Nitrogen Gas Springs and Accessories - Electronic Fasteners Inc

Spare Parts and AccessoriesTest FixtureOrder No. SP11This test fixture checks the strength ofgas springs with an analog output inpounds/force. This can be an invaluabletool when initially charging gas springs orchecking the force during routine maintenance.The force range is accurate from500 to 12,000 lbs.Test Fixture for Lighter LoadsOrder No. SP12This testing fixture is similar to testfixture SP11 but with a force rangefrom 50 to 1,000 lbs.Gas Charging SystemsOrder No. SP13QC2For charging self-contained gas springsThis system is capable of charging all self-contained gassprings in our line when used in conjunction with theappropriate charging adapters listed separately to the right.The adapters attach via a quick couplerprovided with the charging unit.Adapters are not includedwith the SP13QC2,they must bepurchasedseparately. Theend connection tocustomer suppliednitrogen bottle is aCGA 580.Order No. SP14-580 or SP14-680For charging UniForce System gas springsEach unit consists of aregulator with outputand bottle pressuregauges,10 feet of highpressure hose,shutoff valveand a femalequick couplerwhich connects tothe control panel(see page 25). Twoversions of the chargingunit are available for connection to either a CGA580(low pressure) or a CGA680 (high pressure) nitrogenbottle fitting. Charging adapters may be purchasedseparately, making the SP14 capable of fillingself-contained gas springs.Order No. SP13QC1This unit adapts the SP14UniForce Charging Unit for fillingself-contained gas springs.The appropriate quick coupleradapters which snap into thespring fill port should be orderedseparately.Charging Adapters andQuick CouplerThe adapters make it possible to charge Raymond gassprings with any of the Raymond charge assemblies shownat left or certain competitor charging systems. All adapterscontain male quick couplers for easy end connections.Order No. SP20For G 1/8 fill ports;RG series:750-7500RS series: allOrder No. SPQCThe female quickcoupler permitsuse of theRaymond chargingadapters withsome competitorcharging units.The coupler containsa 1/4" NPTfemale thread.Order No. SP21AFor non-counterboredM6 fill portsas follows;RD, RM and REseries: allRG250 series:non-counterboredfill portsGas Draining SystemsOrder No. SP21BFor counterboredM6 fill ports;RG250 series:counterbored fillportsRCT seriesThe two gas draining accessoriesprovide a quick, simple way to drainboth the M6 and G 1/8 gas springs.Order No. SP19For all springswith G 1/8fill portsOrder No. SP18For all springswith M6 fill ports