GSM 11.11 version 6.2.0 - TTFN Smart card pages

(GSM 11.11 version 6.2.0 Release 1997)79TS 100 977 V6.2.0 (1999-05)- StatusContents:Status byte of the record which can be used as a pattern in the SEEK command. For MS originating messagessent to the network, the status shall be updated when the MS receives a status report, or sends a successfulSMS Command relating to the status report.Coding:b8 b7 b6 b5 b4 b3 b2 b1b8 b7 b6 b5 b4 b3 b2 b1X X 0 free spaceX X 1 used space0 0 1 message received by MS from network; message read0 1 1 message received by MS from network; message to beread1 1 1 MS originating message; message to be sentRFU (see subclause 9.3)X X 1 0 1 MS originating message; message sent to the network:0 0 1 0 1 status report not requested0 1 1 0 1 status report requested but not (yet) received;1 0 1 0 1 status report requested, received but not storedin EF-SMSR;1 1 1 0 1 status report requested, received and storedin EF-SMSR;RFU (see subclause 9.3)- RemainderContents:This data item commences with the TS-Service-Centre-Address as specified in GSM 04.11 [16]. The bytesimmediately following the TS-Service-Centre-Address contain an appropriate short message TPDU asspecified in GSM 03.40 [13], with identical coding and ordering of parameters.Coding:according to GSM 03.40 [13] and GSM 04.11 [16]. Any TP-message reference contained in an MSoriginated message stored in the SIM, shall have a value as follows:message to be sent:message sent to the network:Value of the TP-message-reference:'FF'the value of TP-Message-Reference used in themessage sent to the network.Any bytes in the record following the TPDU shall be filled with 'FF'.It is possible for a TS-Service-Centre-Address of maximum permitted length, e.g. containing more than 18address digits, to be associated with a maximum length TPDU such that their combined length is 176 bytes.In this case the ME shall store in the SIM the TS-Service-Centre-Address and the TPDU in bytes 2-176without modification, except for the last byte of the TPDU, which shall not be stored.10.4.4 EF CCP (Capability configuration parameters)This EF contains parameters of required network and bearer capabilities and ME configurations associated with a callestablished using an abbreviated dialling number, a fixed dialling number, an MSISDN, a last number dialled, a servicedialling number or a barred dialling number.ETSI