marked with their BS EN 1154:1996 coding and details of thenotified certification body.EBPElectro Brass PlateSCSatin ChromeDoor controls with electrical components, such as electromagnetic hold open devices, must also satisfy the requirements of both BS EN 1154:1996 and thesupplementary standard, BS EN 1155:1997 for electrically controlled door operators.PBPolished BrassSNPSatin Nickel PlateSymbolsAPPROVED PRODUCTCertifire is an independent 3rd party scheme providing high quality, voluntary,product conformity for the passive fire sector. The requirements are based onthose of CE marking, but whereas the CE mark reflects compliance with minimumregulatory requirements Certifire is product certification at a higher level.Additional requirements are ISO9001:2008 certification, independent audit testingand a comprehensive field of application document based on carefully chosentests. Designed to give confidence to specifiers, enforcement authorities andbuilding owners/occupiers, the Certifire scheme is recognised by regulatoryauthorities both in the UK and overseas.ELyrGUARANTEEGUARANTEEE CTR ICALyryr10 Year Mechanical Guarantee2 Year Mechanical Guarantee2 Year Electrical GuaranteeDoor Size/MassThe number identifies the power size of the closer as defined by thedoor size and mass. Adjustable power closers are defined by the upperand lower power sizes.Closer SizeMax Door SizeGUARANTEECE Marking is certification to the highest levels of attestation required bythe Construction Products Directive. The CE mark indicates that theproduct has been successfully 3rd party performance/fire tested and thatthe producing factory has passed stringent Factory Production Controlaudits, carried out by a UKAS notified certification body.BS EN 1154BS EN 1155British/European standardrequirements and testingmethods covering controlleddoor closing devices.British/European standardrequirements and testing methodscovering electrically powered holdopen devices for swing doors.FD30FD30/60 FD60 FD30/60/120 FD120/240BS 8300 is the design of buildingsand their approaches to meet theBS EN 1634 PART1:2000 European Fire Safety standard for determining the fire resistanceof door and shutter assemblies, including door hardware. FD30 (30 Minute Fire Doors) FD60(60 Minute Fire Doors) FD120 (120 Minute Fire Doors)FD120 (120 Minute Metal Fire Doors)FD240 (240 Minute Metal Fire Doors).The UK Construction Products Directive requires thatdoor hardware for use on fire doors be safe and durable. It is recommended that doorhardware fitted to fire doors should be CE marked.needs of disabled people.NOTE: BS 8300 Requirements are for thewhole door set and therefore theminimum width of suitable door willincrease when the door is fitted with allother items of ironmongery on site.Category of UseDefines the angle from which the closer will close the door ina controlled manner. Grade 3 will control the door from 105°.Most Carlisle Brass closers will operate from 180° - Grade 4.Test CyclesIncluded in a 500,000 cycle test as defined by Grade 8 the only gradeavailable.1 750mm - 20Kg2 850mm - 40Kg3 950mm - 60Kg4 1100mm - 80Kg5 1250mm - 100Kg6 1400mm - 120Kg7 1600mm - 160Kg4 8 3 1 1 3Corrosion ResistanceA salt spray test is used toascertain corrosion resistancethereby establishing suitability foruse in varying environmentalconditions. Five grades areidentified from 0 (no identifiedresistance) to 4 (very highresistance). All Carlisle Brassclosers achieve at least Grade 3and are suitable for use in wet,polluted environments and mostexterior applications.SafetyThe part of the standard which ensures the operation andsuitability of the closer is hazard free. It provides peace ofmind that the closer operates without risk to the user.Only Grade 1 is identified.Suitable Environments for UseFire BehaviourBased on the results of fire testing to BS EN 1634 ensuringthe door remains closed under temperatures which canexceed 1000°C. Grade 1 is for closers which are deemedsuitable for use on fire doors. Grade 0 are not suitable foruse on fire doors.Housing/DomesticOffice/RetailCommercialHospitals/Government Education Sports Stadia/Institution2 3
Select the Correct Door Closer For Your ApplicationWhich Door Closer?Entry Closers forGeneral ApplicationsMedium FrequencyCommercial ApplicationsHigh FrequencyCommercial ApplicationsFixed RangeVariable Position Template RangeVariable Position Spring RangeDCF2003SVDCF2003SVDCS2024-2026CDG003Jamb Mounted RangeDCT2024High Efficiency Slide ChannelConcealed and SurfaceMounted RangeDCC2003CF-DCC2024SMAA45DCS2024-2026Electromagnetic RangeCDC85SC/RDCC2003CF-DCC2024SMDCEM2003-DCEM3024Transom Closers RangeFloor Springs RangeDCTS100/EN3-DCTS150/EN4DCFS150/EN3-DCFS250/EN44 5
Page 3: ContentsDCF20036DCC2003CF17DCT20247
Page 7 and 8: MECHANICALMECHANICALDCS2024BCOverhe
Page 9 and 10: MECHANICALDCC2024SMSurface Mounted
Page 11 and 12: MECHANICALMECHANICALDCC2024CFConcea
Page 13 and 14: MECHANICALMECHANICALMECHANICALMECHA
Page 15 and 16: MECHANICALMECHANICALDCCEM3024Electr
Page 17 and 18: MECHANICALMECHANICALMECHANICALTrans
Page 19 and 20: 32IndexAA45 29292914,1713,15,16,182
Page 21: Carlisle BrassParkhouse RoadCarlisl

DOOR CONTROL COLLECTION 2013 - Architectural Hardware Direct

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?