paste opaques - Elephant Dental

ORGANISATION OF SAFETY + ENVIRONMENT SPE-CPO 1/3PRODUCT/SAFETY SPECIFICATION MSDS Version: 3NAME: ALL PASTE OPAQUES AND LINERSRev. Date: 21-mar-20111. Identification of the substance and of the companyManufacturer:Elephant Dental B.V., Verlengde Lageweg 10, 1628 PM Hoorn, The Netherlands,Tel: +31/229-259000, www.elephant-dental.com.*Trade name:Interaction Antagon Paste Opaque / Antagon Interaction Paste Opaque.Interaction Carrara Paste Opaque / Carrara Interaction Paste Opaque.Interaction Sakura Paste Opaque / Sakura Interaction Paste Opaque.Carrara Volumia Liner.Sakura Volumia Liner.Description:Opaque Dental Ceramic, type 1, paste opaque.Product group:Ceramics.GMDN no: 16187.Application domain: dental ceramic for the veneering of restorative systems.Contra-indication:do not use for patients known to be allergic to any of the components.Form:Paste.Packing:syringes of 3.5 gram.Art. no.:see Elephant Dental pricelist.Emergency number: In case of an emergency, call +31-229-259618 (only during working hours).2. Hazards identificationAcute health effects of the paste and dust during processingInhalation:coughing, irritation.Ingestion:coughing, irritation.Skin:irritant.Eyes:irritant.Carcinogenicity:no carcinogenetic effects are known.Medical conditionsaggravated by exposure: pre-existing lung and skin diseases.Potential environmentaleffects:none known.3. Composition/information of ingredients*Ceramic.Composition: CAS-no. Symbol R-phrases Unit RangeComposition contains ceramic frits and inorganic pigments.1,3-Butanediol (C 4 H 10 O 2 ) 107-88-0 Xi R 36/37/38 mass % 20 - 304. First aid measuresInhalation:Ingestion:Skin:Eyes:Other:Special first aid measures:Notes to the physician:fresh air, rest, in case of persistent discomfort, consult a physician.rinse mouth, give plenty of water to drink, rest. In case of persistent discomfort, consult aphysician.rinse and then wash skin with water and soap. In case of persistent discomfort, consult aphysician.rinse with plenty of water for several minutes (remove contact lenses if easily possible), thentake to an ophthalmologist.none.remove contaminated clothes.none.All rights strictly reserved

ORGANISATION OF SAFETY + ENVIRONMENT SPE-CPO 2/3PRODUCT/SAFETY SPECIFICATION MSDS Version: 3NAME: ALL PASTE OPAQUES AND LINERSRev. Date: 21-mar-20115. Fire fighting measuresExplosion limits in air: 1.8 und 15.7 vol%Auto-ignition temperature: 375°CFlammability classification: not known.Extinguishing media: powder, alcohol-resistant foam, water spray, carbon dioxide.Unusual fire and explosionhazards: hazardous fumes like CO and CO 2 .Protection and proceduresfor firefighters:use self-contained breathing apparatus and protective clothing.6. Accidental release measuresPersonal precautions:Environmental precautions:Containment techniques:Evacuation procedures:Reporting requirements:avoid inhalation of dust during processing and contact with eyes or skin. Grinding and/orpolishing only under adequate ventilation.collect leaking and spilled product in sealable containers as far as possible. Wash awayremainder with plenty of water.absorb remaining liquid in sand or inert absorbent and remove to safe place. Wash awayremainder with plenty of water. Wear approved respirators and protective clothing. Usecontainerized disposal. No special precautions are required for ceramic in solid shapes.N/AN/A7. Handling and storageHandling:Storage:grinding: object suction, do not inhale dust and vapors. No special precautions required,when used according to the instructions.store closed and dry.8. Exposure controls / personal protectionApplicable during processingTLV 1,3-butanediol:not established.General recommendations: general and local ventilation and exhaust filtration should be employed.Special precautions: no special precautions required, when used according to the instructions.Respiratory protection: dust mask P1.Skin protection:wear protective clothing and gloves.Eye protection:wear safety glasses, with side protection.Hygienic measures:wash face and/or hands before break and end of work. When using chemicals, read the safetyinstructions before use. Do not eat, drink, or smoke during processing.Form:pasteSmell:noneColor:depending on the colorationDensity: 1.8 - 2.0 g/cm 3Melting interval: 720 – 1070°CSolubility in water:partly soluble.9. Physical and chemical propertiesAll rights strictly reserved

ORGANISATION OF SAFETY + ENVIRONMENT SPE-CPO 3/3PRODUCT/SAFETY SPECIFICATION MSDS Version: 3NAME: ALL PASTE OPAQUES AND LINERSRev. Date: 21-mar-201110. Stability and reactivityStability:ceramic paste opaque has a limited shelf life, see label.Conditions to avoid: none known.Materials to avoid:hydrofluoric acid (HF), ceramics dissolve in HF. Water, 1,3-butanediol is hygroscopic.Hazardous decompositionProducts:no special informationShelf life:ceramic paste opaque has a limited shelf life, see label.Hazardous polymerizationpossible: Yes No11. Toxicological informationIf this product is used properly, no toxic effects can be expected. Tests of cytotoxicity according to ISO 10993 have shown nonegative effects.12. Ecological informationWhen handled correctly there are no ecological effects to be expected.The ceramic part is inert material, the amount of 1,3-butanediol is so small, < 1ml, that there is no danger for theenvironment.13. Disposal considerationsProduct:Packaging:none, the ceramic is inert material; the 1,3-butanediol quantity is so small that there is no risk.disposal in accordance with local regulations.This product is not subject to transport regulations.14. Transport information15. Regulatory informationLabeling according to relevant EU-directives:Symbol: -R-Phrases: -S-Phrases : -Because of the small quantity (1 ml) it is not required to mark the product label with the R&S phrases and safety symbols,according to TRGS 200 (