GSM 11.11 version 6.2.0 - TTFN Smart card pages

More documents

Recommendations

Info

(GSM 11.11 version 6.2.0 Release 1997)56TS 100 977 V6.2.0 (1999-05)For a phase 2 SIM, the EF shall contain at least two bytes which correspond to the Phase 1 services. Further bytes maybe included, but if the EF includes an optional byte, then it is mandatory for the EF to also contain all bytes before thatbyte. Other services are possible in the future and will be coded on further bytes in the EF. The coding falls under theresponsibility of ETSI.NOTE 1: Service N°8 was used in Phase 1 for Called Party Subaddress. To prevent any risk of incompatibilityService N°8 should not be reallocated.NOTE 2: As the BDN service relies on the Call Control feature, service n°31 (BDN) should only be allocated andactivated if service n°28 (Call control) is allocated and activated.Coding:2 bits are used to code each service:first bit = 1: service allocatedfirst bit = 0: service not allocatedwhere the first bit is b1, b3, b5 or b7;second bit = 1: service activatedsecond bit = 0: service not activatedwhere the second bit is b2, b4, b6 or b8.Service allocated means that the SIM has the capability to support the service. Service activated means thatthe service is available for the card holder (only valid if the service is allocated).The following codings are possible:- first bit = 0: service not allocated, second bit has no meaning;- first bit = 1 and second bit = 0: service allocated but not activated;- first bit = 1 and second bit = 1: service allocated and activated.The bits for services not yet defined shall be set to RFU. For coding of RFU see subclause 9.3.First byte:b8 b7 b6 b5 b4 b3 b2 b1Service n°1Service n°2Service n°3Service n°4Second byte:b8 b7 b6 b5 b4 b3 b2 b1etc.Service n°5Service n°6Service n°7Service n°8The following example of coding for the first byte means that service n°1 "CHV1-Disabling" is allocated butnot activated:b8 b7 b6 b5 b4 b3 b2 b1X X X X X X 0 1If the SIM supports the FDN feature (FDN allocated and activated) a special mechanism shall exist in the SIM whichinvalidates both EF IMSI and EF LOCI once during each GSM session. This mechanism shall be invoked by the SIMautomatically if FDN is enabled. This invalidation shall occur at least before the next command following selection ofeither EF. FDN is enabled when the ADN is invalidated or not activated.If the SIM supports the BDN feature (BDN allocated and activated) a special mechanism shall exist in the SIM whichinvalidates both EF IMSI and EF LOCI once during each GSM session and which forbids the REHABILITATE commandto rehabilitate both EF IMSI and EF LOCI until the PROFILE DOWNLOAD procedure is performed indicating that theME supports the "Call control by SIM" facility. This mechanism shall be invoked by the SIM automatically if BDN isenabled. The invalidation of EF IMSI and EF LOCI shall occur at least before the next command following selection ofeither EF. BDN is enabled when the EF BDN is not invalidated.ETSI
(GSM 11.11 version 6.2.0 Release 1997)57TS 100 977 V6.2.0 (1999-05)10.3.8 EF ACM (Accumulated call meter)This EF contains the total number of units for both the current call and the preceding calls.NOTE:The information may be used to provide an indication to the user for advice or as a basis for thecalculation of the monetary cost of calls (see GSM 02.86 [9]).Identifier: '6F39' Structure: cyclic OptionalRecord length: 3 bytesUpdate activity: highAccess Conditions:READUPDATEINCREASEINVALIDATEREHABILITATECHV1CHV1/CHV2(fixed during administrative management)CHV1ADMADMBytes Description M/O Length1 - 3 Accumulated count of units M 3 bytes- Accumulated count of unitsContents: value of the ACMCoding: see the coding of EF ACMmax10.3.9 EF GID1 (Group Identifier Level 1)This EF contains identifiers for particular SIM-ME associations. It can be used to identify a group of SIMs for aparticular application.Identifier: '6F3E' Structure: transparent OptionalFile size: 1-n bytesUpdate activity: lowAccess Conditions:READUPDATEINVALIDATEREHABILITATECHV1ADMADMADMBytes Description M/O Length1 - n SIM group identifier(s) O n bytes10.3.10 EF GID2 (Group Identifier Level 2)This EF contains identifiers for particular SIM-ME associations. It can be used to identify a group of SIMs for aparticular application.Identifier: '6F3F' Structure: transparent OptionalFile size: 1-n bytesUpdate activity: lowAccess Conditions:READUPDATEINVALIDATEREHABILITATECHV1ADMADMADMBytes Description M/O Length1 - n SIM group identifier(s) O n bytesNOTE:The structure of EF GID1 and EF GID2 are identical. They are provided to allow the network operator toenforce different levels of security dependant on application.ETSI
Page 1:
TS 100 977 V6.2.0 (1999-05)Technica
Page 4 and 5: (GSM 11.11 version 6.2.0 Release 19
Page 12 and 13: CIVILZSÁMBÉKI POLGÁR„ A kis J
Page 54: (GSM 11.11 version 6.2.0 Release 19
Page 105 and 106:
(GSM 11.11 version 6.2.0 Release 19
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
show all

GSM 11.11 version 6.2.0 - TTFN Smart card pages

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?