Nitrogen Gas Springs and Accessories - Electronic Fasteners Inc

RXFlange StrippersFlange strippers are engineered for use in flangingdies to strip and elevate parts after the flanging orflange-pierce operation. Two models are available inthree strokes; 1.97" (50mm), 3.15" (80mm) and 3.95"(100mm). One model is designed to be mounted oneither the top/wall or bottom/wall. The other model isattached using a top mount. The Raymond flangestripper provides an engineered stock componentfor use in your flanging die, eliminating costly inhouse design and manufacturing time. An adjustingstop is located on the side of each unit which allowsthe spring to be locked in place for easy set-up andinstallation.The lifting force in the unit is supplied by aRaymond nitrogen gas spring with a maximum forceof 450 lbs (2000N).The slide surface is graphite impregnated bronzewhich requires no lubrication.Flange Stripper Top/Wall or Bottom/Wall MountCustomerSuppliedHardenedEnd CapCustomerSuppliedStripperPlateOrdering Information — RX 050W through RX 100WOrderNumberStroke L L1 L2 L3RX 050W 50 / 1.97 196 / 7.72 125 / 4.92 100 / 3.94 80 / 3.15RX 080W 80 / 3.15 256 / 10.08 155 / 6.10 130 / 5.12 110 / 4.33RX 100W 100 / 3.94 296 / 11.65 175 / 6.89 150 / 5.91 130 / 5.12* Extraction ForceInitial Full Stroke112 lbs. (498 N) 146 lbs. (649 N)225 lbs. (1001 N) 281 lbs. (1250 N)337 lbs. (1500 N) 438 lbs. (1948 N)450 lbs. (2002 N) 584 lbs. (2598 N)* Each model is available with four standard initial forces; 112 lbs, 225 lbs, 337 lbs, or 450 lbs. Please specify at time of order.Dimensions in millimeters / inches