GSM 11.11 version 6.2.0 - TTFN Smart card pages

More documents

Recommendations

Info

(GSM 11.11 version 6.2.0 Release 1997)46TS 100 977 V6.2.0 (1999-05)Byte 10:b8 b7 b6 b5 b4 b3 b2 b1Byte 11:b8 b7 b6 b5 b4 b3 b2 b1RFUINCREASEINVALIDATEREHABILITATE9.4 Status conditions returned by the cardThis subclause specifies the coding of the status words SW1 and SW2.9.4.1 Responses to commands which are correctly executedSW1 SW2 Description'90' '00' - normal ending of the command'91' 'XX' - normal ending of the command, with extra information from theproactive SIM containing a command for the ME. Length 'XX' of theresponse data'9E' 'XX' - length 'XX' of the response data given in case of a SIM data downloaderror'9F' 'XX' - length 'XX' of the response data9.4.2 Responses to commands which are postponedSW1 SW2 Error description'93' '00' - SIM Application Toolkit is busy. Command cannot be executed atpresent, further normal commands are allowed.9.4.3 Memory managementSW1 SW2 Error description'92' '0X' - command successful but after using an internal update retry routine'X' times'92' '40' - memory problem9.4.4 Referencing managementSW1 SW2 Error description'94' '00' - no EF selected'94' '02' - out of range (invalid address)'94' '04' - file ID not found- pattern not found'94' '08' - file is inconsistent with the commandETSI
(GSM 11.11 version 6.2.0 Release 1997)47TS 100 977 V6.2.0 (1999-05)9.4.5 Security managementSW1 SW2 Error description'98' '02' - no CHV initialized'98' '04' - access condition not fulfilled- unsuccessful CHV verification, at least one attempt left- unsuccessful UNBLOCK CHV verification, at least one attempt left- authentication failed (see note)'98' '08' - in contradiction with CHV status'98' '10' - in contradiction with invalidation status'98' '40' - unsuccessful CHV verification, no attempt left- unsuccessful UNBLOCK CHV verification, no attempt left- CHV blocked- UNBLOCK CHV blocked'98' '50' - increase cannot be performed, Max value reachedNOTE:A Phase 1 SIM may send this error code after the third consecutive unsuccessful CHV verification attemptor the tenth consecutive unsuccessful unblocking attempt.9.4.6 Application independent errorsSW1 SW2 Error description'67' 'XX' - incorrect parameter P3 (see note)'6B' 'XX' # - incorrect parameter P1 or P2 (see ## )'6D' 'XX' # - unknown instruction code given in the command'6E' 'XX' # - wrong instruction class given in the command'6F' 'XX' # - technical problem with no diagnostic given# These values of 'XX' are specified by ISO/IEC; at present the default value 'XX'='00' is the only one defined.## When the error in P1 or P2 is caused by the addressed record being out of range, then the return code '94 02' shall beused.NOTE:'XX' gives the correct length or states that no additional information is given ('XX' = '00').9.4.7 Commands versus possible status responsesThe following table shows for each command the possible status conditions returned (marked by an asterisk *).ETSI
Page 1: TS 100 977 V6.2.0 (1999-05)Technica
Page 4 and 5: (GSM 11.11 version 6.2.0 Release 19
Page 12 and 13: CIVILZSÁMBÉKI POLGÁR„ A kis J
Page 54: (GSM 11.11 version 6.2.0 Release 19
Page 97 and 98:
(GSM 11.11 version 6.2.0 Release 19
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
show all

GSM 11.11 version 6.2.0 - TTFN Smart card pages

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?