Clipsal StarServe - Installation Guide, 11635

SECTION 9Subscription TV Cabling Requirements/OverviewAustar Cabling Requirements - DomesticAUSTAR COAX CABLING DOES NOT CONNECT TO CLIPSAL STARSERVE ®Austar require two Austar approved RG6 Quad Shield Coax Cables run from the satellite dish mounted on the roof tothe location of the Austar decoder (3105RG6Q3B).The cables must be connected with Austar approved F-Type Compression Connectors (3105RG6FC50). The cablesmust connect to Austar approved TV mechanisms (30PFM). A telephone outlet is required for the inbuilt modem ofthe Austar decoder for communication back to Austar for pay per view functions and billing.Run a category or telephone cable from the Clipsal StarServe ® to the Austar wall plate and terminate to the maintelephone line.Satellite dishRG6 Quadshield CablesFour cables are run from the satellite dish.Two are connected to the wallplate and twoleft coiled in the roofspace for future use.Telephonepatch leadAUS 1 AUS 2 MODEM66 INSTALLATION GUIDE