GSM 11.11 version 6.2.0 - TTFN Smart card pages

(GSM 11.11 version 6.2.0 Release 1997)43TS 100 977 V6.2.0 (1999-05)Command parameters/data:Byte(s) Description Length1 - 8 UNBLOCK CHV value 89 - 16 New CHV value 89.2.14 INVALIDATECOMMAND CLASS INS P1 P2 P3INVALIDATE 'A0' '04' '00' '00' '00'9.2.15 REHABILITATECOMMAND CLASS INS P1 P2 P3REHABILITATE 'A0' '44' '00' '00' '00'9.2.16 RUN GSM ALGORITHMCOMMAND CLASS INS P1 P2 P3RUN GSM'A0' '88' '00' '00' '10'ALGORITHMCommand parameters/data:Byte(s) Description Length1 - 16 RAND 16Response parameters/data:Byte(s) Description Length1 - 4 SRES 45 - 12 Cipher Key Kc 8The most significant bit of SRES is coded on bit 8 of byte 1. The most significant bit of Kc is coded on bit 8 of byte 5.9.2.17 SLEEPCOMMAND CLASS INS P1 P2 P3SLEEP 'A0' 'FA' '00' '00' '00'NOTE:This command is used by Phase 1 MEs only.9.2.18 GET RESPONSECOMMAND CLASS INS P1 P2 P3GET RESPONSE 'A0' 'C0' '00' '00' lgthThe response data depends on the preceding command. Response data is available after the commands RUN GSMALGORITHM, SEEK (type 2), SELECT, INCREASE and ENVELOPE. If the command GET RESPONSE is executed,it is required that it is executed immediately after the command it is related to (no other command shall come betweenthe command/response pair and the command GET RESPONSE). If the sequence is not respected, the SIM shall sendthe status information "technical problem with no diagnostic given" as a reaction to the GET RESPONSE.Since the MF is implicitly selected after activation of the SIM, GET RESPONSE is also allowed as the first commandafter activation.The response data itself is defined in the subclause for the corresponding command.ETSI