Geo-iNAV⢠- Canal Geomatics
Geo-iNAV⢠- Canal Geomatics
Geo-iNAV⢠- Canal Geomatics
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Geo</strong>-iNAVInertial Navigation Products<strong>Geo</strong>-iNAV GPS OptionsGPS Options Processing Options Horizontal Accuracy 1 Vertical Accuracy 1Commercial L1 Standalone ~1.5 m ~2.5 mL1/L2 RTK ~5 cm ~10 cmSAASM L1/L2 Standalone ~1.0 m ~2.0 mL1/L2 RTK ~5 cm ~10 cm<strong>Geo</strong>-iNAV IMU OptionsIMU Options Update Rate (Hz) Roll/Pitch Accuracy (degrees) 1 Heading Accuracy (degrees) 1Consumer Grade MEMS Up to 1000 ±1° ±2°High-End MEMS 100 ±0.05° ±0.2°Tactical Grade Up to 200 ±0.01° ±0.05°GPS/IMU Combined OptionsCombined GPS/IMU 2 GPS Options IMU Options<strong>Geo</strong>-iNAV Standard L1 Standalone Consumer Grade MEMS<strong>Geo</strong>-iNAV Mid-Grade L1/L2 RTK High-End MEMS<strong>Geo</strong>-iNAV Advanced L1/L2 RTK Tactical Grade1Accuracy is dependent upon GPS satellite system performance, ionospheric conditions, GPS blockage and otherfactors2All GPS options can utilize SAASM GPS receiver<strong>Geo</strong>-iNAV Standard<strong>Geo</strong>-iNAV Mid-Grade<strong>Geo</strong>-iNAV Advanced<strong>Geo</strong>detics, Inc. 2649 Ariane Drive San Diego CA 92117 Phone: (858) 729-0872 Fax: (858) 729-0874 info@geodetics.com
<strong>Geo</strong>-iNAVInertial Navigation ProductsTechnical Specifications - SAASM ConfigurationsSize, Weight and Construction+ 85.6 cubic inches (Internal IMU for Standard configuration, externalIMU for Mid-Grade and Advanced configurations)+ 28.7 oz+ MIL-810E Environmental compliant+ MIL-461 EMI and RFI compliantPower+ 10 - 30 VDC @ 2 Amps minimumInterfaces+ External power connector+ TNC GPS antenna connector+ SMA RF connector for optional internal data link+ 1 Ethernet data port+ 3 RS232 serial ports+ 1PPS output+ IMU connector for external Mid-Grade and Advanced configurations+ 4 status LEDs+ SAASM Keyload connector+ SAASM Zeroize buttonReal-Time Data Output+ TSPI solutions up to the IMU sample rate i.e. 100 Hz., available viaEthernet, RS232 or optional internal wireless data-linkData Recording/Logging+ Full TSPI solutions (position, velocity, attitude)+ Raw GPS and IMU data (for post processing)+ Full diagnosticsWireless Communications Options+ Internal TDMA data-link (various frequencies available)+ AES encryption and Point to Point mode available+ Support for external data link via EthernetGPS Frequency Tracking+ L1/L2 (P/Y code)Key Loading+ DS101 and DS102IMU Support+ Honeywell HG1900+ Honeywell HG1700 Ring Laser Gyro+ Honeywell HG9900 Navigation Grade+ Litton LN200+ KVH 1750+ KVH CG-51+ Support for both AMRAAM and SDLC formats+ Consumer grade MEMS sensors+ Additional IMU’s available upon requestRTK Algorithm+ Precise Instantaneous Network (PIN) Positioning with <strong>Geo</strong>detics’Epoch-by-Epoch® technologySafety and Diagnostics+ Internal safety and monitoring systems+ Internal BIT with operator notificationTemperature+ Operating: -40°F to +185°F (-40°C to +85°C)+ Storage: -67°F to +185°F (-55°C to +85°C)<strong>Geo</strong>detics, Inc. 2649 Ariane Drive San Diego CA 92117 Phone: (858) 729-0872 Fax: (858) 729-0874 info@geodetics.com
Change language