GSM 11.11 version 6.2.0 - TTFN Smart card pages

(GSM 11.11 version 6.2.0 Release 1997)68TS 100 977 V6.2.0 (1999-05)Identifier: '6FB6' Structure: transparent OptionalFile size: 1 byteUpdate activity: lowAccess Conditions:READUPDATEINVALIDATEREHABILITATECHV1CHV1ADMADMBytes Description M/O Length1 Automatic answer priority levels M 1 byte- Automatic answer priority levelsContents:For each eMLPP priority level, the capability for the mobile station to answer automatically to incoming calls(with the corresponding eMLPP priority level).Coding:Each eMLPP priority level is coded on one bit. Priority levels allowing an automatic answer from the mobilestation have their corresponding bits set to 1. Priority levels not allowing an automatic answer from themobile station have their corresponding bits set to 0. Bit b8 is reserved and set to 0.Byte 1:b8 b7 b6 b5 b4 b3 b2 b1Automatic answer priority for priority level AAutomatic answer priority for priority level BAutomatic answer priority for priority level 0Automatic answer priority for priority level 1Automatic answer priority for priority level 2Automatic answer priority for priority level 3Automatic answer priority for priority level 40Example: If automatic answer is allowed for incoming calls with priority levels A, 0 and 1, then EF AAeMLPP iscoded '0D'.10.3.26 EF CBMID (Cell Broadcast Message Identifier for Data Download)This EF contains the message identifier parameters which specify the type of content of the cell broadcast messageswhich are to be passed to the SIM.Any number of CB message identifier parameters may be stored in the SIM. No order of priority is applicable.Identifier: '6F48' Structure: transparent OptionalFile size: 2n bytesUpdate activity: lowAccess Conditions:READUPDATEINVALIDATEREHABILITATECHV1ADMADMADMBytes Description M/O Length1-2 CB Message Identifier 1 O 2 bytes3-4 CB Message Identifier 2 O 2 bytes2n-1-2n CB Message Identifier n O 2 bytes- Cell Broadcast Message IdentifierCoding:as in GSM 03.41 [14]. Values listed show the identifiers of messages which shall be accepted by the MS tobe passed to the SIM.Unused entries shall be set to 'FF FF'.ETSI