Clipsal StarServe - Installation Guide, 11635

SECTION 5Video Distribution - How to ConnectModulator Input A - Single Surveillance Camera‘MOD INPUT A’ is used for devices not requiring IR remote control such as surveillance cameras. A modulator is connectedto ‘MOD INPUT A’ via a RG6 Quad Shield Coax Cable. Refer to the modulator diagram below for connection details.The camera is connected to the modulator via the RCA connections. This enables the camera to be viewed from anyTV connected to a Clipsal StarServe ® VDU output.Things to consider:• Location of modulator – where are you going to put it?• How are you going to power the camera – locally or remotely?• How many cameras are you going to have – how many channels do you require?ModulatorF-Type to RCA adaptorF-Type connectorRG6 QuadCoax CableF-Type toRCA adaptorF-Type connectorto either an RCAor BNC adaptorF-Type toBNC adaptorSingle cameramodulatedthroughInput ‘A’A one-piece connector provides the best quality connection of devices.An adaptor is suitable for the majority of installations.50 INSTALLATION GUIDE