HL7 Conformance - Intelerad

Deleted by: Mary Hibroy (May 28, 2010 14:12:54)The following table lists the fields that the IntelePACS sends. For detailedexplanations of these fields, see “Descriptions of Fields for Report Messages” on page45.Seg Field Length DefinitionMSH 3 180 Name of your sending application4 180 Name of your sending facility5 180 Name of receiving application (INTELEPACS)6 180 Name of receiving facility (Intelerad)PID 3 20 Patient ID/MRN5 64 Patient Name7 26 Patient Date of Birth (YYYYMMDD)8 1 Patient Sex (M, F, O, or blank)ORC 2 16 Placer Order Number. This number either comes from theoriginal order that was received from a RIS or generatedby IntelePACS.3 16 Filler Order Number. This number either comes from theoriginal order that was received from a RIS or generatedby IntelePACS.5 2 Order Status. Contains ZZ for final reports and ZY forpreliminary reports. In most cases only final reports aresent from IntelePACS.17 8 Entering OrganizationOBR 2 16 Placer Order Number. This number either comes from theoriginal order that was received from a RIS or generatedby IntelePACS.3 16 Filler Order Number. This number either comes from theoriginal order that was received from a RIS or generatedby IntelePACS.18 16 Accession Number19 16 Requested Procedure ID20 16 Scheduled Step ID (1)25 1 Observation Result Status. Contains P for preliminary, Ffor final, C for addendum, and D for deleted.32 200 Principal Result Interpreter35 200 TranscriptionistOBX 5 64K Observation Value, including the name of the user whodeleted the report and the date on which the report wasdeleted.11 1 Result status. Contains P for preliminary, F for final, C foraddendum, and D for deleted.44