12.07.2015 Views

Clipsal StarServe - Installation Guide, 11635

Clipsal StarServe - Installation Guide, 11635

Clipsal StarServe - Installation Guide, 11635

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

SECTION 9Subscription TV Cabling Requirements/OverviewFoxtel IQ Cabling Requirements - DomesticFOXTEL IQ COAX CABLING DOES NOT CONNECT TO CLIPSAL STARSERVE ®Foxtel require two Foxtel approved RG6 Quad Shield Coax Cables run from the satellite dish mounted on the roof tothe location of the Foxtel decoder (3105RG6Q3B).The cables must be connected with Foxtel approved F-Type Compression Connectors (3105RG6FC50). The cablesmust connect to Foxtel approved TV mechanisms (30PFM). A telephone outlet is required for the inbuilt modem ofthe Foxtel IQ decoder for communication back to Foxtel for pay per view functions and billing.Run a category or telephone cable from the <strong>Clipsal</strong> <strong>StarServe</strong> ® to the Foxtel wall plate and terminate to the maintelephone line.Satellite dishRG6 Quadshield CablesFour cables are run from the satellite dish.Two are connected to the wallplate and twoleft coiled in the roofspace for future use.Telephonepatch leadFOX 1 FOX 2 MODEMINSTALLATION GUIDE65

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!