Download Entire Wenger Equipment Catalog PDF

112 • ACOUSTICAL EQUIPMENTLegacy ® Basic Acoustical ShellUSAGEPortable design allows almost any space to become aperformance venue with simple one-person setupPERFORMANCE REQUIREMENTS• Legacy units promote excellent ensemble andenhance acoustical projection toward the audience• Add additional shells to cover larger areasCONSTRUCTION• Upper panels are flat in standard 1" (2.5 cm) thick.Lower panel is ¾" (2 cm) thick. All are 6' (1.8 m) wide• Lower fixed panel is constructed of ¾" (2 cm)thick composite laminated wood with edgebanding• Easy, intuitive lift mechanism for raising andlowering shell• Canopy folds flat for storage, and middle paneloverlaps bottom panel• Legs protrude in front of shell to provide counterweighted base design• No kicker panel, bottom panel rests 7" (18 cm) from floor• Canopy is 36" (91 cm) high providing less coverage than Legacy Classic model• Fully extended height is 13' 3" (4 m)• Ships partially assembled• Available in Oyster finish only• Canopy adjusts to 45, 60, 75 and 90 degree anglesO R D E R I N G I N F O R M AT I O N186H016 Legacy Basic, Tapered Canopy, 296 lbs (134 kg).................$1,619186H017 Legacy Basic, Rectangular Canopy, 304 lbs (138 kg)..........$1,619Legacy ® Classic Acoustical ShellUSAGEPortable design allows almost any space to becomea performance venue with simple one-person setupPERFORMANCE REQUIREMENTS• Legacy units promote excellent ensemble andenhance acoustical projection toward the audience• Add additional shells to cover larger areasCONSTRUCTION• Panels are flat in standard 1" (2.5 cm) construction,6' (1.8 m) wide• Improved lift mechanism to raise and lower shell• Canopy folds flat for storage and is adjustable to45, 60, 75 and 90 degree angles• Kicker panel provides coverage within 2" (5 cm)of floor, and folds up for storage• All panels fit flush with no overlap shadows• No unsightly exposed fasteners• Fully extended height is 15' 2" (4.6 m)• Canopy is 54" (137 cm) high and available in tapered or rectangular design• In storage position, unit fits through 34" (86 cm) wide by 80" (2 m) high door• Includes counterweighted base system, with no legs protruding in front of shell• Available in four solid color finishesFour solid color laminates: Beige, Oyster,Platinum and Warm Sand• Units nest for storageO R D E R I N G I N F O R M AT I O N186G181 Legacy Classic, Tapered Canopy, 434 lbs (197 kg) .................$2,400186G180 Legacy Classic, Rectangular Canopy, 446 lbs (202 kg) ..........$2,4001-PERSON SETUP1-PERSON SETUPRoll shell into place. Adjustsnap-in pins for desiredcanopy angle.Lift canopy to preset anglefor optimum soundprojection.Turn handle of lift mechanismto set shell height intoperformance position.Roll shell into place. Lower itskick panel and raise and setthe canopy.Use tool to adjust canopyangle for optimumsound projection.Turn handle of lift mechanismto set shell height intoperformance position.INNOVATIVE DESIGN FOREASY SETUPEasy-to-turn handle on theframe raises the shell to themaximum height in just sixturns.INNOVATIVE DESIGN FOREASY SETUPEasy-to-turn handle on theframe raises the shell to themaximum height in just sixturns.Shells nest togetherfor compact storage.Shells nest togetherfor compact storage.Snap-in pin sets canopy toany of 4 preferred angles.Guides allow for smoothheight adjustment andstop panel at full height.A continuous hinge allowscanopy to fold and raiseeasily.Magnetic latch holdspanels in performanceposition.Canopy locks in thedesired position.Panels fit together whenin performance positionwithout overlapping.800.4WENGER (800.493.6437) • www.wengercorp.com