Clipsal StarServe - Installation Guide, 11635

SECTION 3Clipsal StarServe ® Product IntroductionModulatorsModulators connect active devices such as your subscription TV decoder and DVD player so that they can be distributedto all other TV outlets connected to Clipsal StarServe ® . The modulator converts video composite signals into analogueUHF frequencies. Your TV or tuner must be able to receive analogue frequencies for modulated channels.8071VMP – Single Channel ModulatorSingle channel modulators will distribute one device to any TV connected to Clipsal StarServe ® . A single channelmodulator is generally used for the distribution of surveillance cameras at the front door.8072VMPIR – 2 Channel ModulatorTwo channel modulators will distribute two devices such as subscription TV and a DVD player. This model is IR enabled toallow for the remote controlling of devices in other rooms over the coax cable. Up to four devices can be controlled usingdual emitter leads.8074VMPIR – 4 Channel ModulatorFour channel modulators will distribute four devices such as subscription TV, DVD, video and a digital set top box toall outlets connected to Clipsal StarServe ® .This model is IR enabled to allow for the remote controlling of devices in other rooms over the coax cable. Up to eightdevices can be controlled using dual emitter leads.Modulator locatedin your MAINENTERTAINMENT AREA26 INSTALLATION GUIDE