Nitrogen Gas Springs and Accessories - Electronic Fasteners Inc
Nitrogen Gas Springs and Accessories - Electronic Fasteners Inc Nitrogen Gas Springs and Accessories - Electronic Fasteners Inc
RV Pneumatic VibratorAdjustable Supports for trays greater than 2 ft. in length.Ordering Information — RV 12-S through RV 50-SOrder Number L1 Min. L1 Max.RV 12-S 38.5 / 1.52 51 / 2.01RV 25-S 51 / 2.01 76 / 2.99RV 50-S 76 / 2.99 126 / 4.96Application ExampleDimensions in millimeters / inches
Raymond ®RPPneumatic Pin ExtractorThe Raymond Pneumatic Pin Extractor is used toremove or insert die set pins. The extractor is ideal forhigh volume applications. It requires little maintenanceand has low air consumption.The unit can handle guide pins up to 0.63" (16mm)in diameter. Each pin extractor is supplied with5 extraction screws and is compact, light weight andeasy to handle. The unit also features a recessedon/off switch to help improve operator control andprevent accidental activation.Extraction ScrewsThe Pin Extractor IsSupplied With ExtractionScrews Listed Below.R Pin DiameterM4 6M5 8M6 10R Pin DiameterM8 12, 13, 14M10 16Working SequenceThreading Of TheExtraction Screw.IntroducingThe Clamp.Ordering Information — RP 20Clamping Of TheExtraction Screw.Extraction.The Pin ExtractorCan Be Used ToReinsert The Pins.Order Maximum Extracting Hammering Working Air ConnectionNumber Pin Diameter Frequency Weight Pressure Consumption ThreadRP 20 16 / .63 3000 strokes/min. 4.85 lb/2.2 kg 85.3 psi/5.8 bar 17.7 ft 3 / min. 1/4" BSPDimensions in millimeters / inches
- Page 1: Raymond®Nitrogen Gas Springs and A
- Page 5 and 6: Raymond ®RD-19Disposable Mini Spri
- Page 7 and 8: Raymond ®RD-150Disposable Mini Spr
- Page 9 and 10: Raymond ®REStripper Springs — Se
- Page 11 and 12: Ordering Information — RCT 300 th
- Page 13 and 14: Mounting plate “J” for Models R
- Page 15 and 16: Model TRaymond ®All Threaded (Also
- Page 17 and 18: Ordering Information — RG-750 thr
- Page 19 and 20: Mounting plate “J” for Models R
- Page 21 and 22: Mounting Arrangements for RG 750 th
- Page 23 and 24: Ordering Information — RS-1000 th
- Page 25 and 26: RH 500 through RH 2200 cont.Flange
- Page 27 and 28: Raymond ®Control PanelOrder No. SP
- Page 29 and 30: Hose Fittings — 9/16"-18" — O-R
- Page 31 and 32: Flange Stripper Top MountRaymond ®
- Page 33 and 34: RW-R Roller Cam Wedge UnitRaymond
- Page 35 and 36: RW-A Roller Cam Wedge UnitRaymond
- Page 37 and 38: Raymond ®RRRoller CamRaymond Rolle
- Page 39 and 40: Model RR 15 Roller CamRaymond ®Ord
- Page 41: Raymond ®Ordering Information —
- Page 45 and 46: Spare Parts and AccessoriesRaymond
- Page 47 and 48: Typical Applications for Nitrogen G
- Page 49 and 50: How to OrderNitrogen Gas SpringsOrd
- Page 51 and 52: NotesRaymond ®
Raymond ®RPPneumatic Pin ExtractorThe Raymond Pneumatic Pin Extractor is used toremove or insert die set pins. The extractor is ideal forhigh volume applications. It requires little maintenance<strong>and</strong> has low air consumption.The unit can h<strong>and</strong>le guide pins up to 0.63" (16mm)in diameter. Each pin extractor is supplied with5 extraction screws <strong>and</strong> is compact, light weight <strong>and</strong>easy to h<strong>and</strong>le. The unit also features a recessedon/off switch to help improve operator control <strong>and</strong>prevent accidental activation.Extraction ScrewsThe Pin Extractor IsSupplied With ExtractionScrews Listed Below.R Pin DiameterM4 6M5 8M6 10R Pin DiameterM8 12, 13, 14M10 16Working SequenceThreading Of TheExtraction Screw.IntroducingThe Clamp.Ordering Information — RP 20Clamping Of TheExtraction Screw.Extraction.The Pin ExtractorCan Be Used ToReinsert The Pins.Order Maximum Extracting Hammering Working Air ConnectionNumber Pin Diameter Frequency Weight Pressure Consumption ThreadRP 20 16 / .63 3000 strokes/min. 4.85 lb/2.2 kg 85.3 psi/5.8 bar 17.7 ft 3 / min. 1/4" BSPDimensions in millimeters / inches