Nitrogen Gas Springs and Accessories - Electronic Fasteners Inc
Nitrogen Gas Springs and Accessories - Electronic Fasteners Inc Nitrogen Gas Springs and Accessories - Electronic Fasteners Inc
RM-150Mini Spring — Self Contained OnlyThe RM 150 is designed for smaller higher speed dies.The Mini-Spring can be dropped into a spring pocket orflange mounted at the top or bottom of the body.The RM 150 is both rechargeable and repairable.Initial Force At Different Pressuresfor Model RM-150Nitrogen Pressure (bar) 24 min, 180 max.Spring Force (lbs.)Spring Force (N)0 20 40 60 80 100 120 140 160 180 20050045040035030025020015010050000 500 1000 1500 2000 2500 3000Nitrogen Pressure (psi) 350 min, 2600 max.2000150010005005 / .20Note: Flange will be attached to the topgroove unless specified at time of order.Optional FlangeSold SeparatelyOrder No. F25-BNote: Maximum charging pressure is2600psi. Springs will be shipped at 2600psi(179 bar) unless otherwise specified at timeOrdering Information — RM-150OrderNumberSpring Force Maximum L@ 2600 psi (179 bar) Stroke + 0-1mmInitial Full Stroke S + 0-.04"L min.L-SRM 150-010 10 / .39 65 / 2.56 55 / 2.17RM 150-012 12.7 / .50 70.4 / 2.77 57.7 / 2.27RM 150-016 16 / .625 77 / 3.03 61 / 2.40RM 150-025 450 lbs. 630 lbs. 25 / .98 95 / 3.74 70 / 2.76RM 150-038 (2002 N) (2803 N) 38 / 1.50 121 / 4.77 83 / 3.27RM 150-050 40% 50 / 1.97 145 / 5.71 95 / 3.74RM 150-063 Force Increase 63.5 / 2.50 172 / 6.77 108.5 / 4.27RM 150-080 80 / 3.15 205 / 8.07 125 / 4.92RM 150-100 100 / 3.94 245 / 9.65 145 / 5.71Dimensions in millimeters / inches
Raymond ®REStripper Springs — Self Contained OnlyThe Raymond stripper springs are both rechargeableand repairable. The springs are available in two smalldiameters and a variety of stroke lengths. The RE 24model has a roller ball on the top of the piston to helpabsorb axial forces. This feature allows the spring toapply a uniform force to a moving component. TheRE 16 model has a rounded piston for point contact.Applications such as providing tension on a moving beltare ideal for the RE 24 model. The springs can handlerates up to 80 strokes/min. Minimum charging pressureis 290psi. For high cycle life it is advantageous to limitimpact loading.Installation ToolSold SeparatelyMaximum charging pressure is 1015 psi (70bar) for model RE 16 and 2175 psi (150 bar)for model RE 24.Order SpringNumber ModelSP6 RE 16SP7 RE 24Ordering Information — RE-16 and RE-24MaximumOrder Spring Force L min.Stroke LNumberL-SInitial Full Stroke SA B C DRE 16-020 Spring Force 20 / 0.79 100 / 3.94 80 / 3.15RE 16-030 @ 1015 psi (70 bar) 30 / 1.18 120 / 4.72 90 / 3.54RE 16-040 40 / 1.57 140 / 5.51 100 / 3.94RE 16-050 50 / 1.97 160 / 6.30 110 / 4.33RE 16-060 44.5 lbs. 80.0 lbs 60 / 2.36 180 / 7.09 120 / 4.72 6 / 0.24 M16 X 1.5 14 / 0.55 35 / 1.38RE 16-070 (198 N) (356 N) 70 / 2.76 200 / 7.87 130 / 5.12RE 16-080 80 / 3.15 220 / 8.66 140 / 5.51RE 16-100 100 / 3.94 260 / 10.24 160 / 6.30RE 24-020 Spring Force 20 / 0.79 100 / 3.94 80 /3.15RE 24-030 @ 2175 psi (150 bar) 30 / 1.18 120 / 4.72 90 / 3.54RE 24-040 40 / 1.57 140 / 5.51 100 / 3.94RE 24-050 50 / 1.97 160 / 6.30 110 / 4.33RE 24-060 380 lbs. 513 lbs. 60 / 2.36 180 / 7.09 120 / 4.72 12 / 0.47 M24 X 1.5 22 / 0.87 40 / 1.57RE 24-070 (1690 N) (2282 N) 70 / 2.76 200 / 7.87 130 / 5.12RE 24-080 80 / 3.15 220 / 8.66 140 / 5.51RE 24-100 100 / 3.94 260 / 10.24 160 / 6.30Dimensions in millimeters / inches
- Page 1: Raymond®Nitrogen Gas Springs and A
- Page 5 and 6: Raymond ®RD-19Disposable Mini Spri
- Page 7: Raymond ®RD-150Disposable Mini Spr
- Page 11 and 12: Ordering Information — RCT 300 th
- Page 13 and 14: Mounting plate “J” for Models R
- Page 15 and 16: Model TRaymond ®All Threaded (Also
- Page 17 and 18: Ordering Information — RG-750 thr
- Page 19 and 20: Mounting plate “J” for Models R
- Page 21 and 22: Mounting Arrangements for RG 750 th
- Page 23 and 24: Ordering Information — RS-1000 th
- Page 25 and 26: RH 500 through RH 2200 cont.Flange
- Page 27 and 28: Raymond ®Control PanelOrder No. SP
- Page 29 and 30: Hose Fittings — 9/16"-18" — O-R
- Page 31 and 32: Flange Stripper Top MountRaymond ®
- Page 33 and 34: RW-R Roller Cam Wedge UnitRaymond
- Page 35 and 36: RW-A Roller Cam Wedge UnitRaymond
- Page 37 and 38: Raymond ®RRRoller CamRaymond Rolle
- Page 39 and 40: Model RR 15 Roller CamRaymond ®Ord
- Page 41 and 42: Raymond ®Ordering Information —
- Page 43 and 44: Raymond ®RPPneumatic Pin Extractor
- Page 45 and 46: Spare Parts and AccessoriesRaymond
- Page 47 and 48: Typical Applications for Nitrogen G
- Page 49 and 50: How to OrderNitrogen Gas SpringsOrd
- Page 51 and 52: NotesRaymond ®
RM-150Mini Spring — Self Contained OnlyThe RM 150 is designed for smaller higher speed dies.The Mini-Spring can be dropped into a spring pocket orflange mounted at the top or bottom of the body.The RM 150 is both rechargeable <strong>and</strong> repairable.Initial Force At Different Pressuresfor Model RM-150<strong>Nitrogen</strong> Pressure (bar) 24 min, 180 max.Spring Force (lbs.)Spring Force (N)0 20 40 60 80 100 120 140 160 180 20050045040035030025020015010050000 500 1000 1500 2000 2500 3000<strong>Nitrogen</strong> Pressure (psi) 350 min, 2600 max.2000150010005005 / .20Note: Flange will be attached to the topgroove unless specified at time of order.Optional FlangeSold SeparatelyOrder No. F25-BNote: Maximum charging pressure is2600psi. <strong>Springs</strong> will be shipped at 2600psi(179 bar) unless otherwise specified at timeOrdering Information — RM-150OrderNumberSpring Force Maximum L@ 2600 psi (179 bar) Stroke + 0-1mmInitial Full Stroke S + 0-.04"L min.L-SRM 150-010 10 / .39 65 / 2.56 55 / 2.17RM 150-012 12.7 / .50 70.4 / 2.77 57.7 / 2.27RM 150-016 16 / .625 77 / 3.03 61 / 2.40RM 150-025 450 lbs. 630 lbs. 25 / .98 95 / 3.74 70 / 2.76RM 150-038 (2002 N) (2803 N) 38 / 1.50 121 / 4.77 83 / 3.27RM 150-050 40% 50 / 1.97 145 / 5.71 95 / 3.74RM 150-063 Force <strong>Inc</strong>rease 63.5 / 2.50 172 / 6.77 108.5 / 4.27RM 150-080 80 / 3.15 205 / 8.07 125 / 4.92RM 150-100 100 / 3.94 245 / 9.65 145 / 5.71Dimensions in millimeters / inches