Clipsal StarServe - Installation Guide, 11635

SECTION 6Phone/Data Minimum Cabling RequirementsTelephone/Data CablingClipsal StarServe ® uses Category 5e or Category 6 cabling for all telephone, internet, data networking and videodistribution. The part numbers required for the Clipsal solution are as follows:2D4P5IPV3B,BUCategory 5e UTP cable2D4P6IPV3B,BUCategory 6 UTP cableTelephone/Data Outlets and Patch PanelsAll Clipsal telephone, internet and data networking outlets are to be Clipsal Titanium ® outlets. Clipsal Titanium ®outlets are available in Category 5e or Category 6 shuttered or unshuttered versions.In domestic homes Clipsal recommend shuttered outlets, as these will protect the outlet and pins from dust found behindTV cabinets and under carpets.30RJ88SMA5SHCat 5 Shuttered Jack30RJ88SMA5Cat 5 Unshuttered Jack30RJ88SMA6SHCat 6 Shuttered Jack30RJ88SMA6Cat 6 Unshuttered JackPatch LeadsClipsal patch leads are available in Category 5e and Category 6 and comein several different colours and lengths. Clipsal produce specially made 0.2metre patch leads for Clipsal StarServe ® .Required Data ToolsThe termination of the data cabling must be done with a Clipsal / Krone typetool. A cable stripper must be used to strip the sheath of the category cableto avoid the cutting of the conductors, which will affect the performance ofthe installation.3100RJA5VPunchdown Tool54 INSTALLATION GUIDE