Nitrogen Gas Springs and Accessories - Electronic Fasteners Inc

Mounting Arrangements for RG 250 through RG 7500Type “H"Reversible LugsThe center-to-center dimensions ofthe bolts comply with Automotive OEMstandards. If your application calls forthe bolts to enter from the base end,the depth of recess machined intothe tool for the mount should be22.6mm / .89", with a tolerance of+0.55mm– 0.0mm / +02"–0.0.Note: Spring must be rigidly backedin both cases. Black oxide finish.For use with Self-contained andUniForce springs.Alt. 1Typical ApplicationGas spring shaft up.Mount to plate or dieshoe.Counterborediameter –GCounterboredepth –H3 LugsE Dia.Alt. 2Typical ApplicationGas spring shaft upor inverted. Mountedin cavity in die shoe.2 or 4 LugsE Dia.Order Number Spring Model A D E F G HF50 H RG 750 31.7 / 1.25 10.5 / .41 88.9 / 3.50 107.9 / 4.25 18 / .70 10.4 / .41F75 H RG 1500 38.1 / 1.50 13.5 / .53 120.6 / 4.75 152.4 / 5.00 20 / .78 13.5 / .53F95 H RG 3000 38.1 / 1.50 13.5 / .53 146.0 / 5.75 177.8 / 7.00 20 / .78 13.5 / .53F120 H RG 5000 38.1 / 1.50 13.5 / .53 165.1 / 6.50 196.8 / 7.75 20 / .78 13.5 / .53Type “B"Square FlangeThe flange is divided into two equalhalves and is secured with four bolts.Black oxide finish. For use withSelf-contained and UniForce springs.Square FlangeC Dia.F Dia.Order Number Spring Model A B C D E F G HF38 B RG 250 55 / 2.17 40 / 1.57 56.6 / 2.23 38.5 / 1.51 34.5 / 1.36 7 / .28 5 / .20 7 / .27F50 B RG 750 75 / 2.95 56.5 / 2.22 79.9 / 3.14 50.5 / 1.99 44.5 / 1.75 9 / .35 24 / .94 12 / .47F75 B RG 1500 100 / 3.94 73.5 / 2.89 103.9 / 4.09 75.5 / 2.97 68.5 / 2.70 11 / .43 24 / .94 12 / .47F95 B RG 3000 120 / 4.72 92 / 3.62 130.1 / 5.12 95.5 / 3.76 88.5 / 3.48 13 / .51 24 / .94 12 / .47F120 B RG 5000 140 / 5.51 109.5 / 4.31 154.9 / 6.10 120.5 / 4.74 113.5 / 4.47 13 / .51 24 / .94 12 / .47F150 B RG 7500 190 / 7.48 138 / 5.43 195.2 / 7.68 150.5 / 5.93 143.5 / 5.65 17.5 / .69 24 / .94 12 / .47Type “C"Reinforced Square FlangeThis mounting is a reinforced versionof standard Type “B”. It is mostcommonly used on larger model gassprings which have a stroke of100mm / 4" or greater. Includessquare flange “B” and reinforcingflange. Black oxide finish. For usewith Self-contained springs only.Square FlangeReinforcement FlangeSquare FlangeF Dia.Order Number Spring Model A B C D E F G HF38 C RG 250 55 / 2.17 40 / 1.57 56.5 / 2.22 38 / 1.50 33 / 1.30 7 / .275 40 / 1.57 17 / .65F50 C RG 750 75 / 2.95 56.4 / 2.22 80 / 3.15 50 / 1.97 43 / 1.69 13 / .51 52 / 2.05 22 / .87F75 C RG 1500 100 / 3.94 73.5 / 2.89 104 / 4.09 75 / 2.95 68 / 2.68 13 / .51 77 / 3.03 22 / .87F95 C RG 3000 120 / 4.72 92 / 3.62 130 / 5.12 95 / 3.74 87 / 3.42 17 / .67 97 / 3.82 24 / .95F120 C RG 5000 140 / 5.51 109.5 / 4.31 155 / 6.10 120 / 4.72 112 / 4.41 17 / .67 122 / 4.80 24 / .95Dimensions in millimeters / inchesC Dia.