12.07.2015 Views

GSM 11.11 version 6.2.0 - TTFN Smart card pages

GSM 11.11 version 6.2.0 - TTFN Smart card pages

GSM 11.11 version 6.2.0 - TTFN Smart card pages

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

(<strong>GSM</strong> <strong>11.11</strong> <strong>version</strong> <strong>6.2.0</strong> Release 1997)67TS 100 977 V<strong>6.2.0</strong> (1999-05)Identifier: '6FB5' Structure: transparent OptionalFile size: 2 bytesUpdate activity: lowAccess Conditions:READUPDATEINVALIDATEREHABILITATECHV1ADMADMADMBytes Description M/O Length1 Priority levels M 1 byte2 Fast call set-up conditions M 1 byte- Priority levelsContents: The eMLPP priority levels subscribed to.Coding: Each eMLPP priority level is coded on one bit. Priority levels subscribed to have their correspondingbits set to 1. Priority levels not subscribed to have their corresponding bits set to 0. Bit b8 is reserved and setto 0.Byte 1:b8 b7 b6 b5 b4 b3 b2 b1priority level Apriority level Bpriority level 0priority level 1priority level 2priority level 3priority level 40Example: If priority levels B and 2 are subscribed to, EF eMLPP shall be coded '12'.- Fast call set-up conditionsContents: For each eMLPP priority level, the capability to use a fast call set-up procedure.Coding: Each eMLPP priority level is coded on one bit. Priority levels for which fast call set-up is allowed havetheir corresponding bits set to 1. Priority levels for which fast call set-up is not allowed have theircorresponding bits set to 0. Bit b8 is reserved and set to 0.Byte 2:`b8 b7 b6 b5 b4 b3 b2 b1fast call set-up condition for priority level Afast call set-up condition for priority level Bfast call set-up condition for priority level 0fast call set-up condition for priority level 1fast call set-up condition for priority level 2fast call set-up condition for priority level 3fast call set-up condition for priority level 40Example: If fast call set-up is allowed for priority levels B, 0 and 2, then byte 2 of EF eMLPP is coded '16'.10.3.25 EF AAeM (Automatic Answer for eMLPP Service)This EF contains those priority levels (of the Multi Level Pre-emption and Priority service) for which the mobile stationshall answer automatically to incoming calls.ETSI

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!