Material Safety Data Sheet - Prof Bunsen

Material Safety Data SheetROSIN (Gum)Issue date: 12 September 2012 MSDS # 1777-11. IDENTIFICATION OF THE MATERIAL AND SUPPLIERProduct Name Rosin (Gum)Company Name Prof Bunsen Science, ABN 31 778 824 604Address12 Xavier Court, Wandana Heights, VIC 3216, AustraliaEmergency Tel. +61 405705009Telephone No. Tel: (03) 5241 9756OtherNamesNameRosin Calophony / Rosin / Violin Rosin2. HAZARDS IDENTIFICATIONHazardClassificationRisk Phrase(s)Safety Phrase(s)HAZARDOUS SUBSTANCE Xi, IrritantNON-DANGEROUS GOODSHazard classification according to the criteria of NOHSCR43 May cause sensitisation by skin contact.S2 Keep out of reach of childrenS24 Avoid contact with skinS37 Wear suitable gloves3. COMPOSITION/INFORMATION ON INGREDIENTSComposition Name CAS # ProportionRosin (Gum) 8050-09-7 100 %4. FIRST AID MEASURESInhalationIngestionRemove the source of contamination and move the victimto fresh air. Have victim blow nose to remove any excessdust. Ensure airways are clear and have qualified persongive oxygen through a face mask if breathing is difficult.If irritation develops and persists seek medical attention.Immediately wash out mouth with water, but do notinduce vomiting unless directed to do so by medicalpersonnel. Get immediate medical attention.

SkinEyeFirst Aid FacilitiesAdvice to DoctorIf irritation develops flush with plenty of water. If irritationcontinues and persists seek medical attention.Check for and remove any contact lenses. If contact withthe eye(s) occur, immediately flush eyes with plenty ofwater for approximately 15 minutes holding eyelids(s)open. If irritation occurs seek medical attention.Eye wash fountains and normal washroom facilities.Dermatitis may result from prolonged or repeatedexposure.5. FIRE FIGHTING MEASURESSuitable ExtinguishingMediaSpecific HazardsHazchem CodeWith small fire use dry chemical powder or with large firewater spray, fog or foam.May be combustible at high temperatures. Fine dustdispersed in air creates a potential dust explosion hazard.None Allocated6. HANDLING AND STORAGEPrecautions for SafeHandlingConditions for SafeStorageEye ProtectionKeep away from heat and sources of ignition. Do notbreathe dust. Keep away from incompatibles such asoxidising agents.Store in a cool well-ventilated area. Keep container tightlyclosed.Safety glasses with side shields or goggles should beworn as described in Australian Standard AS/ANZ 1337 -Eye Protectors for Industrial Applications.7. PHYSICAL AND CHEMICAL PROPERTIESAppearanceMelting Point 70 to 78 °CBoiling PointSolubility in WaterLight yellow, odourless powderNot availableInsolubleSpecific Gravity 1.06 to 1.08 @ 25 °CpH ValueVapour PressureFlash PointFlammabilityAuto-IgnitionTemperatureMolecular WeightNot applicableNot applicable187 °C (closed cup); 205°C (open cup)May be combustible at high temperatures.Not availableNot available8. STABILITY AND REACTIVITYChemical StabilityStable under ordinary conditions of use and storage

Incompatible MaterialsHazardousPolymerizationReactive with oxidising agentsWill not occur9. TOXICOLOGICAL INFORMATIONToxicology Information Oral - LD50 (Rat): Not availableChronic effects onhumansInhalationIngestionSkinEyeChronic Effects10. DISPOSAL11. REGULATORY INFORMATIONThe handling of the rosin in the solid form is expected tobe a low hazard. It may cause skin, eyes and respiratorytract irritation. May cause damage to lungs and skin.Repeated or prolonged inhalation of the rosin dust cancause asthma, an allergic reaction.Hazardous if swallowed. May cause irritation of thedigestion tract.Repeated and prolonged skin contact may cause contactdermatitis, an allergic reaction, as well as eczema.May cause irritation in contact with the eyes.Prolonged or repeated contact with this material mayresult in irritation leading to possible contact dermatitis.Must be disposed of in accordance with federal, state andlocal environment control regulations.Poisons ScheduleHazard CategoryNot ScheduledHarmful, (Xi) IrritantIMPORTANT ADVICE: This MSDS summarizes our best knowledge of the health andsafety hazard information of the product and how to safely handle and use theproduct in the workplace. Each user should read this MSDS and consider theinformation in the context of how the product will be handled and used in theworkplace including its use in conjunction with other products. If clarification orfurther information is needed to ensure that an appropriate risk assessment can bemade, the user should contact Prof Bunsen Science at numbers above.End of MSDS