Nitrogen Gas Springs and Accessories - Electronic Fasteners Inc

More documents

Recommendations

Info

RXFlange StrippersFlange strippers are engineered for use in flangingdies to strip and elevate parts after the flanging orflange-pierce operation. Two models are available inthree strokes; 1.97" (50mm), 3.15" (80mm) and 3.95"(100mm). One model is designed to be mounted oneither the top/wall or bottom/wall. The other model isattached using a top mount. The Raymond flangestripper provides an engineered stock componentfor use in your flanging die, eliminating costly inhouse design and manufacturing time. An adjustingstop is located on the side of each unit which allowsthe spring to be locked in place for easy set-up andinstallation.The lifting force in the unit is supplied by aRaymond nitrogen gas spring with a maximum forceof 450 lbs (2000N).The slide surface is graphite impregnated bronzewhich requires no lubrication.Flange Stripper Top/Wall or Bottom/Wall MountCustomerSuppliedHardenedEnd CapCustomerSuppliedStripperPlateOrdering Information — RX 050W through RX 100WOrderNumberStroke L L1 L2 L3RX 050W 50 / 1.97 196 / 7.72 125 / 4.92 100 / 3.94 80 / 3.15RX 080W 80 / 3.15 256 / 10.08 155 / 6.10 130 / 5.12 110 / 4.33RX 100W 100 / 3.94 296 / 11.65 175 / 6.89 150 / 5.91 130 / 5.12* Extraction ForceInitial Full Stroke112 lbs. (498 N) 146 lbs. (649 N)225 lbs. (1001 N) 281 lbs. (1250 N)337 lbs. (1500 N) 438 lbs. (1948 N)450 lbs. (2002 N) 584 lbs. (2598 N)* Each model is available with four standard initial forces; 112 lbs, 225 lbs, 337 lbs, or 450 lbs. Please specify at time of order.Dimensions in millimeters / inches
Flange Stripper Top MountRaymond ®CustomerSuppliedHardenedEnd CapCustomerSuppliedStripperPlateOrdering Information — RX 050F through RX 100FOrderNumberStroke L L1RX 050F 50 / 1.97 196 / 7.72 125 / 4.92RX 080F 80 / 3.15 256 / 10.08 155 / 6.10RX 100F 100 / 3.94 296 / 11.65 175 / 6.89* Extraction ForceInitialFull Stroke112 lbs. (498 N) 146 lbs. (649 N)225 lbs. (1001 N) 292 lbs. (1299 N)337 lbs. (1500 N) 438 lbs. (1948 N)450 lbs. (2002 N) 584 lbs. (2598 N)* Each model is available with four standard initial forces; 112 lbs, 225 lbs, 337 lbs, or 450 lbs. Please specify at time of order.Dimensions in millimeters / inchesCentered SheetBending The FlangePress Return StrokeFlange Removal
Page 1: Raymond®Nitrogen Gas Springs and A
Page 5 and 6: Raymond ®RD-19Disposable Mini Spri
Page 7 and 8: Raymond ®RD-150Disposable Mini Spr
Page 9 and 10: Raymond ®REStripper Springs — Se
Page 11 and 12: Ordering Information — RCT 300 th
Page 13 and 14: Mounting plate “J” for Models R
Page 15 and 16: Model TRaymond ®All Threaded (Also
Page 17 and 18: Ordering Information — RG-750 thr
Page 19 and 20: Mounting plate “J” for Models R
Page 21 and 22: Mounting Arrangements for RG 750 th
Page 23 and 24: Ordering Information — RS-1000 th
Page 25 and 26: RH 500 through RH 2200 cont.Flange
Page 27 and 28: Raymond ®Control PanelOrder No. SP
Page 29: Hose Fittings — 9/16"-18" — O-R
Page 33 and 34: RW-R Roller Cam Wedge UnitRaymond
Page 35 and 36: RW-A Roller Cam Wedge UnitRaymond
Page 37 and 38: Raymond ®RRRoller CamRaymond Rolle
Page 39 and 40: Model RR 15 Roller CamRaymond ®Ord
Page 41 and 42: Raymond ®Ordering Information —
Page 43 and 44: Raymond ®RPPneumatic Pin Extractor
Page 45 and 46: Spare Parts and AccessoriesRaymond
Page 47 and 48: Typical Applications for Nitrogen G
Page 49 and 50: How to OrderNitrogen Gas SpringsOrd
Page 51 and 52: NotesRaymond ®

Nitrogen Gas Springs and Accessories - Electronic Fasteners Inc

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?