Clipsal StarServe - Installation Guide, 11635

Clipsal StarServe - Installation Guide, 11635 Clipsal StarServe - Installation Guide, 11635

12.07.2015 Views

SECTION 8Data Cabling - How to ConnectPatch Panel Setup - Data CablingData cabling is simply a cable connecting two data outlets together to make a ‘data extension cord’. One outlet isinstalled into a wall plate and the other is located in a panel alongside a number of other outlets.The connection of the data outlets are the same at both ends.DATA 1DATA 81 2 3 4 5 6 7 8DATA 2DATA 7DATA 3DATA 6DATA 4DATA 5PCPrinterPC62 INSTALLATION GUIDE

SECTION 8Data Cabling - How to ConnectPatch Panel Connection for Structured Cabling SystemThe telephone patch panel is a simple connection that performs the same function as the telephone card on thecombination VDU.You terminate one telephone line to obtain four outlets for that line. The connections are made internally as part ofthe circuit board. There are two termination points for two incoming telephone lines and four extensions for eachincoming line.To patch a telephone line to an outlet, you will need to use a patch lead. Plug the patch lead into the telephone line yourequire (Line 1 or 2). Then plug the other end of the lead into the data patch panel outlet that is connected to the outletyou want to convert into a telephone line.LINE 1 LINE 21 1 1 1 2 2 2 2TELEPHONEPATCH PANEL4 telephoneextensionsto LINE 14 telephoneextensionsto LINE 2Data outlet used asa telephone outlet11 2 3 4 5 6 7 8DATAPATCH PANELData Angled Patch PanelsTelephone Patch PanelsData Patch PanelsPATCH PANEL/ENCLOSURE COMPATIBILITY CHART3105ABEN 8000LEN 8000MEN 8000PEN*3105APP8/5E ✔ ✔ ✔ ✔3105APP8/6 ✔ ✔ ✔ ✔8052/4RJ ✘ ✘ ✘ ✔8052/4RJSMB ✘ ✔ ✔ ✘8052/4RJDMB ✘ ✘ ✔ ✘8058/8RJ ✘ ✘ ✘ ✔8058/8RJSMB ✘ ✔ ✔ ✘8058/8RJDMB ✘ ✘ ✔ ✘*The 8000PEN is to be phased out during 2006 and replaced by the 3105PENF and 3105PENS.INSTALLATION GUIDE63

SECTION 8Data Cabling - How to ConnectPatch Panel Setup - Data CablingData cabling is simply a cable connecting two data outlets together to make a ‘data extension cord’. One outlet isinstalled into a wall plate and the other is located in a panel alongside a number of other outlets.The connection of the data outlets are the same at both ends.DATA 1DATA 81 2 3 4 5 6 7 8DATA 2DATA 7DATA 3DATA 6DATA 4DATA 5PCPrinterPC62 INSTALLATION GUIDE

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!