GSM 11.11 version 6.2.0 - TTFN Smart card pages

More documents

Recommendations

Info

(GSM 11.11 version 6.2.0 Release 1997)40TS 100 977 V6.2.0 (1999-05)9.2.2 STATUSCOMMAND CLASS INS P1 P2 P3STATUS 'A0' 'F2' '00' '00' lgthThe response parameters/data are identical to the response parameters/data of the SELECT command in case of an MFor DF.9.2.3 READ BINARYCOMMAND CLASS INS P1 P2 P3READ BINARY 'A0' 'B0' offset high offset low lgthResponse parameters/data:Byte(s) Description Length1 - lgth Data to be read lgth9.2.4 UPDATE BINARYCOMMAND CLASS INS P1 P2 P3UPDATE BINARY 'A0' 'D6' offset high offset low lgthCommand parameters/data:Byte(s) Description Length1 - lgth Data lgth9.2.5 READ RECORDCOMMAND CLASS INS P1 P2 P3READ RECORD 'A0' 'B2' Rec.No. Mode lgthParameter P2 specifies the mode:- '02' = next record;- '03' = previous record;- '04' = absolute mode/current mode, the record number is given in P1 with P1='00' denoting the current record.For the modes "next" and "previous" P1 has no significance and shall be set to '00' by the ME. To ensure phasecompatibility between Phase 2 SIMs and Phase 1 MEs, the SIM shall not interpret the value given by the ME.Response parameters/data:Byte(s) Description Length1 - lgth The data of the record lgth9.2.6 UPDATE RECORDCOMMAND CLASS INS P1 P2 P3UPDATE RECORD 'A0' 'DC' Rec.No. Mode lgthParameter P2 specifies the mode:- '02' = next record;- '03' = previous record;- '04' = absolute mode/current mode; the record number is given in P1 with P1='00' denoting the current record.For the modes "next" and "previous" P1 has no significance and shall be set to '00' by the ME. To ensure phasecompatibility between Phase 2 SIMs and Phase 1 MEs, the SIM shall not interpret the value given by the ME.ETSI
(GSM 11.11 version 6.2.0 Release 1997)41TS 100 977 V6.2.0 (1999-05)Command parameters/data:9.2.7 SEEKByte(s) Description Length1 - lgth Data lgthCOMMAND CLASS INS P1 P2 P3SEEK 'A0' 'A2' '00' Type/Mode lgthParameter P2 specifies type and mode:- 'x0' = from the beginning forward;- 'x1' = from the end backward;- 'x2' = from the next location forward;- 'x3' = from the previous location backwardwith x='0' specifies type 1 and x='1' specifies type 2 of the SEEK command.Command parameters/data:Byte(s) Description Length1 - lgth Pattern lgthThere are no response parameters/data for a type 1 SEEK. A type 2 SEEK returns the following responseparameters/data:Byte(s) Description Length9.2.8 INCREASE1 Record number 1COMMAND CLASS INS P1 P2 P3INCREASE 'A0' '32' '00' '00' '03'Command parameters/data:Byte(s) Description Length1 - 3 Value to be added 3Response parameters/data:Byte(s) Description Length1 - X Value of the increased record XX+1 - X+3 Value which has been added 3NOTE:X denotes the length of the record.9.2.9 VERIFY CHVCOMMAND CLASS INS P1 P2 P3VERIFY CHV 'A0' '20' '00' CHV No. '08'Parameter P2 specifies the CHV:- '01' = CHV1;- '02' = CHV2.ETSI
Page 1: TS 100 977 V6.2.0 (1999-05)Technica
Page 4 and 5: (GSM 11.11 version 6.2.0 Release 19
Page 12 and 13: CIVILZSÁMBÉKI POLGÁR„ A kis J
Page 54: (GSM 11.11 version 6.2.0 Release 19
Page 91 and 92:
(GSM 11.11 version 6.2.0 Release 19
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
show all

GSM 11.11 version 6.2.0 - TTFN Smart card pages

Create successful ePaper yourself

Delete template?

Save as template?