Clipsal StarServe - Installation Guide, 11635

SECTION 13Clipsal StarServe ® FAQsClipsal StarServe ® Frequently Asked Questions (FAQs)PrefaceClipsal StarServe ® is a distribution system for TV, telephone and data networking. It is a simple system to set up andinstall. Here are some frequently asked questions on Clipsal StarServe ® .Questions and AnswersQ: Can Clipsal StarServe ® distribute digital TV signals?A: YES.Q: Does Clipsal StarServe ® decode digital signals?A: NO. Clipsal StarServe ® will distribute free to air digital signals to digital receivers. You will need a digitaltuner to decode digital signals. This may be an inbuilt tuner or a digital set top decoder.Q: Can Clipsal StarServe ® distribute DVD, subscription TV, video recorders and surveillance cameras?A: YES.Q: Does the Clipsal StarServe ® modulator distribute digital signals?A: NO. The modulator distributes analogue signals. All TVs or tuners must be able to receive analogue signals to viewmodulated channels. Most new plasma screens with inbuilt digital tuners will accept analogue signals but mayrequire a programming code to be entered. Digital modulators are in development and very costly to produce.Q: Can I remotely control my DVD, subscription TV and video from other rooms of the home?A: YES, via the IR target and emitter leads in conjunction with IR compatible products.Q: How many IR targets can be used on one Clipsal StarServe ® system?A: You can have as many targets as the number of outputs on the VDU (eight per VDU).Q: How many main entertainment area locations can be remotely controlled at any one time?A: ONE ONLY. The Clipsal StarServe ® system is designed to distribute devices from ONE main entertainmentarea ONLY that can be remotely controlled. A total of eight devices can be remotely controlled fromthis location.80 INSTALLATION GUIDE