Clipsal StarServe - Installation Guide, 11635

SECTION 5Video Distribution - How to ConnectConnecting More Than Eight OutputsThe Clipsal 8000IREX is used to expand the IR system of the Clipsal 3105VDU38IRT and the 8073/8VHPIR VideoDistribution Units (VDU). It provides up to 64 outputs with IR control (eight VDUs using the outputs from the master VDU).The 8000IREX passes IR signals from the expansion VDUs to the master VDU. All broadband and modulated signalsbrought to the master VDU are available at the expansion VDU outputs with no signal loss.• Each expansion VDU must be powered by its own separate power supply• Modulators connected to the expansion VDUs will only be viewable on outputs from that expansion VDU.To any output portTo any output port8000IREX8000IREXMaster VDUExpansion VDU outletswith IR targets canremotely control themaster VDU inputs withIR emitters.Expansion VDUExpansion VDUINSTALLATION GUIDE53