12.07.2015 Views

GSM 11.11 version 6.2.0 - TTFN Smart card pages

GSM 11.11 version 6.2.0 - TTFN Smart card pages

GSM 11.11 version 6.2.0 - TTFN Smart card pages

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

(<strong>GSM</strong> <strong>11.11</strong> <strong>version</strong> <strong>6.2.0</strong> Release 1997)33TS 100 977 V<strong>6.2.0</strong> (1999-05)- none.Output:- none.8.15 REHABILITATEThis function rehabilitates the invalidated current EF. After a REHABILITATE function the respective flag in the filestatus shall be changed accordingly. This function shall only be performed if the REHABILITATE access condition forthe current EF is satisfied.If BDN is enabled (see clause 11.5.1) then the REHABILITATE function shall not rehabilitate the invalidated EF IMSIand EF LOCI until the PROFILE DOWNLOAD procedure is performed indicating that the ME supports the "Call controlby SIM" facility (see <strong>GSM</strong> 11.14 [27]).Input:- none.Output:- none.8.16 RUN <strong>GSM</strong> ALGORITHMThis function is used during the procedure for authenticating the SIM to a <strong>GSM</strong> network and to calculate a cipher key.The <strong>card</strong> runs the specified algorithms A3 and A8 using a 16 byte random number and the subscriber authentication keyKi, which is stored in the SIM. The function returns the calculated response SRES and the cipher key Kc.The function shall not be executable unless DF <strong>GSM</strong> or any sub-directory under DF <strong>GSM</strong> has been selected as the CurrentDirectory and a successful CHV1 verification procedure has been performed (see 11.3.1).Input:- RAND.Output:- SRES, Kc.The contents of Kc shall be presented to algorithm A5 by the ME in its full 64 bit format as delivered by the SIM.8.17 SLEEPThis is an obsolete <strong>GSM</strong> function which was issued by Phase 1 MEs. The function shall not be used by an ME of Phase2 or later.8.18 TERMINAL PROFILEThis function is used by the ME to transmit to the SIM its capabilities concerning the SIM Application Toolkitfunctionality.Input:- terminal profile.Output:- none.8.19 ENVELOPEThis function is used to transfer data to the SIM Application Toolkit applications in the SIM.Input:- data string.Output:- The structure of the data is defined in <strong>GSM</strong> 11.14 [27].ETSI

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!