Clipsal StarServe - Installation Guide, 11635

More documents

Recommendations

Info

SECTION 5Video Distribution - How to ConnectSetup of the ModulatorThe back of the modulator has four RCA inputs for active devices such as subscription TV decoders, DVDs, DVRs etc. TheCH refers to the modulator channel input. The input is indicated on the front of the modulator by the letters A – B – C – D.The Modulator is located in the same area as your DVD, subscription TV decoder and video.CBDAUse the UP and DOWNpush buttons to selectthe UHF channel requiredThe screen will indicate theUHF channel the selectedinput will be broadcast onPush select buttonto change fromA, B, C and DSTEP 2 Available channelsSTEPS 1 & 3are UHF 21-69Before you program a UHF channel you must make sure that the UHF frequency is not being used in your region. IfUHF frequencies are being used in your region, you must have at least two-channel separation from the broadcastedchannels. The reason for this is that the signals can spill over to adjacent channels resulting in poor picture qualityfor adjacent channels.Example: SBS is broadcast on UHF 33 - you cannot use channel 32, 33, 34, but you can use channel UHF 35.• Step 1: Select the input CH A, B, C or D you wish to set.• Step 2: Use the up and down push buttons to select the UHF channel you require. The channel will be displayed inthe channel window next to the up and down push buttons.• Step 3: Push the select button again and repeat the process for other input CHs. Your UHF channel has now beenprogrammed. You will need to do an auto search on your TV to tune into these new channels.44 INSTALLATION GUIDE
SECTION 5Video Distribution - How to ConnectModulator AV ConnectionsConnection of an AV device such as a DVD to the modulator requires a set of AV leads.8072VMPIRConnection of TWO devices with IR capability8074VMPIRConnection of FOUR devices with IR capability3105AVL318HQVideo Leads8074VMPIRModulatorINSTALLATION GUIDE45
Page 1: INSTALLATION GUIDEHomeNetworkingSol
Page 4 and 5: SECTION 1 What is Clipsal StarServe
Page 6 and 7: SECTION 2Introduction to MATV Basic
Page 12 and 13: SECTION 3Clipsal StarServe ® Produ
Page 33 and 34: SECTION 4Minimum TV Cabling Require
Page 41 and 42: SECTION 5Video Distribution - How t
Page 43: SECTION 5Video Distribution - How t
Page 55 and 56: SECTION 6Phone/Data Minimum Cabling
Page 57 and 58: SECTION 7Telephone/Internet - How t
Page 63 and 64: SECTION 8Data Cabling - How to Conn
Page 65 and 66: SECTION 9Subscription TV Cabling Re
Page 67 and 68: SECTION 9Subscription TV Cabling Re
Page 69 and 70: SECTION 10Cabling ConsiderationsKey
Page 71 and 72: SECTION 10Cabling ConsiderationsKey
Page 73 and 74: SECTION 11Clipsal Audio SolutionsIn
Page 75 and 76: SECTION 11Clipsal Audio SolutionsCl
Page 77 and 78: SECTION 12Troubleshooting GuidesInf
Page 79 and 80: SECTION 12Troubleshooting Guides3 M
Page 81 and 82: SECTION 13Clipsal StarServe ® FAQs
Page 84: INSTALLATION GUIDECLIPSAL STARSERVE

Clipsal StarServe - Installation Guide, 11635

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?