Nitrogen Gas Springs and Accessories - Electronic Fasteners Inc

Spare Parts and AccessoriesRaymond ®Repair KitsThere is one repair kit for each modelregardless of the stroke length. Order byquantity and model. Note that the RSseries has two models, so please be sureto specify top or bottom fill.Example: 5 RG750 Repair KitsGuide Driver SleevesThese are used to drive the guide or base downwardto expose the retaining ring for removal duringrebuilds. Select the appropriate sleeve based on thespring model independent of the stroke. ConsultRaymond for RH and RE series springs.Tee HandlesUsed to extract internal componentsduring rebuilding process.Order No. SP18AFor M6 piston rods;RM150 and RG250 seriesOrder No. SP19For M8 piston rods;RG750 to RG7500 seriesRCT seriesOrder No.SPA1SPA2SPA3SPA4SPA5SPA6SPA7Spring ModelsRM150, RS1000RG250, RS1800RG750, RS4700RG1500, RS7500RG3000, RS11800RG5000, RS18300RG7500Order No. SP17AFor G 1/8 piston rods and base plates;RS seriesValve Core Tool and Valve PliersThe valve core tool is used to unscrewand tighten the valve core contained infill port of the spring.The valve core pliers are used toremove the valve core after it hasbeen unscrewed by the valve coretool or exposed by removing the valveset screw.Order No. SP63Order No. SP62