GSM 11.11 version 6.2.0 - TTFN Smart card pages

(GSM 11.11 version 6.2.0 Release 1997)40TS 100 977 V6.2.0 (1999-05)9.2.2 STATUSCOMMAND CLASS INS P1 P2 P3STATUS 'A0' 'F2' '00' '00' lgthThe response parameters/data are identical to the response parameters/data of the SELECT command in case of an MFor DF.9.2.3 READ BINARYCOMMAND CLASS INS P1 P2 P3READ BINARY 'A0' 'B0' offset high offset low lgthResponse parameters/data:Byte(s) Description Length1 - lgth Data to be read lgth9.2.4 UPDATE BINARYCOMMAND CLASS INS P1 P2 P3UPDATE BINARY 'A0' 'D6' offset high offset low lgthCommand parameters/data:Byte(s) Description Length1 - lgth Data lgth9.2.5 READ RECORDCOMMAND CLASS INS P1 P2 P3READ RECORD 'A0' 'B2' Rec.No. Mode lgthParameter P2 specifies the mode:- '02' = next record;- '03' = previous record;- '04' = absolute mode/current mode, the record number is given in P1 with P1='00' denoting the current record.For the modes "next" and "previous" P1 has no significance and shall be set to '00' by the ME. To ensure phasecompatibility between Phase 2 SIMs and Phase 1 MEs, the SIM shall not interpret the value given by the ME.Response parameters/data:Byte(s) Description Length1 - lgth The data of the record lgth9.2.6 UPDATE RECORDCOMMAND CLASS INS P1 P2 P3UPDATE RECORD 'A0' 'DC' Rec.No. Mode lgthParameter P2 specifies the mode:- '02' = next record;- '03' = previous record;- '04' = absolute mode/current mode; the record number is given in P1 with P1='00' denoting the current record.For the modes "next" and "previous" P1 has no significance and shall be set to '00' by the ME. To ensure phasecompatibility between Phase 2 SIMs and Phase 1 MEs, the SIM shall not interpret the value given by the ME.ETSI