12.07.2015 Views

Clipsal StarServe - Installation Guide, 11635

Clipsal StarServe - Installation Guide, 11635

Clipsal StarServe - Installation Guide, 11635

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

SECTION 5Video Distribution - How to ConnectAntenna OutputsThe <strong>Clipsal</strong> <strong>StarServe</strong> ® Video Distribution Unit (VDU) has either four, six or eight output ports depending on themodel used.MODEL 3105VDU24T 3105VDU38IRT 8072/6VHP 8073/8VHPIROUTPUTS 4 8 6 8These output ports are connected to devices such as TVs, video recorders, personal video recorders and digital settop decoders. In fact any device that requires an antenna input connection could be connected to these outputs.Each output of the VDU will have the same signal strength.For optimum performance set the VDU output signal strength to 72dBuV.LONGESTCABLE RUNSHORTESTCABLE RUNMaximum distancefrom VDU45 Metres65 - 72dBuvMinimum distancefrom VDU1 Metre65 - 72dBuvMeasure each outlet with afi eld strength meter andmake sure you have idealsignal strength42 INSTALLATION GUIDE

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!