ROCKSTAR III 25/50 - Austin Detonator sro

R O C K S T A R I I I 2 5 / 5 0STANDARD TECHNICAL DESCRIPTIONName ROCKSTAR III 25/50Detonator shell materialAluminum, CopperDelay interval0 ms, 25 ms, 50 msNumber of delay intervals 31Secondary charge720 mg PETN or RDXPrimary chargedextrinated lead azideProducer’s mark (shell bottom)V and delay numberCrimpingtriple crimpPlugantistatic PVCStandard leg wiresCu Ø 0,5 or 0,6 mm; Fe Ø 0,65 mm; (Cu Ø 0,8 mm on special request)Leg wires insulation materialPVC (PE or magnetic PVC on special request)Delay tag marking detonator type (short title), delay #Electrostatic resistivity (for detonatorwith leg wires 3,5 m Fe Ø 0,65 mm)bridge wire2 leg wires / detonator shell15 kV/2000 pF15 kV/2000 pFBridge Wire Resistance0,18±0,02 ΩNo-Fire Current (NFC)1,2 AAll-Fire Curent - serial connection (AFC)3,5 ANo-Fire Impulse (NFI)80,0 mJ/ΩAll-Fire Impulse - serial connection (AFI)140,0 mJ/ΩWater pressure resistivity0,3 Mpa/24 hoursTemperature range for application-30 O C < T < +60 O CShelf live (storage conditions) 2 years (-30 O C to +40 O C)Transport Classification 1.4B 1.4SUN No. 0255 0456Official authority & alternative names CE mark Name1019-012/V/2005 Rockstar III 25/501019-012/V/2005 DEM-S 1,2 25/50Disclaimer of Warranties and Limitations of LiabilitiesProduct described in this bulletin are sold by Austin Detonator s.r.o. without warranty; express implied or statutory or as to MERCHANTABILITY, except as expressly stated in Austin Detonatorstraight bill of lading. Under no circumstances shall seller be liable for loss of anticipated profits, consequential or incidental damages.The product described may be subject to change.For more information and service locations in your area, please contact:Austin DetonatorPhone: +420-571-404-001Jasenice 712Fax: +420-571-404-002755 01 VsetínWeb: www.austin.czCzech Republice-mail: marketing.info@austin.cz© Austin Detonator | v. 221113